Very informative, looks like I will be putting this to use soon. Any other proggies or programing BCM/ECMs? I am pretty familiar with command line computing, some Linux and FORTRAN as well. Thanks for the video, I appreciate your time/efforts. E.I.E.I.O.
People looking to buy a cable, it is important that u buy a cable that communicates at 5.0V, NOT 3.3V. That is where people mess up buying cables. I got mine from ebay from chinaland for 6$ took 2 weeks to arrive. you need a ftdi rs232RL aldl 5.0v ttl usb. Then buy a blank obd2 connector and soder the rx and tx communication wires to piin 9 and the ground wire to pin 5 i think. This will let u change settings in car. But beware. On bench like in the video is safer. Do not input random bullshit into cluster while in car. DONT FORGGET TO MAKE SURE ITS 5V TTL!! not 3.3v
Very informative, looks like I will be putting this to use soon. Any other proggies or programing BCM/ECMs? I am pretty familiar with command line computing, some Linux and FORTRAN as well. Thanks for the video, I appreciate your time/efforts.
E.I.E.I.O.
Hi when you are in the VZ mod program do you know how to turn off the air bag light?
i did the 4l80 swap and can not get the speedo right in hp. and trying to find out how to do in in the vz. do you have a video or a how to?
People looking to buy a cable, it is important that u buy a cable that communicates at 5.0V, NOT 3.3V. That is where people mess up buying cables. I got mine from ebay from chinaland for 6$ took 2 weeks to arrive. you need a ftdi rs232RL aldl 5.0v ttl usb. Then buy a blank obd2 connector and soder the rx and tx communication wires to piin 9 and the ground wire to pin 5 i think. This will let u change settings in car. But beware. On bench like in the video is safer. Do not input random bullshit into cluster while in car. DONT FORGGET TO MAKE SURE ITS 5V TTL!! not 3.3v
TH-cam Spammed comment now approved :)
Is there 1 cable that you can buy that’s a direct plug in no soldering or wiring required?
Can I program miles with this?
Negative
I can't get this to work in bench mode, keeps trying to send a preset then gives error 9....any ideas?
Wiring?
If I swap clusters will I need to do this
No
My display screen went out bought new cluster does it need to be programmed to install or do I just swap them out
miles will stay with the cluster
Do you think an obd Bluetooth adapter would work?
Doubt it
Does anyone know if this is the same process for a VY cluster?
should be I would think
The link for the program isn’t available.. anyone know how to get it??
1337vending.com/
Link goes to screen with no selection in link you posted 6 days ago.....link at top says tracerror
@@SpartanAutoworx
Chris Rod the program is now back up give it a try!
Aye man anyway you contact me
Email us.
What's your guys email?
What is the program to do this and how do i remove the cluster?
VZ Clustermod
If you need to ask then you shouldn't be touching it