FYI if panels rattle too much use 1/4" or smaller foam stripping between panel and door to muffle the rattles. Hope that helps, love the vids. Keep it up Birdy!!
If you get bored and want to play with effects, frost the acrylic and play around with etching. Either way, it's a cool diy for missing door cards in drift builds. I'm tempted to do this in my g35, but it would be a pain as my switch setup is on the door card. Keep up the great work Birdy.
Bro that is sick. I just love it. I'm in south africa and door panels especially for the coupe and vert are very scarce and pricey. Ive been struggling to fix my door panels for the longest times. This is dope. Will definitely try it out.
I would get some of that gutter material they use in between widebodys and wrap that around the edges for a cleaner look. But looks miles better than it was before! love seeing this build evolve.
You should totally use a dremal and engrave the doorcards with a design to showcase your work 👏🏽 the leds will hit it and look dope! Much love from AUS 💚
I see birdy is getting into his DIY bag, good shit brother....1 thing though bro, maybe look into fuse tappers, they're like 5 bucks at your local auto part store and they allow you to tap into your fuse box if your trying to do LED stuff, and not connect anything to your battery, i'm doing a few crazy things with LED's too, rolls royce stary headliner, and a few things, definitely try fuse taps br0other, but as always dope ass DIY, i love it, keep it up as usual bro!... #staydriven !
OK, I was skeptical at first. However, thats dope Nice job. An idea to add to this. Polish everything inside to be really shiny, then the light would reflect and bounce around in there. Just a idea
You know something Birdy it's really incredible that I've been following & subscribe to your TH-cam channel since . You put the Green and black sterring on the FRS and because of you I'm putting a NRG sterring wheel on my 96 Ford Probe
Use a propane torch and brush the flame around the edges of the plexiglass you cut and it will turn back crystal clear. called flame polishing. looks good man
On an acrylic test piece, try and see if a torch or a lighter will melt the edges a bit to make them shiny again. Idk know if it works on that stuff, but that would look clean af.
That looks really neat! I think my only concern would be that it would get scratched up. However, if you have the template, it would be really quick and dirty to make a replacement acrylic panel and swap it out. ✌
A tip when soldering: put the soldering iron on the coper cable you want to solder, let it heat up, and then put the tin on there, what you did looked like you where adding tin ontop of the cable, might be good for a lil while, but its far from strong.
Good idea to anyone, if your doorcards are busted anyways (all e36 owners) but you dont want such a stripped look, just cut a good chunk of your doorcard where theres fabric or something, slap acrilic instead and the lights too So you get a less stripped look and you get interior lighting like modern cars, bonus points if you tint the acrillic
Wowww it's cool man!! Racing look with greenlamp, nice combine!! I must try it at the home, hehe Thanks for this tips & trick, Thumbs up from Autotune Indonesia dude!
Dam I stumbled on this channel by accident then I realized you looked familiar, I used to follow your Instagram way back then when you drew pokemon and had a frz/brz!
Been watching since before the frs, and watching you makes me wanna make shit for my cbr900 just to see what i can do to it. Love the content, was one of the first subs for the L.R. youtube as well! Ggs, good luck, and stay positive.
My guy this is everything I wanted and so much more legit about to do the same thing but with speakers lots of them the led was my click bait Appreciate your video
Definitely a fan of do what you want, but as someone who works with acrylic almost daily, you do NOT want this shattering near you. Lexan or something that won't splinter would be a better choice, you can get it in clear or diffused (which would help your LED's greatly by the way).
When I was 14 I had an idea to do something similar but instead of having the lights for the inside I was going to drill holes in the door and have them shinning outside to match a sick old school tuner graphic.
Super creative idea! keep it up Birdy!! -Evan
Hello
coming from the master
First Ever - 👍
After a little more than four years serving in the marines, I’m back catching up with Birdy’s videos.
Thanks for your service! 😃
Welcome back yo ✌️😘
welcome back sir, thanks for your service.
How many crayons would one (boot) consume during a 4 year?
-USAF vet
Welcome back brother!
this is so dope, it looks like a custom PC
thats totally where i got the idea haha
you could try to add a thick weatherstripping along the edge to seal/weather proof it. Also might be a cleaner look!
Was thinking of it!! Probably will to really clean it up
thank god i found this channel👌👌
Take a torch to the edges of the plexiglass, makes it smooth and glossy . Great work
You should try to do the hood next!!!!
This dude is the king of Mickey Mousing.
🤣🤣🤣🤣🤣 omg he even takes it as a compliment, straight butchered that bmw
@@sasukeuchihaanbucapt what do you think mickey mousing means?
@@sasukeuchihaanbucapt it's a compliment, its the musical accompaniment...which is everytime on point...thats micky mousing...🙏
FYI if panels rattle too much use 1/4" or smaller foam stripping between panel and door to muffle the rattles. Hope that helps, love the vids. Keep it up Birdy!!
Definitely stealing this idea from you for my S13!
Yerrr paradox wassup
Yes!!! 2 vids this week couldn’t be any better !! Keep it up 🔥 👍!!
If you get bored and want to play with effects, frost the acrylic and play around with etching. Either way, it's a cool diy for missing door cards in drift builds. I'm tempted to do this in my g35, but it would be a pain as my switch setup is on the door card. Keep up the great work Birdy.
@11:43 That Legend of Zelda nostalgia hit hard. I love your edits
Bro that is sick. I just love it. I'm in south africa and door panels especially for the coupe and vert are very scarce and pricey. Ive been struggling to fix my door panels for the longest times. This is dope. Will definitely try it out.
Yes sir yes sir gohon is adorable keep up the great work my friend
Shame I was a bit later to this one. I do believe tho that u have a very unique design. I don’t know if anyone else has done this. Looks 🔥👍
Birdy does whatever the fuck he wants, that’s what make him unique
I would get some of that gutter material they use in between widebodys and wrap that around the edges for a cleaner look. But looks miles better than it was before!
love seeing this build evolve.
i actually thought about this! or some sponge seal thing that goes on the edge you're right!
This is some oldschool birdy vibes man. Turned out great!
agreeeed so agreeed more like this
If you're reading this, you are awesome,
Help me with that algorithm and DROP A LIKE pl0x!!! =P
birdy this...THIS RIGHT HERE. IS RAW AS HELL MAN!
No cap, those doors are so dope. Nice work young grasshopper
You should totally use a dremal and engrave the doorcards with a design to showcase your work 👏🏽 the leds will hit it and look dope! Much love from AUS 💚
I thought about this toooo let the light travel through some design mhmm
Such a dope concept especially with the added lights, this is gonna look sick
Ngl at first I didn't see it working out but looking at the final product, I kinda wanna do it now 😂 looks amazing
Let's gooo
Cool mod bro, your Lexus front bumper mod from back in the day inspired my Celica/Carolla bumper build.
sweet deal!!
@@kingsmustrise if you have time please check out the bumper we made for my son's Celica GT. th-cam.com/video/SGfTfQbwZBs/w-d-xo.html
It would look way better if you tinted them green just a light tint so you can still see the inside when you get closer to the door
Or some detailed engraving soo many possibilities...
Sick!! E30/36 door panels are a pain over time. This is a dope alternative
I see birdy is getting into his DIY bag, good shit brother....1 thing though bro, maybe look into fuse tappers, they're like 5 bucks at your local auto part store and they allow you to tap into your fuse box if your trying to do LED stuff, and not connect anything to your battery, i'm doing a few crazy things with LED's too, rolls royce stary headliner, and a few things, definitely try fuse taps br0other, but as always dope ass DIY, i love it, keep it up as usual bro!... #staydriven !
Totally good call!!!
@@kingsmustrise no problem bro!
Beside the dope idea...the video.. the cars, the Crew, lets appreciate him as a nice guy! reads every comment and leaves a heart ❤
I owe it to you guys =)
Looks sick! Now you can see the window regulator pop off the white plastic on the rail.
Was gonna save this video for tomorrow but ehhh, a late nite birdy vlog before I head to bed always hits the spot 👌🏽
Looks really cool to do it in a drift car! At night must be awesome! Love the DIY 🔥💪💪
Yess I should do at night in car pov ;)
@@kingsmustrise Oh yes you should! Just do it! 😁
Ooolala birdy back at it again! You think up some of the dopest mods. So creative, I love your work!!
its definitely the art side
@@kingsmustrise keep up the good work! Can't wait to see more!
OK, I was skeptical at first. However, thats dope
Nice job.
An idea to add to this. Polish everything inside to be really shiny, then the light would reflect and bounce around in there.
Just a idea
hey cheers
Its been awhile since I’ve watched your channel. Or anyones for that matter, but oh man I’ve missed this! Such an inspiration on any and everything!
Bro ur wild... one love man keep modding. Add some rubber around the end of the acrylic would clean it up alot
Ayy my man wearing the lzmfg hoodie
Always nice to see everyone in the car community respecting and representing each other
Roof leaks always happen in the worst spots! Good job on the door panels! Fuse that light circuit!
Clear door panels look a lot cooler than i imagined
I was thinking the same
You know something Birdy it's really incredible that I've been following & subscribe to your TH-cam channel since . You put the Green and black sterring on the FRS and because of you I'm putting a NRG sterring wheel on my 96 Ford Probe
Yay another one. From you men it’s always a thrill.
The e36 is gonna be a sick drift car for sure, also the lzmfg hoodie is sick. I got the t-shirt version of it lol
I was planning on getting rid of my door panels since there broken so i might have to try this
hell ya brotha
Turned out pretty sick! Super unique 😄
Can't wait for you guys to be able to be open and ready for everyone and now you have made me want to modify my doors like yours
When you’re into cars and PC gaming. Looks dope!
mannn I love watching birdy, he never changes n he’s hella humble 🔥🇵🇭
Always wanted to try this with my Pontiac G6 Convertible rear speaker panels. It's a big flat panel.
Bro that's actually nuts. Love the creativity!
That actually came out really clean!
this such a sick idea bro looks hella clean
Use a propane torch and brush the flame around the edges of the plexiglass you cut and it will turn back crystal clear. called flame polishing. looks good man
your car is gonna look sick when its done man, really enjoyed this video!
Thank you for making such great videos for us and saving us from quarantine boredom with your great videos Love greetings from Germany :)
thanks for watching!
Very nice idea. Now I need these on my e36. But i think, a translucent acrylic could fit better, to difuse the light.
On an acrylic test piece, try and see if a torch or a lighter will melt the edges a bit to make them shiny again. Idk know if it works on that stuff, but that would look clean af.
weight reduction and a bit of eye candy with the LED's, that is a dope idea.
Love it.. Its something really new...I hope it catches on
Dude this is such a cool idea. More like this!
Will Castro would classify this as unique🤣🤣
Love your art and your image. The concept is awesome, but the only thing that I'm thinking about is water getting in
watched the whole thing. end product looks dope!
Yeayy so early... !! the door is sick af.. keep up the good work birdy!
thank you!
daaaamn that door is ''lit'' keep up the grind
nice double pun
@@kingsmustrise thanks
Man Loving what your doing with the BMW! THOSE DOORS CAME OUT SICK! Keep it up man. Looking forward to see where this build is going. #BMWBROS 👍
a good idea! it is better to install the backlight on top because water and dust will collect at the bottom
Drill corners and then cut lines. Faster and cleaner 👍
truuuu
Dude that looks dope man, great idea
That looks really neat! I think my only concern would be that it would get scratched up. However, if you have the template, it would be really quick and dirty to make a replacement acrylic panel and swap it out. ✌
yes exactly!, or we could pwindow protection film it haha but , yes as long as we have the templte ima be real careful
@@kingsmustrise True true, protection film (slipped my mind)! Probably cheaper than replacing with another piece of acrylic.
A tip when soldering: put the soldering iron on the coper cable you want to solder, let it heat up, and then put the tin on there, what you did looked like you where adding tin ontop of the cable, might be good for a lil while, but its far from strong.
this would've helped so much. i didnt know how to get it to melt in flow haha
Bro that is fire!! I love it!
You can paint the silver or clean it up to add to ot
This is so cool, I really want to do this one day. well done birdy!!
That skusta clee music tho!! On point
im definitely stealing this idea one day, looks dope af
Good idea to anyone, if your doorcards are busted anyways (all e36 owners) but you dont want such a stripped look, just cut a good chunk of your doorcard where theres fabric or something, slap acrilic instead and the lights too
So you get a less stripped look and you get interior lighting like modern cars, bonus points if you tint the acrillic
Sand and flame polish those edges and it would look clean af. Also I work for a place that makes hooks for retail.
Door cards looking minty 🙌🏽
That's actually really nice looking 😀👍
Dude the music "ayaw kitang pilitin kung di ka pa handa" eyyy🤣💯💯💯
you should make inside of this door like a a gundam engine... idk, put some things behind the glass if you know what i mean. looks sick!
This is nice. Very creative bro!
Looks awesome, great idea!
You should decal the Plexiglas and make it backlit to hide the door frame🤔.. looks badass.. I might do🍻
Wowww it's cool man!!
Racing look with greenlamp, nice combine!!
I must try it at the home, hehe
Thanks for this tips & trick,
Thumbs up from Autotune Indonesia dude!
Dam I stumbled on this channel by accident then I realized you looked familiar, I used to follow your Instagram way back then when you drew pokemon and had a frz/brz!
still got it! welcome back
Adding this to my list, thanks birdy!
Been watching since before the frs, and watching you makes me wanna make shit for my cbr900 just to see what i can do to it. Love the content, was one of the first subs for the L.R. youtube as well! Ggs, good luck, and stay positive.
yo the fun is in the process =P
thanks for the kind words and support brotha!!
hope to see one of your projects soon
Never thought of this and it looks amazing! 🙆
You should set up some beds for those shop dogs for sure. 😎
gohan (chows) dont use beds
Awww dang I was hoping for a small shop improvement d.i.y that would have been cool. Thanks though Supbirdy sweet show
U should see if u could use the top cap or cut the top of the door panel so that the lower part is transparent and u got a place to put ur elbow
Building e36 while listening on sa susunod nalang by skusta big up to you sir. Pinoy here🔥
My guy this is everything I wanted and so much more legit about to do the same thing but with speakers lots of them the led was my click bait
Appreciate your video
That looks so awesome Birdy! Are you planning on adding some sort of seal to prevent water and condensation?
Yes probably!! Good idea
bro how u only have 250k subs you're content is fire
i appreciate that brotha, its me, i need to be more consistent!
in case anyone is wondering the song at 15:21 is (Artificial Music - And so it begins)
You have the best ideas for your cars and they always come out awesome. #inspired
Definitely a fan of do what you want, but as someone who works with acrylic almost daily, you do NOT want this shattering near you.
Lexan or something that won't splinter would be a better choice, you can get it in clear or diffused (which would help your LED's greatly by the way).
When I was 14 I had an idea to do something similar but instead of having the lights for the inside I was going to drill holes in the door and have them shinning outside to match a sick old school tuner graphic.
Dude that is so sick! Keep up to vlogs man!!