The One Maintenance Service Every Auto Repair Shop Should Be Doing!

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 197

  • @loveandbaconbrian1901
    @loveandbaconbrian1901 8 หลายเดือนก่อน +6

    To answer your question I’d say a video on anything you do which has a special twist to it from most shops - which so far seems like everything! What a clean, professional operation… And your kid’s night is truly inspiring. Thanks for the great content and for raising the bar!

  • @georgeanddaddecker7563
    @georgeanddaddecker7563 9 หลายเดือนก่อน +16

    Walnut blasting is the most effective. Leave combustion chambers looking like new.

    • @billmonroe8826
      @billmonroe8826 9 หลายเดือนก่อน +4

      It seems with this problem the manufacturers should figure out something better because aspirated engines don't carbon up.

    • @jdtractorman7445
      @jdtractorman7445 9 หลายเดือนก่อน

      The problem is with direct injection vs. port injection. Port injected motors don't have these issues because it puts fuel at the back of the intake valve, thus keeping it clean. Direct injection is directly in the cylinder. With no gas hitting the back of the intake valve on DI motors, you have bad carbon buildup. @@billmonroe8826

    • @lynxstarautomotive208
      @lynxstarautomotive208 8 หลายเดือนก่อน

      @@billmonroe8826Rhey have started to play with the timing tables, and have managed to help cut down on the carbon build up a ton. Mercedes Benz doesn’t have this issue. You will find some of their engines with over 100k and minimal build up.

    • @georgeanddaddecker7563
      @georgeanddaddecker7563 6 หลายเดือนก่อน

      @@billmonroe8826 They did, the solution is to have both gdi and port fuel injection. This way the port injection cleans the intake ports when it is running at certain times. This is why port injection engines never had this issue. The problem is only certain models have this combo, usually top tier models, as it is more expensive to manufacture.

  • @lescarlock4405
    @lescarlock4405 8 หลายเดือนก่อน +14

    Just you tube surfing, and came across this channel!
    I do all my own preventive maintenance, on my 16 f150 3.5 eco!
    I just did my second walnut blasting, at 88000 miles!
    First time at 68000, and thought nice day to just take a look at the intakes!
    They weren’t really too bad, like they were the first time, but it sure didn’t hurt to clean them again!
    I do oil changes at 3000 miles!
    Oil life shows usually 53-57 percent Life left!
    When I first got the truck, it had 33000 on it!
    I trusted that oil life!
    Until I started writing down mileage! Found out I was putting on 7500-10000 on that oil!
    For an old man,(71) it’s not real easy to climb around that motor, but at least I know what’s done!
    I’ve changed all drivetrain fluids, coolant, brake fluid, I rotate the tires my self!
    Oh, and I do have oil catch cans on it also!
    Thanks for showing before and after pics of those intakes!
    Great video!

    • @andrewnevermind4902
      @andrewnevermind4902 8 หลายเดือนก่อน +1

      You take better care of your motor than i take of myself.

  • @kauaiboy111
    @kauaiboy111 8 หลายเดือนก่อน +10

    Toyotas have port injectors to help reduce this type of carbon. Thanks for this video! ❤

    • @user-pj5ff6xw4x
      @user-pj5ff6xw4x 2 หลายเดือนก่อน

      Toyota also has GDI engines in a lot of their models.

  • @seanshute9284
    @seanshute9284 9 หลายเดือนก่อน +18

    The slight camera pan to catch Clayton eating his banana 🍌 😂😂😂😂😂😂😂😂😂😂😂
    You guys are the best, informative, professional, and now hilarious.

  • @1983dmd
    @1983dmd 8 หลายเดือนก่อน +3

    Yes, I would like to watch you when fixing cars , anything is interesting, with all the details w/o skipping steps and explaining all the way.

  • @simplygregsterev
    @simplygregsterev 4 หลายเดือนก่อน +4

    Im a Euro repair shop. The amount of EA888s we get in with misfires where other shops have fired the cannon at are insane. All they need is a cleaning and in some cases a new intake manifold.
    There are some good products around GDI intake spray that actually work “okay” as a maintenance solution after a proper cleaning has been done. Stick with good quality oil, low saps and change it regularly

    • @rjmari
      @rjmari 2 หลายเดือนก่อน

      What intake sprays do you recommend for maintenance after walnut blasting? And what is your recommended delivery of the spray? Can it be sprayed down the spark plug holes? Or does it need to go through the actual intake?

    • @simplygregsterev
      @simplygregsterev 2 หลายเดือนก่อน +2

      @@rjmari needs to go through intake. There are a couple options now. We use CRC GDI cleaner and have had really good results.

  • @mshaw290808mi
    @mshaw290808mi 8 หลายเดือนก่อน +9

    This issue is one of the main reasons I bought a RAV4, Toyota added GDI but left port injection so the valves would get sprayed with gasoline keeping them clean.

  • @tylerparsons9626
    @tylerparsons9626 8 หลายเดือนก่อน +7

    Probably one of the most underrated shops on social media right now! Love the content you guys put out and the shop always seems well ran and well put together! Fantastic!

  • @lucassutton5539
    @lucassutton5539 8 หลายเดือนก่อน +2

    Repair videos and shop stuff for sure, thanks for your videos and keep up the good work.

  • @gilmertime14
    @gilmertime14 9 หลายเดือนก่อน +11

    We have had very good success with the BG Platinum Service. An often overlooked service and usually due to lack of educating the client.

    • @ericl8593
      @ericl8593 7 หลายเดือนก่อน +1

      That’s what I was inquiring about using a chemical clean as a preventative maintenance option

  • @CalAdkins
    @CalAdkins 8 หลายเดือนก่อน +3

    I started using Amsoil PI additive every 5000 miles to try and prevent this and keep clean.

  • @hoyinwong
    @hoyinwong 8 หลายเดือนก่อน +2

    Your videos are excellent ! Whatever you want to shoot, we want to see. Diagnostics, repairs in progress, your "thinking process" when trying to figure out particularly difficult to determine problems, and yes, tips for shops to consider that will improve their customer satisfaction and their profits. Will love seeing it all.

  • @mikesabin8568
    @mikesabin8568 9 หลายเดือนก่อน +7

    Love the channel!!
    Gdi injectors diagnostic is what i would like to see more of.
    Scope and non scope techniques if possible

    • @theroyaltyautoservice
      @theroyaltyautoservice  9 หลายเดือนก่อน +3

      We've got a new tool that should be here in the next 6 weeks to do some testing on GDI injectors. I'm excited to play with it and will definitely make a video using it.

    • @KGauto_Diagnostics
      @KGauto_Diagnostics 9 หลายเดือนก่อน

      Is it the ADDi? I ordered one couple days ago after I watched the demo on Super Mario's channel.

  • @garyhennessey3621
    @garyhennessey3621 8 หลายเดือนก่อน +2

    Yep nothing like a Toyota. Use shell gas and Techron occasionally. It works and keeps things clean.

  • @Trump-The-GREATEST
    @Trump-The-GREATEST 3 วันที่ผ่านมา

    For those that don't know, Autool makes very high quality automotive equipment at a value price! Their smoke machine for example... The Autool SDT 206 is amazingly build from the inside out with quality parts and does an amazing job in finding leak issues fast and reliably! Worth every penny!

  • @davidcampbell1899
    @davidcampbell1899 9 หลายเดือนก่อน +8

    So, its basically $800.00 to $1,000.00 to do this! Thanks to a bunch of Engineers that can keep things simple!

    • @bobw53jrma
      @bobw53jrma หลายเดือนก่อน +1

      They just need to make it through the warranty. And then they can explode.

  • @Mr2004MCSS
    @Mr2004MCSS 9 หลายเดือนก่อน +4

    I like all of your videos so anything you put out is fine by me. Someone can always learn something on any procedure.

  • @donaldmiller3064
    @donaldmiller3064 7 หลายเดือนก่อน +5

    Love a shop that is all about quality

  • @meanodustino9563
    @meanodustino9563 8 หลายเดือนก่อน +2

    I do use CRC intake/turbo cleaner. It works great. Do it to my acura once a year and it runs great all the way through.

  • @BeingInTheMessiah
    @BeingInTheMessiah 9 หลายเดือนก่อน +2

    FOr future videos I think your viewers would enjoy, as well as your employees, kind of a "this is how the shop operates, but it wasn't always this easy, this is how I got into automotive repair" Include personal development alongside just the nitty gritty. People need to believe they can achieve great results in their career like you guys.

  • @jamesb7224
    @jamesb7224 9 หลายเดือนก่อน +6

    Repair videos would be great. All of your videos have been great

  • @luisdaluz4686
    @luisdaluz4686 8 หลายเดือนก่อน +2

    Performed walnut blasting service on several Honda fit's with GDI very common for cold start misfires when cold, just a heads up.

  • @jasonemeric9902
    @jasonemeric9902 7 หลายเดือนก่อน +1

    Just saw this not long ago on rainman Ray's channel too. You guys were way cleaner lol. Really amazing how well it works.

  • @FistingAllNightLong
    @FistingAllNightLong 8 หลายเดือนก่อน +1

    Love your videos. I think more repairs videos would be great. But your informative and diagnostic videos are extremely insightful. Keep it up, thank you!

  • @jrkovar
    @jrkovar หลายเดือนก่อน

    More of all related content. It's all in some way applicable, enriching, informative, and entertaining to most people.

  • @napkins13
    @napkins13 8 หลายเดือนก่อน +1

    I would be interested in both concepts of videos. One where the mechanics are filmed, and diagnostics. Thanks as always for the useful info

  • @Ken-wv2wg
    @Ken-wv2wg 2 หลายเดือนก่อน

    Thanks for educating us on modern maintenance. I had no idea of that process or GDI in general

  • @ysitrim88
    @ysitrim88 9 หลายเดือนก่อน +4

    Awesome that's how i do it.
    Definitely makes the engine run like it's new.
    On and i want to see more repair videos 😊

  • @aciddiver1978
    @aciddiver1978 9 หลายเดือนก่อน +1

    This is why i went back to port injected car. And adding liquimoly valveclean once in a while.

    • @atticstattic
      @atticstattic 9 หลายเดือนก่อน +1

      What vehicle?

    • @aciddiver1978
      @aciddiver1978 9 หลายเดือนก่อน +1

      ​@@atticstattici had opel insignia (buick regal) gdi 2018. Went back to Opel mokka (buick encore) 2013. Buicks are Opel in europe.

    • @atticstattic
      @atticstattic 8 หลายเดือนก่อน +1

      @@aciddiver1978
      I bought a 2016 Chevy Trax because of that

  • @buddaclayton9292
    @buddaclayton9292 8 หลายเดือนก่อน +2

    I use seafaom gdi cleaner to clean my valves at home. Its worked great. love ur videos

  • @icemanddr
    @icemanddr 4 หลายเดือนก่อน

    I have a Hyundai Santa Fe with a 2.4 GDI engine I’ve had a catch can on it since the day I’ve owned it and it’s helped a lot

  • @kevinbosse8866
    @kevinbosse8866 8 หลายเดือนก่อน +1

    You guys should make a diagnostic video of a misfire(s) related to this! Always wondered what they look like on the scope

  • @truthmatters5000
    @truthmatters5000 9 หลายเดือนก่อน +1

    You sold me on it. The benefits are nice. I will share with my boss.

  • @davidcraven277
    @davidcraven277 9 หลายเดือนก่อน +1

    A few years ago I worked with a company that was testing an air filter oil catch system in line for the pcv it worked quite well I haven't seen it production yet

    • @garyganser2451
      @garyganser2451 8 หลายเดือนก่อน +1

      What about a catch can? Mine has a metal honeycomb as a filter.

    • @davidcraven277
      @davidcraven277 8 หลายเดือนก่อน

      @@garyganser2451 that would be great option

  • @redForever1776
    @redForever1776 9 หลายเดือนก่อน +2

    would like to see both diagnostics and repair vids. I love the diag vids and perhaps keep most vids diag vs repair

  • @carlhansen5421
    @carlhansen5421 หลายเดือนก่อน

    I have a small shop and I work on everything so very interested in all your job that you do and you’re specially stuff I subscribe and I’ll keep you in. Keep watching. 1:00

  • @friedrichpsp
    @friedrichpsp 6 หลายเดือนก่อน

    Mazda also recommends this, not sure of the mileage or if you guys have seen many 2.5 Turbo GDI on CX-5’s to know when to consider this. In fact I don’t think I’ve seen a Mazda much less a CX-5 in your videos. Absolutely needed service.

  • @toddmaersch7200
    @toddmaersch7200 8 หลายเดือนก่อน +1

    Really like videos on diagnosis of running issues/ electrical issues, etc. How to's on becoming a better diagnostic technician.

  • @nathandavis931
    @nathandavis931 7 หลายเดือนก่อน +2

    This blew my mind a bit. That’s cool!

  • @parkerassociates9864
    @parkerassociates9864 9 หลายเดือนก่อน +1

    Yes on repair videos and shop operations. Thanks.

  • @chuckbeam7898
    @chuckbeam7898 4 หลายเดือนก่อน +1

    Are the ford rangers bad to do this also?
    And does the catch can eliminate this issue?

  • @doomkid02
    @doomkid02 8 หลายเดือนก่อน +4

    Good thing Toyotas use both direct and port injection on their engines!

  • @MoparDan
    @MoparDan 24 วันที่ผ่านมา

    Boy, I have to write that I’m sure glad I don’t own a GDI engine! I’m very happy with my fuel injection on my ‘12 Chrysler Pentastar V6.On the highway I regularly enjoy 30 miles per gallon with my 200 Touring convertible.

  • @bartscave
    @bartscave 9 หลายเดือนก่อน +1

    I like the diagnostic videos the best. Thanks for sharing your experience and time.

  • @BillCoulter-of5mh
    @BillCoulter-of5mh 29 วันที่ผ่านมา

    An oil catch can does help capture some of the oil mist from the pvc system that causes this issue. Not perfect but you would be surprised how much oil is in the catch can between oil changes.

  • @midiman5045
    @midiman5045 2 หลายเดือนก่อน

    Yes but Toyota has ds4 which is PORT and GDI so that is not needed I think. Thanks for the video it was very informative.

  • @mikemartinez661
    @mikemartinez661 8 หลายเดือนก่อน +1

    Learned something new about gas thank you mate.

  • @sidroniorodriguez3540
    @sidroniorodriguez3540 8 หลายเดือนก่อน +1

    Great channel, I think doing videos off that you mentioned (working on vehicles, running the shop, etc).

  • @DarthDonPedro
    @DarthDonPedro 9 หลายเดือนก่อน +1

    What I like to see videos on the step by step process on moonroofs , seat tracks tear down, lift gate motors and sliding door motors and replacement of evaporators. There not many videos out there on steps and tips for this.

  • @johnyoung4466
    @johnyoung4466 7 หลายเดือนก่อน

    Great video! I really liked seeing the full process. Thanks for sharing!

  • @dannydkasel8296
    @dannydkasel8296 2 หลายเดือนก่อน

    for diesel -> use dry ice blaster

  • @vaughnhoplamazian5209
    @vaughnhoplamazian5209 3 หลายเดือนก่อน

    Great video...can you post the bore scope model # used. Great camera. Thank you

  • @AlHasenfratz
    @AlHasenfratz 8 หลายเดือนก่อน +1

    From the looks of the comments, any of the potential topics mentioned would be well received. Being on the diagnostics/electrical side of things, some ADAS episodes could be interesting. Thanks, Al H.

  • @j83460
    @j83460 2 หลายเดือนก่อน

    Oil catch cans ? I put one on my palisade . Hoping it will help?

  • @dougbackstein2937
    @dougbackstein2937 9 หลายเดือนก่อน +1

    I was doing this on bmw about 12 years ago and buying it from Harbor freight

  • @danpereira6009
    @danpereira6009 9 หลายเดือนก่อน +1

    Process and procedure of scheduling and work dispatch would be cool
    Do you guys do waiters ?

  • @kingofkings2934
    @kingofkings2934 8 หลายเดือนก่อน +2

    I never had luck with the vacuum set up need to be able see what im doing i tape the engine bay with plastic film put a face shield and gloves and go to town😂

  • @gertaabomikkelsen5256
    @gertaabomikkelsen5256 5 หลายเดือนก่อน

    Nice works folks kompliment from an old mechanic in dk

  • @robertedgemont
    @robertedgemont 7 หลายเดือนก่อน

    I would like to see more repair videos please. Also, what brand fender covers do you use? I like those longer ones.

  • @TommyG11814
    @TommyG11814 8 หลายเดือนก่อน +1

    Glad my Venue is 1.6 NA with multi port.

  • @809nel
    @809nel 9 หลายเดือนก่อน +1

    I heard now you can also dry ice clean valves, dying to see it in action.

    • @theroyaltyautoservice
      @theroyaltyautoservice  9 หลายเดือนก่อน +1

      I've checked on it. It's quite expensive to purchase the equipment. Hopefully the price will come down because, from what I've seen, it's awesome.

  • @djosbun
    @djosbun 9 หลายเดือนก่อน +8

    Currently $358 on Amazon, which will pay for itself after two jobs.

    • @AR-il9gk
      @AR-il9gk 9 หลายเดือนก่อน +4

      2 jobs? Man most shops charge 800+ for this..euro shops well over $1000

    • @rmick66
      @rmick66 3 หลายเดือนก่อน +1

      @@AR-il9gk Yeah and the guy in the video pretty much confirmed your estimate.

  • @justobey733
    @justobey733 8 หลายเดือนก่อน +1

    I want to see this intake cleaning on an alfa Romeo stelvio. 2.0 L

  • @JohnAsang
    @JohnAsang 8 หลายเดือนก่อน +1

    At my dealership it is R/R intake time plus 2.0 for four cylinder and 3.0 for 6 cylinder and 99% of customers decline this service. I have seen intake ports 60% clogged with EGR and PCV build up and still after photographic proof the customer decline.

    • @DeloreanGuy2
      @DeloreanGuy2 8 หลายเดือนก่อน +1

      I get why people decline, big money for something they don't see. But 3 hrs to blast out 6 intake ports that take about 5-10 min each? I get the R+R time, but an additional 3 hrs at how much an hr?

    • @JohnAsang
      @JohnAsang 8 หลายเดือนก่อน +1

      @@DeloreanGuy2 that is what technicians in large dealerships don't know. Tech's rarely see the money side. and like I said it is a low volume seller. I have done 10,000 sets of warranty injectors and just tried to get the added time to walnut blast the intake ports, NOPE, If it's not free it is not for them.

  • @ericl8593
    @ericl8593 7 หลายเดือนก่อน +1

    Do you recommend the chemical clean as a preventative maintenance once a year to keep build up from happening ? I understand mechanical cleaning is best and I would have concerns of using chemicals in the intake ! What’s your thoughts ???

  • @Loulito
    @Loulito 9 หลายเดือนก่อน +3

    Okay, I've never seen that before thats NUTS! HAAAA!
    no but seriously never seen that before that before and after is night and day! incredible! I would be jumping for joy if I were the owner of that GDI, I hope you sent them this video!

  • @djmobileautoservices
    @djmobileautoservices 9 หลายเดือนก่อน +2

    I just upload a video explaining this same issue. The carbon build up is really harsh and create alot of misfires due to lost of compression issues. Great video as usual Mr Sherwood. The Autool HTS work really great. Thanks for sharing.

  • @Trump-The-GREATEST
    @Trump-The-GREATEST 3 วันที่ผ่านมา

    Something way beeter than "walnut blasting" is "DRY ICE BLASTING"... It's clean, secured and the best effective way to do the job every time!

  • @papashangosdong
    @papashangosdong 9 หลายเดือนก่อน +1

    Autool makes some great products for a great price.

  • @nickb1488
    @nickb1488 8 หลายเดือนก่อน +1

    Great job!! Thanks!!

  • @jeremystone6613
    @jeremystone6613 8 หลายเดือนก่อน +1

    I’m curious about your comment “the technician gets paid well”. Shops in Australia work on an hourly rate system-eg 8 hours a day with penalty rates added for overtime hours. I’ve always struggled to understand how it works in the States. Does the tech get paid by the hours charged out per job to the customer thus incentivising more efficient work practices? What happens with comebacks and quality if that is the case? How do you pay for road testing and diag time and research?

    • @theroyaltyautoservice
      @theroyaltyautoservice  8 หลายเดือนก่อน +2

      That might be a good video. Let me see what we can do. Thanks!

  • @renemendoza5620
    @renemendoza5620 9 หลายเดือนก่อน +1

    Make repair videos, with explanations of what the customer stated,and how the problem was diagnosed, it dont have to be full diag, just clips of the process with a quick overview of the diag., well atleast that's what I would like to see

  • @gflores7018
    @gflores7018 8 หลายเดือนก่อน +1

    Good to know
    Thank you

  • @danabbene6507
    @danabbene6507 4 หลายเดือนก่อน

    If the problem is caused by oil vapors, would a catch can help prevent it?

  • @jeffhudson1744
    @jeffhudson1744 9 หลายเดือนก่อน +1

    would like to see diesel work also. repair videos would be great.

  • @maskemarr2615
    @maskemarr2615 8 หลายเดือนก่อน +1

    What if you have oily residue on the valves and surrounding area?

    • @theroyaltyautoservice
      @theroyaltyautoservice  8 หลายเดือนก่อน +1

      That could be cleaned with chemicals. Induction service.

  • @arthurmiller8336
    @arthurmiller8336 5 หลายเดือนก่อน

    Does it clean the seats good with the valves close off????..

  • @mechanknuckle
    @mechanknuckle 8 หลายเดือนก่อน +1

    How do you feel about chemical blasting into throttle body every oil change? Would that helo keep the carbon from building up?

    • @theroyaltyautoservice
      @theroyaltyautoservice  8 หลายเดือนก่อน +2

      Maybe if that was done from oil change number 1. It may work better on some engines and not on others because of the intake manifold designs. That's what's so difficult with this problem. So many different engine designs with the same problem.

    • @lynxstarautomotive208
      @lynxstarautomotive208 8 หลายเดือนก่อน +2

      You need to be very careful with the chemical cleaners. VW does not approve this method, and I have seen many engines damage exhaust valves thanks to the chemical process.
      Just good for thought.

    • @bigjay1970
      @bigjay1970 8 หลายเดือนก่อน +1

      And people complain about Honda's J series engines needing timing belt changes!🤔🤯😳

    • @ericl8593
      @ericl8593 7 หลายเดือนก่อน +1

      @@lynxstarautomotive208 just curious how the chemical cleaning would damage exhaust valves ? Aside from dislodging carbon and possible bending a valve but at that point piston rings , bore finish and valves are all at risk ?

  • @ryanmac7377
    @ryanmac7377 8 หลายเดือนก่อน +1

    imagine the person who thought, hey i bet these walnut shells would work to clean those valves. That guy must live outside the box lol.

    • @lynxstarautomotive208
      @lynxstarautomotive208 8 หลายเดือนก่อน

      Media blasting has been a thing long before direct injection came into the picture.

  • @charlesabbott9605
    @charlesabbott9605 8 หลายเดือนก่อน +1

    What's the approximate charge for a four cylinder GDI engine? Thereabouts or a range? One similar to your video?

    • @theroyaltyautoservice
      @theroyaltyautoservice  8 หลายเดือนก่อน

      We charge labor to R & R intake plus .5 per cylinder to clean.

  • @ryanbrown1056
    @ryanbrown1056 6 หลายเดือนก่อน

    That autool is great

  • @Louie88
    @Louie88 8 หลายเดือนก่อน +1

    What happens if you don’t turn the motor over to close the valves and use this Walnut blaster ? Or if one valve was slightly open ?
    Just curious if someone did this and what happened

    • @theroyaltyautoservice
      @theroyaltyautoservice  8 หลายเดือนก่อน +1

      That wouldn't be good. But you could probably suck out the walnut shells thru the spark plug hole.

  • @jeffreym755
    @jeffreym755 9 หลายเดือนก่อน +1

    Ok great video, you sold me thanks

  • @robertscott7537
    @robertscott7537 8 หลายเดือนก่อน +1

    Where can I get the walnut blaster?

  • @snooketcher
    @snooketcher 8 หลายเดือนก่อน +1

    Where was this in the CAFE equation?

  • @johnmikolay4687
    @johnmikolay4687 13 วันที่ผ่านมา

    About what price to do a Buick 2.5 4 cylinder with no turbo 2020 how often should be done how far are you from Jacksonville Florida Thans for all the great info you post

    • @theroyaltyautoservice
      @theroyaltyautoservice  12 วันที่ผ่านมา

      That one is probably right around a little over $1000. We are only 30-40 minutes north of Jax. Let us know if you’d like to come by!

  • @therealcrazyal454
    @therealcrazyal454 6 หลายเดือนก่อน

    Hi would dry ice work ?

  • @lrmastertech
    @lrmastertech 9 หลายเดือนก่อน +1

    Outside of the labor time to r&r intake how much time are charging for the cleaning portion?

  • @bobherweg6442
    @bobherweg6442 9 หลายเดือนก่อน +1

    Could the chemical type treatment get chunks of carbon in your turbo?

  • @JosephVanWyck
    @JosephVanWyck 7 หลายเดือนก่อน

    What grit walnut shells are you using?

  • @1989-v7o
    @1989-v7o 8 หลายเดือนก่อน +2

    I’ve seen dry ice being used I would think it’s more expensive

  • @xxdaemonarchxx3436
    @xxdaemonarchxx3436 9 หลายเดือนก่อน +1

    First! Keep diag videos coming for sure.

  • @pariskennard4540
    @pariskennard4540 8 หลายเดือนก่อน +1

    Thank you for your videos 💯💯💯💯💯💯💯

  • @atticstattic
    @atticstattic 9 หลายเดือนก่อน +6

    What if my car has a nut allergy?😊

  • @naohastress
    @naohastress 9 หลายเดือนก่อน +1

    Awesome video

  • @Benefits-ix9jy
    @Benefits-ix9jy 4 หลายเดือนก่อน

    easy money like wheel alignment.

  • @swav100
    @swav100 9 หลายเดือนก่อน +1

    At what psi do the walnuts shoot out

  • @zaraahmad5618
    @zaraahmad5618 8 หลายเดือนก่อน +1

    when is ac part 2 is coming?

  • @donaldmiller3064
    @donaldmiller3064 7 หลายเดือนก่อน +1

    Like your dog