DIY Powder Coating Oven Build Checklist
ฝัง
- เผยแพร่เมื่อ 15 ก.ย. 2024
- DIY Powder Coating Oven Build Checklist
Some of our videos with the most views and questions are about our DIY powder coating oven build, so we decided to make a video going over the checklist for your DIY powder coating oven build.
We cover all items that are need to build the frame of the oven, as well as how to fasten the oven together in the best way.
We also cover different types of ways to heat your powder coating oven. You can use a torpedo heater like a Mr. Heater, or you can use heating elements.
If you're just starting your powder coating business or you're looking to start a powder coating business, or maybe you just want to expand your oven, or build a new one, this video (along with our others) will help you get there.
Let us know down below if you have any questions about building your own DIY powder coating oven.
Don't forget to checkout our video Building a Custom DIY Powder Coating Oven • Building a Custom DIY ...
and DIY Powder Coating Oven Updates • How to Build a Large P...
710 Performance Merch - bit.ly/710perf...
Are you looking to start a powder coating business, or just looking to grow your current powder coating business? Consider joining our Facebook Group "This Business of Powder Coating" to learn from other powder coaters, and help to grow your business / 276929966748631
Products we use daily;
We use Rim Strip to strip paint and powder coating from wheels and parts. You can purchase Rim Strip from Matt at Chem Express - 314-266-4600 Let him know 710 Performance sent you!
Inkbird PID Controller - amzn.to/34hY92s
3/8" Electric Solenoid Valve 12-VDC - amzn.to/34m0RDZ
9Pcs/Set Universal Vacuum Cleaner Attachments - amzn.to/34nKZRD
502 Piece Professional Plug Kit - amzn.to/3ghd7YN
40 Pc 1/16" to 3/4" High Temp Silicone Plug Kit - amzn.to/34kPTi2
5 Roll High Temp Masking Tape Kit - amzn.to/2CKAiNn
160pc High Temp Assortment Kit - amzn.to/3iTch64
20pc Extra Large High Temp Silicone Rubber Plug Kit - amzn.to/2FI4eeg
3/4" Wide High Temp Masking Tape - amzn.to/3gfFhn0
50 Piece 1/16" X 3/16" High Temp Silicone Plug Kit - amzn.to/2EfDdOx
124 Piece High Temp Silicone Plug, Cap, Masking Tape and Hook Assortment - amzn.to/2YiwdaO
Sony Alpha a7iii - amzn.to/3g1eZFO
Rode VideoMic Pro+ - amzn.to/2Bz9wHk
UGREEN Micro HDMI to HDMI Cable Adapter - amzn.to/34hFns0
Video Capture Cards, HDMI to USB 2.0 - amzn.to/3ha1RPb
Make sure and follow us on social media for more great and different content! If you would like custom powder coating, you can check prices on our website below!
710 Performance Instagram - / 710performance
The Powder Junkies Instagram - / thepowderjunkies
TL’s Instagram - / tl_subie
Jeremy’s Instagram - / jermjerm42o
710 Performance Twitter - / 710performance
TL’s Twitter - / tl_subie
Email 710 Performance at Info@710Performance.com
Make sure and follow us on social media for more great and different content! If you would like custom powder coating, you can check prices on our website below!
710 Performance Instagram - instagram.com/710performance
The Powder Junkies Instagram - instagram.com/thepowderjunkies
TL’s Instagram - instagram.com/tl_subie
Jeremy’s Instagram - instagram.com/jermjerm42o
710 Performance Twitter - twitter.com/710performance
TL’s Twitter - twitter.com/tl_subie
How big can you go? We need a 7X7X23 can this equipment handle this?
The long hinges that you mentioned are called piano hinge.
Thank you, most appreciated 💪
Holla from Puerto Rico bro i learn so much from you bro im cant wait to start this powder coat journey at home God Bless you and keep it up with the awesome content you bring to all of us💪🏽💪🏽💪🏽💪🏽🙏🏽🙏🏽🙏🏽
I appreciate that
great way to explain what you need ! great Video man
Thanks fam! Most appreciated! Glad you found value in it 🤙😁
another vid well done
Thank you my friend
Lists are good.
Thank you!
I can’t wait to get a larger oven build and start powdercoating the suspension on the F150 I’m building as well as make some more powdercoating videos!
Are you going to build your oven?
@@710performance yessir I believe so!
@@Scott46Lee right on!
Thanks for the video, it's very helpful. I'm looking at building a smaller oven - 3' x 2' x 2' Do you think the smaller Mr Heater 30,000-60,000 BTU would provide enough heat for powder coat curing? Thanks in advance.
It should be
The long one piece hinge is called a piano hinge
Thank you!
I've been running electricity in my oven but here I try to do a propane heater when I shut the door goes out
add a vent at the top
@@AZ19130 what size of vent thank you Jeff
@@jeffreyjohnson9169 3-4in should be good
How did the vent work for you?
Thank you
Do you think i will need a fan in my 8'x8'x10' oven heated with a torpedo heater?
You should not.
I've always calculated to allow for an exhaust fan. This can make your oven interior slightly negative and this prevents all the whining about burning eyes and eliminates carbon monoxide naps. Sending the exhaust through a heat exchanger so that the potential losses can be used for building heat if it's cold enough or as a preheated inlet supply for your burner. I was wondering, do you loop oven air back through the torpedo heater? Is this even an option or will the heater overheat? I doubt it would handle full oven temp but might be okay with a percentage.
Just a few thoughts. Oh, one more thing: running parallel thermocouples is a trick to stabilizing temperature. They give an average temperature without having to add any hardware.
@@WireWeHere I appreciate the info you gave me. I don't plan on looping any oven air through my torpedo heater because like you said, i think it would over heat. On the thermocouples, mount one low and one high?
Good video but... Fiberglass will NOT CATCH FIRE! Mineral wool is better however check your facts...
Mineral wool is better for insulating the oven for sure. As for gaskets fiberglass lasts much long and is more durable than mineral wool, making it much better for gaskets. But people can use mineral wool if they want, they just may have to replace them more often, if they can easily find them.
yup exactly what I was thinking! I used fiberglass on my oven
Will my Diesel heater work?
It will depend if it has an auto light or not, I believe some people are using them.
Do you think a kerosene torpedo will work also?
does it have an auto light on it?
@@710performance yes it does
Do any of these heaters, timers, and / or termostats have USB or RS232 interfaces? I would like to be able to log everything to a computer.
These don't, but I'm sure there are some out there.
This might be what you're looking for. A quick search on Google and I was able to find it bit.ly/3p96DSn
What size rivets did you use? You said you used 18 gauge metal, what kind of metal, aluminum, iron metal,...? How much is the cost of a 4’x8’ sheet where you are now. I checked black iron 4’x8’ black iron for outside of oven @ $75 each tax included.
I believe they were 1/8" rivets. I don't remember the cost of the metal, but in one of our videos we went over the cost of the entire oven and we had the metal price included. $75 sounds about right.
Hey guys, how do you deal with venting fumes when powder coating parts. I have realized that when i open the door a lot of fumes/smoke comes out which i am sure is not healthy to inhale... thanks in advance..
We’ve never had an issue. Some powder do tend to have a different smell but no fumes really
We’ve never had an issue. Some powder do tend to have a different smell but no fumes really
Does your oven have a vent....
@@robinrickhi4934 yessir. We mention it in a couple of our build video i do believe