good video mate thank you.. Is the thread on this upgrade shafts the same thickness/diameter as the stock ones? as I need some the same diameter to guarantee they slide through my beadlock rim holes as the last lot I got did not.. and your links not working bud.. all the best, marc
No problem I’ll look into that leak yes they seem to be the same diameter as the old ones didn’t seem to have a problem with anything fitting. However I can measure them if I can find them I recently took them off as I did a more scale build with this truck and they were actually causing a rubbing problem on the front I did leave the rear on because it being a little water helps but on my defender I did run and some clearance issues in the front.
@@LargeeeScaleLife no worries mate thanks for your reply.. don’t worry about measuring them, I can’t find uk stock anyway but did find some similar fastrax ones but you use them with extended hex hub nuts instead of the rollers, I’ll give those a try 👍
Little sidenote you may have to move your front bumper out I actually ran into some rubbing issues so on my older body are clearance it a little bit on the newest scale body a bill I left the rear extensions on put the factory fronts back in for clearance issues
Make sure you have your spacers in the back make sure everything is seated seated properly on the portal cover that’s the only thing I can say remember that only one side of the hex is threaded
I’m not even driving me this video are you talking about a different video? 99% of the time I run this in low gear most of the time I run it and crawl mode sometime in Trail mode if I don’t need as much engine brake
For me this is the best crawler that excists :)
You dont have to take the whole portal off,you only have to take off the front portal housing
Just got these and one of them snapped after the first use. I'm hoping that hot racing goes good for it.
My treal stub holes for the pins were off center Making the pin not seat.
Where did you get all the parts for this axel extension ? appreciate the video man.
good video mate thank you.. Is the thread on this upgrade shafts the same thickness/diameter as the stock ones?
as I need some the same diameter to guarantee they slide through my beadlock rim holes as the last lot I got did not..
and your links not working bud..
all the best, marc
No problem I’ll look into that leak yes they seem to be the same diameter as the old ones didn’t seem to have a problem with anything fitting. However I can measure them if I can find them I recently took them off as I did a more scale build with this truck and they were actually causing a rubbing problem on the front I did leave the rear on because it being a little water helps but on my defender I did run and some clearance issues in the front.
@@LargeeeScaleLife no worries mate thanks for your reply.. don’t worry about measuring them, I can’t find uk stock anyway but did find some similar fastrax ones but you use them with extended hex hub nuts instead of the rollers, I’ll give those a try 👍
Thank you for this. very helpful!
Little sidenote you may have to move your front bumper out I actually ran into some rubbing issues so on my older body are clearance it a little bit on the newest scale body a bill I left the rear extensions on put the factory fronts back in for clearance issues
Nice.m Vid Bro! Where did you get that work mat from?
Liked and subbed.
Awesome brother..looks great 💯💯💯👊👊👍
Appreciate it lots more goodness for this thing coming soon
My grub screw holes aren’t lineing up
Make sure you have your spacers in the back make sure everything is seated seated properly on the portal cover that’s the only thing I can say remember that only one side of the hex is threaded
@@LargeeeScaleLife yea I got the wrong ones
LOOKS GREAT BUD 🤙🤙🤙🤙🤙🤙🤙🤙🤙
Nice mod 👌😎
There’s no way u have that in crawl mode lol I have mine in crawler mode and I can Bearly spin it
I’m not even driving me this video are you talking about a different video? 99% of the time I run this in low gear most of the time I run it and crawl mode sometime in Trail mode if I don’t need as much engine brake
I meant with my fingers with the wheel. in crawl mode I can’t turn it was it in crawl mode when you were spiffing it
Spinning
@@Yacht5.56 no at that point I probably had it in trail mode unless I’m really rock crawling I run it with the less aggressive engine break
@@LargeeeScaleLife oh ok