How To Remove & Reinstall A John Deere 1025r AutoConnect Deck
ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2018
- Watch how to remove and install a John Deere AutoConnect Mower Deck on a 1023e, 1025r, and 1026r. This applies to the John Deere 54D 54" drive over mower deck as well as the John Deere 60D 60" drive over mower deck. We hope you enjoy this brief tutorial and that it helps you with your John Deere AutoConnect mower deck installation.
A few tips on uninstalling and installing a John Deere AutoConnect deck include:
Keep the objective in mind of getting the bottom edge of the mower deck to touch the ground.
Ensure you're on a smooth, level surface.
Release your gauge wheels before lowering the deck to the ground.
If your rear hanger arms won't lock or release, give the deck a little wiggle.
Make sure you're in four wheel drive and low range.
Most important, after removed, make sure to raise your hanger arms to the highest position. You want to keep the arms and PTO connector high and out of the way while doing utility work to avoid potential damage.
SHOP: www.goodworkstractors.com
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstractors
FOLLOW: / goodworkstractors
You can support Good Works Tractors in a small way at no extra cost by purchasing a product in a link below. Certainly no pressure and I only recommend products that I've used and love!
Tractor Cleaning & Detailing Products Used On My Tractors Include:
Amazon Basics Micro Fiber Cleaning Cloths: amzn.to/2O261gk
Torq X : amzn.to/32Jf3Tp
Generic Magic Erasers: amzn.to/34FTKUC
Meguiar's 105 Ultra Cut Compound: amzn.to/2NiCCir
Meguiar's 205 Ultra Finishing Polish: amzn.to/2O31qdH
Car Guys Super Cleaner: amzn.to/2Lz1dxg
Car Guys Liquid Wax: amzn.to/305X4ZC
Car Guys Wheel Cleaner: amzn.to/3014Uov
Car Guys Tire Shine Spray: amzn.to/2Oal1Zo
Car Guys Plastic Restorer: amzn.to/300vuNI
500 Lb. Storage Cart w/ Casters: amzn.to/2O5wdqm
These are affiliate links and I do receive a small commission. I would appreciate your support! These tractor cleaning and tractor detailing products are some of the best I've used. I'm constantly trying new products to provide a superior finish. If you have a suggestion of a product I should try, then please let me know!
This video is brought to you by Good Works Tractors. If you're in the market for a tractor or attachment, then please shop at Good Works Tractors! www.goodworkstractors.com - บันเทิง
Watch this updated AutoConnect video of mine! Much better quality and detail! Well, at least I think so 😂 th-cam.com/video/thWxXeXQahA/w-d-xo.html
Very informative ty for showing that
The deere in your video is very nice! Shes optioned with the switch, to raise and lower the deck, which is nice. Looks like there are additional hydraulics in the rear. Deere designed it without a cab, so you can enjoy the full effect of how well that engine sounds
Yes, she's a very clean machine. That switch to raise and lower is really cool as well. :)
You forgot to mention that when you drive back over the mower deck for reinstallation, "listen for the click" as the rear silver attatch lock snaps into place on the mower deck. Nice video demonstration.
Hard to hear that and it doesn't always happen. However, I did put a note in the video that those silver latches often times lock into place on their own :)
Thanks for watching and the feedback!
Good Works Tractors. Understood. I can usually hear it click on mine. Its a 2017. What year is yours? Awesome video. These gauge wheels are somewhat confusing to me as ya cant use them for the mower deck height adjustments while mowing & they dont pivot if they were to be used in such a manner. Perhaps im not understanding something about them. . . . . . . . i dunno.
Cool channel, like the videos
Thanks a lot and thanks for watching!
Hey love all of your videos and watch them weekly. I have a John deere 1025R and the belly mower deck front hanger arm angle is way to high and gets caught on the front metal guard. Do you have any videos or could you create one to show how to adjust the deck hanger arm? Tried to get service department to fix it multiple times but they are horrible and I can’t tell how to adjust it. Thank you
I just picked up a new 1025R and I’m having a hard time with the rops position how did you get yours to hang down the way it is without hitting the three-point hitch or bouncing against the toolbox. Do you have a different type of bracket at the top?
Just got a 2023 but mine doesn't have that bar on the back
Looks like a 54”. I ordered mine w a 60. Dealer told me it’s easier to couple and a better deck. Thoughts?
If you read the various JD forums, then you'll get opinions all over the map. No one size fits all in my opinion. However, connecting and disconnecting is the same regardless of deck size.
I have a 2018 1025r and I have trouble if I try to take the deck off on flat hard concrete it seems to always move. I even got it stuck so bad I bent a rod and had to jack the tractor up to get the deck off. In your video I see the lock slipped back into place and you had to unlock the latch again, maybe that is what happens with mine. How do you know that’s the problem when your sitting on the tractor, if you start to back up and the deck moves? I thought it would probably move some before it disconnected. I seem to have better luck on the grass then concrete. Any suggestions would be appreciated.
Couple things to keep in mind/try...
The overarching goal is to get the mower deck to be resting on the ground. make sure the mower cut height is all the way down to the install position, make sure gauge wheels are released, and then lower the deck. The bottom edge of the deck should pretty much all be touching the ground. Not entirely, but most of it.
Then, flip that silver retainer bracket up. It should stay unlocked. Put the tractor in low range and four wheel drive and back up. That latch is spring loaded, so if you don't open it the entire way, then it will try to spring back closed.
Many times when you drive back over the deck, that spring loaded latch will automatically release and go into the locked position behind the black rod.
Hopefully that helps, otherwise you may need something to be adjusted slightly on your deck.
I have a 1025R with the 60-in deck. But My mower deck tilts forward towards the front of the tractor really bad how do I adjust that?
I have to raise the little tabs individually I don’t have a bar
Am I doing something wrong.. I have my knob in the install position and have tried to lower the hydraulic lift arms under the unit but they won't go down unless I push them down while pushing the lever down? Any tips?
Try this improved video...thanks. th-cam.com/video/thWxXeXQahA/w-d-xo.html
I have a 1025r with a 60 inch deck. I can't get it to release, any tips??
No more solid bar across the back, two little rocker levers now.
Where can I get those pins that stop the deck wheel posts from falling through?
Most any hardware store or worst case TSC or Farm and Fleet.
Has the rops been modified or is the older models shorter than the newer ones?
It's simply folded in half. Standard feature on all 1 Series. Thanks for watching!
To me its looks like it is shorter compared to the one i have.
I would have preferred him to show us with the camera exactly which knobs and levers he was turning. The vantage point of the video camera only captures the side of the tractor which does not have the knobs and levers.
I'll make a better video at some point. Always room for improvement.
This is such bull! I want my Kubota back. I hate this thing