2010 Honda Accord Valve Cover Gasket Replacement (STEP BY STEP) Mobile Mechanic
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- 2010 Honda Accord Crosstour Needed Valve Cover Gaskets, We replaced them in this video. This video is meant to provide good detail on how to perform the job yourself.
Business inquiries Email - Brakebossllc@gmail.com
![ออกพรรษาน้ำตาหล่น - แอน อรดี [OFFICIAL MV]](http://i.ytimg.com/vi/PFZtOcY9ONA/mqdefault.jpg)
![[TH] 2024 PMSL SEA W2D1 | Fall | ต่อเนื่อง ในสัปดาห์สอง](http://i.ytimg.com/vi/ElcO9uC_Dbk/mqdefault.jpg)
I think you can leave throttle body hoses connected and just move it aside once it's unbolted so don't have to worry about coolant. Make sure to put sealant on the junction where to bent part going down, touches the head since there are two difference mated surfaces there. You can see the spot in front of rear cover I'm talking about when looking at 33:10.
Thank you for the suggestions, i will pin this to help others as well. Be well.
I have to say, this is one of the best videos for this I’ve seen. I was able to watch this and get an idea of what I needed to do to get these covers off and change my spark seals and valve cover gaskets. Thank you!
I would love to see some more of these videos working on a v6 accord. I own a 2010 and it was leaking oil into spark well three and causing a misfire.
Thank you for watching, i will make more videos once i get to work on some
Do I have to remove the intake manifold if I want to replace just the front gasket?
so at 23:20 you discover the aluminum material to be damged but you just covered it up with the gasket. I just bought a brand new valve cover because I saw the same thing on my car. Should I have just ignored the damaged holes?
If its damaged beyond repair where it cant hold the gasket in the proper thing to do is replace it, this customer just wanted it done so it could last him some time, so he declined new covers
Hey man, just wondering what torque spec you used for the valve cover bolts
9 ftlbs
Great video! Do you have one for the front spool valve?
No unfortunately i do not have one yet…
Hey do you have a video replacing the timing belt of a car like this ? Also where are you located
I do not have a video on a car like this, i am located in Hackettstown NJ.
Any video replacing the vvt solonoid in the back ?
I do not have a video on that yet.
Why must you take the throttle body off just to take the intake manifold out??? After taking the coolant lines off the manifold and throttle body should come off together. Just sounds like a waste of a gasket to me.
This is a guide, you do it as you wish
How much would a shop charge to replace hood struts
.?....
Most will likely do it for free, other than cost of parts. $30-50 estimate
price
400 labor if you kno a mechanic doing work on the side, 600-700 @ mom & pop shop , if dealership.. just hand them a blank check 😂
MA area..
Not trying hate but why wouldn't you replace the whole entire part if I was the customer I would pay you and not give you the extra change since you didn't want to give me the extra part 😂😂😂😅
What are you talking about?
@@brakeboss with the struts that clamp that goes into the hood you didn't want to replace that with the brand new one 🤣🤣😂