WPL 1/16 2-Speed Gear Box for B1 B24 B16 C24
ฝัง
- เผยแพร่เมื่อ 6 ก.ค. 2018
- This is the genuine 2-Speed Gear Box for the WPL 1/16 trucks.
Available at banggood:
goo.gl/VXUBx9
Get 8% off coupon on Banggood APP
banggood.app.link/9xgMkcIQzN
This set includes:
* servo
* 370 motor
" 2-speed gearbox
Music:
Title: Lost within
Author: A Himitsu
Year: 2014
Source: / a-himitsu-lost-within
License: creativecommons.org/licenses/... - ยานยนต์และพาหนะ
Good job, thanks for showing!
Thanks for showing us this :-)
Big heavy duty gears !
This video is very cool !!!
Good video bro
That was the video I needed to see! Thankyou.
So in order to run the two speed box I have to upgrade my controller and receiver also?
Hi thanks for showing inside of the gearbox, do we have grease the gear ?
Hi, do you know the current (mA) consumption of this motor at high speed ? thanks
Don which do you think is better the two speed diff in ur video or the big aluminum three gear diff
Nice video! What battery should I use with the 2 speed gearbox? Using a 30A esc with jst plug.
Can i use 180 or 370 motor with Standart Esc?
Can this gearbox support the Heng Long 1/16 Tank motor or is it too small?, because I get no answer anywhere else and I'm looking for a motor with speed and torque.
Can you tell what ( by proximaty ) the ratio is between the 2 speeds?
whether the first gear is stronger than the transmission in a standard box?
What is that button on the radio called?
Do you upgrade the battery to?
it does need more grease in there
Do you have to buy different driveshafts? I got one of these but all videos show a different style drive shaft than stock.
A lot of folks upgrade the drive shafts to the metal upgrade parts that are sold on ebay, bangood, etc. I'm awaiting delivery of mine- the plastic ones bind and pop and strip out easily.
What is the remote control called? And you just have to do that as in the video or do you have to do something else?
Looks like a FlySky FS-GT3C. 3rd channel is just on/off, so the placement of the connector between the shifting servo and the gear selector shaft has to be set, but that's quick and easy
I just use a 2speed gearbox to my c24, but when i press the throttle it goes on reverse intead of going forward. is that normal in 2speed?
No. You need to change + and - on the motor
My Speedbox its diferent not shippen the arms with servo
I think you have to add your voice to quickly grow your channel
Che telecomando usi ?
Can i replace the motor with brushless with the same diameter?
Yes, it should work.
how to control the lights if the gearbox goe to the 3rd channel? tnx
He isn't using the original radio
+Filipe Santos thanks,
Is there an angle limit on servo?
It's a - 45/0/+45 degree servo
Nice video but I hate the plastic gear Box,because mine b36 broken it's so much power of motor 180 or 370
Here is finally our solution: www.banggood.com/URUAV-WPL-1Set-Original-Metal-Gears-For-Speed-Change-Gear-Box-B1-B24-B16-B36-C24-116-4WD-6WD-Rc-Car-p-1464398.html?rmmds=myorder&cur_warehouse=CN
is lower speed reduction or add faster speed than original?
Both! The first gear is slower and the second is faster.
I had problems with this engine, the front tires go backwards and the rear tires go forward. I do not know if my remote control will be unconfigured. Does anyone know a solution?
Maybe wrong installation of the axle gears?
turn one of the axle housings around 180*
Show,,,,,,,,,
Dont change gear in full speed man.. Easy to strip the gears then..
You need to talk
Gear for plastic..
Show,,,,,,,,,,