Hey guys what springs did u use for the front and rear ?? I know they are ome. But which ones I want my 4runner to sit just like this so I'm very curious ?????????
Yeah I see this comment on every other video.... nice congratulations on your 4Runner.... you like wanna settle this in cash, it looks like you are advertising your rig How much you want for it, I pay cash my friend currency paper , no wired transfer, check, COD, CD
good afternoon friend, i'm from brazil and i really liked your work, really good .... there was only one doubt in the video, you changed the original springs, or used the old ones in the car. i have a 1997 hilux surf can i do this too? sorry my english i'm using google translator
Looks great! You should take off the running boards one day and see if you like it. It may just be my personal opinion, but I find these trucks look slightly taller when they’re taken off. Love the tire rim setup too. Very clean.
is it just biletin 5100 and OME in back? no spacers? can you be more specific which type of bilstein 5100 and OME springs to get for this kind of raise in the back?
Does anyone know if the rear shocks from a 5th gen 4runner fit 3rd gen 4runner ? I have rough country shocks and ome 890 in the rear and I feel like they are too stiff would changing this to 5th gen shocks help?
Great job guys 😁👍🏼 One question You didn’t have tu use spacers with this set of wheels with 0 offset right? I want to know because I want to install the same set on my 4Runner 98 with 3” kit lifted 👍🏼
I lived on Kauai for 6 years working at the hospital. I can’t stand this racism and you get what you give. Act like a stupid Halle, get treated like one. Learn to respect. We are all brothers and sisters and yes, those island locals can wheel the fuck out of their rigs!!! Miss all my Island family.
I just got a 3 inch lift on my 3rd gen, I also had gotten an alignment and wheel balance but I have a vibration in the steering at 60-70mph. Does anyone have any knowledge of what it can be?
@@vb1gbg I just got some off brand a/t 265/70/16. I just recently drove my boys with 285/75/17 and there’s still a slight vibration but isn’t as bad. I’ve already check tire rods, bushings, axles. I know I have to replace my axles but other then that I’m no too sure.
@@johnnycromwel5263 Do you have wheel spacers, and if so, are they hub-centric? Or do you have lug nuts that are shaped specifically for your rims? Or do you have a lift which maybe led to a bad cv axle? If it isn't the tires/balancing (which is most likely the case) or any of the above, then I don't have any idea.
@@vb1gbg yes I do have spacers and I’ve had them before the lift, I looked under and seen that both of my axle are leaking grease so most likely (for sure) theres a rip in the cv boot. I just purchased new axles and going to see if that the problem.
I just put a new 3" kit on my 2001 4Runner. Installed a front diff drop kit along with blasting shocks and toy tech springs. Had the front alinement done also. Now I have a bad vibe ration in the front at 50 mph and above. What could it.
Possibly the diff drop, undo the diff drop and see if vibe goes away. Diff drop sounds like a good idea until you realize it changes the angle to the driveshaft which in general is a no-no. Try it, can't hurt. Also heard in rare cases it's linked to front diff failures
Michael_lvft Roach Please contact us by phone or e-mail for quotes. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at sales@88rotors.com. Thank you for your interest in our products/services!
Daniel Salas Please contact us by phone or e-mail for quotes. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at sales@88rotors.com. Thank you for your interest in our products/services!
Which Toyota 4Runner 4x4 should I buy? Hi I am new to the off road world, I want to buy a used Toyota 4Runner 4x4 and I only have $ 5000, which one you recommend?
2nd gen runner. most lift avail. I have a 2nd gen on a 3" body 5 suspension lift. diff drop. 35s. 4.88 gears. rig was 1k lift and tires and alignment was 2500. I went with rough country. life it. it's ifs front coil rear. I daily drive every other day trail here in alaska for 3 years straight with tires at 10 psi hassle free.
i also lifted a 99 3rd gen using toytec 3" body 3" suspension lift on 35s. it was coil over front bit stiffer ride than my 2nd gen torsion bar front. and less lift as well. imma stuff 38s under my 2nd gen. no way that gonna happen on the 3rd gen
The rear is loaded with 4 factory wheels and tires and stock suspension components which are NOT constant loads. The springs are not a heavy load so they do sag with that much weight in there but designed to be level and a more comfortable ride without having such a load.
I have a 3rd gen and they are so under hp for a model world that I would NEVER invest that type of money in a 20 year old vehicle. What so u can spend tons of money to get under 20 mpg, get passed by everyone on major hill climbs or ride like a old ass vehicle
Hahah I can assure you that this vehicle with a lift and some nice tires is just as capable as another suv out there when it comes to anything expect hauling stuff. Sure it may not be fast but not everyone’s in a race to get somewhere. Cruising and off-roading babbbbbyy. You could buy one of these cheap, throw lift/tires/ re gear / custom paint/ break mod/ and it would still be cheaper than a brand new stock suv or truck. Significantly cheaper..... also there’s a reason you see these 20 year old vehicles on the road often and that’s because they are BUILT TO LAST.
SUBSCRIBE FOR MORE VIDEOS DAILY!
Hey guys what springs did u use for the front and rear ?? I know they are ome. But which ones I want my 4runner to sit just like this so I'm very curious ?????????
Love some 3rd gen action....my 98 has 331k and still rolls like a champ💪
I’m about to buy a 1998 4Runner 4x4 automatic with 255k miles for $3,000, is that a good buy??? Please let me know thanks
@@skylinemusik1 as long as it's mechanically sound, I personally would feel good about it! In the Pacific Northwest that would go for $5,000
D Barton
Bro I ended up getting it for $2750 💪 cleans title and runs smooth, 4x4 working perfect
@@skylinemusik1 congrats!! I personally do an oil change every 3500 miles. don't beat the crap out of it, and it'll last you long, long time.
Yeah I see this comment on every other video.... nice congratulations on your 4Runner.... you like wanna settle this in cash, it looks like you are advertising your rig
How much you want for it, I pay cash my friend currency paper , no wired transfer, check, COD, CD
That lavender steel color is nice looking, 3rd gen 4runner looks so cool. 96-98 are my favorite years, it is such a beauty. 😎
I just got so dizzy watching this. Felt like I was on a rollercoaster. Badass Toys too.
good afternoon friend, i'm from brazil and i really liked your work, really good .... there was only one doubt in the video, you changed the original springs, or used the old ones in the car. i have a 1997 hilux surf can i do this too?
sorry my english i'm using google translator
New springs
Which OME springs F/R did you go with? Looks great, i have the same thing in mind 881 / 890's...Thanks!
Bilstein shocks are what Toyota TRD shocks are...just less expensive.
Not even close LOL if you get a full Bilstein 5100 set up with old men emu coils it is not even comparable
Does anything rub while turning with that exact setup?
Which ome springs did you use for the front and for the back 88 rotors?????
Is that a 3 inch lift? Any rubbing? Any necessary trimming?
Looks great! You should take off the running boards one day and see if you like it. It may just be my personal opinion, but I find these trucks look slightly taller when they’re taken off. Love the tire rim setup too. Very clean.
I took mine off myself and it does make it look taller and way better in my own opinion.
But I like the look 👀
No running boards and mud flaps makes a big difference 👌
is it just biletin 5100 and OME in back? no spacers? can you be more specific which type of bilstein 5100 and OME springs to get for this kind of raise in the back?
my car looks EXACTLY like this Lmao
Mine too. Down to the clear coat failure and complete lack of rust.
Does anyone know if the rear shocks from a 5th gen 4runner fit 3rd gen 4runner ? I have rough country shocks and ome 890 in the rear and I feel like they are too stiff would changing this to 5th gen shocks help?
Great video can you tell me what springs you guys used your 4 runner sits perfect I know they were ome but Which ones thank you
Great job guys 😁👍🏼
One question
You didn’t have tu use spacers with this set of wheels with 0 offset right?
I want to know because I want to install the same set on my 4Runner 98 with 3” kit lifted 👍🏼
What wheels and tires did you use? I want to use the exact same for my 2002!
Hello guys I have 3th gen 4runner I got 15 inch rims and 33 tires can you help me , how many inch spacers I need to install those tires
Did you guys do a body mount chop to make the wheels fit?@88rotors
What size lift?
is this a 2 in lift?
That looks nice bro! Keep the boards on, it’s functional and goes with the trim.
Does it rub?
What's the song?
Gorgeous!!!
which knotch did you set the front shocks to?
did any body else see those cables running all over the cat at 1:11
To prevent it from being stolen
How much ?
Is there any rubbing?
MMayer lots
Come to Hawaii we got some the sickest 3rd genz....
Racist place I have ever been.
@@ThePerpetualStudent your moms racist.🤣😂🤣😂
I lived on Kauai for 6 years working at the hospital. I can’t stand this racism and you get what you give. Act like a stupid Halle, get treated like one. Learn to respect. We are all brothers and sisters and yes, those island locals can wheel the fuck out of their rigs!!! Miss all my Island family.
Haole
I just got a 3 inch lift on my 3rd gen, I also had gotten an alignment and wheel balance but I have a vibration in the steering at 60-70mph. Does anyone have any knowledge of what it can be?
Which brand are your tires? I was reading the Cooper Discover tire reviews, and some were saying the same thing.
@@vb1gbg I just got some off brand a/t 265/70/16. I just recently drove my boys with 285/75/17 and there’s still a slight vibration but isn’t as bad. I’ve already check tire rods, bushings, axles. I know I have to replace my axles but other then that I’m no too sure.
@@johnnycromwel5263 Do you have wheel spacers, and if so, are they hub-centric? Or do you have lug nuts that are shaped specifically for your rims? Or do you have a lift which maybe led to a bad cv axle? If it isn't the tires/balancing (which is most likely the case) or any of the above, then I don't have any idea.
@@vb1gbg yes I do have spacers and I’ve had them before the lift, I looked under and seen that both of my axle are leaking grease so most likely (for sure) theres a rip in the cv boot. I just purchased new axles and going to see if that the problem.
@@vb1gbg I will update you when I replace the axles
Was the 4Runner stock height or lifted a little for the 33’s?
That’s stock, no loft
Uhhh, okay. Do they perform well on it off road?
I just put a new 3" kit on my 2001 4Runner. Installed a front diff drop kit along with blasting shocks and toy tech springs. Had the front alinement done also.
Now I have a bad vibe ration in the front at 50 mph and above.
What could it.
Don’t lift it . That’s why
Start with wheel balance. Check your drive lines and u joints after that I would say.
Possibly the diff drop, undo the diff drop and see if vibe goes away. Diff drop sounds like a good idea until you realize it changes the angle to the driveshaft which in general is a no-no. Try it, can't hurt. Also heard in rare cases it's linked to front diff failures
There’s nothing you can do about it when the CV’s angle has changed. Also the diff.drop kit is a waste of money in my experience.
What's the name of the soundtrack??
What springs and what notch setting on the 5100’s ?
Thanks for responding
What size are does rims?
What’s the offset?
Does it require upper control arms ?
Jose L Vazquez . No . Unless you install extended travel coil overs . In this case specific 3rd gen 4Runner shocks don’t require UCA ...
What is the color of that 4Runner?
It is lavender steel Toyota color code 926
Send me the link to those wheels I have a 96 4runner needs wheels ASAP
Michael_lvft Roach Please contact us by phone or e-mail for quotes. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at sales@88rotors.com. Thank you for your interest in our products/services!
88ROTORS how much does it cost to do all this i have a 97 4 runner 2wd
Daniel Salas Please contact us by phone or e-mail for quotes. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at sales@88rotors.com. Thank you for your interest in our products/services!
What OME springs ?
Luis Garcia old man emu
You know that rubs.
Josh Reed LoL
For sure, it will If taking offroad. Crawling at the mall parking lot is not an issue.😂
I much for parts of everything thanks
Which Toyota 4Runner 4x4 should I buy?
Hi I am new to the off road world, I want to buy a used Toyota 4Runner 4x4 and I only have $ 5000, which one you recommend?
Edgar J. Rodriguez 3rd gen if you can. It is probably the best for your price range.
2nd gen runner. most lift avail. I have a 2nd gen on a 3" body 5 suspension lift. diff drop. 35s. 4.88 gears. rig was 1k lift and tires and alignment was 2500. I went with rough country. life it. it's ifs front coil rear. I daily drive every other day trail here in alaska for 3 years straight with tires at 10 psi hassle free.
i also lifted a 99 3rd gen using toytec 3" body 3" suspension lift on 35s. it was coil over front bit stiffer ride than my 2nd gen torsion bar front. and less lift as well. imma stuff 38s under my 2nd gen. no way that gonna happen on the 3rd gen
Hermosa máquina
Wheel bearing problems ahead
why?
Do my 4runner like this!
Precious
Lose the running boards
And should of kept original wheels
That thing is screaming for a lift....that rear is sagging already.
The rear is loaded with 4 factory wheels and tires and stock suspension components which are NOT constant loads. The springs are not a heavy load so they do sag with that much weight in there but designed to be level and a more comfortable ride without having such a load.
@@88ROTORS Ok...I didn't know that info...thanks for the clarification.
Stone Temple Pilot or Alice in Chains in Chains songs please
the music's is got to go home boy👎👎👎
I have a 3rd gen and they are so under hp for a model world that I would NEVER invest that type of money in a 20 year old vehicle. What so u can spend tons of money to get under 20 mpg, get passed by everyone on major hill climbs or ride like a old ass vehicle
Good thing it’s not yours then.
Hahah I can assure you that this vehicle with a lift and some nice tires is just as capable as another suv out there when it comes to anything expect hauling stuff. Sure it may not be fast but not everyone’s in a race to get somewhere. Cruising and off-roading babbbbbyy. You could buy one of these cheap, throw lift/tires/ re gear / custom paint/ break mod/ and it would still be cheaper than a brand new stock suv or truck. Significantly cheaper..... also there’s a reason you see these 20 year old vehicles on the road often and that’s because they are BUILT TO LAST.
What’s the song ???