CVTech CFMOTO Clutch Kit Install | How to Re-Clock Secondary & Install Kit
ฝัง
- เผยแพร่เมื่อ 25 มิ.ย. 2020
- Here is a how to video on how to Install Your clutch kit once you receive your Airdam Clutch Kit from Main Street Cycle. Also we show you how to Re-clock your Secondary clutch. I hope this is Helpful for you. Remember You can let Main Street Cycle install the kit for you if you can make the drive.
Call Main Street to order your Clutch Kit for your CFMOTO!!! 662-438-6407
Here is the Link to Main Street Cycle: www.mainstreetcycle.com/
Here is the Clutch Compression Tool: epiperformance.com/clutch-com...
When you get a chance click this link:
/ realtalkpowersports
Check out my new page where you will have the opportunity to get content and behind the scenes footage and also could have a say so in up coming videos on the channel. I encourage you to watch the short video that you will find on this page and check out some of our goals and benefits of becoming a Patron for the channel! Yall are Awesome!
If you want to see what CFMoto has to offer subscribe to our channel.
Also go check out Main Street Cycle @
www.mainstreetcycle.com/
Also Visit their Facebook Page @
/ mainstreet.cycle
God Bless!!!
#CFMOTO #CFMOTOUSA #MainStreetCycle
Call 662-438-6407 to order your clutch kit from Main Street Cycle.. the number listed at beginning of video it incorrect.
I just called Main Street and they will not have the kits for the 600 available for a few weeks. They did not yet have a price either.
Yea I went got my 600 Friday they going to be close for a whole week(Vacation) so they told me two weeks
What's the price to bring 600 in and have clutch kit done? Also, will they install a warrior riser snorkel kit?
@@keiththesquirrel hey Keith, just give them a call Monday.
Should you wait to install till after you break it in?
You guys are the cfmoto gods! Can't wait to get my machines. I will know a lot about them! Good job guys.
Almost forgot - I would love some more maintenance videos - especially for the CForce 400 (e.g. Spark Plug change, fuel filter change, etc.) Thank You again for the great videos you make for us!
I don't even have a CF Moto, and learned a lot from this video. Great job, sir.
Thanks a bunch!
Thank you! I have a 2019 and there are not a lot of videos on how do stuff in English. Appreciate your time you spend making these.
I took my secondary apart and put it back together, but when i took it off the spring jumped out and threw everything all over my garage, do they all have that key that goes into it, because i have a slot and lined them up but i couldn't find a key that goes into it? did i mess up?
Most definitely. These videos are excellent!
If I could double thumbs up this I would! Awesome video!
Thanks so much
Thanks for the video, Blake. I just ordered my airdam clutch kit from Adam for my 600 touring. Can't wait to see the difference. I'll use this video to help me load the new weights and spring !!! James
AWESOME!!! I know you will be impressed
Hi,what is the difference in your experience after the kit?
@@GeneracionGoshen777 Nothing really, but I didn't reclock my secondary . I called them to ask if I could wait until I got bigger tires and he said yes. I advice to reclock secondary when installing the clutch kit to get full results.
Yeah I'm trying to find out which kit and settings I need for a 600 Touring stock machine.
@@KakarotsSpirit4 I would call Adam at Air Dam and talk with him. He and Blake has lots of experience with these machines and can help you out with your specific needs. 👍
Great video Blake. Thank you.
Your welcome
Great video. That 400 is gonna feel much better I’m sure.
Thank you sir and yes I tested it last night and it did great! The weather is terrible right now so it will be a few more days before I can finish the 800 video and the 400
That’s the video we’re all waiting for. Gonna get that bottom end snap back that those big tires robbed a little bit of. I kinda think the 28’s I’m gonna use won’t require a clutch kit I’ll probably do it for longer belt life. I’ll chat with Adam from airdam when I’m ready to get a kit tuned for it.
GREAT JOB
Thanks !!!!
Awesome video man!! It looks so easy to do I'll will be buying the set up for my 800. Did you do the 800 on the B3 also? I want to see the results for bad lol I have some 29" xm310's coming in Tuesday.
I will probably be at MSC in Spring of 2021 to have this done to my UF1000...
Is there a certain torque you set your impact wrench to? I always worry about breaking a stud, nut, etc. if I don't use a torque wrench. Thank You for this video. I recently purchased a CForce 400 and have been using it to plow snow here in Minnesota.
Hello! Great videos!! We get a lot of information from them. Yet i am a litlle unsure with what option i should go with. I have a cf 820 from 2019. It has quite a bit of power, but i would like some more torque. Most of the time i go on mountain roads with moderate to hard climbs, so i need it to pull in Low gear, even at higher rpm.
When you guys reinstall the drive clutch there is two marks on the outside ring of the clutch face that you need to line up so it stays balanced as the clutch is balanced as one
Hey I have a 2021 cforce 400 which has a one way bearing behind the primary clutch. Which way does it suppose suppose to spin?
Does this new kit get rid of the clutch noise that the stock clutch has?
At 3:58 in the video, how do you know how many turns to twist that for the right tension? I'm trying to do mine.
Hey does anyone know if this kit is available for the 600 Touring and what the recommended settings are for a stock machine?
What gram weights and spring is used for cforce 500 ? I want to do mine
Hi Blake is it necessary to have to take that side plastic panel off in order to get the clutch box cover off? I am working on a CForce 400 as well. Thank you!
Would re clocking to A1 or C1 help with the jerkiness of the Uforce 1000? Or is there anything that can be done about that?
Hello everyone , how should the rollers in the variator be heavier or lighter? To have better acceleration and have more climbing power.
I have a 2019 Uforce. Any suggestions on a lift kit?
don't break these bolts with that impact. Some impacts are really hard these days. Snap small bolts easy. I would buy torque wrench for last tightning
Where do I find the torque pound settings for nuts and bolts for my machine?
How big of tires can you run without the need for a clutch kit
I have a cf moto 550 2019 can you tell what way the one way bearing should spin on the shaft please to double check anti-clockwise or clockwise changed my secondary and my one way bearing still geting wining noise could this be belt
Maybe just for the mechanically declined. Why would I change my clutch? What does upgrade do?
I just bought the new 500 last week and I noticed when I break on gravel it has a popping not sure if it's cvt or what it is but it's annoying since it's a brand new machine. Any advice? Is this common?
Awesome, looking forward to install a kit like this on a 450 but how much is it and how much would the shipping to romania be?
What is the difference between B3 and B2? I just received the clutch kit for my 400 this week and my directions state B2.
Hey dude. Love your channel. I’m from New Zealand and have a CForce 800. Any chance you could fwd me as shot of the label under the cap of the fuse block. My one is a crappy paper sticker and is unreadable. Keep up the great info. Also been in touch with Airdam clutches re one way bearing kit which doesn’tcome as a standard fit on our machines in this part of the world. Hope you can help. Kia Kaha. Graham.
I have a 2021 cforce 600 stock what should I clock my second too
I just picked up a 2019 800xc. What's the purpose for the clutch kit? I'm in the process of tearing it down and doing a deep clean and just checking out where everything is at. While it's tore down any upgrades I think will help me I'll do. Great channel!
Thanks Eric.. we have a few videos on the channel explaining in detail about the kits for CFMOTO and Main Street Cycle carries the kit that i recommend for each model. So all you have to do is call them and tell them what model you have and they can ship you the kit you need. It will consist of new Primary Spring and primary weights and instructions on how to reclock your sevondary clutch. It helps eliminate belt slipping, its allows the engine to go higher in the RPM range to apply the Horse power that the engine is capable to apply and increases the rate of acceleration.
Ha! I was put "on the list" for MAIN STREET CYCLE for my 2021 Touring 600.... still have never heard back... I tired to getting a hold of AIRDAM directly, but they don't respond either.... :-(
I have a CF Moto Z-Force 800 trail just wondering what would I use to clean my clutches with
Hey Blake will reclocking the secondary on my uforce 1000 to b2 help with running 30s
Tell Joel, I don’t know what kind of grease he was using but we use graphite grease that way stuff don’t stick to it. It’s a dry grease.
2021 600 Touring in 2wd High
Idles @ 1400 rpm
moves @2300 rpm
8mph@4000rpm
11mph 5000@ 11mph
low end torque high rpm vibration killing me
i'm a Hunter usual speed under 20mph quiet is Golden!
What helps ?
Whats the torque on the clutch cover after all work is done
Hi!
I have Cforce 450L 2019. and from quad I want more power in high gear when i go uphil.
Now in uphil my cforce is loosing power, rpm is the same but speed just drops.
I contacted Airdum clutch and Main Street Cycle but no one has responded for last 3 weeks. I would really like to install a kit ( spring and rollers) for primary clutch. Is there some website to order central spring and variomat roller?
Can i just re-clock secundary clutch for better performance for drive uphil in high gear? And in what position I need re-clock secondary clutch?
Thanks!!
For the spring tension for B3 is aroumd 70 degrees (according to the video you linked in another comment). So even though everything lines up if i i go straight down i still need to rotate around 1/4 turn to the next leg? Is that how the tension and clocking work?
Good question wishe they gave a answer
What stage did you get for the 800xc
Wouldn’t the grease on the clutch attract and hold on to dirt and dust?
What size is the bolt to spread the clutch to install the belt ?Blake
Do you know the spring model number .ex 200/1200, 500/1200, 400/1772. So many more options to choose just wondering if you knew. Thx
I will be doing this to my future 600 after the break in period! Awesome video man, but I can’t help but think that maybe CF Moro designed the clutches to be spongy to maybe make it more reliable for the long term? Just a guess, but have you heard or experienced anything go wrong with them since the install?
Jacob all the ones that I've put clutch kits on have been great. No issues.
@@RealTalkPowersports Okay perfect, thanks for another reply, one of the best and most informative off road channels on TH-cam👌🏻
Hi, I have a question as to what this clutch kit will do for the performance of your quad. Will it lower the rpm's, increase speed, achieve better fuel economy???
All depends what kind of kit you get. Some will give better accel but lose top end. Some the other way around. Just depends.
Hi.I follow you all the way from Romania ,I have a 520 and already I have 4000km on bord.as want to know how to adjust the fuse on the back,I drive more in offroad and quite aggressive,I would like to know how it is more ok to adjust it for what I do with it.wait an answer .by
can you show how to replace cvt belt on the 950 sport?
What is this clutch kit supposed to do? I need to modify the clutch on our UForce 1000 to provide a smoother start.
Hey guys, I’m thinking to buy a cforce 600 touring, but I see a lot clutch issues,
So my question is, Do I need to buy a clutch kit for a new unit ?
Thank you
What stage# kit was used on the 800? Just bought my 2020 800 and want more out of it. Thanks, channel is outstanding?
Thanks Greg!! Call Main Street Cycle, they carry the exact setup that i run
I know I have asked a couple questions but the last thing that is confusing me is that there are 3 triangle pieces and 3 rubber feet, which one do they need to be against, because i went to A-3 and it lined up perfectly with my mark from B-1, so i didn't have to twist it to get it on the right side of the rubber foot. Should i have twisted it anyways and tried to go to the next rubber foot?
Yes it has to be twisted because that is how you get your "Spring Tension" A3 should be around 88 Degrees which is a LOT! I am at C2 on my 800 and 500 and B3 on my 600
Blake I just received my kit from Main Street for my 800. It says to clock it at B3 but I noticed you said you had yours set at C2 which one is correct ? Thanks
B3 is perfect... B3 and C2 are only like 1 or 2 degrees difference.
Hello ,
did you have the links of the parts buy i have a zforce 800 and I would like to give more responsiveness Thank you
I’m looking for a kit for my cforce 820le. Do they. ship to the uk?
Are these kits available in Canada by chance??
actually you need dust proof grease in there, not water proof. Because in normal conditions there is a lot dust and not water. Dust should not stick to that grease or it will not move freely
i have a 2021 cforce 600 touring with 65 miles on it.i like it very much but after riding for 30 mins or so i parked it to check the clutch and the metal housing around the clutch was quite hot is that normal
Yes
Hey how you doing? I have a quick question about my 2019 cf moto 800xc. When I ride my cf moto a Lil over a hour it starts to cut off when I hit da gas. It also start jerking hard like it’s catching gear hard when I first hit da gas. Now when it starts to do that I let it sit for about a hour and it stops and start riding normal again. What do you think that could be?
Awe man i am honestly not sure.. Id have to ask my shop...
Thank you a lot but I will b taking that 3h trip to Main Street to get da clutch kit done. How long do it take to do the clutch kit?
Just installed the clutch kit for 2021 cforce 600. Primary clutch is a 32mm and secondary is a 36mm. Also got it all together and the secondary is so tight it dies as soon as you put it into gear
Was there a big difference
@@remo900rr not really. Apparently the clutch kit I got was for bigger tires. I was told that was the only kit they had at main street cycles. I am not impressed with the power of the cforce 600. Everyone I have let ride the bike asks if something is wrong with it.. Eventually I would like to get an entire new clutch kit from airdam clutches with new primary and secondary and not just weights and a spring. If I had to do it over again I would not have bought the 600. It is way under powered. I also have a 2013 honda foreman 500, and 2019 polaris 570 sportsman. Both put this thing to shame.
Hey man quick question on install for the new clutch? Is there torque specs to follow when installing or servicing the clutch? Is it the manual? I notice you are just using the impact.
You have to have a special tool to hold the clutches to be able to properly torque them.. but the guys at the shop have certain impacts calibrated to be able to torque them like they need to be. The torque spec is in the service manual
Thanks brother. I just bought a CF Moto 600 touring.
How that Little thing from the clutch calls? Like the tornillo
Great job, a shame we cannot order the upgrade to Croatia :(
Can you tell me what are the torque specs for bolting on primary and secondary clutches back to the machine? I can't find them anywhere...
Ok, so for all of you that are searching the internet for the answer, I finally found it in the service manual (for 850xc). Driver pulley main nut = 180Nm, driver pulley shaft nut = 60Nm, driven pulley nut = 150Nm
hello friend what configuration do you recommend for my cfmoto 800xc with 30 '' mud tires I need more power for the mud
the MSC Stage 3 Mud Kit
What set up do you have on the 600 and how long dose it take I’m coming today
Hey Chris, i dont think they will have the kits in today, because they are waiting on Airdam Clutches to get the kits put together and sent to them so they can stock them and ship them out to everyone or install them for people
Great videos, does a reclock affect the cfmoto warranty?
I dont know how they would even know you reclocked it unless you had a clutch problem later and they took it apart
I wanna change up my secondary clutch I already upgraded the primary. But I’m looking for info on what I should change it to (secondary)?? I like to ride hard and fast. Stock rims woth mud lite 2’s on.
I Would recommend A-2. Or even B-3. What size are your mudlites and what machine do you have
Sorry I thought I put that in there 🤦🏽♂️ I have the 2020 cforce 500 and it’s just stock rims
@@BrandoCG You will definately see great improvement by going to A-2
Awesome thank you. I watch all your videos daily. I want to do the lift kit but don’t want the back wheels sticking out lol
@@BrandoCG All you have to do is buy some front wheel spacers to make it match.. or you can go to a 14 inch aftermarket rim with a 5+2 offset and you wont use the rear spacers.
just got a stage 1 cluctch kit from msc for my gen2 cforce 450s. can i reClock my 2ndary to B3 also? what are the effects? thanks blake
plan to run it with 27s if its possible
I have a 2021 cforce 400. Is this clutch kit still available? I cannot find anywhere..
Kevin i know MSC is constantly working on getting in the kits.. as soon as some come in they are gone.. because they have a waiting list for them.
IDK how he did it, but he made the part where you turn the top disk to line up the notch with the rubber bumper, mine will NOT go back to its original position, i pulled my back trying to turn it, is there something i'm missing? Is it suppose to be this difficult?
No sir it shouldnt be that hard to turn it.. Im gonna send you another video link that may help you out
th-cam.com/video/2JED-oeXc-U/w-d-xo.html
I think i see, you can turn it only clockwise and it doesn't look like it matters which rubber boot you put it against as long as it's on the right side of it.. lol i kept trying to put it counterclockwise back to its original position.. Thanks man, HUGE help.
What's the cost for the clutch kit upgrades
Hello I'm from Brazil, here I have a ZFORCE 1000 SPORT, equivalent to the American ZFORCE 950 H.O SPORT.
The Brazilian market does not have qualified mechanics, the little I learn is from watching your videos.
When trying to contact CFMOTO Brasil to obtain information, they refuse to respond.
Could you tell me the position of the secondary CVT of the ZFORCE 950 H.O SPORT?
Been trying to get a clutch kit for my 600 for a few weeks now they are sold out
I know Main Street Cycle has them in stock.. Call Monday Morning after 9:00 and tell them Blake from Real Talk Powersports told you to call and ask for a clutch kit for your 600. They will box it up and ship it to you very quickly 662-438-6407
How much do clutches for a cfmoto 800 run for? Thx, great videos...
Call Main Street cycle and they can get you a price
Ok, thx
What is the grease you're using?
Dexter it was just a Marine grade Water Resistant Grease.
Can I ask why you did this I have a 2022 Uforce 1000 clutch take a minute to engage will this help
Yes a MSC Stage 2 clutch kit or a MSC STAGE 3 Trail clutch kit will do wonders for your UFORCE..
I’m currently running the stage 3 trail kit in my crew cab..
You can get it at mainstreetcycle. com
Did you silicon the cover when you reinstalled it?
No, the factory seal on the clutch cover is very good.. Just always inspect it and make sure its in the groove right. Ive never had one to leak
@@RealTalkPowersports is there a torq spec on the cover bolts? Thanks for your help
Any idea how I can get this kit in Canada?
Hey Jack, I am in Michigan and I ordered mine from MainStreet Cycle and got it in 3 days. I know Michigan isn't Canada but you are right next door! Give them a call, heads up... they do not do website orders or email. Blake has their # in the video. Good luck my friend
@@thatscrazybro7250 Thanks for the response, I will give them a call and see. I was going to check with my local dealer as well, we have quite a few dealers up here in Ontario
What does the kit do. Thanks In advance
Was the exhaust red hot before the adjustment?
What stage kit is it? so I know which one to order
Joe its not any particular stage. Its q clutch kit.. we sell one special kit per cfmoto model. All you have to do is call MSC and tell them what model you have and that you want the clutch kit for your machine and thats what they send you.
It looks like you went with heavier weights and I thought you were supposed to go lighter with bigger tires.
Is this the same clutch kit you had for the 500? Or is that the air dam clutch kit??
This is the kits I run
@@RealTalkPowersports is there other means of contact? Other then calling them? Lol I'm in Canada 🇨🇦 but most definitely interested. More or less will they ship to Canada?
@@justincourt668 hey Justin i believe MSC has only been able to setup a shipping method for inside the US.. They havent ventured out to more shipping methods yet due to increase in cost of shipping.
@@RealTalkPowersports okay that sucks lol. I've tried.talking to cf moto dealers and they look at me like they've never heard of reclocking the CVT blew MY mind.
Would you be able to aid me in what parts I need to get it to the state I want? This is something I'd seriously like to do but everyone I talk to says.. I don't know.. lol
@@justincourt668 where u live
What is the tool he use to open the clutch
Its a "clutch tool" that they use at MSC and I ordered mine from them.
Those weights look larger then the original weights. I thought you wanted to go lighter with larger tires. Factory is 14grams. Don't you want to go down to 10grams? The plastic sliders are 8grams for a total of 18grams.
I thought that the weights have grease too?? 🤔
I would have thought so too because I know a Grizzy has grease on the weights.
What's that tool, you forgot to put it in your description
Thanks i just put a link in there for it.. but you may want to shop around and get the best price for that tool
epiperformance.com/clutch-compression-tool-cct510/?campaignid=1578119757&adgroupid=59027618785&adid=296444636601&gclid=Cj0KCQjwudb3BRC9ARIsAEa-vUsg_-GfVSSq822zAcyzVFuqNAjHGI-xZCvaHr7tfOjwnBpe4mt8htcaArbAEALw_wcB
@@RealTalkPowersports after looking at it more, it looks like it wouldn't be to hard to make my own.
@@shaneanderson6452 that's right bro.. some all thread, about 15 inches long.. or longer
@@RealTalkPowersports thanks, also just ordered the kit for my wife's 500trail.
cfmoto usa put dis man on ur payroll *NOW*
That sure would be a blessing!!
Or maybe send me a SxS with my name on it
Blake should get something for these videos. The videos are the sole reason I got turned onto this brand and bought my 600
Yea man Blake is the Reason why I got one the guy put up Awesome videos
I agree. I have been looking at cf Moto since about 2014. I decided to get back into atv’s a few moths ago and was seriously considering one, but I was very hesitant to pull the trigger because I was worried about quality. Blake’s videos changed my mind. Now I have a 600 sitting on 28in mudzillas in the garage beside my 570xmr. Absolutely love it!
What is the part # of the kit you are installing
Give Main Street Cycle a call. They sell the one kit that i specifically recommend that is unique to each model in the CFMOTO lineup.
Hey Blake can I contact about the clutch kits?
Yes sir.. ill be at Main Street Cycle tomorrow all day. Just call their Number and you can ask for me
@@RealTalkPowersports ok thank sir
Hey Blake can you get a hold of Adam and see if I can get clutch kit from him for my 2021 Cforce 600 , Main Street is out of them.
Whats the setup to make it more fuel efficient?