VW Passat CC 2010 EPB reset. Parking brake error see owner's manual.
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Warning message and the yellow light are constantly on any time the parking brake is activated. Bought a new switch from the dealer for $130 no difference. Also tried one from Aliexspress for only $4 with the same result. Attempted PBS reset but it also didn't help. At this point, I realised that there are only two more steps left: PB module software upgrade and if this will not help then module replacement.
I ended up replacing the module at a local mechanic. Replaced with a second-hand one to save some $. Total: $980 including labour.
Thanks for watching. Good luck with your car!
Support my channel www.paypal.com...
Oooh, a cliffhanger ! 😆
Driver side fuse box remove fuse 29 and 30. Beeping and error message stopped.
I hope your comment can stay on the top as it is an easy fix to try out :)
im gonna try, just got back from my mechanic with this problem, its beeping non stop when i drive
@@marcoallin 4 Months since I've unplugged it and driving better than ever. No beep!
@@FromanVince ive noticed that there arent any fuse at that spot on mine, will try some other
@@alecovchinnikov8724 will parking brake will still working if i take it out??? as i have this beeping but parking brake works fine!! please reply .
I am having same problem there is no fault code also autohold is not working
Same problem 2012 Passat 1.6. How did you sort your problem ????
The explanation is below the video.
Sir, I have same problem, Can you give me more details which parts you have changed, As I can't locate the parts PB module. My car is 2009 passat CC. . MANY THANKS
Here it is Parking Brake Control Module For V W PASSAT OEM:3AA 907 801 H 3AA907801H
Unfortunately it's very hard to replace. it requires reprogramming the module so not every workshop will do it.
thanks for your response. I can find how to code and programe in Ross Tech by using VCDS. But I do not know how to replace this hardware module. no video demo could be found in TH-cam. In fact, not much technician in Hong Kong know how to replace and do the coding. Anyway thanks for your help.
@@happy40032002 Can't find it. But it resides under the torpedo between front seats.
@@alecovchinnikov8724 many thanks
I have the same problem, but on my car (P) is blinking. I don't know what is a problem. Everything worka perfect, but why is blinking P? I have 2012 cc, with different epb knob.
Mine is steady😔😔
There should be a troubleshooting section in your car manual. See what that would mean there.
It can be some error that is fixed by resetting the system and removing the error log.
@@alecovchinnikov8724 thank you
I have the same problem and I have not found a solution to it
In this case, you may have a problem with your PB module. I would suggest you running the car as is while find a mechanic who can fix this. Consider buying this module from e-bay or amazon. Otherwise, it can be very expensive to fix.
So what happened? Did it worked?
I ended up replacing the module at a local mechanics. Replaced with a second hand one to save some $. Total: $980 including labour.
@@alecovchinnikov8724which module?
I tried this method and after that my car won't start and it shows msg on screen depress the clutch . Any idea what's gone wrong even mechanic can't do any thing I asked him to change the clutch sensor and he might will tomorrow change it .
This method resets your car settings to factory. I don't think it may have caused any problem to your car. However, if you accidentally connected your battery the wrong way you will need to look for a dead fuse.
@@alecovchinnikov8724 battery is 100% right way because I have not actually taken the battery out , and all other things work fine like radio lights , horn etc but won't start says depress the clutch , tried my best could not start it. Any idea if clutch has any fuse? I can't find any in hand book
@@adzaaf1786 So can you tell what did you do exactly?
Did you get this fixed
This method didn't work. I ended up replacing the module at a local mechanics. Replaced with a second hand one to save some $. Total: $980 including labour.
El mío es Passat 2007 y anda esa p en el tablero ya le puse frenos nuevos
hola, en mi caso es solo el botón del interruptor, comprarlo en Aliexspress, ahi detalla el modelo y año de tu VW....suerte.