To get a full proportional steering i need a new servo or just go with stock servo but with the 3 Channel radio that Comes with the 2 speed kit ? Thanks in advance !
elia onnembo If you have a newer ready to run WPL’s if should be proportional. If not you will need to get a WPl servo. The model in the video does not come with any electronics except the motor and servo.
can you make a set of 1\16 scale rims that looks like the original aluminum rims for a 87 toyota truck? please. i have looked every where and nothing even close.
Wow, really great. I just purchased one today and I would like to know what do you think about the metal axle , there a kit for this 6x6 with a middle axle with a shaft end for the second differential thanks for responding! Superb video btw!
Sorprendente conversión. Buen ingenio para poner doble llanta. En lo personal tengo 4 proyectos personales Wpl y gracias a ud los he desarrollado (mods). Agradezco ver su canal.
Is there a way to make dual tire rims without a 3D printer becuz I jus did a mod on my wpl B-1and I wud like to make it a dually can u give me some advice
Sure man the old school way just buy a section of pvc pipe with the pipes outer diameter the same size as the diameter of the flat on the rim. Cut the pipe glue the two rims together and done. 1/10 scalers on a budget have done this for years
nice rim job (yes that was an X rated pun, oops). I'm liking black automotive silicone for mounting these tires, sticks good and gives plenty of time to set them nice and straight, can also be peeled off and rubbed off clean. QX4 foam inserts are about the right size to copy with a little softer foam for the WPL soft tires too.
Nice truck for sure but two things ... First why dont you cut and sand it before start painting ??? Second ... Hmm you still forget to glue the tires, don't you 😅
Potato Approved!! Question! What type of battery do you use to power that esc? Can ou recommend a battery type and or charger that is not too expensive? I have spend a ton on these things and am about tapped out financially. Thank you!
Man o man that is so awesome, I love the the wheels and bumper is really nice, o wish I could get a set of those wheels it would bring my building to the next level.
grandprismatic thanks a lot. Was for me to compare this build with the 1/10, that I’m really enjoying. But this one have a lot more fans than the 1/10.
K/D The Kill Death Ratio so far I don’t sell them because I’m trying to lower the prices of the prints, after that I will start to share links on my videos too
Primeiro, parabens por todos os videos que sigo cada vez com mais interesse. pergunta, isso é na chamusca ou perto da Chamusca? Abraço e continua com os projectos sempre interessantes!
È UN CAPOLAVORO! !!!...che gran lavoro ..ben fatto !!! Stavo guardando TH-cam e mi son detto "questo è sicuramente un lavoro di Gongalo"...grande idea di fare le ruote gemellate e il trailer è magnifico!...fai sempre delle novità con la stampante 3d...vorrei imparare ad usarla anche io! COMPLIMENTI Gongalo!!!!👍 Ciao mitico!!!!...al prossimo video! !!
Yes it would be good, I wanted to build a 1/6 (the M35A2 Kaiser Jeep) for my figures on the basis of Traction Hobby . I might see this winter 😊 Continue your good work, always a pleasure to watch you 👍👍
I'm thinking of starting this new project in September, it's going to be a very fun build . Yes, I am from France, I go to Spain several times but never to Portugal 😊
I’m thinking about buying first 1:16 and wpl seams to be the one. And maybe convert it to a gun truck. Awesome video.
Beatiful place, impressive work Gonçalo.
Valdir Alves thanks a lot, would be perfect if it have some rocks.
Good video job my friend 👍
I need one lol. Cool build. What speed controller are you using? How dose the two speed trans hold up? Thanks for the video
To get a full proportional steering i need a new servo or just go with stock servo but with the 3 Channel radio that Comes with the 2 speed kit ? Thanks in advance !
elia onnembo If you have a newer ready to run WPL’s if should be proportional. If not you will need to get a WPl servo. The model in the video does not come with any electronics except the motor and servo.
How would you go about doing a dually build. Just buy an extra set of wheels/tires and glue the wheels together?
Great Job, nice vid
Nice video but we're did you get the trailer is it 3D printed
Nice run....I've put foams in my kit tyres and glued them...stops them coming off the rim all the time. 👍
Tomley RC Garage good idea bro
Tomley RC Garage yep, it’s what I do to, but that one pop off for the video
That's frigg'n awesome.
Sweet truck.
What 3D printer model do you use?
can you make a set of 1\16 scale rims that looks like the original aluminum rims for a 87 toyota truck? please. i have looked every where and nothing even close.
FICOU MUITO BOM 👍👍 🇧🇷
Wow, really great. I just purchased one today and I would like to know what do you think about the metal axle , there a kit for this 6x6 with a middle axle with a shaft end for the second differential thanks for responding! Superb video btw!
My 2 speed didn't come with that connection you have, mine came with some servon horns that don't work well at all 😑
Sorprendente conversión. Buen ingenio para poner doble llanta. En lo personal tengo 4 proyectos personales Wpl y gracias a ud los he desarrollado (mods). Agradezco ver su canal.
Panza de Vibora RC huge thanks for the super support
Awesome my friend been thinking about doing a double wheel conversion but looking for the World War II wheels slightly thinner👍😊👍😎✌👌
Leon's lockpad with this tire it becomes a beast.hehehe
How can i have like that rim psl... i want my truck to be double tire also at the back.
I love those wheels..I need a white set for a possible fire truck build !
Nice Video. Whats the Name of the First Song ?
Just needs some printed rear wheel fenders for the bed and it's set.
Is there a way to make dual tire rims without a 3D printer becuz I jus did a mod on my wpl B-1and I wud like to make it a dually can u give me some advice
I gess you could glue two rims with some face bead cutting. That's only an idea, never did it
Glow the tyres together! :-)
Sure man the old school way just buy a section of pvc pipe with the pipes outer diameter the same size as the diameter of the flat on the rim. Cut the pipe glue the two rims together and done. 1/10 scalers on a budget have done this for years
That’s alot you bought mate!
just wltoys 124302 to pull the head
Do you sell those dually rims? If so how much?
LIKE THE WAY YOU FIXING RC TRUCK 🚛
nice rim job (yes that was an X rated pun, oops). I'm liking black automotive silicone for mounting these tires, sticks good and gives plenty of time to set them nice and straight, can also be peeled off and rubbed off clean. QX4 foam inserts are about the right size to copy with a little softer foam for the WPL soft tires too.
Where can i get those dually wheels
Pitbull rock beasts 👍👍
Any idea for a oil filled shock for the c24 or c14
Andrew Kauffmann nop, só far I haven’t try any one
Goncalo Quinas ok thanks I have a c14 and am upgrading the axles and driveshafts
I tried that I didn’t have a screw long enough to go through both rims
Go to Banggood website and you will find all the parts for wpl 1/16 parts,steel or plastic axle,drive shaft,rims and suspension...all available there
I need those 3d printed dually wheels and the fronts. Trailer too .great video thanks for sharing
FAF🤣
Nice truck for sure but two things ...
First why dont you cut and sand it before start painting ???
Second ... Hmm you still forget to glue the tires, don't you 😅
Look at your work and studio u deserve 1 million subscribers fantastic video man
Love the truck man. Great video. Ok no joke how much you charge for a set of those printed rims
Potato Approved!!
Question!
What type of battery do you use to power that esc?
Can ou recommend a battery type and or charger that is not too expensive?
I have spend a ton on these things and am about tapped out financially. Thank you!
doyou sell the dual wheels?
Fantastic, Amazing build , you have done a fantastic job, great vid my friend 😄😀😄
OMG nothing else
You make it look so easy
Congratulations - what a wonderful build!
Del350K4 thanks and this one sure like it a lot
Man o man that is so awesome, I love the the wheels and bumper is really nice, o wish I could get a set of those wheels it would bring my building to the next level.
Great build friend. I'm trying to figure out read axles tonight
sell?
what color is that?? (silver - white - black) OR (silver - matt white - matt black) ???
The second opinion. And all mate the paint except for the silver
okay.. thank you, I will painting my truck just like what you did 😁😋
you are most proffesional doing this rc videos your great inspiration thank you with love from Ibiza
Nice build,i am also getting those parts,but,i am building something entirely different and unique
🤩👍
What kind of transmitter receiver and speed control I need to make this all work? Great video by the way... keep up the good work
Awesome videos...
Love your work and creative ideas man...
Absolutely fantastic...👍😊
Very nice work, turned out really well!
grandprismatic thanks a lot. Was for me to compare this build with the 1/10, that I’m really enjoying. But this one have a lot more fans than the 1/10.
What batteries do you use in your trucks li-ion or lipo?
Andrew Miller in this video, he uses a 1000mah 2s lipo 7.4v.
Круто
Excellent!! You have the talent of God, the "golden hands" is just a terrific sight !!!!!!! 😉👏👏👏👏👏👏👏👍👍👍👍👍
RC TROPHY EAO what a great comment man, super pleased with it
Can you do something with c-24
Helltech Gamer already have make at least 3 modifications with the c24 on previous videos
Nice
Looks awesome with dually wheels. Nice trailer too...
Hooptie Rides&Reviews big thanks man
Amazing how u transformed this thing! Nice
⭐⭐⭐⭐⭐ 👍
Exceptional build!👍👍
Excellent!! You have the talent of God, the "golden hands" is just a terrific sight !!!!!!! 😉👏👏👏👏👏👏👏👍👍👍👍👍
RC TROPHY EAO thanks a lot, what a great comment and super compliment
just watching your creations here do not pick up other words😉
Can I Like buy those 3D printed rims somewhere or could I like buy some from you for a price Goncalo??
K/D The Kill Death Ratio so far I don’t sell them because I’m trying to lower the prices of the prints, after that I will start to share links on my videos too
emejing ghaesss
Wat moter
Sir, how do I want to buy a 3D part of the printed with you sir?
hafizul Izham well we’re are you from? I’m from Portugal and probably the shipping costs will be to high
Goncalo Quinas owh you from portugal...im from malaysia sir...owh i see...ermmm... nevermind sir...tq
That is so cool great job what do you think about the q60
Fixe
Nice job good video super video
Tommy Montalvo thanks a lot
Now that is awesome, I dig it the trailer is really cool, I watch for more
Boas amigo! Muitos parabéns pelo trabalho. Você vende as jantes duplas?
Is it waterproof electronic?
Qba G nope you will have to do that yourself or buy one’s that come waterproof from factory
Wow. Well done made it! You have a creativity skill. 👍👍👍👍👍👍👍
I like your new showcase setup. 👌😀
Dan Gavin hehehe, the revealing stage. Thanks
i love wpl sir
Superb look. Giveaway please
Can you do double wheels on the b36
Bro i like the rims... i wish to have too...
you are so cool broo i like it.. 👍👍👍
Nice truck! Where did you record this? What country is it?
ильяс аблякимов thanks a lot. On Portugal, more specific on the Tejo river
Well made! I like that! DIY...
I don’t have a 3D printer even if I did don’t think I could use it is their anyway I can take the files and have some one like shapway print it for me
wonderfull effort to build with awesome truck result, good job Goncalo
look that left front tire need to glue with the rim after hard work 😀
is there a guide how to fit the 2 speed gearbox? I hope to add it to a jjrc q63
Mark Alexander DeGiorgio for WPL models, the gearbox and motor fits fine. On JJRC models you will have to cut of pieces of the bed.
Thank you I enjoyed.
This is great. Thanks.
Another cool video and nice build :)
Could you do a dual wheel v2 that is offset inwards so the outers don't stick out as far?
DaveyGa thanks a lot. That’s on the max offset possible, more than that would rub on the chassis
Goncalo Quinas That's kinda what I thought, I see Gabriel Silvaz had to go to narrow tyres to fit his duals under.
you're totally crazy my friend and can be proud of your job!!!
morhozh aelroth hehehhe, the best comment so far. Thanks a lot
Super nice truck bro, cool work.
djamet yankee big thanks
👍👍👍👍👍☺️
BROTHERS AND SISTERS CO BROTHERS AND SISTERS CO big thanks man
Install proper navigation lights with indicator lights and engine sound and upload video please
Hehehhe, would be nice but on the next build, the 1/10
Sir if i want to buy your truck how much will it cost🙏
Santi Lotino I really don’t think it’s for sale. But, if you want my opinion, probably 200 USD for the truck, paint and electronics.
Primeiro, parabens por todos os videos que sigo cada vez com mais interesse. pergunta, isso é na chamusca ou perto da Chamusca? Abraço e continua com os projectos sempre interessantes!
nivaldo lopes muito obrigado. É muito perto, fica na extração de areia entre a Tapada e Alpiarça. Eu sou de Almeirim
Nice good job very bery perfec
È UN CAPOLAVORO! !!!...che gran lavoro ..ben fatto !!! Stavo guardando TH-cam e mi son detto "questo è sicuramente un lavoro di Gongalo"...grande idea di fare le ruote gemellate e il trailer è magnifico!...fai sempre delle novità con la stampante 3d...vorrei imparare ad usarla anche io!
COMPLIMENTI Gongalo!!!!👍
Ciao mitico!!!!...al prossimo video! !!
Daniele Mulazzi big thanks on the comment, the 1/10 car of the last video was full 3D printed. That is really one of my favorite
Fantastic work, dude! 😊
MC's Creations big thanks and for all the support
Goncalo Quinas Absolutely no problem, man. 😊
I like that very nice build
Awesome build , great truck and excellent look !!
sator rotas thanks a lot sator. Could be a 1/10, would be nicer. Hehehe
Yes it would be good, I wanted to build a 1/6 (the M35A2 Kaiser Jeep) for my figures on the basis of Traction Hobby . I might see this winter 😊 Continue your good work, always a pleasure to watch you 👍👍
sator rotas huuuuuuu, that I would like to see on live view. Hehehehe. You are from France right? Never came to Portugal?
I'm thinking of starting this new project in September, it's going to be a very fun build . Yes, I am from France, I go to Spain several times but never to Portugal 😊
Super cool man
Always love the work you do on these "WPL" series trucks,those front tires look more accurate than the stock ones,well done friend:)
no1fixer thanks a lot for all the support, very pleased with the support
Awesome articulation of the rear suspension, looks scale as f*©k! And I love that trailer! Good job
hund rah huge thanks on the comment. Heheheh