I've done clutch on my Focus 1.8tdci this summer but didn't drop the subframe as I was worried it would need aligning like Mondeo does. Took me all weekend on my drive 🤣 Fair play to you mate for lifting it up like the weights on the bench 💪👍 Great video!
Well ours has just gone 30 mins ago, thought yep gonna have a go at doing this myself but, after watching this il pay the £500 That's a lot of work and iwon't remember how it all goes back together lol Good job buddy
I've just done one of these (my own van) and now its pissing gear oil out out the bell housing . I noticed the when replacing the concentric slave that these gearboxes don't have an input shaft seal, just an o-ring on the slave. Have you ever had this problem Kevin ? Maybe I'll silicone the slave cylinder.
Hello Mr. Williams Big fan of your work, really impressive. Would you recommend how to properly bleed out hydraulic clutch on Ford Connect after install. Thanks a lot for answer. Best regards, Lasha
@@WMCSYeh I'd definitely recommend one. I'm usually the same lifting them up on my back but decided to get one and honestly I'll never go back. Was a sealey scissor style one new off ebay for £150
Wow dude you make that look sooo easy. think I might need to upgrade my tools first take a month of work and grow some balls before I try that. Only just done me wheel bearings and thought that fucker was hard haha nice job tho bro:)
Awesome work 👌 I have a ford connect 53 plate and 1st 2- gears are a bit stiff to engage also with a bit of weight in the van it struggles to pull away. Do you know a average price for a new clutch i don’t want to get ripped off....
lawrence walker in the older videos I used to focus only on the gearbox disassembly and putting back together. In the newer videos I now show the actual clutch replacement, clutch bleed and gearbox oil filler.
bloody hell, you gave my piles piles watching you lift the gear box in like that and without swearing,,,, well done that man
Man... thanks for the video you showed me what I'm in for and that's a whole lot.
I've done clutch on my Focus 1.8tdci this summer but didn't drop the subframe as I was worried it would need aligning like Mondeo does. Took me all weekend on my drive 🤣
Fair play to you mate for lifting it up like the weights on the bench 💪👍
Great video!
Well ours has just gone 30 mins ago, thought yep gonna have a go at doing this myself but, after watching this il pay the £500
That's a lot of work and iwon't remember how it all goes back together lol
Good job buddy
That feeling when the box slides back on lol
Good stuff, a confident man with a hammer.
Another great job done. As Han said to Bruce Lee in Enter the Dragon....'your skill is extraordinary' !!
That guy is amazing, top class. Earned every penny, well done mate. Enjoyed video. Best
Awesome work mate no messing about, been a while since I’ve done one of these so just catching up with your video ready for the weekend 👍🏻
You’ll manage it alright. Especially if you’ve tackled it before. 🍻🍻🍻
@@WMCS
How much money you take to do it
Old school, good job!
Amazing work! All the love brother!
You make a good job 👏🏻
Respect, on your back
That’s it mate. Thanks for the feedback
That was just brilliant. 🙏🙏🙏
great vid mate thanks
good idea taking the axel shaft out i would of removed the track rod an taken the whole shaft out your way is better
respect!
Top job pal , dont tell me the reverse light switch is under the air filter and battery . i need to test my switch
Ryan
That’s where it is 😆
Just a fantastic video top man
Thanks for the support Shaun.
Alucino con este tío.
Best !!!
I've just done one of these (my own van) and now its pissing gear oil out out the bell housing . I noticed the when replacing the concentric slave that these gearboxes don't have an input shaft seal, just an o-ring on the slave. Have you ever had this problem Kevin ? Maybe I'll silicone the slave cylinder.
It’s got the same engine as the Ford transit on the channel. Yea it needs silicone around the csc
Thanks Kevin. Looks like the box is coming back out 😢😂
Top video, fair play
🍻🍻🍻🍻
Great job buddy
Thank you.
Hello Mr. Williams
Big fan of your work, really impressive. Would you recommend how to properly bleed out hydraulic clutch on Ford Connect after install. Thanks a lot for answer.
Best regards, Lasha
Merci beaucoup pour cette vidéo.
How long does it take to fit a clutch into a ford connect van 1.8turbo
halfway through just need to drop subframe if i drop subframe as you did will i noy put it out of line???
hey kevin, did you have to bleed the clutch pedal by the end, or did it selfbleed? cheers from norway!
You have to bleed it mate
In a public car park too 😄
You not fancy getting a floor transmission jack? I got one for this job saved having to drop the subframe. Good video tho very helpful cheers
I might look into one. Never used it before. But will have to at some point.
@@WMCSYeh I'd definitely recommend one. I'm usually the same lifting them up on my back but decided to get one and honestly I'll never go back. Was a sealey scissor style one new off ebay for £150
Wow dude you make that look sooo easy. think I might need to upgrade my tools first take a month of work and grow some balls before I try that. Only just done me wheel bearings and thought that fucker was hard haha nice job tho bro:)
…on the parking…nice..
Awesome work 👌 I have a ford connect 53 plate and 1st 2- gears are a bit stiff to engage also with a bit of weight in the van it struggles to pull away. Do you know a average price for a new clutch i don’t want to get ripped off....
EcogreenDetail
Send me your full registration via www.williamsmobileclutch.co.uk
and I’ll price it up for you.
Do you ever put gearbox oil in.As we never see you do it.Great job
lawrence walker in the older videos I used to focus only on the gearbox disassembly and putting back together. In the newer videos I now show the actual clutch replacement, clutch bleed and gearbox oil filler.
Do these come with a dual mass flywheel or single ?
Solid flywheel
@@WMCS thanks mate great video btw
Price of the work only
🤲🇹🇷🤲 Ellerine sağlık maşallah 🤲🇹🇷🤲
Where can u buy diesel ford connect vans in u.s.a. ???????????????
Nothing quite like driving a diesel engine.
Really..? You can’t get them over in the US.
@@WMCS O K thanks gosh I'd REALLY LIKE TO GET ONE SOMEHOW?
2:46
how long did it take roughly?
Daniel Briscoe
No more than 5 hours.
Took me all day on floor and still didn't finish it.
cosgrove notts
Which bit did you get delayed on the most.
@@WMCS I took the Subframe out altogether. I don't work on car type vehicles, I'm a truck mechanic. I'll know better next time I thanks.
cosgrove notts
Always good to hear feedback. Take care.
What is the price of the world only beside the parts
It varies.
Kust give me price because in mechanic to do i can tel nu customers the price