Installing wheel spacers on my Kubota BX (How-To/DIY) -Before + After
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- #KubotaBX #Wheel Installing 2" Wheel spacers on my Kubota BX. Showing how to install wheel spacers and what to look out for. Showing video of before and after the wheel spacer install. #Spacer #Install
#BiffsEquipment
LINK TO WHEEL SPACERS: www.ebay.com/i...
The quality of this channel is on point!!
Thanks Dominus! Sorry I just saw your comment now, been plowing snow for the last 3 days, I’m glad you guys are liking the bee content, stay safe out there!
The snow has started melting away. I hope you have a great weekend.
Thanks Jeff, Hope you enjoy your weekend as well buddy!
I put 2 inch in back and 1.5 on the front of my tractor and I love em
That’s awesome Dan! I bet it looks mean being you widened both front and rear, I thought about doing the same.. and now you got me thinking again 🤔 lol. Glad you to hear you like them so far, have a great weekend!
One of the better DIY on this task. Especially since I bought wheel spacers and plan to do this too.
Thanks man, that’s what I was aiming for! There wasn’t really any good videos showing the before and after and explaining in enough detail about the spacers and how they work/install. I hope my video was able to help lots of people
Hey buddy, great video. Very interesting learning the bx's front is wider than the rear. I did the 3" on my L2501, and man, it makes ALL the difference in feel when I'm raising up my 1,150lb snow pusher 7ft in the air! I wanted the width, but NEEDED the space for tire chains. We've been in the -45 wind chill, but by Tuesday we're mid 40s! That's a nice swing. My buddy working on line 3 pipeline in Minnesota had a 12hr night shift at -44F regular temp, and -58F wind chill! I don't miss those days what so ever. I'll be looking forward to your front end rebuild. You definitely work that BX! take care bro
Wow that's a great point that you may need spacers for certain wheel chains.. I bet it makes installing the chains easier as well having a bit more room behind the wheel to get them adjusted.. Sounds like your getting very similar weather to us! Its been very cold here and been below freezing for a month but now the weather is finally turning and things are warming up, calling for 40s tom so that's gonna be refreshing cuz I'm tired of plowing this year and I'm ready to get back out in the lawn/dirt! Thanks for watching buddy it was great hearing your experience with your spacers on your L-series.
Yeah the inner fender rubs against any chain from I think the b series and the L series. And probably the LX series. I know GP Outdoors did it on his B for that reason, and I believe that's why his new LX came with spacers already on. That inner metal fender rides too close to the tire sidewall.
I like the quick attack with the weight bracket
Thanks Doug! The rear quick hitch is a godsend for sure, makes removing my weight bracket and installing rear implements a snap. If you don’t own one I highly suggest it, I got mine off eBay and it was only about $170 I think.. bought it 2.5 years ago and still going strong 👍🏻
Your videos getting amazing like watching a movie 😊, awesome job on the wheel spacers
Thanks buddy I really appreciate that.. trying to dial a few things in so hopefully they keep getting better for you guys. Stay safe out there!
A trick that might work is get a furniture dolly. Jack the tire up just enough for it to clear and lower it to just touching. Should do the trick. I want to put spacers on my BX2680 too.
I did spacers on my BX and Carlisle all terrain tires, boy what a difference it made!
💥 You will definitely noticed the difference on slopes. It would be nice if tractors came with adjustable rims. Ever see those spiral adjustment set up from either Case or Ford back in the day?
*Keep on tractoring!* 😁👍
Haha it sure would wouldn’t it?! I think I know what your talking about with the adjustable rims.. that would be a great feature to have or even a great option to be able to buy that feature with the BX cuz it sure needs it, what a difference already I have noticed and lots more traction to boot with the wider footprint. Thanks for watching Jon.
I'm surprised with all of your modifications, you didn't already have spacers ! Great addition. I could only run 1.5" on my BX because I have the 54" mower
Haha I know right? I been wanting to buy a set for 2 years now but never got around to it.. glad I finally did tho! Thanks for watching Frank, good to hear you got some as well!
Frank Federico: What style of tires do you have, turf or bars? I have a BX 1880 with turf and a 54” mower. When I measure the space between the tire and mower wheel it is close to a 2” measurement.
@@danielwebb2869 I have Turf Tires. With the spacers I only have about 1/2" between the tire and the mower wheels. The BX 1880 has smaller tires than the 2660. Bro-Tek shows all the sizes for your BX bro-tek.com/products/index.php?s=&searchc=1&addon%5B%5D=Kubota&addon2%5B%5D=BX1880&srt=
@@JeepinMaxx very much appreciated! I had a BX25....never needed to worry on my slopes, would rotate the hoe if it was a bit dicey. With the 1880 with filled tires, it’s time to widen its stance and add a weight package. Regards Dan
Great decision. You will notice a difference, I did the same on mine 2” . I also added blue loctite to the bolts on the hub. 👍🏻
The blue loctite isn’t a bad idea just cuz you never know, would hate to have nuts come loose in the middle of a Job that’s for sure, glad to hear you like them I know I’m gonna love mine as well.. already do!
You made a good choice going with the 2" instead of the 1.5". I put 2" spacers on my tractor about 6 months ago and they work great. Your tractor is looking great! I don't think you have a skid plate yet though. You should consider getting one.
Thanks buddy! So far I’m super happy with the spacers, it looks better, rides better, it’s more stable and has more traction with the wider foot print. Your right about the skid pan I really do need one specially with all the land clearing I do, hopefully I’ll pick one up this spring and show it on the channel. Thanks for watching man
I had contemplated going with wheel spacers on my Bx, and this video convinced me to do it.. I bought the same spacers... Thanks.
Great Idea Kubota with the 2 bolts so it's easy to put the wheel on!!!!! I put winter tires and new wheels on my truck this winter and when I put my summer tires back on that are 6 bolt wheels it took me 10 minutes of struggling to align the first tire. Had to had my 115 lb. wife help me align the other 3. Whew! Hello Discount Tire for putting on the winter tires and wheel next winter!!
Hey Tom thanks for your comment! Yah they can really be a son of a gun sometimes to get back on specially when they are filled with liquid! I’m glad you found it useful, maybe next time you do a rotate you can try using the Jack to raise and lower the vehicle instead of lifting the wheel to the vehicle, it def saves your back haha. Thanks for watching!
Thank you for another excellent video ! Can’t wait to see how you like the feeling of the spacers. The kubota looks great 👍. Can’t wait to see the front end maintenance video’s . Keep up the great work and God bless you Brother.
Thanks buddy! I'm sorry I'm just now seeing your comment sometimes TH-cam hides them from me haha. The tractor def looks a lot more sharp now, the traction is a lot better and its way more stable so I would highly recommend people try them if they haven't already! I hope to get going on the front end parts replacement here in the coming month, thanks for watching!
Hi Biff, great job again buddy. Definitely waiting on a follow up to see your opinion on weather them spacers made a difference on the overall stability. I’ve been thinking about putting them on my Mahindra. Thanks.
Thanks Rick! I think it’s gonna make a tremendous difference in both stability and some in traction as well being a wider footprint, I’ll def keep ya’ll posted with how they work out and we will put it to the test this summer!
Wohoooo boi!!! That is pretty slick!! I just got my BX 2680 5 days ago and it's awesome. Man you gotta get the snow blower, it's a beast and I clean 3 acre yard with it. I got the power broom and waiting on the blade, will let you know how they perform cleaning a broiler chicken barn after Monday :) love your channel big guy!
Thanks Nick! Glad to hear your enjoying your nee BX! I’m jealous! I bet that 26hp really throws some serious snow with that snow blower you got, you should be good to tackle anything winter throws at you between the blade, broom, abs snow blower! Hope you have a great weekend buddy and thanks for your support!
@@BiffsEquipment right back atcha big guy! The throw on the snow blower is unreal! And having the electric control for the up and down on the chute is mint, I control it with my thumb while moving the hydronic at the same time. And she just chugs through 4-5 foot drifts easy peasy.
I'm excited to see how you like those wheel spacers, I might give em a go after your results. Also the drone footage is very fun!
Have a wonderful weekend chief :)
@@Vaessen13 excellent! I knew you’d love it, these tractors are absolute beasts. Thanks buddy take care!
I’ve been thinking about putting wheel spacers on my BX. I did have them put on my B2650 and they do make a world of difference. Thank you for sharing.
Thanks Jean you should, I know you would love them cuz so far they have been working great, I wouldn't go with out them now. Thanks for watching buddy.
@@BiffsEquipment Can wheel spacers be added to the BX that also has a mid deck mower?
@@jh9855 yah for a 55” deck you wanna stick with 1.5” spacers and with a 60” deck you can use either 1.5 or 2” spacers
An inexpensive mod, that adds a lot of safety to the BX. I wish I knew the Jeep spacers worked on the BX years ago. Very nice video Biff - cheers
Thanks Bob, how have you been liking your spacers so far? So far iv noticed a ton more stability and a lot more traction as well with the wider stance.. I was actually quite surprised with the traction I gained.
@@BiffsEquipment - They are great - I avoided adding them because the Bro-Teh spacers are so expensive (great marketing). When I found out that $30 ~ $50 Jeep spacers will work, I jumped. I was going to buy the expensive spacers, but found a post on Orange Tractor Forums that linked to the Jeep spacers. So far, no regrets going with the 1 inch spacer. I will keep an eye on your channel to see how these help with the demands you put on your tractor. These small tractors are real work horses.
@@botabob I totally agree Bob, the bro-tek are just way too much money for a wheel spacer.. there is no way they are made any stronger than a typical wheel spacer either .. and if they are made stronger it prolly isn’t needed.. they sell the same type of spacers for pickup trucks that weigh 7,000-8,000lbs and tow 10,000lbs so you can’t tell me you need some ultra durable $200 spacer for a 1,400lb tractor lol.. I guess time will tell tho but that was my logic, I always been wanting the keep ones but never jumped on them cuz there were so many guys using differnt part numbers and sizes I just hadn’t ever made up my mind on which ones I wanted.. finally I said the heck with it and just ordered a set from eBay that I had been watching for quite awhile. Your video was great too Bob and I’ll be keep kg an eye on yours as well 👍🏻
Nice mod and clear video. I have an older 1991 B7100 HST. Back when the width of the rears were still adjustable. I use the star pattern too, but I use the reverse star procedure.
Very cool man! Yah sometimes I wish they still
Offered the adjustable rear ends that was a nice feature for sure. So far the spacers have not only added lots of stability but they have also increased the traction quite a bit by widening out the wheel base and spreading the load over a wider area.. I’ve been very pleased with the 2” spacers I added. Thanks for watching!
Just ordered 2 inch for my BX . Great video and info .
Thanks Skip! That’s great your gonna love them! It’s amazing how much more stable it makes these machines, your not gonna regret it, not only does it look better and more “proper” but it gives you better traction and way more stability. Let me know how you like them!
PS. Brand new video is dropping in about 45min. 👍🏻
When I put mine on I used drop of blue loctite just for extra assurance. Nice vid!
Thanks Chris, using a bit of loctite isn’t a bad idea , it certainly won’t hurt anything that’s for sure! Thanks for watching
@@BiffsEquipment Thanks for the quality videos. You're killing my wallet. LOL
@@SchulzChris haha, Just don’t tell the wife!
thanks much. just ordered the spacers. felt a bit tippy today. your videos are excellent…
Awesome! You won’t be disappointed, adding wheel spacers to my BX was was the single best/cheapest upgrade I have ever done toy machine and it not only has made it much more stable but also has helped with forward traction and pushing power cuz of the wider wheel base. Thanks for watching!
@@BiffsEquipment Right on all points! The BX is so much more stable on my rear hill. Always aware of how to do things better and safer on my tractor and appreciate you taking the time to make such high quality videos...
I commend you on you rexcellent presentation in all of your videos. I have viewed many of them.
Thanks Paul I really appreciate that! Hope you enjoy your weekend and thanks for the support 👍🏻
Looks great! Kubota should build the BX with a wider rear tire width in the future, IMO.
I agree’, even if they just went an inch or so wider that would be plenty but they try to keep them as compact as possible to be competitive in the market so I guess I kinda understand but I feel like stability and safety should be first. Thanks for watching
I really need to get spacers for mine. Maybe I’ll get around to that this summer. Looks good too! Which I like the wide stance on a tractor.
You would love it if you did! Not only makes it look better but makes a huge difference with stability i noticed as well as better traction as well cuz of the wider stance. I left the link in the video description if you wanna save the link for when your ready.. Its an eBay link. Thanks for watching!
@@BiffsEquipment thank you!
Spacers are a must have along with liquid in tires! I nearly rolled my 2680! This made a huge difference with my BX.
The only thing is I wish I had seen this before! I paid over $200 for my spacers, from a well know aftermarket company! I should have shopped around!!
Thanks so much for sharing!!
Your absolutly right, rear ballast specially filled tires and spacers makes a HUGE difference in how these little tractors work.. having more weight and a wider stance not only keeps it more planted but also helps you to get all that power to the ground. I’m glad you got yours done before something bad happened! Sounds like you got the Bro-Tek spacers, they are very expensive, I didn’t wanna pay that much money but I’m sure they have a great warentee where mine don’t but I wasn’t too concerned.. guess we will find out in the spring how strong these are for the money lol. Thanks for watching
Thanks for watching guys, The link to the wheel spacers I bought is www.ebay.com/itm/2-Inch-5x4-5-Hubcentric-Wheel-Spacers-1-2-Studs-For-Jeep-XJ-KJ-KK-ZJ-MJ-TJ/143083624808?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648
These were a good price and I'm sure if you look around enough you may be able to find them even cheaper.
Hello, I have two questions regarding this wheel spacer. First, how did you determine your choice was a proper fit (make and model of vehicle to fit on your Kubota)? Second, since I have a 54" mid-deck mower on my BX2380, how do I determine the correct part/model number for a 1 1/2" wheel spacer?
Separate question: Your thoughts on installing a trickle charger pig-tail and leaving the Kubota hooked up to a trickle charger when not in use?
Great job on the video!!! I'm an owner of an 1880 new in 2019. It has a loader, a box blade and a belly mower. I also had the 3rd function valve installed in case I ever needed it. My only regret is the belly mower which sometimes is a pain getting on but I've got some ideas to help. I'm a first time tractor owner and am very safety conscious. I live in an area where I'm the youngest at 67 years of age and am the 1st guy to have a loader and a box blade. I've done plenty of work for my elders ha. My problem is that the boss wants me to get rid of it and get a riding mower since we are done with all our needs for the loader and box blade. I am worried that my 80 and over crowd are used to the use of a tractor and one of them will buy a tractor with a loader and I know he will roll it on his hills. I've done a few jobs with dirt for him and he wanted me to take a certain path close to a hill and bumps and I had to tell him that I'll go this way to be safe. I hope to get the mower easier to install so she doesn't see me struggling and I can keep my old fellas from buying their own. I have no problem doing whatever they need, it's fun! I just don't want them killing themselves! Hopefully this summer goes well and if I can keep it I'll definitely do those spacers!! Been watching ya'll since 2018! Thanks!!!
Hey Tom thanks for your comment! You are a very nice Neighbor to be helping out your elderly community with your tractor. I agree it is a lot of fun and is very satisfying to be able to help others who don’t have a tractor. It sounds like you really enjoy what you do and using your Kubota BX so I would def advise your wife to keep the tractor specially if you guys can afford to. The mower deck can be a struggle for a little while until you figure out it’s quarks of getting it all hooked up.. it use to take me 20-30 min to install my deck now I can remove and install it in under 5 minutes no lie:: the hardest part for me is getting the deck under the tractor but that’s because I don’t turn the guide wheels and I just rip it under the tractor by force as I’m usually in a hurry haha. Is your deck the drive over model or the regular model? Next time you install your mower deck try leaving the loader on and use the loader to pick up the front end of the tractor like a Jack.. then you can roll the deck under much easier. Once the deck is under the tractor installation is very simple.. maybe I’ll make a video on how I install mine so that you guys can see the easiest way.. but if you have a drive over deck then yours will be a little different to install and i’v never owned the drive over deck model. The PTO I always leave to install last.. I always install the rear of the deck first and slot it into the 2 pins.. after that I’ll connect the front of the deck using the bracket.. then lastly I’ll install the drive shaft and then finally lift the deck up off the ground. Which part of the install do you find most hard to do? Let me know and maybe I can help you do it easier.
Also if you are not using the loader and boxblade as much anymore then why not just leave the mower deck connected? You should be perfectly fine with leaving the deck on you only suffer a bit with ground clearance but for most simple tasks, moving or spreading dirt around or even using your rear box blade the mower deck will be just fine hanging under the tractor while you do it.. the only thing you gotta watch out for is to not catch the deck on a stump, log, or Rock.. as long as your careful you can leave the deck on year round.. I only take mine off because of the various types of jobs I do with my tractor.. and also my tractor won’t fit on my trailer with the deck on so that’s another reason I take mine off when I finish mowing but I don’t think you have to. Hopefully your wife lets you keep the tractor.. at this point you won’t loose much value by hanging onto it. They retain their value very well and even tho you may think you won’t need the loader or grader box anymore I assure you that at some point some Job will come up and you’ll kick yourself in the butt for getting rid of it. That’s just my 2 cents tho.
@@BiffsEquipment Thanks, I agree that I'll miss it so I'll keep working at it. I saw a guy who had his rear tires go on a ramp to get it higher is that I will try first. The PTO connection is the only problem I have with installing so I think that will help. TY For the input!!!
So Biff, what did you get for a drone? Adding that to your videos is a nice addition. I just picked up the mavic mini 2, and it's great.
We're getting some good snowfall right now, so you can try out the spacers in the snow in the morning. Good luck.
Hey Ron, sorry I never saw your comment buddy, I have a Mavic pro, its been a great drone thus far, The Mavic mini 2 is also an excellent drone and was one I was highly considering because of its compact size but was worried about wind. Both do the same job though and yours actually takes better video than mine I think 4k/60fps where I'm locked at 30fps in 4k. As for the snow we did get it and i was able to test out the new spacers in my next video.. Hint: The spacers worked great and helped a ton with traction which I really wasn't expecting.. Thanks for watching!
put 2 inch spacers on my green tractor last year
noticed a huge difference in the way it rode
you might want to go and put some lock tight on the spacer nuts
Thanks Leo, I really love the spacers so far, better traction and lots more stability.. It also looks better as well. As for the loctite thats not a bad idea but honestly as long as your torqueing them to spec you shouldn't have any issue with them coming loose but its not a bad idea. Thanks for watching!
Excellent content! Im picking up a brand new Kubota BX2380 today with multiple attachments. Will be using it mainly for work and odd side jobs around Southern California.
Awesome man! I assume you got your brand nee BX now then? Sorry I didn’t see your comment sooner. How have you been liking it? Iv got lots of great money saving tips and tricks for the BX on my channel so hopefully you will find it useful for a new BX owner. Keep me posted on how things go and congrats!
Your videos are very informative
Thanks buddy! Hope you have a happy Easter! Sorry I’m just seeing your comment!
Just ordered a set of 1.5" I did some measurements and I think 1.5 will align the outside of the tire for front axle with outside of tire on rear. Next I am going to fill my tires. I have a few dirt projects lined up for next spring and want to increase the hydraulic pressure and then add some weight and stance.
Nice Jason! Yah the 1.5 rear spaces should put it about exactly even with the fronts, the 2” ones I have put the rears slightly out passed the fronts. Iv had zero issues with my spacers and no issues to see as of yet with running higher hydraulic pressures and I beat the crap out of my bx. Keep me posted with how you make out man!
@@BiffsEquipment I set up a Facebook under Huser Helpers. Look me up sometime to direct message. I am editing the first of three video series with this project but I have a really cool video in March/April time-frame. I also want to talk to you about stump buckets.
Just found your channel, I think I'll be hanging around a bit more :) Great info for the cheap spacers, I had my eyes on the Bro-Teks but SO pricey.
Thanks Nathan I appreciate you sticking around! Yah I totally agree the Bro-Tek are so darn expensive for what it is.. I honestly doubt they are a whole lot stronger if any as they are all made out of billet aluminum regardless. Let me know which ones you end up going with and how you like them, so far I love mine and the stability they add is insane.
You picked the right size by the looks of it. Should make a noticeable difference in stability. Good job getting Jeep spacers. When you find the right size, you save a bit. Two suggestions: consider using red Locktite, and putting a thin, even coat of anti-seize on the hubs (you’ll thank me when you have to take the wheels off). Thanks for this no B.S. how to video.
Nice and informative video!! I put the 2" spacers (Jeep aftermarket) on my BX23S last year because I have some side hills on my property. More than once it felt a bit top heavy before, and now it feels much more planted. As for the suggestion of Loctite, it is not needed as the nuts/bolts have a taper. Nobody every put Loctite on car or trailer wheels, right? LOL!! Spacers are not needed for the front wheels unless you want a look.
That’s great to hear Bent glad your enjoying the 2” spacers as much as I have been, your right about three stability it adds and it was wise of you to add them if you have a ton of heavy slopes.
Your also correct about the loctite, I said this in another comment as well that it’s just not needed.. proper torque on the studs/nuts and it should never come loose.. nobody uses loctite on automotive wheels either and never have an issue.. I can understand that if your never planning to take the spacers off and really wanna be sure they will never come loose then it’s not a bad thing to loctite but it’s certainly not needed. Thanks for watching!
Great video, the wheel spacers are a must. I’m also thinking it would give more clearance if you run a set of tire chains
Thanks Scott! Yah I agree, it will def clear up some room between the tire and the tractor frame if you ever wanted to run tire chains. I had intentions on buying tire chains this year but since we didn’t really have a hard winter they really weren’t needed. Some winters my driveway turns into a skating rink and when it does I’ll make sure I have chains next time. Check out my newer plow videos from this winter you’ll see what I’m talking about. Thanks for watching!
Morning Biff! Another thorough and detailed how-to to help folks. Great job on the video. We mentioned you on Dan's (Back40 Firewood) livestream last First night. LOL. Hey one question - do you use a torque wrench on the nuts after? Thanks!
Hey GP thanks for your comment! That’s great to hear I’ll have to check it out I appreciate you letting me know as it’s hard to catch everything that happens on TH-cam that’s for sure!
As for the toque I would highly recommend torquing all of the studs to around 90ft-lbs when your all done as that’s the factory spec for the Kubota BX but you should go by whatever your manufacturer says in the manual for your given tractor.. long as they are torqued to spec you should never have an issue.. I just cranked mine down with an impact gun tho as I was an automotive mechanic for many years and know the feel but it’s always best to torque. Thanks for your comment GP, I appreciate you watching!
Still running the spacer? Just bought my Bx23s. I'm in Virginia where we have alot of Hills.. Love the videos!
I used anti-seize grease. Always remove before taking to dealer for service while under warranty.
Forgot to say I love your vids.
Hey great point man thanks for the comment! I agree 100% always try and remove them before going back to the dealer to avoid a void warantee.
Thanks buddy!
I'd like to put spacers on mine AND go up 1 size on tires, taller and wider.
I put 1.5s on the rear of a BX2200 and one turf tire rubbed the 60" MMM wheel bracket. Btotek replaced it with a 1.25". I just traded the 2200 for a new 2380 and am waiting for the MMM. I am wondering if I will have the same problem because I would like to buy the 2". Keep the great videos coming. Thanks.
Hey John thanks for your comment, I'm sorry I'm just now seeing this. Your bx2200 rubbed because the mower deck is a little different on those only bx1800 and bx2200 tractors.. Anything bx50 series and up should allow you to run 1.5" rear spacers for a 50" deck and 2" spacers for a 60" deck... You should have absolutely no problems at all running 2" spacers on your new bx2380. Hope this helps, let me know how you make out!
Great job. I was told by my dealer that I could go as wide as 1 1/2 only on my 2020 BX 1880 but that works for me. I wish I had some numbers to order those on ebay as most of the name brand spacers are almost twice the price. I was wondering if you have heat in that shop of yours
Thanks man, yah they prolly told you 1.5” because I’m assuming you have a 55” deck and not a 60” deck, the 55” deck can only do 1.5” spacers but the 60” deck can do 2” spacers with out the wire interfering with the deck. I’m super happy with mine so far specially for the money, time will tell how durable they are. As for my shed I have a Gas REZNOR hanging heating unit that I installed myself in the fall.. it works fantastic and can heat the 20x20 shed up in about 7 minutes I can take my coat off.
@@BiffsEquipment Thanks for the return comment and I never bought mine with a deck because I have an almost new 54 inch zero turn mower that's faster at mowing than any tractor so I think my dealer figured 1 1/2 inch was plenty big enough for the small 1880. I will do some more checking around. I have ordered a set of hand built rear stabilizers from Mark Hodge and want the skid plates before I do any off road work. I have a propane heater just to warm my two car garage but have a friend that's gonna give me a huge pellet stove so hopefully I can get it hooked up before next winter. Thanks
@@kagnewmp12 ah I see yah that could be as the 18 hp bx has smaller rear tires so I’m sure 1.5” is plenty. Zero turns are nice, I owned a commercial scag when I first started my TH-cam channel but eventually traded it for a skidsteer that I fixed up and then traded the skidsteer for my Cummins pickup truck lol.. I do a lot of wheeling and dealing that’s how I get half the things I own cuz I don’t have a lot of money lol.
The pellet stove should work great, the hardest thing will be making the exhaust to go through the wall or the roof and to make sure it’s legal that was the hardest thing for me to do
Another great video. I think I might have to do this to mine. What is the finished with does it add a true 4"? Thanks love watching you.
Thanks buddy, the spacers are 2” each so it will add a full 4” total width to your rear axle. I’m glad you been enjoying the videos!
Man that’s neat woulda never thought that on a tractor makes sense and nice upgrade ❄️ I got them on my truck I went with the farfromstock ones 💪🏻
Thanks buddy! That’s awesome, I plan on getting a set for my Cummins this spring also, can’t wait, I’ll prolly do like 1/2” spacers for that just to give it a nicer stance. Hope all is well buddy!
@@BiffsEquipment yeah I have 2 1/2” on my truck any less you wouldn’t notice much
@@crookedclubhouse what truck do you have?
@@BiffsEquipment 2015 f350 powerstroke
Great video thanks! Have a 2004 BX-23 and unable to use wheel chains for my icy driveway due to rear wheel clearance hoping this will correct this issue. My tractor has no wheel studs though, hope these still fit, right now the link you posted is showing out of stock so I put a watch on them to come back in stock.
Thanks man! Yes the wheel spacers should def give you the clearance you need between your tires and frame for tire chains. I also plan to buy some tire Chains next season as well. As for the link being sold out, copy the title of the spacers and do a fresh search on ebay and I’m sure you’ll be able to find them again that way so you can get them ordered. Lmk if you get some!
Great video. Thanks. I have wheel weights on by BX. Is it OK to also install spacers?
I bough a new B3030 winter cab Kubota about 10 years ago. My 2 biggest complaints about the tractor are that it came with no 12-volt accessory port and the rear wheels were so close to the frame that I needed their spacers to run tire chains.
Dang yah some things on that tractor Kubota did strange but it’s still a great machine for sure. Glad to hear you got it ironed out with the spacers man
Kubota even offer a 2 inch sparser for the box from the diler and they work till good on the one I youse to have
Thats great man. Thanks for watching!
As a fellow New Yorker (Finger Lakes) I find all your videos particularly helpful.
Are you still running without issue with loaded tires? And did you ever install spacers on the front? Thanks!
Thanks Bob! Always great to meet another NY’er! As for the rear spacers they are still on there and working great; every video you’ll see after this one I had them installed for and they have out up with a lot of abuse with no issues what so ever. I never ended up doing the front spacers because there really is no point in doing the front as the front axle articulates anyways. Plus it looks nice the way it is so I just left it. Hope this helps and tbanks for the support!
Defiantly a more proper look about that. Better on slopes too.
Yah man, def looks better now doesn’t it? It’s more stable now and has a lot more traction too which is something I wasn’t expecting would improve all that much but so far in the snow I noticed a huge difference with traction having that wider footprint
@@BiffsEquipment yes for sure! It gives it a better stance and looks like a tougher set up. I’m sure it’s more stable in the snow with the wider foot print, cool job on that 👍🏻
Hey Biff, do you run a 60" mid mount mower with these spacers?
If so, how close are the tires to the deck wheels. (???)
Thanks buddie, always great videos.
Hey Larry, sorry I’m only just seeing your comment! Yes I run a 60” deck, the 2” spacers will not fit a 50” deck. I have about 1-2” of space between the guide wheels and my tires so there is plenty of room. So far I havnt had a single issue with these wheel spacers they have been working great! Hope this helps!
FWIW: Bora specifically prohibits the use of air or impact tools to install their spacers. I don't know if that applies to your spacers. Just a thought.
I don’t see how it would hurt them so long as your careful but thanks for the info. These ones did not have that warning on them. I’m assuming it’s because they are afraid people will either break/strip the studs or that it may strip the splines on the aluminum hub that the studs are pressed into. So far I havnt had any issues with mine and I only use an impact gun but thanks for the comment! Sorry I’m only just now seeing your comment BTW, youtube tends to hide them on me from time to time
Any suggestions on chippers for a bx 2380? I see titan attachments has a nice one . I'm relieing on you.
Hey Doug, Iv heard Land Pride makes a good wood chipper and I know a few guys who have one.. check out “O&D life” on youtube he is a friend of mine who has a wood chipper on his BX and he’s been very happy with it, has quite a bit of videos on it from what I remember. Titan also makes a decent one I think but i don’t know anyone who’s ever owned one. I’d check out Land pride their stuff is usually pretty darn good for their prices
Hey Biff. I just ordered a set for my LS MT 125. They are the ones that you got. I hope they fit.
Hey Dan that’s great! They should fit no problem at all long as you got the correct lug pattern and spacing for your machine. If you call your dealer they should be able to tell you what the spec is and then you can search for that exact spacer.. it may be the same as the Kubota BX but I’m not totally sure as some manufacturers use different lug patterns and stud spacing .. let me know how you make out!
Would those spacers interfere with a mid mount mower?
Only if you have a 55” deck, if you have a 55” deck you’ll wanna go with 1.5” spacers no thicker, hope this helps!
With a 60" mower deck, you can have 2" spacers. I have both.
Can you confirm these work on all BX series tractors? I have a now defunked BX1500D model and think it would greatly benefit from the wider wheel stance.
Hi Biff, this past winter I added the same 2" wheel spacers to my bx2380. I have a steep slope in my back yard and have been in a couple of precarious situations with the loader on. The wheel spacers seem to make quite a difference and were very easy to install. Just hope my 60" MMM fits without rubbing on the tires once I put it in for this mowing season. I measured and it will be close. Do you know if it should fit without rubbing?
Hey Paul sorry I’m just seeing this! Glad to hear about the 2” spacers you added, it really does make a night and day difference! I know I’ll never be with out them again myself. As for will it clear the 60” mower deck yes it will clear no problem at all. I run a 60” mower deck on my bx and Iv got no issues with rubbing nor do I have any issues getting the deck on or off so you should be set. 2” spacers work with the 60” deck where you need 1.5” spacers for a 54” deck. Hope this helps!
Any idea of these spacers are compatible with the kubota b2301?
How are the wheel spacers holding up so far? Has it voided your warranty??
good video but I can't find the link for the spacers.
Sorry Rick I forgot to put the link in the video description, I’ll make sure I do it today for you, thanks for watching!
Hey Rick I finally had time to put the link in the description for you guys. Hope it helps!
@@BiffsEquipment Thanks
Biff, I did 2” spacers on the rear due to having a 60” deck. Made a huge difference mowing hills. I am wondering if front spacers would help even more.
I actually heard that front wheel spacers is a bad idea. Not sure the exact reason but heard it from more than 1 person. I have same setup as you.
Awesome buddy glad to hear you did the same, they make a world of a difference on these little tractors for stability and even traction too. Front wheel spacers won’t help any for stability tho as the front axle pivots anyways.. this is why most guys leave the front axle alone but I have seen guys add spacers to the front just for the looks of it but I feel it looks perfect the way it is wirh just the 2” rear spacers as most tractors have the rear wheels farther out than the fronts for stability. Thanks for watching!
@@maineoutdoors8227 I would agree. Front wheel spacers are kind of a waste of money unless your only doing it for looks.. The front axle pivots and this is why wheel spacers in the front will make no difference with stability and why most only do the rears. Thanks for your comment.
Looks like the center of tires align front to back now, which can help in muddy conditions. Do you think the 2" will cause any interference with the mower deck? Nice video Mike, have a great weekend.
Thanks buddy, yah I agree it’s gonna help a lot with traction I’m thinking.. you look at diesel trucks that do sled pulling and they all widen their stance for better traction and more displacement to the ground. As for the deck interference if you have a 60” deck you can do 2” spacers or less and if you have a 55” deck you need to do a 1.5” spacer or less otherwise it will rub, thanks for watching man I hope you have a great weekend 👍🏻
do they make front wheel spacers. If so who do I get them from
So, did this void the warranty?
thinking about the spacers on my bx 2680 as well as my dads bx 1880 only concern is how the belly mower fits after spacing the wheels its tight to start with have you ran into any issues using your belly mower? i have a 60 inch mower and pops has a 54 inch.
Hey Mike, I havnt had a single issue running the 2” rear spacers with the 60” deck and neither will you but for your fathers your gonna want to run 1.5” spacers maximum because the 2” spacers will rub the deck mounts.. Iv never had an issue tho and I mow weekly with my BX in the summer and take my deck on and off pretty much weekly sometimes twice each week. Lmk if you have any issues 👍🏻
Kubota sells wheel spacers and installs them on new tractors. I don’t see how they can deny warranty based on this.
I agree man, Kubota didn’t sell them yet as of the making of this video I don’t believe.. and from what I heard installing your own spacers could void warentee such as if you suddenly have an axle seal start leaking after the install then I’m sure they could give you a hassle. Always better to be safe and double check first is mainly what I was getting at, as I would hate to kill someways warentee by them doing what I did in this video so def do your research and just make sure first. Kubota may want you to use their own special spacers and they may only warentee the wheel spacers up to a certain thickness as the more thickness you add the more leverage and strain your adding to the axles, bearings, and seals. Thanks for the comment 👍🏻
Why wheel spacer? Stability?
Hey Huck.. Yep We add them for stability.. It makes a HUGEE difference with these little tractors when you widen the rear by 4" (2" spacers for each rear tire) The fronts do not need to be done .
I have a BX 2380, would 3” spacers be a huge advantage over 2”? First
time tractor owner, thanks.
Hey Runner.. you don’t need 3” spacers.. 3” is way overkill.. it would make it a tad bit more stable but the issue is when you start putting the back wheels out that far from the axle of the machine is you start to put way more load on the axle bearings and seals that it was meant to handle and could have issues down the road.. i would stick to 2”.. there are many many guys using 2” spacers including myself so it’s proven not to do any damage and is proven to make a HUGE difference in stability. Hope this helps!
Holy smoke, he speaks so fast I can’t understand a word.
Sorry about that but it was a LOT of info I was trying to rattle off before I got started. I try not to leave out any info when I’m doing install videos and if I talk slow the video becomes too long. My newer videos are better though. Thanks for watching
Are you finding a big difference with the spacers? I been thinking of putting some on my tractor as my property is is hilly
Hey Patrick, so far It’s made a huge difference, it’s much much more stable now in hills and slopes and I also feel it’s got a lot better traction as well with the wider footprint. Hope this helps 👍🏻
Great video. Its been about a year and a half since you made this video. Are you still happy with these spacers?
Hey Marty, yep the wheel spacers are still on my tractor.. so every single video you see after this one has been with the wheel spacers on as I have never taken them off since this day. They work really good and we’re one of the best upgrades I have bought to date!
@@BiffsEquipment I am glad to hear that as I just installed a set on my BX23s this pass Sunday. I havnt had a chance to test them. Thanks again for the great video.
Looks great, will the spacers effect mower deck rear wheels?
Thanks Brad, if you have a 60” deck you can get away with 2” spacers, a 55” deck needs 1.5” spacers for the max otherwise the rear wheels will hit the guide wheels on the deck. Thanks for watching
Will the 2 inch spacers work with a 54 mmm deck.
Hey Scott, no the 2” spacers will rub on a 2” deck, it will hit the guide wheels, you’ll need to go with 1.5” spacers if you plan on using a 55” deck on Your tractor. 1.5” spacers should still look/work great tho. I know a few guys running them 👍🏻
@@BiffsEquipment thank you for the info
Biff thanks been thinking of spacers do they interfere with belly mower
God Bless All
PaK
Not if you don’t go more than 2 inch
If you have a 60” deck you can go with 2” but if you have a 55” deck you will need to stick with 1.5” spacers otherwise the tires will rub the deck. Thanks for watching!
@@BiffsEquipment thanks
Don't see the link for these spacers.
Hey Ken I forgot to put the link in the description but I’ll get the link posted today for you guys
Hey Ken, I finally found time to put the link in the description of the video for you guys, so go check it out and let me know if you need anything else.
You may have addressed this previously but the receiver hitch on rear frame with clevis. Please tell me about it ,how attached and sourced from ? Thanks
Hey Brian, I made a video on it a long time ago when I first started my channel and explained how I made that reciever work and where I bought it from. It’s made by Reese. I’ll include a link below where you can find that video. Lmk if it helps.
LINK:
th-cam.com/video/yDOuC2Aldi8/w-d-xo.html
Biff I have the back hoe on mine which adds more weight to the rear and more the the hubs? have you ever had a backhoe on yours?
I have never owned a backhoe for mine but I’m assuming it would hold the weight but I have real no way of knowing. I have 400lbs of rear ballast tho and it’s never been an issue and I work my tractor hard which is why I’d assume it would be ok. Your backhoe prolly weighs a little more tho plus it hangs farther off the rear too
I ordered a BX23S and get it in about a month. I plan to use it to clear and level some light bush and remove some very small stumps (2" - 4"). The area that I will be using it is down a slope, maybe a 10% grade so I know I have to be careful with stability. I've never owned a tractor and only operated a friend's with a loader a few times. The video is really good, I wasn't aware you could add spacers...My concern is the warranty and stress on the axle, have you had enough time to put yours to work to see if any issues?
That's great to hear Jim congrats on the new purchase! I'm surprised you were able to find one that was only a month away cuz of the virus its hard to get ahold of any type of equipment these days so I'm glad to hear it. As for the spacers I have had them on my tractor since this day and have done a ton of work with my tractor since, Iv lifted extremely heavy loads with the bucket.. logs with the grapple, plowed lots of snow and a bunch of other stuff.. the tractor and spacers have held up perfectly fine and I doubt you would ever have to worry.. If anything ever did happen it would prolly be the rear axle bearing wearing out prematurely ..that's about the only thing I see that could happen and if that does happen just take the spacers off and bring it back to the dealer. (You didn't hear that from me tho lol)
PS If you go to my channel page and click on the "videos" tab you'll be able to see in order all the work iv done to and with my tractor since installing these spacers.. All the videos that come after this video all were done with the spacers still installed. Stability is MUCH better now.. its a night and day difference. Thanks for watching!
@@BiffsEquipment I received the following from my dealer regarding spacers for a BX23S: "the widest we can get is the 2.5” total. Kubota does not recommend going wider, with the backhoe attached it creates an issue where the rear axle is too spaced so that the weight of the backhoe with a wider stance can cause broken rear axles"
I thought initially he meant 2.5" spacers, not total. I don't see why a 600lb BH puts much more stress than other implements on the back or a ballast box. 2.5" total doesn't seem like that much to make a difference...Plus $250 for the two 1-1/4" spaces is expensive, I assume the ones Biff installed come in 1-1/4 too so if I do put them on I'll get these..
What cab is that?
Hey Nick, the cab I have is made by “Original Tractor Cab” if you go to OriginalTractorCab.com you’ll be able to see their product lines.. also if you click on the “playlists” tab when your on my channel you’ll be able to see a playlist Chuck full of content all about this cab.. upgrades, add ons, and more!
I have a new video dropping in the next hour as well 👍🏻
Biff, what was the final overall width of the tractor/tires with the spacers? 48”? Or what?
Hey Roberto I’ll try and measure it for you next time I’m out by the tractor and see if I can report back 👍🏻
Are the spacers sold individually or a pair? The link you posted isn’t really clear. Thank you.
Hey Greg They are sold as a pair
@@BiffsEquipment Thank you. Why are others so expensive? Maybe you don’t have the answer to that?!
Would these spacers work for a bx1880?
I think you’ll have to step it down to a 1.5” spacer for your tractor because if the smaller deck and smaller tires but I can’t fully remember. A quick google search should find you the info your looking for.. or take a look through the comments section on this video as there was a lot of talk in there about what they would fit and what they wouldn’t
@@BiffsEquipment Okay thank you for your reply.
Well I ordered these, and they work great. I don’t use a mower deck. I have a 48inch brush hog from Rural King. Thanks for your videos they are very helpful. 👍
I saw 4" BX wheel spacers on EBay by BORA for $340.00. Do you think this would create any safety or warranty issues?
4” is pretty darn wide.. I don’t think I would ever want to go that wide as it would out a ton of strain on your rear axle.. 2-3” tops is all you would ever need.. 2” spacers alone give you way more stability then you’d think.. I got my 2” spacers for under $50 delivered so I wouldn’t but if you really want to go with BORA and don’t mind the wheels sticking that far out then you can try it.. I just feel it would hurt your rear axle over time
Is the torque on the spacer 95# also?
Hey David, yah I would torque the spacer to the same specification as Kubota recommends as it’s the same size fasteners
@@BiffsEquipment great drone footage...whats the range on that thing?
@@davidparadis490 thanks buddy, it will fly about 4 miles away with full HD video, it’s been a. Great drone so far. I use to have a phantom 3 before I started my channel but sold it before I got my channel going and ever since I started my channel I been wanting one and finally picked a new one up around Xmas time.
Looks like this would hit the belly mower on the left side.
Hey James, The tires do not rub on the mower deck.. 2" spacers are well known to work perfectly fine as long as you have a 60" deck.. If you have a 55" deck then youll want to run 1.5" spacers no larger.. If you check out my most recent video where i built a weight bracket for the front of my tractor youll see in that video that the rear tires do not come close to rubbing on my mower deck as i have the deck installed in my most recent video. Thanks for watching!
I wouldn't do it.