I bought a Flir a few years ago and it's one of those tools that when you get one you'll always want to have at least one on you at all times. Nice work BTW. Thanks.
Great video and very well narrated! Super easy to follow. I’m new to iPhone repair and I am at present getting all the kit together to start repairing a few iPhone 5 and 6. I’m looking at DC Power Supply’s and not sure which one to purchase, also is there a table of the correct voltages I should be setting when fault finding using a thermal camera (FLIR One). Really afraid I’m going to fry the board when setting DC power. Your help with this is greatly appreciated, keep up the great work your videos are fantastic! Thanks Harry
Hi, I’m Jackson from Indonesia. Really need your help. I accidentally caused short circuit on my iPhone. It was because I disconnected the battery from logic board using metal tool and suddenly there was electric spark. I was really shock, and just put everything back together. Then press the power button, then it showed battery low, before that was around 60% i think. And then I plugged to charge it, my iPhone turned on and the battery back to normal, back to the percentage before I disassembled the battery. And just using it like normal. But I really worry that can the phone causes fire, maybe near the gas? I am worried and really need your explanation. Thank you Sir. Btw sorry for my english 😌
Great fix! Which FLIR cam are you using? Which one would you recommed buying these days? Will the android phone-connected FLIR cams do the trick as well? Thanks.
Hi, Sir u r a professional guy, i am also repairing mobile, but i have facing lot of problem when set comes with leakage, in 0.0025 amp auto, in this case i stuck, and sometimes use rosin paste, but take long time to find out the short, i like thermal camera, does it really works to find out leakage in few seconds... Kindly suggest me is it useful for me or not.... Plzzz suggest me.
Will webcam ir mod be good enough to sense the heat and act as flir camera? I guess some cameras will be more suited depending on frequency sense range.
Hey bro i lover ur video i have one question for u My iPhone 6s plus battery is draining too quickly while on standby mode and thumb print is not working can u please tell me which capacitor should i remove to make it work again?
To test a pcb board with a thermal.camera, does the pcb has to be powered on or by just connectin the charger cable without manually turning on board is enough?
Hi sir i have iPhone 6 plus the camera dose not work the problem is not in cam itself the problem is within the motherboard, by the way the flash light dose not work too, how can i fix it?
The how can i fix it question is wrong. What have you tried and what measurements have you done. You need to put some effort into troubleshooting and then ask specific questions. A quick answer to your question would be, look into the camera ic. No one can give you a straight correct answer without troubleshooting and you won't learn anything by getting direct answers :-). Start with the basics
The capacitor can be used to filter signals of different frequencies. I don't see why you would leave it out . Although you may not see any direct effect leaving it out, we do not know what issues you may run into with everyday use. Only took few minutes to replace :-).
NorthridgeFix wow, keep the good job. Another question, how do you work with only one image in the microscope. I find it very difficult control without knowing depth (stereo microscopes). doesn't it matter to you?
You see the same thing on the screen as you would on a stereo microscope. I personally do not like stereo microscopes. I'm more comfortable sitting back on my chair and working while seeing everything around me. Feels more natural, rather then have my eyes shoved in the eye piece for long hours.
Has Apple gone after them for repairing their shitty stuff like they went after Rossmann and others. And Apple will go after them for having schematics .
I bought a Flir a few years ago and it's one of those tools that when you get one you'll always want to have at least one on you at all times. Nice work BTW. Thanks.
After watching countless of his new videos I came across this gem. It is awesome to see how far he has come along. Awesome content 👏
Great video and very well narrated! Super easy to follow. I’m new to iPhone repair and I am at present getting all the kit together to start repairing a few iPhone 5 and 6. I’m looking at DC Power Supply’s and not sure which one to purchase, also is there a table of the correct voltages I should be setting when fault finding using a thermal camera (FLIR One). Really afraid I’m going to fry the board when setting DC power. Your help with this is greatly appreciated, keep up the great work your videos are fantastic! Thanks Harry
This man is a genius ad deserves recognition from Apple!
I think I have caused a long screw damage on my iPhone 6+ logic board, is this repairable?
Apple wants you to throw it away and buy a new one. They do everything possible to impede independent repairmen.
Shesch. 4years and still very informative
I have the same issue on my phone . Thanks for the video . It was really greatful .
May i know what flux you use to take off the chip. Looks very good quality.
wow, this is really advanced ! what's the model of the flir cam u're using?
amzn.to/2wxaFrW
They don't make this anymore! Any other recommendations? Thanks@@NorthridgeFix
Do you think you could feel the heat with your finger? Thanks Man, so I guess these Caps are not polarized?
yes you can also feel with your fingers
A modt exellent demo sir.well done and very clearly explained.keep up the great work.new subscriber.
Kindly where do you get the schematics from?
Old but gold
The thermal cam works like magic, how much is one?
awesome stuff that FLIR cam 😘
Hi, I’m Jackson from Indonesia. Really need your help. I accidentally caused short circuit on my iPhone. It was because I disconnected the battery from logic board using metal tool and suddenly there was electric spark. I was really shock, and just put everything back together. Then press the power button, then it showed battery low, before that was around 60% i think. And then I plugged to charge it, my iPhone turned on and the battery back to normal, back to the percentage before I disassembled the battery. And just using it like normal. But I really worry that can the phone causes fire, maybe near the gas? I am worried and really need your explanation. Thank you Sir. Btw sorry for my english 😌
Which thermal camera is best for electronic repair?
this is so genius. I wonder if apple technicians do the same guidelines.
How do you acquire the schematics and what program do you use to show you which parts are connected to the suspected issue?
Great fix!
Which FLIR cam are you using? Which one would you recommed buying these days?
Will the android phone-connected FLIR cams do the trick as well?
Thanks.
@ 10:19 thats what she said!
good i know to know about thermal camera this is amazing
Hi! Can any motherboard fault be diagnosed like this?
Hi, Sir u r a professional guy, i am also repairing mobile, but i have facing lot of problem when set comes with leakage, in 0.0025 amp auto, in this case i stuck, and sometimes use rosin paste, but take long time to find out the short, i like thermal camera, does it really works to find out leakage in few seconds... Kindly suggest me is it useful for me or not.... Plzzz suggest me.
Will webcam ir mod be good enough to sense the heat and act as flir camera? I guess some cameras will be more suited depending on frequency sense range.
Hey bro i lover ur video i have one question for u
My iPhone 6s plus battery is draining too quickly while on standby mode and thumb print is not working can u please tell me which capacitor should i remove to make it work again?
Just try getting a new battery and setup up touch ID again
Nice work
sir which flir cam do you use i mean which model ?
It's so help, thank you very much
What camera are you using?
thanks
Intresting
Great job again like always
good job bro thanks
Awesome
GOOD WORK LIKE THANKS FOR SHARING
very nice video.
To test a pcb board with a thermal.camera, does the pcb has to be powered on or by just connectin the charger cable without manually turning on board is enough?
This worked out because the board was heating up. So to utilise the method whatever makes the heat to be aquired...on or off in your case
Nice work sir
Good work
Hello , what kind exactly did you use in the video ? شكراً
amzn.to/2CQ6dKd
Which flir is this ?One 1 gen 2 gen or 3 gen
rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dflir%2Be60%2Bthermal%2Bimager%26_sacat%3D0&campid=5338440312&toolid=20008
What's the model??
Awesome ✌️✌️✌️
well done
Its 10x times we ask, what flir model?
how do i get those diagrams
Hi sir i have iPhone 6 plus the camera dose not work the problem is not in cam itself the problem is within the motherboard, by the way the flash light dose not work too, how can i fix it?
The how can i fix it question is wrong. What have you tried and what measurements have you done. You need to put some effort into troubleshooting and then ask specific questions. A quick answer to your question would be, look into the camera ic. No one can give you a straight correct answer without troubleshooting and you won't learn anything by getting direct answers :-). Start with the basics
Whats model flir?
If cap already short it doesn’t need to replace back
Just pull it off and reassembled back and good to go
The capacitor can be used to filter signals of different frequencies. I don't see why you would leave it out . Although you may not see any direct effect leaving it out, we do not know what issues you may run into with everyday use. Only took few minutes to replace :-).
@@zijiang1239 I'm sure you are better engineer than those at Apple Mr. Moron. STFU
a 6s board has the same componants
where are you from? I can't guess your accent
Born in New York, Raised in Lebanon.
NorthridgeFix wow, keep the good job. Another question, how do you work with only one image in the microscope. I find it very difficult control without knowing depth (stereo microscopes). doesn't it matter to you?
You see the same thing on the screen as you would on a stereo microscope. I personally do not like stereo microscopes. I'm more comfortable sitting back on my chair and working while seeing everything around me. Feels more natural, rather then have my eyes shoved in the eye piece for long hours.
sir i want to buy termal camera for mobile repair . can you send me this camera details and model no.
👍👍👍👍👍👍👍
Apple HATES this video.
thermal camera very expensive
top
even infant can understand what you are teaching
❤❤❤❤❤👌👍
Hello I'll like to talk to you
I can see that is ALL BLACK and the phone does not turn on... is not "all good" mister- YOU DID NOT FIX THAT PHONE
Has Apple gone after them for repairing their shitty stuff like they went after Rossmann and others. And Apple will go after them for having schematics .
Nice job