Shine Supply " CHOP TOP " Boat Detailing Review | Boat Detailing Business Tips
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- In todays video we are going to review Shine Supply Chop Top Cutting Compound. We also explain how we booked $13,000 in boat details in one weekend! Shine Supply sent us some products because we were in a pinch, so This video is based on our first impressions of Shine Supply Chop Top Cutting Compound. Watch this video to take your Boat Detailing Business to the next level!
👉 We have used our boat detailing business back to Pensacola, FL
#boatdetailing #shinesupply #marinedetailing
** Timestamps **
00:00 Vlog
02:01 How We Booked $13,000 In Boat Details
06:30 CHOP TOP REVIEW
08:36 First Impressions
18:19 Shine Supply CHOP TOP Finial Thoughts
👉 Save 15% On ALL Shine Supply Marine Products
with our discount code ( DRAKE15 ) at checkout.
www.shinesupplymarine.com
📸 Follow Drake On Instagram
For Daily Tips and Tricks / drakes.detailing
👉 Book a boat detail with Drake!
Revival Marine Care
💻 www.revivalmarinecare.com
📞 (850) 713-8421
📍 Pensacola, FL . Orange Beach, AL
Shine Supply Chop Top
www.detailusupply.com/product...
Machines:
Makita Rotary amzn.to/37iJszK
Rupes Mille amzn.to/3uqCoKm
Pads:
White Wool Pad www.detailusupply.com/product...
Lake Country Force Orange www.detailedimage.com/wax.php...
Other Products I Recommend :
- Pressure Washer amzn.to/322yVpE
- Wash pole amzn.to/3EcscXL
- Soft Wash Brush amzn.to/31Tp6e5
- Lambs Wool amzn.to/3F2kujU
- Super Clean amzn.to/323A2Fx
- Water Hoes amzn.to/333K6MS
- Dawn amzn.to/3caqgB6
- Foam Cannon amzn.to/3J4SdKG
Camera Gear:
- Gopro 9 Used in This Video! amzn.to/39I3wdJ
- Camera Used in All My Videos! amzn.to/2WitD3b
- Microphone Used in All My Videos! amzn.to/37jYAu2
👉 Save 15% On ALL Shine Supply Marine Products
with our discount code ( DRAKE15 ) at checkout.
www.shinesupplymarine.com
👉 Book a boat detail with Drake!
Revival Marine Care
💻 www.revivalmarinecare.com
📞 (850) 713-8421
📍 Pensacola, FL . Orange Beach, AL - ยานยนต์และพาหนะ
I have been watching you on TH-cam from the very start.
Every single video that you have put out I have watched and will keep doing so You have taught me so much on top of what autobody has taught me. I'm absolutely killing it because of you!! And I just wanted to say thank you so so much.
Wow! Thank you so much! I really appreciate you watching the videos and supporting the channel!
Hey Drake,
You're absolutely killing it my man. Thank you for taking time out of your day to make these videos for us. I wanted to say it's really cool to see you replying to everyone's questions and comments on your videos. Not many people will respond and be active in the comment section of their videos. Thanks for taking the time to teach us. Keep up the good work player it'll pay off in the end.
Thank you! I appreciate you watching my videos and this comment!
Yo! I appreciate you my man!! I’m a Boat Detailer in Portland OR area and I have learned quite a few things from your videos during the winter on my off season. But Im excited to see you post your work your doing out west because it’s the kind of work I booked all the time. I would love to build a relationship with you if possible. God bless you for sharing your work with us and I’ll keep purchasing products through your channel.
Thanks for the kind words man! ❤️ Feel free to DM me on my Instagram @drakes.detailing
AMEN fellas!! keep it moving, and shinin'! You guys kill it every time! Love it!
Thanks! We appreciate it! 😎
The kid is back!! Glad you're back at it bro! Love your videos
Thank you!
excited to try out the Chop Top on our boat today!
Thanks for your hard work in creating this content, it's a huge help for anyone who wants to make their boat beautiful again.
Our pleasure! Best of luck!
Great work drake, love to see you making videos again!!
Thank you! It’s good to be back!
congratulations for your hard work keep working hard and the passion for you work 💪 👏
Thanks bro!
Great video, glad you are back to creating content.... keep it up
More content coming at ya 🔥🔥
Thank you for being specific , subscribed
Thanks bro!! 🔥😎💯 More content coming at ya!
Glad to see you back. I have been detailing in Reno Tahoe area for 20 years this July. I was struggling on some boats and turned to you tube and found your channel. I have been using Menzerna 400 Jescar Power Lock and the Mirka Abrolon sanding disc's for almost 2 years now. I'm interested to try out this new product and if I supports you and your family and your success I'm all in . Keep up the good work brother 🙏 God Bless Always enjoy your content!
Thanks for the kind word bro! Get you some Shine Supply! It’s 🔥🔥😎!!
Awesome videos my bruthas! Subscribed for sure!! Definitely buying a bottle I always wanted to try it!
How many man labor hours did you put into that project?
The entire boat about 14 hours
@@DrakesDetailing that's 28 hours of man labor with 2 guys! Nice hard work!.. good job my brutha!
Drake, those results are sick. Very well done.
🔥😎💯💪
Good to see you back at it Drake.
thanks bro 😎
Awesome brother!! 👍🏼👍🏼
😎
Great video!!!
Glad you liked it!
WOW! super happy seeing a pro working this magic! Question if I may please ... Would this product be good tp cut and polish kitchen stone benchtops too. You have well and truly inspired me to say the least :)
I personally never tried it, so I can’t really say one way or the other 🤷🏻
Boat looks great! Watching and learning from your videos has given me motivation and knowledge to detail my own boat this year. Question for you. How should I go about buffing over my vinyl pinstripes? Will a heavy cut compound and wool pad ruin them?
You can you the heavy cut compound and wool pad but just ease your pressure- go over them lightly
Works amazing on heavier oxidized gel coats if you through a couple dots of heavy cut in with it. Also typically don’t have to use a second polish step if you take there ceramic cleaner wax as protection and some polishing!
Thanks for the tip 😊
@@DrakesDetailing yeah their products are super versatile and doing combos with the products on pads can give some great results. I got advice from someone to not use their classic polish on gel coat though. They said it doesn’t like it but to inseam if needed use the burnout or their slick back primer polish.
Chop Top, Classic Cut, & Classic Polish are my go to’s for clear coat!
nice! I love these products🔥🔥
Love watching your vids, very helpful. I have a black 22' Cobalt and trying to buff inside the chrome COBALT letters. I can't get it looking good :(. Also, what do you suggest for buffing around the small deck hardware where full size pads can't get to. Thanks!
Your welcome! Glad I could help!
Phenomenal video man. I’ve learned a ton from your channel and super grateful for the knowledge you’ve shared. Would I be able to get this similar result with a DA and wool pad? Never touched a rotary so I’m definitely nervous to try it as I don’t want to damage anything or eat cost of repairs. My experience compounding is on cars with DA machines.
You won’t get the same results because a DA does not have nearly the cutting power that a rotary has. The rotary is made to cut away the oxidation I the gelcoat and the DA is only made to do light polishing after the main cutting steps have been done. However, if your boat is not oxidized at all then you can get away with just a quick polish and a seal with just the DA all day long.
Awesome 👌
😎💯🔥
Hey Drake, first thank you for all the awesome content, I really appreciate all the knowledge your spreading. My question for you is: I just buffed and polished the inside of my boat but I ran out of time to wash it out and apply a sealing coat, can I wait a few days to seal it? Is there any problem that may arise for waiting 3 days to seal?
Thank you, god bless and enjoy your Easter.
Hey man! It’s not a huge deal, just wipe the gelcoat down with before toy seal. Easter Blessings 🔥🔥😎
Great video as always. I boat on Lake Erie, Ohio. After using choptop what would you recommend for a finishing product for the elements of northern Ohio?
Nope, chop top should be all you’ll need
My man’s Drizzy DRAKE 💪🏻🫡
💯😎
Shine supply is the best
💪💯😎
Bro. Been using shine supply for almost 8 years now. It's the real deal. 🤟 question though, what have you found best for polishing behind the rub rail on these things?? Currently working on a summerset. Almost 100fter lol
I use the flex mini machine to do the hard to reach area’s
Thanks For the Video !! What Ceramic And How long Do you See Ceramic Lasting ? Not Bashing House Boats but the Gel on those are Not to Thick and the Lay up similar to a RV, So right on getting into Marina !!! Thats how I we met in Orange Beach....Great Job and Alway Enjoy your Videos along with Motivational and Instructional aspects Helping People.....Now just have to take the info and Put it to Use. Nothing in Life is Free and It takes hard work and Drive !
Thanks for watching 😉! Chop shops products are awesome!!! Check out their coating. Starke repel pro and liquid Thor is good too.
Just bought the chop topand Makita rotary for my white oxidized wellcraft, do you think the chop top followed by jescar sealant then collinite marine wax with a DA would be a good system? Thanks for all you do
Hey man! If you do Jescar , there is no need to do Collinite. Collinite is “real” natural wax, and it doesn’t last more than a few weeks. All you need is a polymer sealant like Jescar. It’s synthetic chemicals, not wax so it will last you way longer. Putting that Collinite wax will only hurt it’s effect.
Great video, can you use the rupes Millie with a micro pad to apply the jescar?
You sure can!
I bought a 01 Mariah z275 yellow boat with some heavy oxidation. My question is, it has some pretty deep cuts and nicks past clear coat and paint. Just a much of those small ones but they are deep. Can I still cut and buff like in your videos or do I need to fill those gouges first ?? And if so what do I use to fix or fill the cuts. Thanks and keep up great videos learning a ton from ya! A
Hey bro! I’d probably have the cuts filled and gelcoated, then just buff out the whole boat!
Sounds like Farecla G360 (use on cars). Cuts. Leave residue put s dot on a pad and finished out pretty nice. I might try a boat this yr here in Ontario Canada.
im gonna try farecla on boat this week any tip? maybe drake should try this and give a review :)
@@ericbond1605 if I do a boat this year it will be my first first! Check their vids on the cars. My buddy uses it at his body shop. I haven’t seen it used on s boat yet. But would love to know how it works out! Maybe check with the company via email and ask?
I’m always open to suggestions
🔥🔥🔥
Thanks 😊
Hey Drake, I have been watching all the videos and have compiled a list of supplies I need to do my boats. Early in watchin the videos I was guessing I would do a wet sand with Mirka 1k grit on the DA, then Ardex 600 on the rotary medium wool, followed by Menzerna 400 on the orange LC pad, and then Mezerna 2500 with the LC white as I have a darker color boat, finished off with the Jescar. I am not a detailer just an DIY'er, do you think I could get away with just using the Chop Top as you have described here? This video kind of made me question my stance on what to buy but if I only need the Chop top, and Jescar to get decent results I would go with it as I am not super picky just want a good finish boat to be proud of. Thanks, and keep the vid coming , I love your vids and your personal journey God Bless!
Hey bro! All good stuff, my question is how oxidized is the boat, that will help me give you a better idea on what to do
You are the best
Thanks bro! Haha 😊
greetings from Puerto Rico Many blessings God continue to open the door to success bless
I’m curious as to what size this boat was and thanks again for all your videos you are amazing
Thanks bro! I believe it was around 55ft
@@DrakesDetailing looks great. Thanks so much for your sharing
Sorry if this is a dumb question, but can you use this product and technique on rv/trailer oxidation too? Total newbie to the detailing game here. 🙋♀️
Yes, do the exact process!
House boats and campers are the same exterior finish
Hey bro! Casually can I use the chop top for a black hull for poolish? Is a black paint awl grip
Hey bro! Give it a try! Just do a little test spot
What’s the difference between shine supply heavy cut and chop top vs like starke level r and finish r?
Heavy cut by shine supply does not diminish, so it’s going to keep cutting. Stark level R will break down the more you rub it into the boat.
Hey Drake, glad to see you back at it! Are these products comparable to the previous products you used in the past (without naming names)?
Yes, honestly chop top was amazing.
Probably not as aggressive as level R, but it made the surface pop like crazy! Way more than level R ever could.
Hey Drake how does chop top pair up against Stark level R?
They aren’t necessarily comparable. Level R is a extra heavy cut, chop top would be more of a medium cut on a boat.
Chop top lands in between starke level R and starke elevate
Working on my first boat. Its kicking my butt physically. Hasn’t been Touched in 20 or so years. Heres my question. About how much product (compound/polish) did you use on a boat that size?
Probably at least a gallon or two of each product
So same product being used on your polisher aswell? That’s a DA? Or rotary? That your friend is using
The other machine is a Rupes Mille.
Yes, we use shine supply chop top for both steps.
is there a limit to how many time gel coat can be compounded before it takes away too much material?
Also, same question for motorhome exterior?
Thanks for the videos, Great to Binge watch LOL
Haha, thanks for watching! Gel coat is pretty thick. The oldest boat I’ve personally have ever done where the gelcoat had burned completely off was a 1974
@@DrakesDetailing OK thank you!
So does Starke level-R contain fillers? Also how would you compare this to level-r ? Level R says removes 600-800 sand grit & this one says up to 1500 so would level-R be a more aggressive compound?
Yes level R is more aggressive than chop top.
Chop top did great on this boat, but if your boat is more oxidized then you may need more of an aggressive compound
@@DrakesDetailing thanks brother appreciate the knowledge as always!
Would you chooses Chop Top for a heavy oxidized boat, or should we stick to Ardex or Level R?
Ardex is probably a little heavier, but Chop top is great for heavily oxidized boats
What pad and what machine are you using?
Orange Lake Country Pad on the Rupes Millie
Do you use any polish other than the Top Chop ?
I use a variety, Menzerna, Presta, Nautical One, and Starke is good also
How did you like the ceramic that you used from Shine Supply Co. ? I know your not using starke anymore but just curious how you liked this ceramic?
Honestly it was pretty awesome! Right up there with Starke, and possibly a little better!
@@DrakesDetailing awesome I’ll have to give it a try!
1st
Nice bro!
@@DrakesDetailing 👍
ok brother drake how do you buff wen on a trailer with rollers do I need to take off a roller at a time after buffing it what do I need to do brother drake can you please get back with me please please
Hey bro! I normally require the boat to be out of the water up on blocks at a Marina if I cannot buff the boat properly on the trailer
Man that stuff is expensive stuff I use is 60$ for a gallon
Quality is worth the price in my opinion 😎
Sooo whats the story behind the music with swearing? Haha
Don’t be blaring gangster rap for all the world to hear ha… it offends rich white women hahaha
@@DrakesDetailing lmao, keep the grind going. About to get my boat looking right. You think can coat would work well on a boat? I have some left over. Otherwise powerlock it is.
You should at least have a better light to check your work with 😅
Cell phone does just fine 💯💯
I’ve learned a lot from your early videos - thank you!
A year ago, you promoted Jesscar followed by promoting the Starke line. Then, you were off-line and took time out to pursue your faith. I support everyone’s faith journey 100%.
It’s okay to be honest & real. But then you pop back up 9 months later to tell us you disconnecting from Starke in a video that sounds like you both at fault.
You need to feed your family; makes sense. What happened to your faith journey? Don’t mess with Jesus. I guess it’s all good, but it looks more like you go with whoever give you the bread you need at the time because you never address the companies you swore by in the past. How can we trust your reviews? It’s okay to give an unbiased comparison but you don’t do that - believe me, we can connect the dots.
Don’t trust my videos… buy the products and try them for yourself! :)
Cynthia, just dont watch .......You should post some Videos of Your Work and Products that do a good job for you.
any other compound would make the same shine if not better. It’s all the same
Cool story bro! 🤘
@@DrakesDetailing it ain’t a story though that boat ain’t even in bad condition. Learn to take constructive criticism bud
You also talk way too much bro more working less talking