Hi Peter. I think the fuel was maybe old and maybe the ether had evaporated a little. Normally goes first flick, but of course when on camera it plays difficult! I think on this video I encountered every possible problem .... good training video perhaps?. Bests john
Pleasure ... its an 8x4 prop, SouthernModelcraft sport fuel. Two ways to stop motor a) pinch fuel tube or b) put fingers in prop. I would go for the former method. Also not visible in the vid, always use a fuel filter. Will have the dog dancing to the next one!
Thanks for sharing this. 4 minutes to start a 1.5cc PAW - I'd say that was pretty good going. Nice to see it is possible in under 20 minutes and without a bloodbath! :-) Why is it that some diesels will start from cold in maybe 5 flicks? (I'm thinking Mills 0.75/1.3, ME Heron, FROG 1.49 etc)
...well it starts after all....Some PAW can be a pain...and suddenly the burst to live without warning! I guess you compression was also to low,or to littel aether in the fuel? It seems to me, like you have no ign. improver,as it "nails" when run..With proper fuel,they should not do it and run very smooth at lower comp. setting too. But a TBR is a delight to here running and let scream at max rpm. Great engine for flying!
![เปิดคำทำนาย นอสตราดามุส - บาบา วานก้า ปี 2025 คนทั่วโลกต้องเจออะไรบ้าง? | แฉ 11 ธ.ค. 67 [2/3] |GMM25](http://i.ytimg.com/vi/xmTIKWJUMPM/mqdefault.jpg)
Thank you a lot for this video, I recently got one of these engines, but I have not been able to try it yet. Looking forward to doing so!
Good luck, hope you do better than I did ….
What's the weight of the engine
Hi Peter. I think the fuel was maybe old and maybe the ether had evaporated a little. Normally goes first flick, but of course when on camera it plays difficult! I think on this video I encountered every possible problem .... good training video perhaps?. Bests john
How much money dollars cost this engine
ChEck progress Aero works website
Pleasure ... its an 8x4 prop, SouthernModelcraft sport fuel. Two ways to stop motor a) pinch fuel tube or b) put fingers in prop. I would go for the former method. Also not visible in the vid, always use a fuel filter. Will have the dog dancing to the next one!
Third option is to fiddle with compression
@@nikki1295 True, that!
Muito top ❤🎉
Where can apex person get a diesel engine
eBay, or go to PAW or redfin on the internet
Thanks for sharing this. 4 minutes to start a 1.5cc PAW - I'd say that was pretty good going. Nice to see it is possible in under 20 minutes and without a bloodbath! :-)
Why is it that some diesels will start from cold in maybe 5 flicks? (I'm thinking Mills 0.75/1.3, ME Heron, FROG 1.49 etc)
Jim
Go for mills or fedfin Mp 040. Side port start first flick…..
...well it starts after all....Some PAW can be a pain...and suddenly the burst to live without warning! I guess you compression was also to low,or to littel aether in the fuel? It seems to me, like you have no ign. improver,as it "nails" when run..With proper fuel,they should not do it and run very smooth at lower comp. setting too.
But a TBR is a delight to here running and let scream at max rpm. Great engine for flying!
From where we can purchase this
progress aero works … om t’internet thingie
PAWs certain,y hide their light under a bushel! Mine has 'tbr' on one lug - for twin ball race. No name, no brand , no logo. Just quality.
မိုက်တယ်
😮
thank you for the help
What was the price of this engine
About £120 new, but check website.
@@johnchadwick3237 what are this website
@@yogeshbaghel9207 search for progress aero works, or Eiflander ..
Canr believe I flooded it ... after all that I said!
এর দাম কত
I think you didn t know what you were doing ??? God mate ya nearly lost ya fingers a few times there???
eight left …
Bare fingers ! That ain't right, you'll get hurt.
Seven and counting (down …)🤪 no pain, no gain!
মোট কত টাকা লাগে
quite!
Dog doesnt like Postie!
needs more ether
Yes, I do!!