Here’s a tip on marriage: Happy wife happy life😂😂 My husband would have answered with a sure 🤷🏼♀️🤷🏼♀️ but seriously, thank you for the video. Loved the stencil idea
Thank you. We are doing a patio deck and are definitely going this way! Subscribed! I love it was nothing technical and history of ranting. Bam...this is how it is done. End of video.
Thank you soo much sir. By the way I'm learning to master "I'm beyond words of praise and slanders" to stay in tune with my wife, and she is lovely too.
Subscribing bc you are right to the point. Doing this with my kitchen and dining room and hopefully before summer is over. Thanks so much for your expertise.
the wife that was funny as hell, could not stop laughing. reminds me of mine.....being married. that technique looks cool, will have to add to my man cave.
This was the best video I've seen on this technique.... Planning on doing this soon and your color is exactly what I'm looking for...and like you, I HATE to sand........ Perfect video....liked...saved and subscribed........ God's love to you...
Correct. Use a non sanding gloss. Sanding will dim the burn marks. Also it’s subject to fading if it’s always in direct sunlight. So keep that in mind. I was slow to install blinds in my cabin and I regret that.
Not sure. The sample board is 3/4 inch. The Cabin floor is much thicker but I don’t know what kind it is. I have experimented with bunch of samples they all react to the torch pretty much the same but you may need to go slower and burn more some of them if they are slow to pick up the grain striation.
Craig Hardman yes but on some plywood it’s different on each side so one side responds to the torch better than the other. The more grain the better the response.
Very cool, and man you nailed it with that pecan stain just makes it pop. At times watching this video it was almost like I was at home, with the female interjections, don’t they have the best timing 😂 anyhow thanks for sharing
I wish I could see a picture. Any plywood works as long as it has graining. Perhaps You are holding the torch too close? Otherwise might be a overly synthetic top player. Buy small samples and test them to find the look you want
Please someone enlighten me!! At the 5:38 mark when it shows the car n the garage the tag is blurred out and I’ve also seen where people want to sell their cars they take the pics but also put the index finger up to block the tag. I’m think n uhhhh hey buddy u do realize ur riding around Chicago, L.A , Houston and all these other big cities all the time with tag visible and thousands upon thousands c or have the potential of seeing or writing ur tag # down if the chose to. To me it’s like wipe n b4 u poop smdh!!
I hate mediocre people, but I will sub because you typical wife who they don't care if you filming, working,eating, taking a dump... etc..yelled at you. They want what they want immediately.PROPS for not deleting.
Looking forward to the marriage tips 😜
Tip #1 "Don't married!"
Tip #2 "See tip #1"
😂🤣
Here’s a tip on marriage: Happy wife happy life😂😂 My husband would have answered with a sure 🤷🏼♀️🤷🏼♀️ but seriously, thank you for the video. Loved the stencil idea
Thank you. We are doing a patio deck and are definitely going this way! Subscribed! I love it was nothing technical and history of ranting. Bam...this is how it is done. End of video.
Thank you so much!
Fantastic result. Loved the wife interjections too.
Thanks! The stencil was a nice 👍 touch. Did you experience any significant warping or bowing with the plywood after the burn?
None. It’s been over a year and my floor is in great shape
Thinking about using this technique for plywood panels on cabinets
Nádhera, to by sa možno dala aj zrenovovať poškodená plávajúca podlaha alebo pôvodné parkety čo mám pod ňou.
This was pretty cool to watch. I'm looking for cheap ways to finish this cabin
Doesn’t get any cheaper! Thanks!!!
You sir are a genius.i am going to do this in my home.thanks for saving me thousands of dollars.i did subscribed.thanks.Aaron
Thanks Aaron! If the area has a lot of sunlight exposure directly on the floor go dark with torched areas because direct sunlight will cause fading
You’re adorable! Great job. That turned out amazing!!!
Thanks! Go to my channel and look at my recent video where I bike a pit bike into a mid size scrambler motorcycle.
Thank you soo much sir. By the way I'm learning to master "I'm beyond words of praise and slanders" to stay in tune with my wife, and she is lovely too.
Awesome!
Great tips and real channel dude, i subscribed right away... i like the idea of a stencil lookin into that
Thanks man!!!
Subscribing bc you are right to the point. Doing this with my kitchen and dining room and hopefully before summer is over. Thanks so much for your expertise.
Good luck with your project!
Good job with the floor.
Visita el club de los hombres oprimidos y subyugados de tu zona. 😄 👍
the wife that was funny as hell, could not stop laughing. reminds me of mine.....being married.
that technique looks cool, will have to add to my man cave.
Cool man!
Nice!! I will definitely give this a try!!
This was the best video I've seen on this technique....
Planning on doing this soon and your color is exactly what I'm looking for...and like you, I HATE to sand........
Perfect video....liked...saved and subscribed........
God's love to you...
Wow thanks!!!!!
@@mediocreman5103 No Sir....thank you
Very nice end result!
Thank you!
absolutely beautiful
Thank you!!!
Do you sand before poly. Im ready to burn but can't decide if i need to lightly sand after
I don’t sand. The poly I picked doesn’t require it
where did you find those winchester style stencils?
Hobby Lobby!!
Best part is leave me alone wife. Damnit. We all have dealt with this
Where did u get the lever gun stencil
Hobby Lobby
Do you get any black going onto light areas when you walk on it to poly. Any soot
Soot only if guy burn to black. Then brush with wire brush to get off excess soot and wipe
Did you have to sand down anything? Or just burn and stain? And gloss
No sanding. I specifically used gloss that you don’t need to sand because I hate sanding.
@@mediocreman5103 so if you use a gloss after staining, you won't need to necessarily sand?
Correct. Use a non sanding gloss. Sanding will dim the burn marks. Also it’s subject to fading if it’s always in direct sunlight. So keep that in mind. I was slow to install blinds in my cabin and I regret that.
I'm using the same poly on my plywood but keep getting bubbles that dry. Looks terrible. How do you keep the bubbles out of yours?
I didn’t get bubbles. Are you rolling it on? If so it might be too rough of a roller.
@@mediocreman5103 I'm using the same rollers that work for me on several sheets already. Next time I'll try with some foam rollers.
Looking good Mate.
We from down under have the same problems with the ah partners in our life.
Thanks buddy!
Looks great. What kind of plywood is that?
Not sure. The sample board is 3/4 inch. The Cabin floor is much thicker but I don’t know what kind it is. I have experimented with bunch of samples they all react to the torch pretty much the same but you may need to go slower and burn more some of them if they are slow to pick up the grain striation.
@@mediocreman5103 I want to use plywood for wardrobe doors is this just cheap standard plywood?
Craig Hardman yes but on some plywood it’s different on each side so one side responds to the torch better than the other. The more grain the better the response.
Are you going to do a video on how you put the floor down?
The floor ion theory is the plywood subfloor. This is a solution for when you don’t want to add a hardwood floor or carpet over the plywood.
Very cool, and man you nailed it with that pecan stain just makes it pop. At times watching this video it was almost like I was at home, with the female interjections, don’t they have the best timing 😂 anyhow thanks for sharing
Thanks! Pecan is my go to stain for almost everything. They are very supportive before you marry them!
Ikr? I thought for a moment It was me and my wife 🤣
Women!
Great work . I love this 😊Im from Germany I cant find this Collor . Can you help me please ?
Its called Pecan there are many brands with a similar Color you just need ri test some samples
My wife and I have similar conversations lol!
What can I say…the girl don’t like fumes!
How’s the smell and smoke? Is the smell like bonfire smell or more mad.
Not much of a smell. More smell from stain and lacquer than the burn
That golden pecan makes it pop. I like this!
It’s my go to stain color
Looks great
Marriage tips hahaha love it
Thank you! Prenup
That's a small pee can you got there :-) JK. great idea w the stenciling.
Where is it going?
That was just a sample-used it as a ramp for my dirt bike jump
PLEASE HELP..the plywood I have tried this on, just burnt evenly ALL OVER! Which is the best type? Wayne
I wish I could see a picture. Any plywood works as long as it has graining. Perhaps You are holding the torch too close? Otherwise might be a overly synthetic top player. Buy small samples and test them to find the look you want
i know little so take this lightly, but hardwood isn't as good as softwood. some hardwoods are worse. may look into that.
Women..... Thanks for the video Dude
You have no idea!
Good job I love it
Thanks!!
Hes like ive got some marriage tips later haha
Can I shut the garage door, yes I know you're filming, but I really just want to sit in this room and I'm not willing to move.... LOL OMG
Yup!!
I was wondering if i could do this... And... Well... I guess if YOU can do it... 🤷♀️
Exactly!
Awesome
Thanks!
I’m just here for the comments 🤣
Very cool leave me alone , my hero
Thanks!
You had me at the porn bumper music but now I’m waiting for the mediocre marriage advice.
I am glad you enjoyed the Moose-ic!
Wood make a great accent wall
Agreed!
Please someone enlighten me!! At the 5:38 mark when it shows the car n the garage the tag is blurred out and I’ve also seen where people want to sell their cars they take the pics but also put the index finger up to block the tag. I’m think n uhhhh hey buddy u do realize ur riding around Chicago, L.A , Houston and all these other big cities all the time with tag visible and thousands upon thousands c or have the potential of seeing or writing ur tag # down if the chose to. To me it’s like wipe n b4 u poop smdh!!
Totally agree.
Let the poor guy make his video lol!
Right?
"By God, if I weren't in the middle of this dang video..." 👏🗯
Haha
Yea ask your wife first
Bahahahaha he’s filming get outta here lmao
Sometimes I laugh when I watch it.....other times I get pissed off.
I hate mediocre people, but I will sub because you typical wife who they don't care if you filming, working,eating, taking a dump... etc..yelled at you. They want
what they want immediately.PROPS for not deleting.
Haha well what can I say. I’m building a log cabin steam sauna and there will be some Shou sugi ban and other good stuff. Thanks for the sub!
Yea she needs to stay in her lane! Dude!!!
Women eh ffs, nice job bud
Tips about marriage:
There's really only one tip - DO NOT GET MARRIED! DON'T DO IT, KIDS! JUST DON'T.
Should've gave her the old, "ah shut the hell up!" I gave a thumbs up, just for being an Alpha male. 😂😂😂
In the old movies they added taking your hand and pushing her face as you said, "ah shut the hell up!".
Not a supporting wife.