HOW TO REPLACE A FUEL PUMP IN 90 MINUTES! - Ford Focus 1999-2007
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2016
- Thank you for watching, this is a video tutorial on how to replace the fuel pump on a 1999-2007 Gen 1 Ford Focus for north America. The European and world versions should be very similar or identical to the procedure we performed here. Make sure to wear gloves and wear eye protection when working with gasoline.
How to Jack up Your Car Safely: • How to Safely Jack and...
If you have any questions or just want to talk about your repair head on over to: www.2carpros.com/
If you have a car question ask it completely free at www.2carpros.com/questions/new
*Disclaimer: Please use all safety precautions - ยานยนต์และพาหนะ
Next we need to check for debris @11:40 with a flashlight - totally clear flakes of debris swimming around, totally ignored. WTF? (doo doo dee doo elevator music) "Oh yes, I checked the debris - it's still going to be there too!"
Great video, but I think I may use the tinsnips under the rear seat method instead.
omg you guys are awesome that job was not easy.
thank you for the video.
Thank you for watching! It is just nuts and bolts :) take your time and it will be easy.
it is not easy it is very fiddley and very expensive on purpose.
i like how you actually show the whole process, like it's not as easy us, 'remove the evap system' there are many steps to it!
Thank you! it is very helpful!
Thanks! Yeah that's what I try to do on this channel and make it detailed as possible.
Great help. Thank you.
Thanks for watching!
It would be nice if you first showed where underneath the car all those parts are. The video starts out zoomed in on a single bolt right away.
If you can't locate the items you shouldn't be doing this job.
@@alanskylux9822your an idiot. They came for instructions dummy. Obviously they are learning. Mr master mechanic who knows all.
@@alanskylux9822then what’s the point in the term “learn”?
@@Jigan-159 learn the basics first then come back to this. This is not for beginners.
Great Video ! Top professional !
A question:regarding Focus mk1: After was parked without any issue, next day wont start...
Checked was Fue Level, Fuses, etc.
During that night can the Fuel line or Filter be blocked ?
The Motor start manually with gas in Carburetor, but stall...
Thanks!
I have to do this this weekend and after watching him endlessly fiddle fart with every tiny piece I think I may just trade the car in instead of losing my mind fighting the car for 2 days.
Just open the back seat
its under the back seat cushion.
@@mrdeleted not under the seat. İt is diffirent from other cars
Look for the fuel pump driver module under the seat, then follow the wires.
note to focus owners my 02 it's NOT needed to remove all this time consuming crap my evap system still attached (my evaporated looks like a medium size squareish box)
02-05 were about the same designs
It is not needed on the '05 either for sure.
Great video jackasses!!!! Way to show us where everything is.... Your killing it!!
Hey thanks! Means a lot, I'll keep it up! Thanks for watching!
Does this process include the 2002 focus svt??
Great video. Really clear instruction. I replaced my fuel pump a couple of weeks ago, but now sometimes my car won't start up and it's having trouble going up hills as it's not idling properly....any idea what it could be? Other days, it starts up fine but still doesn't run as smooth as before I changed the pump. Thanks!
Thank you for watching! Hmm that is a puzzle of a question. You can ask one of our Automotive experts for absolutely free at this link www.2carpros.com/questions/new I wish I could help with that but all of our experts are on our website. I just make the videos and answer the comments when I can. :)
Kevin, if you haven't fixed it already, make sure none of the lines got crimped or bent.
That is a great tip!
Thanks 2CarPros!!!!
Could of got something into the fuel line and clogged up injectors, maybe fuel pump is faulty.
How do I change the fuel filter for a 2010 ford focus Se
Hey, great video, i was looking forward to inspect my gas tank because it's leaking and it comes from above the tank, do you think it can be the pump itself or maybe the tube that sucks from the pump?
Yeah it really could be. Thanks for watching!
could even be the canister.
I have a 2000 Ford Focus ZTS, that before I got it someone must have replaced the fuel pump. and they must have not been all that mechanically inclined, and now after watching this video I can get an idea what they did. because when I try to full the tank very much it leaks the fuel from the top of the tank, from what I could see looking under the car. and the fuel gauge is not accurate, it runs out of fuel at a quarter of a tank. but now after seeing this video I can see that they possibly didn't get the seal installed right if at all. and they either bent the sending unit float rod, or got it where it's hanging up on the baffles in the tank. mine is a little bit different it has a plastic tank. I'm going drop the tank and inspect everything and check that the sending unit is operating properly. I hope they didn't destroy the seal, if they did I'm curious if a person can get the seal by it self? thanks for posting this video this gives me a better idea what to look for, and what to do on my Focus.
Does the 02 and 03 have the same pump?
sounds like an EZ and relazing job with the music
Music makes everything better! Thanks for watching Carl!
Why.....did Ford make this needless complicated?
With my 2001 Volvo V40 I could access the fuel pump via a panel under the rear seat.
I'm seriously considering taking the other approach and cutting through the top.
Not sure! But it's just time consuming. You can do it! Thank you for watching!
It makes no sense. On my Hyundai, you just pull out the back seat and fold back the carpet and you're in and out in no time. It probably saves time in manufacturing and brings the non DIY customer back to the dealer.
@@scottgm321 so true ,the main dealer want cash or card up front for diagnostic tests if car is out of warranty,this is in ireland this is 2021 and its so
Hard keep a car proper with pothholes,great comment🙏👍
i remember the not so old days when the fuel pump was on the front bottom of the engine, and you could change it in 20 minutes for 15.00 no dropping of the gas tank!
Ah back in the gold old days! My Camaro still has one! Thanks for watching!
has my ford focus deisel estate got a fuel pump the same as this one m8 its 2007 and a 1600
Maybe not the exact same unit but the process should look really similar if not the same.
What tools do I need for this ?
have a pro do it
what was the total elapsed time of this entire procedure?
It's a bit hard to say how long this exact fuel pump took. It was filmed many years ago. Not to mention setting up the filming equipment takes quite a bit of time extra. Thank you so much for watching!
Sharon Boo you cute asf Sharon 😍
@@BugattiDreams I don’t think Sharon’s interested 😳 rip king
I crashed my Ford Focus zx3 2004 I got it to run once I swapped out the fuses for the airbags and over rided the safety system , now it won’t start friend thinks it’s the fuel pump the car won’t turn over but makes noise any tips?
check the fuel pump cut off relay, on the passenger side kick board, there is a button to reset the cut off value, It triggers in case of accident and cuts power to the pump
good video, but why dismantle the fuel line clips instead of just pressing them in and releasing them?
Matrix MG I was going to say the same
I think they might be single use clamps
They can be released if you can access them, but if they are older, they might be brittle and break.
You can buy a new set of those plastic clips at the local auto parts store cheap. I think I got a bag of 6 for like 3 bucks.
can I use 2.0 fuel pump replacement for 1.6?
what does the e vamp system do
recycles un burned gas instead of venting it out into the atmosphere
Any videos on fixing my Bugatti? I got a blown head gasket and my mechanic is charging me way too much. Can you guys do a real time fix on heads for a Bugatti veron
Thanks
Sorry we really don't, we have never worked on one. Heck, I haven't even seen one in the wild, only at a car show once. Thanks for watching!
If you can afford a Bugatti you can afford to get fixed you pleb
Removing the evap seemed a bit unnecessary. Did I miss something?? Other than that thanks for the video!
the Chilton repair manual also suggest doing this.
The fact is, the pump is rather easy to get to if you remove the back seat, but the problem I have is that some moron did something to it that is not allowing me to start my car...
Now I have to figure out whats wrong.
what was the problem?
This must be a California car. Mine looks nothing like this in Ohio 😂
Yep! One benefit of living in the desert! Thanks for watching!
min 6:49 teorema de bernoulli
How do you replace the fuel pump on a 2014 Ford Focus, Thanks
2014 has an in-tank pump and a high pressure fuel pump on top of the engine. Which one?
Fuel pump on my Focus Mk1 2001. is a little different
Alright if your got all the gears but through the rear seat would be a lot easier
if you want to destroy the floor of the car, have leaks, noise, and speed up rust....sure cut a hole in the floor.
@DocHemi4268 there's plenty of manufacturers who make access panels in the rear floorboards of the seats and they don't speed up rust. Ford did this on the escort.
Can i do this on the ground
Yep! Thanks for watching!
That evap cannister looked difficult
Not too bad! Thanks for watching!
How much should I be charged for this service? I have a 2000 ford focus lx & I was quoted for $589? Watching this video makes me think they're just pulling the "women don't know" pricing lol
Well you are being given the worst price for the unit its self I can count on that. The work amount per hour differs state to state and dealer VS garage. $589 does seem steep. You could buy the fuel pump your self off of Amazon or Rockauto then just have them put it in. That way you are only paying for the labor.
Cost of genuine pump in Australia is $700 after market ones are $350ish basically your paying 2 hours labour. 20-30 mins diagnosis time plus 90 mins for the job seems about right to me.
OR someone could cut a fuel pump access from above, and do his job WHENEVER he has to, without paying huge amount of money just for all this work load, to change the pump. . . . I know many people having done so.
Hi
Hello!
Any videos for an 2010 ford focus
Sorry not as of right now. We kinda only get what comes in. But if one of those cars comes in I promise we will upload the repairs we do on it! Thank you so much for watching!
2CarPros you're awesome thank you so much!
Thank you so much for watching!
Ty great content for the diy mechanic,in man hours how long does it take a garrage,not a ford garage just a mechanic and 3 in total,like he has the car 3 working days plus the weekend ,just trying to see how long he puts for Labour and you know how long ford focus 2010 model 1.6 tdi ,if you could leave a ballpark figure in hours in a reply ,I would be grateful,liked your vid will sub and watch again when you post more ty peter
Hey Peter thanks for watching! Well mechanics typically never work on Sunday and usually a half day on Saturday. For a fuel pump R&R on that car I would ball park 3.4 hours or so depending.
figure 4 hours for DIY, less if you have a lift like these guys.
if you go cheap, you will regret it don't cut a hole in the car like some idiots I've seen do on TH-cam you could cut the tank then it will cost you even more to fix it right!
Yeah I would never cut a hole in a car just to make life slightly easier. Thanks for watching!
Expect the owner of the vehicle to complain about a buzzing noise he didn't have prior the fitting of the new pump.The possible buzzing sound is caused because you failed to transfer from the old unit to the new one,the three rubber insulating feet on the base of the old unit.These should be part of the new supplied pump but they never are,I speak from experience.
There are no feet, the pump snaps into the holder in the tank and can't move.
You forgot to replace fuel filter
This is just the pump. Thanks for watching!
No light I'm more confused coming here
The music… 🤦🏻♂️. But if you can make it past that good video
90 minutes?
That's how long the work would take with out filming. Thanks for watching!
If u have a 2002 focus the first 10 minutes is literally useless.
Why? I have a 2002 and am researching before i do anything.
Thot they emptied the fuel tank eh ? There was still alot in there
Empty it best you can, you are never going to get every drop out. Thanks for watching!
Those Delphi's are crapp.
This one has been working every single day since I did this repair all those years ago. This is my daily driver. Thanks for watching!
Lucky man! Most Delphi parts are crap right out of the box.
No, Delphi parts are used as OEM replacement on many makes. They are a good quality part. Of course, no manufacturer is perfect and you will get the occasional defective part.
Delphi parts are Oem on many many Opel cars. Bud i have seriously always had bad luck with Delphi parts. I always buy Hitachi or Ngk when it comes to replacing a Oem sensor.
@@scottykilmer3920 Scotty I'm with you 100% on the sensors. It's always best to use OEM when it comes to that. But I've used Delphi suspension and other "generic" type parts and not had any issues. So far at least. Even the geek from Two Car Pros said his fuel pump has been fine for years.
where is the fuel pump in a 2002 focus wagon
In the gas tank. Thanks for watching!
Xavia Doshay you will have to drip the tank i have the ztw to and replaced it but a "pre cut hole" from the inside under the seat someone before me had made. Othere than that its a bitch dropping the tank and doing it that way. Needless to say easy repair and way cheaper to do it yourself
Vegas Garcia I have an 02 ZTW that was built June 2002. Would you know which model fuel pump I would need?
First off 90 minutes..Not for the guys watching this. So basically if you don't have a lift, and its 105 degrees in the shade, you remove the back seat and cut a hole in the floor and don't fiddle fart around with all this BS
If I don't show every step people get mad that I left something out. I can't control the weather or if you have a lift or not, this is completely doable with jack stands. What I can tell you is there is no way to cut a hole in the car seal it back up easier than just dropping the tank. Thanks for watching!
Terrible video, doesn't say where things are that he's working on...just remove this part"...WHERE IS IT ????