Hey everyone! I hope you like the video. The soldering parts have been left intentionally long because I wanted to be convey the full experience. Thanks for watching. :)
STS Telecom how much would you charge to replace a nand on a iPhone X or just replace the logic board? I just got a iPhone X in that I ordered off of eBay and it is iCloud locked and I guess flagged by Verizon!!! I’m out 400$ now and just have a very nice paper weight! So I would like to get it fixed and working! I have fixed a bunch of iPhones but I don’t have the tools or skills to micro solder let alone know what I’m doing replacing chips on the board! If I change the board with one that’s not iCloud locked it should fire right up right? I love your videos man! Your a beast at what you do!
I like the way you do the job for your clients. It looks very professional and you pay a lot of attention to details which is fantastic. I really admire your work. Keep up the pro way!
Appreciate the longer form video. It gives one the total amount of time required to effect the 2 processes. I think what would be useful if there were additional pins that you could screw down or simply friction fit over the existing pins when realigning the boards during reassembly two align the two halves. During disassembly these additional guiding pins are not used and can be removed so that the 2 halves of the board can be flipped apart ideally.
I think the jig needs removable alignment pins. I would want to be able to align the two boards, but then remove or retract the pins so that the top board can "self correct" when it begins to float.
Hi. I think this jig to assemble this pcb together must have longer pins also they should have thread in and a little screws with soft springs attached to it ,to push top board down when solder is melted. This should help a lot. Anyway great video.
Great video. You should try contacting the original owner and ask him to remove the iCloud lock to this board, I believe that you can see the full e-mail address as the phone is not yet locked or wiped.
I love your videos, I enjoy watching you are humble person, the wey you explain things is so beautiful, but I have a recommendation for you! You have I socket which costs around 200$ but you are reballing you motherboard with iron solder and not buying 3$ BGA reballing stencil, It was pain watching you reballing like that. I love your videos man, Much love form Kosovo 👌
Sometimes it's difficult to leave stuff like this online.. lol :-) Was indeed some of my very first sandwich attempts. Thank you for watching & commenting!
The deflection you're seeing in the board is likely just the result of the bottom being warmer than the top side. If so, the trick is to make sure the entire board is the same temp, especially when the solder solidifies. Maybe make a small insulated box/ cover to set the board in as it is heating and cooling?
28:38 The "joining board" is called the "Interposer" board...learned that the other day. ;) Great vids BTW, really loving your content. You're really easy to follow.
Lmao hahahaha loved the beavis and but head reference. Hahahaha hahahaha 🤣 awesome. I have so much fun practicing rework, I crack myself up with all of the tid bits and nonsense I might spout off. Thanks Jason, always enjoy your videos and humor. Hope you are doing well.
Oh my, that test thingy is neat. Seen a dozen of your vids, great skill I'd say. Still wonering why you wear gloves. Many times I see you toching your hair, mouth, scrats with the gloves. :) Interesting btw that low melt sodder... maybe added Indium? I'm gonna check that out.
Please from where to get that cable to power the phone? I want to get more productive in this business and I guess these can be bought for various model...
I have not done this, but just thinking.. If you put a screw in the hole next to the apple logo, it will be easier to lift it vertically by holding the screw with tweezers or else, without damage the solder balls.
Hi Jason, I just got the same preheater and I want to know the exact time to separate the board since you turn it on, and the exact time it takes to put them together???
Grande video !!potresti mettere i link per sapere dove acquistare il preriscaldatore e tutti gli utensili per lavorare su iPhone 10?grazie!saluti dall’Italia!
Yes but sometime after I recorded this video, I learned that there are tiny spacers between the board sections. I carelessly wisk them away in this video. :-O I really need to make a new video. Every since I learned about the spacers, I try to make certain not to disturb the factory alloy when separating the board. This makes it extremely easy to sandwich back together & retains the factory spacers that keep solder from squeezing out when pressure is applied.
I saw the writing on the plate and ran it through google translate and the writing on that plate says " No Middle Frame Test Gasket" . Might be worth giving a try on the next iphone X
Tim Cook to iphone engineer:" Since we can't stop 3rd party repair shop from working on our products, is there a way we can just make them go crazy/" Engineer:" How about 500 solder balls and leaded solder that makes everything float if you just look at it?"
Woah.. I never noticed that my link was to the 220v version. It doesn't look like they have a 120V model. Odd.. The one I am using was donated so I never even gave it any thought.
Hey jeson i wanted to take your advice ,i am beginner to iphone repairing and there is fonekong team coming from china for advance course in coming march should i take this chance its only for 7 days .. will it help me in my future ? please advice me
HI DEAR SIR , ON IPHONE 6S WITHOUT REMOVING BATTERY I TRY TO CONNECT THE DISPLAY SUDDENLY I FEEL SOME SMELL AND I DISCONNECTED , IS THERE ANY SOLUTION TO FIX THIS ? EXPECTING & THANKING U
![[LIVE] : ONE ลุมพินี 84 วันนี้!! คู่เอก "ก้องศึก vs เมืองไทย"](http://i.ytimg.com/vi/3kuzsAIDf1c/mqdefault.jpg)
Thank you 🙏 for this amazing video
Thank u for the very useful tool. 👍
Any contact no. Please
sana all merong tools
Hey everyone! I hope you like the video. The soldering parts have been left intentionally long because I wanted to be convey the full experience.
Thanks for watching. :)
STS Telecom how much would you charge to replace a nand on a iPhone X or just replace the logic board? I just got a iPhone X in that I ordered off of eBay and it is iCloud locked and I guess flagged by Verizon!!! I’m out 400$ now and just have a very nice paper weight! So I would like to get it fixed and working! I have fixed a bunch of iPhones but I don’t have the tools or skills to micro solder let alone know what I’m doing replacing chips on the board! If I change the board with one that’s not iCloud locked it should fire right up right? I love your videos man! Your a beast at what you do!
Nice Balls dude, thanks for sharing man
@@ryanfountain3733 by moo by Xb use, c
I like the way you do the job for your clients. It looks very professional and you pay a lot of attention to details which is fantastic. I really admire your work. Keep up the pro way!
This was a great video to show case the various tools you're using these days to repair/salvage iPhones.
You really got me going for few secondes about the microwave. 👍🏼
I really appreciate this video!!! We were sent an X, and the top is a Pringle. This video might help us solve how to rebind the two boards!
Im learning and having fun at same time !!!
Spheres, got to love them. Just looks so nice when they form in the flux.
Appreciate the longer form video. It gives one the total amount of time required to effect the 2 processes. I think what would be useful if there were additional pins that you could screw down or simply friction fit over the existing pins when realigning the boards during reassembly two align the two halves. During disassembly these additional guiding pins are not used and can be removed so that the 2 halves of the board can be flipped apart ideally.
Pop corn iPhone X, very good job 👏👏👏🙌
I think the jig needs removable alignment pins. I would want to be able to align the two boards, but then remove or retract the pins so that the top board can "self correct" when it begins to float.
Hi. I think this jig to assemble this pcb together must have longer pins also they should have thread in and a little screws with soft springs attached to it ,to push top board down when solder is melted. This should help a lot. Anyway great video.
Great video. You should try contacting the original owner and ask him to remove the iCloud lock to this board, I believe that you can see the full e-mail address as the phone is not yet locked or wiped.
Very good video
Best explanation ever!
I love your videos, I enjoy watching you are humble person, the wey you explain things is so beautiful, but I have a recommendation for you!
You have I socket which costs around 200$ but you are reballing you motherboard with iron solder and not buying 3$ BGA reballing stencil, It was pain watching you reballing like that.
I love your videos man,
Much love form Kosovo 👌
Sometimes it's difficult to leave stuff like this online.. lol :-) Was indeed some of my very first sandwich attempts. Thank you for watching & commenting!
YOU GOT ME IN THE FIRST PART *CRYING EMOJI*
The deflection you're seeing in the board is likely just the result of the bottom being warmer than the top side. If so, the trick is to make sure the entire board is the same temp, especially when the solder solidifies. Maybe make a small insulated box/ cover to set the board in as it is heating and cooling?
28:38 The "joining board" is called the "Interposer" board...learned that the other day. ;) Great vids BTW, really loving your content. You're really easy to follow.
If I would have designed the IX5, I would have made those pins so they screw out to catch both boards. Great Videos!
Very nice video ))) hello from Russia !
Nice tools ,I'm glad you didn't destroy your microwave
Thanks, but it wasn't the fireball that I had hoped for.
Jason, you should go to that one Chinese electronics market in China and go on a big shopping spree! You'd find really useful tools for really cheap!
Sir u r great we love u r work
Sir we are waiting for basic electronic videos thanks
New solder tool come iphone x .mindblowing heat tool .iphone x seprate and together perpouse
👍👍👍👍👍👍
Hey I’ve been really enjoying your videos I really want to do this after college getting into micro soldering and fixing iPhones
Would love to know how many ball utterances there were in this video. Needless to say, I love it when you explain the intricacies of ball size.
To be honest you blew my mind
i love you bro and I love your videos
Lmao hahahaha loved the beavis and but head reference. Hahahaha hahahaha 🤣 awesome. I have so much fun practicing rework, I crack myself up with all of the tid bits and nonsense I might spout off. Thanks Jason, always enjoy your videos and humor. Hope you are doing well.
Lol, thank you! So much has changed since this video.
You got me with the microwave LOL, thanks for your videos, i am restructuring my shop with them
Another great vid Jason
maybe you can make some extra pins and put these in the holes that are not used by the board holder ?
Jason I LOVE YOUR VIDEOS!!!!!!!!!!!!!!!!!!
Thank you Jason
Oh my, that test thingy is neat. Seen a dozen of your vids, great skill I'd say. Still wonering why you wear gloves. Many times I see you toching your hair, mouth, scrats with the gloves. :) Interesting btw that low melt sodder... maybe added Indium? I'm gonna check that out.
Very well, thank you
There must be something I'm missing. If you want to use the pins to align the boards, why did you put the spacer back?
Great thanks Jason , great vidio , I got get those tools too , when I can afford them
Beautiful video 👍👍👍
It seems kind strange now that you change the camera angle ( for better )
We were used to the old one.
Anyway, keep up the good work!
Love to see your work
Fantastic! Thanks. Waiting for more
Please from where to get that cable to power the phone? I want to get more productive in this business and I guess these can be bought for various model...
Really nice video! Thank you!
Nice! As always, very informative.
I have not done this, but just thinking.. If you put a screw in the hole next to the apple logo, it will be easier to lift it vertically by holding the screw with tweezers or else, without damage the solder balls.
Thank you work successfully
You should wick and clean one board and dome balls the other board then heat link them together for 100% link and no bridges
👌
Excellent video thanks J 👍 George/ Uk
Interesting video.. its give me idea to start doing X and above..
After 3 years still doing it this way?
thanks for your videos...you helps me alot.... i adore you...
When aligning the balls wouldn't it help if you ran some fine-sized pins through the screw holes? Love your videos btw!
Hi Jason, I just got the same preheater and I want to know the exact time to separate the board since you turn it on, and the exact time it takes to put them together???
good work...
that was AMAZING///////////////////////////
do you use a small fan to push the smoke away from your face
Thank you
Grande video !!potresti mettere i link per sapere dove acquistare il preriscaldatore e tutti gli utensili per lavorare su iPhone 10?grazie!saluti dall’Italia!
Nice dude love your work and yours video,s 💪🏻
Your are Funny to Whey you do video,s 😆
Keep up the work 😎 greating from netherland
Just Out of curiosity coulndt you instead of going with the iron on al the pads Just remove the solder with wick and reball with a stencill ?
Yes but sometime after I recorded this video, I learned that there are tiny spacers between the board sections. I carelessly wisk them away in this video. :-O I really need to make a new video. Every since I learned about the spacers, I try to make certain not to disturb the factory alloy when separating the board. This makes it extremely easy to sandwich back together & retains the factory spacers that keep solder from squeezing out when pressure is applied.
could you possibly use the iSocket with the spacer plate and leave out the connector plate to put the board back together with hot air maybe?
Yes, I believe that would work.
I saw the writing on the plate and ran it through google translate and the writing on that plate says " No Middle Frame Test Gasket" . Might be worth giving a try on the next iphone X
Me and Alex have been calling it a riser.
Tim Cook to iphone engineer:" Since we can't stop 3rd party repair shop from working on our products, is there a way we can just make them go crazy/" Engineer:" How about 500 solder balls and leaded solder that makes everything float if you just look at it?"
Good Luck
Thanks for the video bro
And what is the melting point of your solder??? Is it 138??? Or more??
Did you use solder paste or same that was in the board. Thank you and great work
Master
Great Video... what do you do about the thermal compund after the ultra sonic cleaning? Do you replace it?
heya oh wouw 1st time seeing a i10 pcb like that
Hey! Your board heater says 220V. 😟😕🥺 I don’t know about you down there but here we do not have 220 outlets. Only for the oven and dryer
Woah.. I never noticed that my link was to the 220v version. It doesn't look like they have a 120V model. Odd.. The one I am using was donated so I never even gave it any thought.
You are great...
I have an IPhone 11 Logic Board that has a couple spotys of damage. But mostly good. Lots of Caps etc. If you want that board, just let me know.
Tbh it would be funny Geting the info, finding who it previously belonged to and be like “here’s your iPhone X motherboard, the rest of the phone idk.
Where do I buy all these tools
"About 2 minutes later"
Ad starts playing
Cornholio! 😂🤣😂 you making excellent job with those videos, micro soldering and ofc beavis and butthead impression 16:06
Please can you activate subtitles in your TH-cam menu so that your subtitled video comes out? Thank you champion I really like your videos
Hey jeson
i wanted to take your advice ,i am beginner to iphone repairing and there is fonekong team coming from china for advance course in coming march should i take this chance its only for 7 days ..
will it help me in my future ?
please advice me
Hi :). You can see REWA Technology tools they use. And thanks for great videos.
hi bro. iphone8plus both camera not working .any solution please..
this is the time ive heard so many balls in one video
I loved it 😘😘😘😘😘
33:21 Forgot to FaceTime Bre Bre!!!!! :O
Oh!! I almost forgot! Call back Jacorin! 49:15
Beavis & Butthead laugh @ 16:07 👍😎
What capture card are you using for this? Thats the one tool you left out! Lol
Congratulation for your effort , from Romania . Apple seems to catch up with Research in Motion Limited ,after 5 years. Eh!
Хороший мастер!!!
Whitch desoldering wick did you use?
Don’t you be complaining. I never even thought about doing this. I’ve been putting down .25 by hand no stencil.
Why aren't you using a stencil?
what if on the i-socket hook up the extension and power, flip it upside down then attach screen?
were can i buy the mehanic for separating the board of iphone x thank you
Do you use an exhaust fan? Seems like you are breathing in fumes
Maybe he has magic microwave owen that fixes boards he just pretends to fix them on camera. ;)
HI DEAR SIR , ON IPHONE 6S WITHOUT REMOVING BATTERY I TRY TO CONNECT THE DISPLAY SUDDENLY I FEEL SOME SMELL AND I DISCONNECTED , IS THERE ANY SOLUTION TO FIX THIS ? EXPECTING & THANKING U
Check the backlight filter, is probably blown up
Shouldn't those solder balls be only on one of those boards being connected
What do you use in your sonic cleaner for cleaner?
Branson EC electronics cleaner in distilled water. Solution is 3% - it's really concentrated stuff!
which flex its good
roly