Build a Kit Car with ONLY a Drill, Pop Rivets, and Rattle Can Paint - Engine Power S2, E10
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2024
- Pat and Mike team up with Dupli-Color to build an old skool street rod with Factory Five Racing's '33 hot rod kit.
PARTS USED IN THIS EPISODE:
Design Engineering, Inc. (DEI): Heat Protection, Acoustic Insulation, Boom Mat, 12 1/2 in. x 24 in., Self-Adhesive, Set of 20
More Info: pntv.us/pn_pt_1831
Dupli-Color: Paint, Metallic Coating, Enamel, Textured, Silver Metallic, 11 oz., Aerosol, Each
More Info: pntv.us/pn_pt_1821
Dupli-Color: Paint, Spatter, Enamel, Textured, Black/Gray, 11 oz., Aerosol, Each
More Info: pntv.us/pn_pt_1819
Dupli-Color: Paint, Wheel, Acrylic Enamel, Satin, Black, 12 oz., Aerosol, Each
More Info: pntv.us/pn_pt_1827
Dupli-Color: Paint, Lacquer, Matte Clear Coat, 1qt., Each
More Info: pntv.us/pn_pt_1834
Dupli-Color: Paint, Paint Shop Finish, Lacquer, Gloss, Jet Black, 1 qt., Each
More Info: pntv.us/pn_pt_1833
Dupli-Color: VHT, Paint, Roll Bar, Epoxy, Satin, Black, 11 oz., Aerosol Spray Can, Each
More Info: pntv.us/pn_pt_1825
Dupli-Color: Primer, Paint Shop Finish, Lacquer, Flat, Gray, 1 qt., Each
More Info: pntv.us/pn_pt_1832
Dupli-Color: VHT, Paint, Flameproof Coating, High-Temperature, Satin, Clear, 11 oz., Aerosol Spray Can, Each
More Info: pntv.us/pn_pt_1824
Dupli-Color
Wax and Tar Remover, 11 oz., Each
pntv.us/pn_pt_1823
Stop Tech
Brake Pads, Street Perfomance, Aramid-Fiber Metallic, Set
pntv.us/pn_pt_1829
Stop Tech
Brake Pads, Street Perfomance, Aramid-Fiber Metallic, Set
pntv.us/pn_pt_1830
Dupli-Color
Paint, Brake Caliper Paint, Blue, 11 oz., Aerosol Cleaner, 8.5 oz. Brush-On Paint, Kit
Factory Five Racing,Inc.
The Factory Five "33 Hot Rod comes with all of the parts you need to build your car except for the engine, transmission, rear-end and paint. Complete kit, with optional 18" and 20" Salt Flat Wheels - Gray, with 245/40/R18 and 295/30/20 TOYO Tires
Loctite
598 Black, High Performance RTV Silicone Gasket Maker, 300 ml Cartridge
The Industrial Depot
Industrial Depot - Fasteners, Hardware, And Shop Supplies
WD-40
Aerosol, 12 oz., lubricant, water dispersant, penetrant, protectant - ยานยนต์และพาหนะ
We'll continue to post these episodes here on TH-cam. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/engine-power
Please don't
How do we enter to win this thing?
How do you title a kit like that ? TY,
You guys are high
I remember when I used to watch tv shows with these guys and others, the whole show was a commercial except when they had a break for a commercial.
A drill and a rivet gun and a lot of knowledge about car building as well as a full set of every tool.
I assembled one for a friend. I was very impressed with the quality of the kit. We added air conditioning, power windows, hard top, windshield wipers, remote start with alarm, remote entry ( no handles ), touch screen radio, cd, blue tooth, navigation with a back up camera, hidden LED backup lights, Rockford Fosgate amp, subs and high end speakers. Turned out so nice that l forget sometimes that l assembled it. Maybe someday I can assemble one for myself. Owner went with a 351 dressed up inside and out, TCI trans and 8.8 rear end. It will move.
Hello Arthur, would you assemble one for me as well. I'm willing to pay up
Don’t know how likely it is that you’ll see this, Arthur, but if you do, may I ask how long it took you to put this ride together? It sounds like a really neat ride, btw. I hope you get a chance to build one for yourself!
I think with an in depth how to step by step video would encourage more novice builders.
i really appreciate the depth you bring to your discussions.
It's hard to convince someone to use a rattle can on a car they spend $30k on.
I decent paint gun is not expensive, I think it has to do with Duplicolor being a sponsor.
I use a rattle can on my model t all the time...with a little bit of work, you can not tell where I used it...I do not sweat rock chips or scratches...
@@georgvonsauer2618 Teach me your ways, Great master. For I have a 67 Chevelle SS with 10 year old black paint.
Who said anything about money ? ? ?
They said build a car with a drill, pop rivet gun and rattle can paint. The title didn't say anything about needing Money ! !
I'M PISSED ! ! !
@@boomerisadog3899 dude it's not hard. But also depends how much work you wanna do. Learn about burying shit in clear coat like racing stripes and polishing and wet sanding.
how did you sand the excess fibre glass , and flash mould lines , was it with a pop rivet , or the drill ??
Wow... It is badass ! I would love to have it in my driveway !
Dupli-Color customer for life. Painted my rally car interior with the stuff
What a clean lookin build. Great job
I love the kit and I love the price, but I would have a roll bar put on it before I go out with it.
Kit comes with a roll bar but people leave it off. It bolts in or could be welded to the frame.
here in europe we can just dream about something like this... a kit car built in your driveway with a couple of buddies and a bunch of beers... enjoy your freedom fellas
Will do. Thanks 🍺
12:42 That wrench doesn't look like my drill or rivet gun or paint can. Which is it PowerNation?
Loved these as soon as they came out
I love this and I want to get one I'm sure I could build it no problem!
Very cool 😎🇺🇸 I wish we would of have had this when I was a kid.
ohh wow! Simple great build
Drill, rivet's, rattle can and about
30 THOUSAND DOLLARS😵
CARROS MARAVILHOSOS ,SENSACIONAL!!!
simple build..looks great
Good stuff!
Once i have ny new job this is my goal is to build one of these and make videos cruising my home state
Looks pretty good actually
18:41 Question - Aluminium to steel riveting, they are dissimilar metals and are subject to considerable galvanic corrosion being wet from rain, road grime (salted roads) and even humid hot days. Wouldn't the better choice have been zincanneal sheet and spot weld them to the frame THEN paint the frame?
It blew my mind when I saw them man handle that engine in at first. That's a nice plastic piece for mock up though.
I will totally take the car. Good looking job.
"Visibility is good" until the top goes on and you realize it's chopped, lol.
I once saw a guy change an automatic transmission with only one tool and it wasn't a drill, pop riveter, or a rattle can, it was a pair of Visegrips.
Love it!
Honestly. One day I'm going to build a kit car.
these kits are 20k no motor and trans and other parts missing.
@@StevesDIYProjects7 Thanks for the fun fact. But I'd still like to build a kit car one day, doesn't mean this exact one.
@@suckmysilencer747 id like to some day also.
Porsche 356 on a bug pan, with a turbo subaru boxer engine would be raw
Yeah that's awesome we love to have something like that lian-li pastime getting too old that is an awesome job we love your work love to watch you work
on such a wheelbarrow to dissect just a pleasure like bro
thats sweet ride
Plus I'll take anything those two build! 😁😁😁😁
300 HP go cart, fun to dream about, looks coo, fun to drive around the block but will wear you out after 50 miles.
Not true if you go with the hard top.
I dream of one of those 33s,with a hot slant six and some tall narrow steel wheels,
I'd find a 85 mustang donor with a carbureted roller top 302 and a 5 speed manual, light weight 225 hp stock and 300-6 with overdrive gas mileage until you stomp on it.
@@goober3463 those are rare now,but there are a lot of crown,vics out there
Dream bigger and lose the 6
@@trentdawg2832 making oddball stuff fast is the point
+Ronald Harris The Slant 6 isn't an oddball. It's a pretty generic old inline 6 engine.
This looks like something I need to start saving money for, it'll give me something to shoot for as well as be able to say I built my own car, you wouldn't even need a big motor for a car that size and weight
American hot rodder culture is great.🥝🇳🇿😊
COISA LINDA DE SE VER ,LINDO,LINDO,LINDO!!!
Best TV ever........ :) LoveNation
Молодцы. очень интересное занятие. классные машинки
I thought I was going to see a cool build video. Turns out this is just an 18 minute long commercial. DO BETTER.
That is every episode of the show. It is all product placement and advertising.
same is true with their tv shows
@@1RAYGC DuPliColoR!
I laughed out loud at the driver switch. Haha.
good video so easy to build that car
I love and completely agree with your list. The last quality of a Sense of Humor is my most important one as well, but unfortunately in my almost 46 years I have yet to meet someone that could match my sense of humor. I do look forward to that.
That would be one bad ass ride to win.
Thank you.
Muchas Felicidades Joven Por Su Canal
How long does it take to build
In case I was the last to know, open wheels are NOT legal in America. You MUST have fenders of a sort that prevents rocks and other debris from being thrown by the tire tread. FMCSR part 387. Thanks, JD
@Abe Adams you’re wrong. The Plymouth Prowler does have fenders in the rear and front of the vehicle. They may be small but they are there. Any vehicle without fenders is considered illegal to be driven on public roads. Although you may own one without fenders and have it in your personal collection.
LoL it's badassss, would look incredible in that malibu candy metallic blue with tan leather
A lot of people complaining about using 3 extra wrenches to build it. Finish work is up to you if you want to rattle can or put it in a booth..hell make it a rat rod.Its complete enough for me to do in my garage. Supercharged LS engine would be nice, reliable and fast as hell!
Hi Bro nice project.Very very nice:Colour,power engineers.❤
You guys always find a way to disappoint me 🤦🏽♂️🧐😳🥺
This makes me so happy MERICA🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
That's it i'm buying one!
Oh how i wish i could have one of these. But no point in building something i can fit in. @ 6'8" tall id never fit. But oh how pretty.
Nice Duplicolor commercial boys.
Now someone make a 3-row dad wagon kit.
Love it :D
Cool!
This is sweet
Yep... I want one!
CAR BEAUTIFUL
This is way cool very light
Man I am just drooling to see a hopped up straight six and a manual in that. (Intake stacks on one side, pipes on the other side). A Jeep 4liter or old Dodge Slant... wait. Both of those have exhaust and intake same side. Well... still way cooler than a generic small block v8.
Cool! Kind of a ZZ Top car!
Well it looks like Pats shirt pocket survived another episode!
I doubt Shakespeare carried that many pens during the peak of his career.
YOYO MA
We should all be thankful that Pat hasn't yet taken to wearing a codpiece & let's just hope he doesn't try to get a quill & ink bottle into that pocket!
Love it it looks fantastic I want one of these I can’t wait to see the rest of the build Larry in London
Ever Price a Factory 5 kit car ?
You need about $30 ,000 just to get started .
I would use a Lincoln mark Viii For the Donor car but still it would cost around $25,000.
for that much money you could just buy a used HO mustang or dodge hellcat .
345 HP for a $10,000 Motor is no bargain .
You have 20 Guys and a $200, 000 dollar shop and I could slam one out too !
In terms of bang for your buck, its hard to beat an LS crate motor, especially ones built by third parties - for roughly that same 10, you can buy a 625hp, 427 ls motor from Summit.
@@machinist7230 id just get a 6.2 with 700hp for the 10
I like the rims.
This is a cool ad ngl
4 years latter- A real benefit of these kits is the possibility of a very cheap and practical A to B vehicles by going the low hp route, AKA some of the light vehicles out of the UK using motor cycle engines.
Being built for larger engines may give them a large safety buffer over the lighter vehicles when smaller engines are fitted.
Man I want one
btw i would give anything to get a car like this. I love working on things, and this would take it to another level!
:)
if you have 40-$50,000 you are all set!!
Mass air sensor is mounted upside down, must be a cheaper one and had to clock it to get decent idle and running characteristics
I finally figured it out Pat is the James may of America
i need one of these like i need a hole in my head, but i want one
outstanding!!!
I soooo need one of these
426 hellephant crate engine👍🏾
Aston Martin is made the same idea.. using a space age glue between the panels and rivets.. the car is light and stiff at the same time..
Truly amazing! Are your kits available in Canada?
Wow. All i need is a rivet thingy and a crecent wrench and visegrips..
That build book was thicker then the Bible lol
when i seen them carry the plastic motor i was like damm there strong . 15:26
Bro I do that crap Everytime.
Motor looks amazing & easily moved 🤓👍🏽
I love the look of some of those but I just can't help but wonder if in an accident they'd fold up like a paper plane.
It has a really rigid frame it'll be alright plus this is no daily car
Yes I buy kit cars for safety
This is a great video, f the haters. I'd build one with a hot import inline-6.
Just a note for the diy crowd, even if it says no primer needed, use primer.
I've never thought no fenders a good idea. You might as well just paint with primer, because at least where I live, you'll be dealing with stone chips all the time.
Car is so modern it doesn't need fuel lines brake lines or an electrical system. Truly amazing.
I want one....😎
I'm ready to win this car, its nice
2:10 salesman’s fail. You’re not supposed to LOOK like you’re selling something.
I would drive it like Pat nice and slow.
I wonder if you could squeeze in a Ford Triton V-8 or Triton V-10? That would be overkill, but there's no replacement for displacement!
Awesome informational educational video experience Y'alls God Bless Ya 🙏
I would love just to cruise
I am building one with a weekly vlog on TH-cam right now and it is definitely not just Drill, Pop Rivets And Rattle Can. I love PowerNation but this title is a little far fetched. My channel shows the real trials and tribulations. But it is fun! LOL!
Шикарный Хот-Род, почему сейчас, когда есть электро мотоциклы , на мотор колесах, ни кто не делает Хот-Род на электрических мотор-колесах???❤😢😅
My wife would look hot driving this... Would probably get a a 3L 400hp diesel powerplant in the future ☺️