The exile stuff is pretty interesting. They have a 3D printed muffler for the MS261, cool to see a company use that kind of tech for aftermarket saw parts.
Done full porting on my MS660 from XS, then added the original shotgun dual exhaust plate from Exile. Makes quite a difference in the big cuts. Haters will hate, but that's just how they are. Nice demo
I absolutely hate the dang new stainless mufflers like on the 500i and 661. Makes them a joke unless you have a tig welder or just spray paint it. Great looking add ons tho 👍🏻
You can take a punch and put it in through the muffler and knock that baffle outta there. Its easy and it comes out fairly clean. Its only spot welded. I dont much care for that exhaust because it points the wrong direction but to each there own. If it works it works.
Only word of caution is use some doil tape under the muffler with the covers,they put alot of heat on the oil tank risjing the crank case gasket. Exile is the only copany thatoffs a muffler dront pointed corrrectly.
I put the little dwags off a smaller stihl on mine. I don’t fell trees with the saw so big dawgs are just in the way. I like the look of the muffler cover but also like having the exhaust outlet pointed at the chain so it doesn’t get the log im cutting hot
@toddadams9965 We are not the maker of them. We are a dealer for them. They do make a muffler for the 372. I just don't currently have them in. They are allot more money than just covers since they have to make the whole muffler. The manufacturer is working on making more for other models, which just takes time. They have to prototype, test, and then produce
They will burn more fuel under load in the cut with wide open exhaust and make more torque if it's a little rich which to me is better than more rpm. I have neotec 92.
Where are the uppers opening? I would build it this way . Let the Exaust where it is. Widen intake and exaust 25 thou sqish with 200psi Compression. Choose Bpmr8y Plug and 25 deg pre ingnition. Than check or optimise your uppers. Thats my way , do what you would do!
The exile stuff is pretty interesting. They have a 3D printed muffler for the MS261, cool to see a company use that kind of tech for aftermarket saw parts.
Very nice Boedy! It's always nice to see how each mod positively effects the performance of the saw. Keep up the great work man!
Thanks 👍
The good bolt-on's are always fun! Great looking parts👍🏻
Love Exile parts sounds great on a 372 as well. Heavy duty dogs awesome stuff !!
Done full porting on my MS660 from XS, then added the original shotgun dual exhaust plate from Exile. Makes quite a difference in the big cuts. Haters will hate, but that's just how they are. Nice demo
Cool parts. Wish mine was that easy.👍👍
Looks good and sounds good. I might have to get one
Very nice. Great video as always
I absolutely hate the dang new stainless mufflers like on the 500i and 661. Makes them a joke unless you have a tig welder or just spray paint it. Great looking add ons tho 👍🏻
👍👍 good runner!
Morning Doug!
what size bar is that?
Yeah those dogs look pretty darn sweet
Hey Boedy
You can take a punch and put it in through the muffler and knock that baffle outta there. Its easy and it comes out fairly clean. Its only spot welded. I dont much care for that exhaust because it points the wrong direction but to each there own. If it works it works.
We have one that points the other direction, just out of stock on the G660, MS660 clutch side muffler cover.
That ms 660 runs pretty good. Before doing any more port work I would try a 8 or 9 pin sprocket on that saw.
Only word of caution is use some doil tape under the muffler with the covers,they put alot of heat on the oil tank risjing the crank case gasket. Exile is the only copany thatoffs a muffler dront pointed corrrectly.
I put the little dwags off a smaller stihl on mine.
I don’t fell trees with the saw so big dawgs are just in the way.
I like the look of the muffler cover but also like having the exhaust outlet pointed at the chain so it doesn’t get the log im cutting hot
Depending on the model, we have ones that face the opposite direction.
@@Tri-starsupplyllchave you considered making a “Stihl-esk” type of muffler in a 2pc variety that would fit other saws, say a 372? Just a thought 🤔
@toddadams9965 We are not the maker of them. We are a dealer for them. They do make a muffler for the 372. I just don't currently have them in. They are allot more money than just covers since they have to make the whole muffler. The manufacturer is working on making more for other models, which just takes time. They have to prototype, test, and then produce
👍
Nice!
Boedy, will that ENTIRE muffler (both cover AND CYLINDER PIECE) bolt onto a 372?
Nope. They do offer one for the 372, but it is quite expensive. I believe it is somewhere in the neighborhood of $160
Thanks!
Thank you!
That muffler mod would look sweet anodized a different color. Get the dawgs done to match to 🤔.
They will burn more fuel under load in the cut with wide open exhaust and make more torque if it's a little rich which to me is better than more rpm. I have neotec 92.
Good morning Mr novice!!
Morning D😁
@@Doc-Cole_Trickle-of-ChainsawsGood Morning Mr D!!!!!! 👍🏻
@@dubbssawshop🙋♀️T-Dubb
So, how much does it cost to make your saw way noisey and your usable bar an inch shorter.
👍🆙BigGuy
🙋♀️Doc
Can you make 1 for a sthile ms 390 saw, or direct me to someone that can build it.
Any decent local fabricator should be able to cut holes and weld pipes to a muffler. Just bring some pictures of what you want so you can show them.
🙋♀️Boedy
Where are the uppers opening?
I would build it this way .
Let the Exaust where it is.
Widen intake and exaust
25 thou sqish with 200psi Compression. Choose Bpmr8y Plug and 25 deg pre ingnition.
Than check or optimise your uppers.
Thats my way , do what you would do!
Send him one of your builds 2 put in a Wack-off and find out
@@amberwhite7761 to expensive from Germany
Nice sawrus funtime cutting wood 🪵 👌