ฝัง
- เผยแพร่เมื่อ 27 มี.ค. 2021
- Hallberg Rassy 312 "Ellös" - Sea4See: "The Refit of Hallberg Rassy 312 Ellös"
Good morning everyone for you the brand new fresh episode DIY BOAT where you will see the polishing of the brass edge of the boat and the repair of the old holes in the gelcoat ... the installation of the new Teak support and the ROKK MIDI Scanstrut for my new Vulcan 9 Plotter and finally the new SS316 container in the stern locker for the reserve gas bottle!
If you like my video, leave THUMB UP and happy to get your comments I will reply to you!
A hug Gabriele.
➡️Many thanks to Toptech Solution and Franco for his immense support and sponsor me:
www.toptech.it/
➡️Many thank to Stefano Moretti & Luca Caironi of Lineastem for support and sponsor me, if you need a new teak deck do not hesitate to get in contact ,they have excellent prices and professionalism at the top, here the website link and contact infos:
stemnautica.it/en/societa/
➡️Thanks for support me and my project also to Joakim of Batsystem for light and electric stuff:
www.batsystem.se/en/
➡️For spare parts for my Hallberg Rassy... thank to Ludwig at Hallberg Rassy Parts!
Don't and waste your time to find something you can find at:
www.hr-parts.com/
➡️Many thanks to Ennio Prase owner of Prase Media Technologies distributes products for the audio, video and digital signage sectors in Italy include Shure Mics and many other top products, check it out..
www.prase.it/
➡️Many Thanks to Stefano Finco owner of Armare Ropes and Tiziano, among the leading companies in the sector of nautical ropes, offering a comprehensive range of technologically advanced products.check it out!!
www.armare.it/en/
➡️For epoxy resin and all stuff related Mr. Marco Cecchi, a master of knowledge and best products around!!
www.cecchi.it/
➡️Many Thank to Daniele Guidi Owner of Guid SRL..Guidi, since 1968 the made in Italy for the nautical industry.
www.guidisrl.it/en/
➡️And off course many thank to Marco Potente, and BENMUSIC to give the permission to use his music in my videos. He is probably one of the most talented musician and producer 🎸 !!.
I will forward the website where you can download the tracks for your videos or project. Stay tuned!
audiojungle.net/item/the-fly/...
------------------------------------------------------------------------------------------------------------
➡️ About ®Sea4See - Official: Sea4See ⛵ was created with an aim to share my sailing life experiences and knowledge, especially restructuring sailboats. In my youth I worked in a factory where they built kayaks made by fiberglass so.. learn a lot regarding. In my off days from work, I have worked for a long time in a shipyard, further benefiting my knowledge and enhancing my sailing, boat maintenance skills. Today through my sailing vlogs on TH-cam, I want to share my sailing stories, sailing lifestyle videos, sailing adventure with all of you. I love working on boats because i belive that all boats have a soul...
More info...www.sea4see.org/marieholm-26-t...
➡️ About Gabriele: Hello friends my name is Gabriele and I am an offshore Yachtmaster. A yachtsman who is passionate about everything related to the sea and sailing lifestyle. After having sailed in the various seas of the world, I bought my first boat and then refit her and later I left for a sabbatical year sailing through the islands of the Mediterranean. I am passionate about DIY in sailing boats and now after selling Dreamer which was my first boat, I am restoring "Ellös" a Hallberg - Rassy 312 that will take me back to the seas of the world..
Read more about me www.sea4see.org/about/
➡️ About My Boats: The Hallberg - Rassy 312 was built for fifteen years between 1979 and 1993. Totally 690 boats were built during this time period. The HR 312 was a very popular model. Until 1986 the Hallberg - Rassy 312 Mark I was built, with the portlights in the blue stripe in the hull and with or without quarter berth. Models without quarter berth had an extra cockpit locker on starboard.
Read More..www.sea4see.org/marieholm-26-t...
___
⛵ Important Links ⛵
___
☑ Subscribe ®Sea4See - Official on TH-cam: bit.ly/Sea4See-Official
☑ Follow ®Sea4See - Official on Facebook: bit.ly/Sea4See-Facebook
☑ Visit ®Sea4See - Official Website: www.sea4see.org/
☑ Follow ®Sea4See - Official on Twitter / sea4see1
☑ Follow ®Sea4See - Official on Instagram / sea4see
☑ Join ®Sea4See - Official Affiliate program www.tubebuddy.com/sea4see
#Sea4See
#Sailing
#SailingVlogs
#SailingLifestyle
#SailingAdvantures
#SailingChannel
#SailingVideos
#SailingLifeVideos
#SailingVideoTH-cam
Category
People & Blogs
Music by Bensound
"I have a license or written permission from the proper rights holder to use this material"
➡️Visit www.Bensound.com
Your videos makes me happy and relaxed. Love seeing true craftsmanship.
Thx Jim happy!!!💪🏻💪🏻💪🏻
Really, I am at a loss for the proper words for this...it is just a support for a gas bottle....but it is a thing of beauty and so well designed as to be a technical award winner! A very nice use of the ironworker machine.
Thx very much for appreciate my work mate!!
@Magnus Rassy : please do Gabriele a favor and don't forget to always countersink the holes to avoid cracks in the gelcoat. Man, you're a great ambassador of your country !
Ah ah ah thx for support my crusade of countersink the gel coat!!!
If anyone deserves fair winds and eternal sunshine, it is you Gabriel. Well done!
Thx al lot!! 🥰
You are a true son of the renaissance, with your attention to detail and your dedication to beauty. Bravissimo!
Thx Clare!!! Detail are important
Excellent to see you are restoring your boat to the same standard that HR set when they manufactured the original model. I was in Ellös recently to collect a new HR50. The quality is fabulous throughout. My favourite yachts.
Thx Raymond!!! Appreciate!!!
Beautiful job and your patience and love for this vessel is a true blessing looking forward to seeing many travels and adventures on Ellos many safe travels and fun adventures fair winds with following seas Gabriel
Thx mate for kind words really appreciate!!🙏🏻
Absolutely top design, problem solving and craftsmanship. Precision second to none. You are amazing. Like it!! Bravo!!
Thx guys appreciate you like it!!
Great craftsmanship and great tools to work with. Thanks for sharing.
Thx mate!!!
attention to detail is incredible ...well done again
Thx a lot! 🙏🏻
Lot's of hard work on the brass rails but as usual they came out beautiful - "Job Done"
Thx Tim!!! Really job done
Great progress on the refit. Look forward to your next video.
Thx Jim!
Nice job
Thx Marcelo
Complimenti Gabriele ..
Grazie
Work hard rest easy as they say. Your rework and refurbishment is of the highest standard and a joy to watch...Looking forward to the "splash". All the best.
Thx mTe for me details are important to don’t come back to same work in a while!!!
Nice work
Thx tim!
I'm excited. Cannot wait for the launch!
Belive me.. tooo. But still lot to do and organise
I have followed your channel from the start and I have much respect for how you have taken on the task of renovating your boat.Do you intend sharing the details on the cost of the renovation?
Hey terry thx! Didn’t have idea how much I spend until now I will make all the bill at the end...but I think around 60k !
Bravo, Bravo, wonderful work! Thanks for the episode
Thx Nena!!💪🏻
Beautiful work once again, really lovely to see. Actually, it’s amazing you’ve managed to get so much done at this standard in such a short space of time. Well done ☺️👏
Thx mate lot still to do!!!
Great attendance to detail
The brass strips look great!
Yes finally those work are finish...
You're doing an amazing job . I love the attention to detail. its very inspiring and I can't wait for the day you launch your boat , be sure to make a video on that day . look forward to your next project.
Thx John I will filming all process!!!
Gabriel you are very consistent. You consistently produce beautiful work of the highest quality. Great attention to detail as always. After the final Polish of the brass strips (which look gloriously spiffy😉) - did you spray lacquer them? 😀👍⛵️
Thx Norman!! No I didn’t spray laquer... I’m really under pressure to finish.. I didn’t film the usually fuckup like yesterday....😂😂😂😂
Hi Gabriel,
Great work again! Will you be able to operate the stoppers when the screen is in place?
Good luck to you, best regards,
Pieter
Hey Pieter great question!.. finally yes.. my setup is to use more the port stopper
Perfect job again. I also clean the bras of my 352 every year. But is the gas bottle placed in a air ventilated box?
Ehi Edwin, no the gas bottle is not in a ventilation box is quite impossible to make it in the stern locker... it’s only a support for spare one well fix to avoid problem during sailing.. I will have a gas detector inside in case...
Ive heard if you coat the brass with west systems epoxy with a clear hardener the shine will last. I’ve never tryed it . But it might work .
Thx Brian epoxy is very sensible to uv ray..... didn’t know if is a good idea...
At 24:15 "I don't want to explode myself . . ." Well, we don't want you to explode yourself either! LOL : - ) So splash time is 1 1/2 months away? Will you then begin to take us with you to where you go? And, . . . will you have young women in bikinis with you? : - D Scott W
Scott first test and test... this summer hope Croatia for sure I try to rent nice girl with bikini more view... if I hide my belly..😂
Have you check your insurence , with that gas bottel installation. It says that you must have a free air outlet from the boat.
This is a spare one the one in use has the vent.. statistics show is more fire on boat due a faulty electric system for owner incompetence Than explosion of gas bottle..for this reason no one insurance will want stay in marine business 😜
5:04 there seems to have been a problem
Bob / Huston we have a problem!!! Thx for notice me!!!
Da Maggio i Lunedi' avranno meno senso :-(
visto che luciderai l'opera morta, considera anche un trattamento di nano+anti UV per sigillare e proteggere il colore.
ho visto risultato di una barca che l'aveva fatto 2 anni fa' e tutt'ora l'acqua scivola senza creare alcun film e non vi sono cambiamenti del colore (blu) dovuti al sole.
Sei un mito !!
Grazie!!! Nano tecnologia lo appena utilizzata negli oblò ...
To me ,it looks like your recess for chart plotter block is to deep.It is normaly 3mm.If it was me.I would put rubber underneath to bring it higher.and the rubber absorbs shock.I would have made my block longer.And a bit thinner,As for the brass,every old boat used to have brasso on board.Im not finding fault.Its just the way i would have done it.
Mate..is difficult to explain in a video.. your idea is great and I pass over due the fact that all stuff is like a jigsaw ... ands still struggles to finish it.. for sure I need to test it but I still have a spare to swope if need...
@@sea4see As i say.i was not finding fault.Its your boat and you are doing a great job.I would prefer it to look more like a slightly thinner panel.Than a block.I think when finished.It should be at the boat show.If i was halberg rassy.I would use it to show just how good there boats are.