How To Setup Launch Control on ANY FPV Drone
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- How-To setup and use Betaflight's launch control feature. Although this is primarily for racing drones, you can set this up on any drone running Betaflight 4.0 or newer.
CLI:
set launch_control_mode = PITCHONLY
set launch_trigger_allow_reset = ON
set launch_trigger_throttle_percent = 30
set launch_angle_limit = 15
set osd_warn_launch_control = ON
save
__________________________________________________________________________
***Banggood Discount Codes***
www.banggood.c...
8% off FPV products - - - - Parts8
11% off For new customers - - - - - Toysho
10% off Eachine - - - - - BGEachine10
__________________________________________________________________________
Support the channel by clicking these affiliate links when purchasing parts at these sites!
RDQ - www.racedayqua...?aff=58
BetaFPV - betafpv.com?sca_ref=1435233.qFHxUmh5f2
Banggood - www.banggood.c...
Starter FPV Drone Kit with everything you need: www.banggood.c...
My Favorite Pre-Built Drones
Geprc Cinelog 25: bit.ly/3ikKDRa
BetaFPV Pavo 360: bit.ly/3IPimhT
iFlight Titan XL5: www.banggood.c...
Digital DJI System
DJI FPV Goggles V2: bit.ly/3qfTEzr
Caddx Polar Vista: bit.ly/3tsqTSp
Frames
iFlight XL5: bit.ly/3wfgwTr
Steele 5” Budget Frame (Apex Clone): www.banggood.c...
Flight Controllers
Mamba F722s: www.banggood.c...
HGLRC 60a Stack: www.banggood.c...
Motors
6s Xilo Stealth Motors - bit.ly/3fdnVqu
iFlight XING Motors - www.banggood.c...
Emax ECO II Motors: bit.ly/34QovLv
Analog VTX/Camera:
Camera: bit.ly/3u2VJQl
VTX: bit.ly/3tiDKGv
TX/RX
TBS Crossfire:
ELRS rx: bit.ly/3CC661m
ELRS tx: bit.ly/3MWPUNc
R9M rx: bit.ly/3COm7Sb
R9M tx: bit.ly/3tst3Bv
Highly Recommended Tools:
Electric Multi-tool: www.banggood.c...
Soldering Iron: amzn.to/3q3pXku
Motor Grip Pliers: www.banggood.c...
LiPo Battery Voltage Tester: bit.ly/3u97Ewc
Other Equipment:
My Backpack: bit.ly/3IeyY12
Naked GoPro Hero 8 Case & BEC: bit.ly/3yuWjI5
Naked GoPro 6 Case & BEC: www.banggood.c...
Balance Lead GoPro power cable: www.banggood.c...
DJI Air 2 S: amzn.to/3wfAxcy
GPS Module: bit.ly/3u3VTqR
QX7 Controller: www.banggood.c...
GoPro Hero 9: amzn.to/349z9Ju
GoPro Hero 10: amzn.to/3ILPAyC
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
hot tip: don't copy code/console input text out of formatted docs like google or word, whitespace and other wonky formatting characters can come along for the ride and cause all kinds of havoc. always copy from a plain text source like notepad ;D
How do you reset after doing what you just warned against?
Another tip, you can always paste as plain text without any formatting using control+shift+v on Windows, or cmd+shift+v on Mac/Linux.
This is exactly what I needed to finally start using launch control
Yeah I like they way you just right to the point. Didn’t go into the historical usage of launch control, ideal scenarios you’d use launch control, other pointless things. Great video!
Thanks for the snippet of code it works
I just stumbled across your video. great video. I was wondering how they were launching like that I've been trying to do it manually and having a horrible time. Didn't even know launch control was a thing till now. Amazing video easy to follow along
I didnt know launch control was a thing either and ive been flying FPV freestyle for 2 years lol
Glad I could help!
@@flyineyeaerialfpv5592 right I'm about 2 years in
I learned something new today.
Thank you! This was what i was looking for.
Thanks for this video. In what fly mode do you have to be in for this to work. I assume you can't have it in angle mode with launch control, do you have to be only in acro mode?
Thank you. Everything worked except the OSD part as it says it's not a valid command? Any tips?
i like the way you kept it simple. thanks for the tuto man!
Glad it helped!
Best drone tip of the year ,thank,you.
Nice tips man, recently trying to figuring out how launch control mode work and i didn't really know because I'm still new at it
I'll set this up today. Thanks for this video
🤙🤙
If you get an error about the OSD warning line, that's because:
"Added in 4.2: The OSD warning will start to blink when the throttle gets within 10% of the trigger percentage. Provides a visual indication that the throttle is close to triggering a launch." (from BF Docs)
That's is awesome... I will definitely will give that one a go. Thanks for the video
Down to what matters.
In my opinion a perfect tutorial :)
Thanks! I do my best to keep this stuff as simple and to the point as possible 👍👍
Best,simple and clear,
Thnks a lot sir..
Massive help thanks, I'm going out with my neighbour tomorrow who builds longbows and we're following an arrow shoot... that's if the arrow doesn't hit the drone first! :)
That’s super cool. Thanks for sharing.
Subbed👊🏻
Hey again :D May I ask how to remove these commands or undo what I program? Thank you!
Thanks for easy guide!
you'd flick it off though if you crash to turtle and take off normally right?
Yes, if you crash and need to use turtle mode, you will probably have to disable launch control.
Very cool 👍🏽💯💯 learn a new thing everyday
Glad the video helped! 🙌
Hi.. Why my drone cant switch to launch control mode.. I have set everything like you do.. My quad get air mode when connect to battery.. And i cant switch to launch control mode
Great video Thank you!!!!!!!
Very cool. Thanks for the tutorial
Really helpfull !! Thk Bud..!!
Very cool, does the switch just turn off after you're in the air?
Yup! Once you're in the air you don't have to worry about the switch, you can fly as normal 👍
Thankss for this!
Nice one man, I was wondering what launch control did.
Racer i'think
Glad the video helped! 🙌
can you do launch control on tiyhawk freestyle (2 if u have it) I wanna see how it goes
its the exact same process displayed in this video 😉👍
ik how to lol . But i was just wondering what the launch looks like. I did it with mine and it is sweet. I have my anglee at 50 and my launch at 50. Tysm for the easy tutorial
Do u have the link to betaflight? I want to betaflight but there's no option for connect in top rite corner.
if error try this one :
set launch_control_mode = PITCHONLY
set launch_trigger_allow_reset = ON
set launch_trigger_throttle_percent = 30
set launch_angle_limit = 8
set osd_warn_launch_control = ON
what happen if you want to go back to the original settings and you dont want to use launched control any more?
So cool ! Thanks ! I will try that ! 🚀😎
Thanks...
So if you set the launch control switch does it mean that it is already your arming switch and disable the arming switch?
I dont think so. That would be nice. I have done it on my th2 freestyle. My radio is emax e8. So it only has 4 switchs. One is arming, one is modes, one is beeper and one is launch control. The launch control doesnt start te motors unfortuantly
Need to set your tigger higher.. like at least 50%.. my racers if you use Launch angle 70° and trigger 65% you leave a launch stand pretty much level with the ground
Yes if you’re a more experienced pilot I would use those numbers. I don’t think everyone would be comfortable with such an aggressive launch though, especially for newer pilots.
Pitch forward, throttle up....
When i arm my fpv it goes little bit in forward direction what is the issue
how can u change settings. just do the command again but with diffrent vallues?
Hello! May I ask something? I have my Acro/Angle mode in one switch, do I need to have the launch mode on an other switch? Or when you flip to launch it goes acro anyway? Thanks!!!
When you enable Launch mode, the drone will automatically be in acro 👍
@@TRONCATFPV So if I have a 3 way switch (1- angle 2- acro - 3 launch) when I flip into launch I get the acro mode until I change it into something else, thank you!!!
Can I just "mirror" that mode with the arm mode? My main is a Tango 2 so switches are scarce
Technically you could
Thanks for chare 👌
I have a arris250 I can not connect to beta flight. Any idea for me to connect it.
THANK YOU!!!
Hi from 🇹🇹Trinidad
@TRONCAT FPV I got a question. My hawk Pro is doing launch control by default. I dont even have launch control in the modes page set up to anything. How do I disable it in CLI? I will enable it later.
Thats interesting, are you sure its launch control and not just a delayed arm? On my buddies tinyhawk freestyle we would arm it and it would take 2-3 seconds before it armed.
In CLI you can type "Get Launch" and it will give you all of the parameters for launch control
@@TRONCATFPV I managed to fix my problem. Thanks!
Do you simply take launch control off by unselect it in modes and don’t have to worry about the codes or you need to reset the codes to factory for normal
since its on a switch, you can just flick the switch into the off position and can fly normally 👍
@@TRONCATFPV awesome. Once it’s launched do you have to switch to off immediately or you can leave it one
@@TRONCATFPV If i wanted to rmove the launch control from my quad, do i just turn it off in betaflight and forget about the CLI?
@@lifeon2wheels1990 just leave the switch on. Wont affect the flying
Thanks TronCat!!!!!
hi, can i use launch mode in angle mode ?
yup!
Fcking lovely is it save for drone itself Im not talking about flying I mean flightcontroller cli code etc?
I followed the set up but the pitch won't stay in place when i let go of the right stick. Is this the launch_control_gain i need to increase? i have a Babyhawk HD 2 by the way. Thanks in advance!
Nvm, I wasn't in acro.. lol
I had the same problem, even in acro mode
How to connect the drone to betaflight?
Nice
Does it matte if I have airmode on or should I switch it of?
Usually for bigger drones I keep airmode on. Smaller drones I keep airmode on a switch 😉
@@TRONCATFPV ok i Followed the Tutorial And my launch control works fine thanks!
can i use a momentary switch for it?
No for this you need to use a switch that will stay in place
Technically you could use a momentary switch but then you would have to keep the switch teiggered till you are in the air (really not recommended).
@@Zockerzimmer could you flash opentx to a fs-i6x and make a momentary to a non momentary?
Can digital use?
Any drone???? Or a bf drone lol
Bf and it’s not new it’s like 3 years old at this point 😬
Works with any quad. But its for racing. It had no point in freestyle.