I have no idea how this is a thing when unlike their fpv drone the batteries don't have their own firmware. I tried to test it but, the charging hub check battery charge gets triggered just bouncing around in there occasionally and that resets the timer from my understanding.
I don't know why, but the pause to remove had me howling. Why can't EE's make batteries, that when full, stop taking charge? Doesn't seem like it's on par with fusion.
Every now and then you run into a straightforward, useful video on a specific subject that doesn't include all the hype and BS. This isn't one of them.
The fact that it is one of my most popular and liked videos seems to counter your view? Every now and then you run into a straightforward, constructive comment on a specific subject that doesn't include all the hype and BS. This isn't one of them.
My mini 2 just arrived today and the first thing I did was charge all the batteries in prep for tomorrow’s maiden flight. Jumped into bed, watched this video then proceeded to remove all the batteries from the hub. Glad I found this video. 😁
Ha ha thanks for that and sorry I disturbed your sleep! I think you'd have been fine but hey, better safe than sorry right? Enjoy the Mini 2, it is, hands down, SUCH a good drone - as I have said many times, the technology you get in this drone for the money is nothing short of unbelievable. Let me know how you get on!! 👍😊
I was in a panic when I watched this video but then I discovered that the batteries do actually discharge on their own while in the charging hub. All my batteries have dropped to 70% in a week after fully charged. It’s possible that DJI made some changes since you released this video. But thanks for bringing this to my attention
Hey no problem gonefishn - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Thank you for watching, and for the feedback! Yes I have had a couple of comments about the sound effects - I was just trying to switch things up a bit but it appears I have overdone it 😬- definitely a learning for future videos - thank you 🙏😊
I agree. I stumbled upon this channel the other day and it's a little gem that seems massively under-subscribed in my opinion as your content is clean/smooth, easy to listen to but regards the sounds, one or two is OK but that's about it.
@@whothefcukrmutd2008 Oh wow thank you so much for your support! Yes I am hearing everyone loud and clear about the sound effects - well noted. Thank you for the kind way you expressed your feedback :-)
1. Don't store your batteries in the charging hub or the drone 2. You can use Mini 2 and Mini batteries in each drone, BUT the Mini 2 with a Mini battery will NOT be less than 249 grams because the battery is heavier 3.Use the hub to charge something like your phone to discharge the batteries to between 50-60% as recommended by DJI for storage until you charge for use 4. Mini batteries are a bit cheaper to purchase spares for either.
@@nicsa1073 That's not fair. This is information that may be common knowledge to some but is still unknown to others. Even though he is a bit dramatic about how quickly things can go south, I believe he is spot on. I have used LiPo batteries with airplanes for 10 years, those did not have management boards but would puff if left at 100% for extended periods od time. Be nice Bro.... or Sis 😀
I've just removed my 2 spare batteries from the hub thanks to this video. I can't get the battery out of the drone at the moment as it's stuck 100ft up a tree. But that's a whole other story and we're working on it!!!
Oh wow that sounds like quite a story!! By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
used to this already due to flying fpv quads with non smart lipo batteries. Was actually suprised the DJI batteries discharge themselves to storage levels which is pretty convenient. Nice to know they need to be out of the charger to do this I did not know that.
Hey no problem AndrewF - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Instead of turning around the batteries in the hub, I bought a small Lipo battery storage bag. Allows auto discharge and small enough to fit inside Mini 2 bag. Bag is fireproof so useful for airline holiday flights when we eventually get back to normal holidays!
First of all congratulations for the video... what I understand is... that once they are 100% loaded in the HUB... you can use the HUB to load them, but once loaded, remove them from the HUB compartment and store them for example in a BACKPACK or BAG that can store the batteries? I can't wait and thank you in advance
Hey no problem WebTV Host Itatiba Web - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Yes, this problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Glad I stumbled across this 3 days after getting my DJI Mini SE with Fly more kit! Today's the first day I'm not using it. Thanks! You'd think they'd be able to put this in the manual.
Hey no problem michael dique - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
I have seen this tip before and tested my three batteries by charging and then leaving in the hub. Results is each battery discharges 2% per 24 hours so I am confident my batteries will stay in good shape still leaving in the hub. Some may be having firmware issues..
Thanks a lot for this! This is something that should be mentioned in the store for first time DJI drone buyers (and previous owners who never read the manual).
Hey no problem Patrick Jerome Obaldo - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Hey no problem @Zero6BravoZ6B - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
It’s important to know Lipos also hate being stored at low voltage. So you don’t want to leave your batteries discharged after you’re done flying especially if it will be a while until you fly again. They like to be mid charge in that 40-60% range you mentioned. You also want to store them in moderate temperature environments. Lipos are awesome but they’re also pretty dangerous if people don’t know the basics.
Wish if i came across this video few months back, could have saved one of my batteries from DJI MINI 2 Fly more combo pack. Left Fully charged all 3 batteries in hub, now 1 battery doesn't charge at all. However, after going through this video feeling luck, other 2 survived. Thanks for video.
Hey no problem Chanchal Koshyari - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Extremely useful information, Thank You Don't Panic! My understanding of LiPo batteries is that, yes you need to store them somewhere in the 50-60% range when they will be not used for extended periods of time, like several months. I fly 3 or 4 times a week but never know when that opportunity might arise. Keeping the batteries stored at 100% for days or even a couple of weeks at a time should not hurt them or make them puffy. If I know for sure that I will not fly for a couple of weeks or longer, I will drop the charge to 50%. I have followed this rule and have had my batteries for almost 2 years with little or no loss of flight time or performance. Plus the cost of a new battery is minimal, I would risk damage to have batteries ready to go and not miss a chance. I was lucky enough to catch a coyote killing a goose because I had fully charged batteries ready to go. Namaste Bitches!
This problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Good advice in the video. Over the last few years I use a Yx charging hub for my DJI SE and DLI Mini 4k and my batteries (5) have not exhibited this problem.
I bought it yesterday... I had charged it Fully and packed it to be ready for flight. Right now I watched your video before sleeping then jumped off and took them off and scattered them inside bag.😂😂😂 I hope they must be surprised.😂
Ha ha good work! I have seen some message from people saying that their batteries are discharging in their drone and charger. However DJI have recognised it is a problem so I would say better to be safe than sorry. Enjoy the Mini 2! It is an amazing little drone!!!
@@GetBusyLiving right . but can we still put discharged battery inside hub? I have another issue like not getting satellites signal for gps. May be I was flying indoors.
@@LittleSteps000 Yes you can put a discharged battery in the hub. The issue was/is with a fully charged battery in the hub and not discharging properly and therefore risking the chance of it not discharging, and then swelling and/or damaging itself. As for your satellites yes, it probably was because you were flying indoors, the drone needs clear line of sight to the sky.
I love how you made me stop my semi truck to pause right away and pull my batteries from the charging hub and drone! I felt inside of me that it was probably not a good idea, thank you!!!!! Hahahahaha awesome
Ha ha ha that's classic - I love that! Hey by the way, this problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Great video. These batteries aren't cheap but unfortunately I already learned this the hard way. You would think paying $700-$3000 that the company would have said something in the booklet or even the sales people but no. I'm not knocking there products. i love my Mavic but after seeing this video I wanted to thank you. This will save a lot of headaches and frustration for many people
Hey no problem George Edward - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
I tossed in foam inserts so I can use them as a storage case and not worry about the battery issues like swelling or whatever. I can pop them out anytime and use it as a charger again. I ended up spending $40 bucks where I can charge all 3 or 4 at once. I so far haven’t needed to use it after I went through all 3 batteries and still need to get back in the air. Loving my Mini 2. I hope by Black Friday I can maybe buy the Air 2s and getting it on a sweet deal. “Crossing Fingers”
I'm no technical expert mate, but apparently it's not good for the overall life of the battery. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Another tip: buy a quick charge power bank. I use mine to discharge batteries into when I want to bring the charge down, and then to top them back up on the go. Means you don't have to wait at home while they charge.
@@GetBusyLiving brilliant! If you get one with a double output (I have one with USB C power delivery and standard USB with quick charge 3.0) you can actually charge two batteries simultaneously on the way to your location. One in the hub and one in the drone. If you choose your case carefully you can have it all plugged in charging while you are walking. It's one reason why I'm hesitant to upgrade from the Mini 2 as I don't think I could do without this option now!
You are so so right Sir , I learned that the hard way and I don't ever do that again , I just spent 5 or 6 hundred dollars to get just three batteries because I was doing that same thing , charging batteries and leaving them till when ever I go out to fly and that could be sometimes a week or so later , not good at all . Big mistake . I had to Subscribe to you cause You had me Cracking up when You waited for the Viewers to go and take their Batteries out the charger hahahahaaaa, love it , that is what you call an honest and caring Reviewer , thanks and take care .
Thank you for your comments mate, I appreciate that ! By the way, not sure if you know, they have sent an updated firmware fix - check out my update here th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Turning batteries round puts to much stress on the hub sides I think, I pop a penny under each battery in the charging hub when not getting used for a while,works for me👍
Yes after trying that myself I tend to agree. I've ended up just putting them in normally but not pushing all the way in. I do need some sort of buffer/pad though, that's a good idea.
@@AquaTech225 Good news! You don't even have to do that ay more - a firmware fix has been released - check out my quick update video here 👍 th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Ha ha good to hear you're a man of action Jed Santos - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Haven't used mine in 3 months and they discharged and went into hibernation. They were stored in the hub. But after learning about this I'll start leaving them like that to be safe. Thanks for this video. Keep on top of firmware updates for older batteries.
I am not going to obsess over this. I don’t want to leave the batteries partially discharged, as that stops going out flying on impulse - but what I will do is turn the batteries around in charging hub once charged, so they can slightly discharge if left. In actual fact I usually fly my Mini 2 at least 3-4 times a week, so it is usually only a couple days before I will be using again anyway
I wish I saw this video several months back. Down 2 batteries left in hub for almost a year. Lesson learned. Take notes people he knows what he's talking about.
Hey no problem Gamer_Guts - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Waiting 5 days to discharge my batteries really annoys me. I hadn't thought about using the usb to slowly discharge the hub with my cell phone. Great idea. Also, seating them backwards is another great idea. I love my mini 2 and even bought 4 extra batteries for the future. I also have the Mavic Air 1. I learned the hard way as I flew it so much that I wore out all three batteries over one year of constant flying. So this time I'm paying attention to the maintenance of all my drone batteries. It is very difficult to find Mavic Air 1 batteries because it's already considered outdated by DJI and I don't think they make them anymore. This leads me to one other good idea. Buy extra batteries. There is no point in buying an expensive drone if you ware out your batteries and can't get new ones. DJI kicks out drones so fast that they often discontinue support once your drone is a couple years old. These are all intelligent flight batteries. Your drone will not fly with substitute batteries. So in order to stay in the air, keep some new batteries in storage or get used to buying new drones about once a year.
Hey thanks for the amazing response! That's a good point actually, might as well buy some more batteries to help future proof yourself - at the end of the day it's a relatively small investment. 👍👍 Thanks for tuning in and for sharing your thoughts! 🙏
Hi I just have a couple of questions I’m hoping you can answer them. if you’re not gonna use it for let’s say like five days do you still need to discharge them and if you’re not gonna use them for five days, can you leave them at 100%? 2nd to last question, can you charge the batteries overnight? Last question, can you charge the controller and the batteries at the same time? or when the batteries are done, does it automatically switch over to the controller? Does it use the battery power or the power from the wall? And can you leave the controller and batteries overnight to or just the batteries?
A couple!? Ha ha . It's not the end of the world but just charge them prior to you thinking you will use them. Ie if you're not going to use for 5 days then charge the day before. Otherwise they will discharge a bit and you will have to charge them up again anyway. Yes you can charge overnight (but I wouldn't) - the battery's system will manage the flow and slow it to a trickle but better to to charge and pull off. Yes you can charge the batteries and controller at the same time (you'd need separate plugs/charges anyway wouldn't you?) Not sure I understand your second to last question?
You can store the batteries as normal in the hub, and not push them all the way in. That way they can discharge, and if you need to charge them just push them in all the way.
but how should that work, if charging hub, is going to charge the batteries from the most charged to the least charged? You must therefore need to remove each battery and load your phone, than change again...is quite annoying
Wow a great way to get a bowel movement this morning, I just purchased a Mini 2 and yes went ok lets charge everything , standard habit as We have Mav Pro's at work and the standard procedure once back to base charge everything, Bonus tip was using the charger as a battery bank - way cool
Ha ha that made me laugh mate. The good news is they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Hi mate thanks a lot, I just this drone today it’s my very first one. I got too excited and forgot to buy the combo package so my charger with 2 more batteries and memory card are on the way. I’m still having a lot of without them, it’s such an easy thing to fly, loving it!
Hey no problem 36minutesAgo - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Ha ha good work! No worries at all! I have seen some message from people saying that their batteries are discharging in their drone and charger. However DJI have recognised it is a problem so I would say better to be safe than sorry. 😁
Hey no problem sinout044 - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Very cool info. I’ve heard this on a couple other channels but it wasn’t explained in this way. Nicely done. New sub here. Lol. God bless and stay safe. Kevin
Hey no problem dylan haney - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
It's better to just charge your batteries up to 60% after use, rather than fully. You don't even need to think about auto discharging then. Also, you are wasting charge because that extra 40% you don't need is a wasted part-charge cycle, and lipos have a finite number. On the flip side, if you do fully charge the batteries but end up cancelling your flight, just use the hub to manually discharge them back down. However, I don't agree with your advice to leave them discharged until just before you fly. It's bad for them too. Top them up to 60% for storage.
Hi there - yes I agree, you raised some good points. Sorry if I wasn't clear in the video, I wasn't meaning leaving them FULLY discharged until needing them, only down at around the 50-60% level.
Thanks for that Peter Stolee! No the controller battery is a different type of battery so no issues there. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Thanks for your video. I bought my mini 2 last year and almost always leave the batteries in the charging hub. I noticed that the batteries were not fully charged when I use them in the drone. At max around 95% but sometimes even less. I now understand that it's the discharging function. But it also happens when I leave them in the charging hub. It's maybe an update from DJI...
Hi mate - yes this problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Thank you so much - I appreciate that! 😊 I love Germany - I would go every year with my job until the pandemic hit, hopefully I can do that again soon!
Good evening I know this is off topic but I value your opinion greatly. I’m going to buy a mini 2 you think I’m better off buy new or used? It’s about 100 dollar difference. Would be buying from eBay.
If it is refurbished by a genuine retailer then should be ok, otherwise you run the risk if there is damage to the drone that the seller is either not aware of or not disclosing. Honestly for $100 I would just buy new.
I contacted dji about this. They said if your batteries are discharged to around 70 percent then they may be stored in the hub. After all they do ship the batteries in the hub. And who knows how long they sit at a retail store. It's not as if people are dropping hundreds of dollars everyday on drones or equipment.
Hey no problem Tango Down - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
I'm a bit worried as I operate my dji mavic mini with batteries in the hub since half a year now. I just don't know if this problem also applies to it.
Yes I believe you can. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Thanks Toob41, I appreciate that! 😊 By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Thanks! It's just a USB - A to USB-C. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Having two charging hubs with six batteries, they are the ultimate phone chargers when out and about, best part of three full charges per hub. Perfect for camping.
Ha ha that's classic Bayawan Bob - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Thank you for the video. Just got my NEO today and was wondering how to store the batteries. Ie. Charged or discarded. Thank you for the answer and Happy Flying 😊
Excellent content and delivery by you! I like the way you support your statements with external references to other sources of information. Thanks for the great information and keep up the good work!
This is the most useful movie about the DJI drones. Thanks a lot! :) However I'm wondering is the newest firmware update for Mini 2 is working well. And how it exactly works because the current user manual may be not be up to date.
Hey no problem domin45670 - I'm glad you found it helpful! 👍 Thanks for watching! 🙏 As far as I can see the update has worked fine. There are quite a few videos out now where people step through everything in detail so have a look around and you will find some useful ones 👍
Thanks bluerocker27 I appreciate that! By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
RC planes and heli's use LIPO batteries and it is recommended to store them at 3.8 volts per cell, roughly 30% charge. Most chargers sold for LIPO's have a built in feature that will either charge or discharge to this level automatically. I have been doing this for years now and will store my Mini 2 batteries at 30%.
Yes that's true mate, and good on you - you obviously know your stuff. By the way, in case you didn't hear that DJI have released a firmware fix - I have made an update video here th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers!
Thanks for the information boss very helpful 🤟 didn't know that about the batteries I instantly went and took them out of my charger hub just slid them out and put a hairband around them
Hey no problem michael tucker - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Yes, the mini batteries weigh more, but the mini 2 weighs less, so you should be under 250g. By my scales, the mini 2 with mini 2 battery weighs 232g. I know it's advertised 249, but it isn't really.
@@GetBusyLiving Not really, I think the reason is Japan has a 200g limit, so putting in a half sized battery they stay under 200g. Something like that.
Hey no problem Thargor - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
That's awesome mate, I'm glad I could help! By the way, regarding this video, DJI have released a firmware fix, you can check out the details in my follow up video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Hey no problem T T - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
It bugs me this is no popular opinion. I've been studying lipo, and liion for a few years now and while its not optimal to store your cells at 100 soc, it's not nearly as bad as storing them at 0 soc. When stored at either extreme end of the spectrum, the cells begin to develop what are called dendrites. Which is small metal spikes that build off the cathode and anode. When these spikes pierce the dielectric separating the two a soft short circuit can occur, greatly reducing all usable parameters of the cell except weight. I'd be very curious to see two identical cells stored side by side in exact same process except soc.
Yes you are right it is bad storing them at no charge as well. Finicky little buggers aren't they!? 🤣 Many thanks for your detailed explanations - very interesting! 👍
Hey no problem BKNativeNYC - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Thanks! I appreciate that! 🙏 Yes, the principle here is that the batteries are designed to auto discharge when they are full, as they do not 'like' being stored fully charged, however some users are finding that when they are fully charged and stored in the hub (even though the hub is not plugged in), the batteries are not auto discharging. Over time this can cause some damage to the batteries. Best not to store fully charged (or fully discharged (they don't like that either) at all. Hope that clarifies for you 👍
Hoping to hope a drone soon 😕, but I'm getting to know the do's and don't of the drone. This is a super good channel, I'm subscribing, like all the videos I'll be watching and put all I learn to use once I got a drone. Thanks
Hey no problem Perry Pelican - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
This is one of the first things you learn when using lipos in RC cars, planes and helicopters. I use my batteries and then storage charge them to 3.8V per cell. The chargers I use are far more complicated that dji's chargers so that you can properly maintain them.
Very sensible advice mate! Hey by the way, this problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
"Use the official DJI charger"... Yeah right. That doesn't even sell in Sweden and comes with the wrong plug if I wanted to order from abroad. Stuck having no clue which charger to use. Lol. Great video btw. Super useful! (not sarcasm) haha
Just got my DJI mini SE today and have been charging the batteries in the dock. Just had a sudden thought which made me find your video. When one battery is fully charged and the dock has started charging the next, should I take the fully charged battery out of the dock?
No you can leave it in now. It's all fixed. Hey no problem Skye Tati - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Hey no problem @Twistedstar0320 - No the controller is different. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Hey no problem ROD ONE JOURNEY - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Thanks for the video; very informative as always. I am unable to turn the batteries around on my Mini2 changer (does not fit backward), so I use a large rubber band instead around the 3 batteries. This keeps them from dropping into the charger's connectors.
Hey no problem Martin Dudemaine - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Great tips, 🙏🏼 . Had my Mini 2 for two weeks now. I’m off upstairs to remove the batteries I fully charged last night after flying 😱 Now subscribed 👍🏼😁 Edit: Phew 😥 Just seen the video about the firmware update 😁
Hey no problem blissmogu - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Interesting, my original mavic lets you set how many days until it goes into storage mode. Seems like newer models don't have this. Maybe the mavic itself controls that whereas now the batteries do it. Certainly storage mode worked fine with the battery in the mavic. Good to know that I can't expect the same on minis
After a flight, I always recharge my batteries because I never know how soon I'll fly again, but I never leave a battery in the Drone always in my DJI charging bay, but moving forward I'll just leave all three batteries out with no type of connection to them. Great tip and warning video. 👍🏽💯
Noted! 🤣 By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Hey Alexander M you're very welcome! Thanks for watching, and for taking the time to comment! 🙏👍 You're the first person that liked the sound effects - most didn't ha ha 🤣 I was just trying to mix things up a little bit and have some fun 😊
There’s a lot of talk about the intelligent batteries and the charging hub. Two questions: if I simply store them out of the hub or drone, will the auto discharge feature be adequate or do they need to be discharged manually? Secondly, do I need to worry about the battery in the remote controller…Is it ok to store the controller for a period of time with a full charge?
Yes they will auto discharge, and no, you don't need to worry about the remote controller, it's a different type of battery. Also, not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html Cheers! 👍
Hey team - DJI have released a firmware fix for this issue - check out my update video here th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Noob
I have no idea how this is a thing when unlike their fpv drone the batteries don't have their own firmware. I tried to test it but, the charging hub check battery charge gets triggered just bouncing around in there occasionally and that resets the timer from my understanding.
I don't know why, but the pause to remove had me howling.
Why can't EE's make batteries, that when full, stop taking charge? Doesn't seem like it's on par with fusion.
How do my batteries use the firmware to fix? Do I need to plug the batteries into the controller? Thanks!
Thanks for this original video and for the update!
Every now and then you run into a straightforward, useful video on a specific subject that doesn't include all the hype and BS.
This isn't one of them.
The fact that it is one of my most popular and liked videos seems to counter your view? Every now and then you run into a straightforward, constructive comment on a specific subject that doesn't include all the hype and BS.
This isn't one of them.
My mini 2 just arrived today and the first thing I did was charge all the batteries in prep for tomorrow’s maiden flight. Jumped into bed, watched this video then proceeded to remove all the batteries from the hub. Glad I found this video. 😁
Ha ha thanks for that and sorry I disturbed your sleep! I think you'd have been fine but hey, better safe than sorry right? Enjoy the Mini 2, it is, hands down, SUCH a good drone - as I have said many times, the technology you get in this drone for the money is nothing short of unbelievable. Let me know how you get on!! 👍😊
You can still keep them in the hub, just don't click them in 100% until you are ready to charge them.
I was in a panic when I watched this video but then I discovered that the batteries do actually discharge on their own while in the charging hub. All my batteries have dropped to 70% in a week after fully charged. It’s possible that DJI made some changes since you released this video. But thanks for bringing this to my attention
Youare correct, they updated the firmware
Hey no problem gonefishn - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
thx! very usefull! but don't go too heavy with the sound effects... that was a bit annoying.
Thank you for watching, and for the feedback! Yes I have had a couple of comments about the sound effects - I was just trying to switch things up a bit but it appears I have overdone it 😬- definitely a learning for future videos - thank you 🙏😊
I didn't even notice the sound effects😂
@@dimagass7801 Yay! Somebody who didn't mind! 😁👍🤣
I agree. I stumbled upon this channel the other day and it's a little gem that seems massively under-subscribed in my opinion as your content is clean/smooth, easy to listen to but regards the sounds, one or two is OK but that's about it.
@@whothefcukrmutd2008 Oh wow thank you so much for your support! Yes I am hearing everyone loud and clear about the sound effects - well noted. Thank you for the kind way you expressed your feedback :-)
1. Don't store your batteries in the charging hub or the drone
2. You can use Mini 2 and Mini batteries in each drone, BUT the Mini 2 with a Mini battery will NOT be less than 249 grams because the battery is heavier
3.Use the hub to charge something like your phone to discharge the batteries to between 50-60% as recommended by DJI for storage until you charge for use
4. Mini batteries are a bit cheaper to purchase spares for either.
Thanks for the builds Gomez, agree with all of your points 👍
You deserve an award
this video is filled with 7 minutes of pure BS. thank you for the summary!
th-cam.com/video/zRY4S73BEkU/w-d-xo.html
@@nicsa1073 That's not fair. This is information that may be common knowledge to some but is still unknown to others. Even though he is a bit dramatic about how quickly things can go south, I believe he is spot on. I have used LiPo batteries with airplanes for 10 years, those did not have management boards but would puff if left at 100% for extended periods od time.
Be nice Bro.... or Sis 😀
I've just removed my 2 spare batteries from the hub thanks to this video. I can't get the battery out of the drone at the moment as it's stuck 100ft up a tree. But that's a whole other story and we're working on it!!!
Oh wow that sounds like quite a story!! By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
On the plus side I am sure it discharged some During flight before hitting the tree.
OMG thankyou! just bought the Mini 2 and didn't know about the inability to discharge when left in the charger or drone!
You're very welcome - best to know right?
used to this already due to flying fpv quads with non smart lipo batteries. Was actually suprised the DJI batteries discharge themselves to storage levels which is pretty convenient. Nice to know they need to be out of the charger to do this I did not know that.
Hey no problem AndrewF - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Instead of turning around the batteries in the hub, I bought a small Lipo battery storage bag. Allows auto discharge and small enough to fit inside Mini 2 bag. Bag is fireproof so useful for airline holiday flights when we eventually get back to normal holidays!
Oh wow that sounds perfect! Are you able to post a link so I (and others) could check it out? Thanks for the tip!
@@GetBusyLiving you can get them really cheap on ebay. If you go on holiday you are supposed to use them to transport the batteries in the airplane.
@@nick1635 Cheers!
First of all congratulations for the video... what I understand is... that once they are 100% loaded in the HUB... you can use the HUB to load them, but once loaded, remove them from the HUB compartment and store them for example in a BACKPACK or BAG that can store the batteries? I can't wait and thank you in advance
Hey no problem WebTV Host Itatiba Web - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
FYI, DJI has added a firmware update that corrects the issue of the batteries not discharging while in the drone or charging hub.
Yes, this problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Glad I stumbled across this 3 days after getting my DJI Mini SE with Fly more kit! Today's the first day I'm not using it. Thanks! You'd think they'd be able to put this in the manual.
Hey no problem michael dique - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
I have seen this tip before and tested my three batteries by charging and then leaving in the hub. Results is each battery discharges 2% per 24 hours so I am confident my batteries will stay in good shape still leaving in the hub. Some may be having firmware issues..
Good work mate - yes based on lots of comments I am seeing it does appear to be an issue for some but not for others.
Still better don't charge them full if not needed. Extra charging cycles are also adding to battery degradation
@@vasylsky9486 Yes good point. Good news is that there is a fix out now - check out my video here 👍 th-cam.com/video/u2px0BHOH2s/w-d-xo.html
I bought my Mini 2 a few weeks ago and the battery firmware update was done immediately.
Yes they have released an update 👍
Thanks a lot for this! This is something that should be mentioned in the store for first time DJI drone buyers (and previous owners who never read the manual).
Hey no problem Patrick Jerome Obaldo - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
lol The remove batteries was the best advice I've heard and literally just got up to remove them. Thank You.
Hey no problem @Zero6BravoZ6B - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
It’s important to know Lipos also hate being stored at low voltage. So you don’t want to leave your batteries discharged after you’re done flying especially if it will be a while until you fly again. They like to be mid charge in that 40-60% range you mentioned. You also want to store them in moderate temperature environments. Lipos are awesome but they’re also pretty dangerous if people don’t know the basics.
Yes very important points - thanks for the reminders! 👍
Thank you!
It’s incredible how little people understand these. It’s possibly the power source most Americans handle most often and they’re clueless
Wish if i came across this video few months back, could have saved one of my batteries from DJI MINI 2 Fly more combo pack. Left Fully charged all 3 batteries in hub, now 1 battery doesn't charge at all. However, after going through this video feeling luck, other 2 survived. Thanks for video.
Hey no problem Chanchal Koshyari - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Extremely useful information, Thank You
Don't Panic! My understanding of LiPo batteries is that, yes you need to store them somewhere in the 50-60% range when they will be not used for extended periods of time, like several months. I fly 3 or 4 times a week but never know when that opportunity might arise. Keeping the batteries stored at 100% for days or even a couple of weeks at a time should not hurt them or make them puffy. If I know for sure that I will not fly for a couple of weeks or longer, I will drop the charge to 50%. I have followed this rule and have had my batteries for almost 2 years with little or no loss of flight time or performance.
Plus the cost of a new battery is minimal, I would risk damage to have batteries ready to go and not miss a chance. I was lucky enough to catch a coyote killing a goose because I had fully charged batteries ready to go.
Namaste Bitches!
This problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Good advice in the video. Over the last few years I use a Yx charging hub for my DJI SE and DLI Mini 4k and my batteries (5) have not exhibited this problem.
I bought it yesterday... I had charged it Fully and packed it to be ready for flight. Right now I watched your video before sleeping then jumped off and took them off and scattered them inside bag.😂😂😂 I hope they must be surprised.😂
Ha ha good work! I have seen some message from people saying that their batteries are discharging in their drone and charger. However DJI have recognised it is a problem so I would say better to be safe than sorry. Enjoy the Mini 2! It is an amazing little drone!!!
@@GetBusyLiving right . but can we still put discharged battery inside hub? I have another issue like not getting satellites signal for gps. May be I was flying indoors.
@@LittleSteps000 Yes you can put a discharged battery in the hub. The issue was/is with a fully charged battery in the hub and not discharging properly and therefore risking the chance of it not discharging, and then swelling and/or damaging itself. As for your satellites yes, it probably was because you were flying indoors, the drone needs clear line of sight to the sky.
@@GetBusyLiving thanks for the reply....but the putting battery in the hub without latching it fully was an awesome idea 👍
No worries ! 👍
I love how you made me stop my semi truck to pause right away and pull my batteries from the charging hub and drone! I felt inside of me that it was probably not a good idea, thank you!!!!! Hahahahaha awesome
Ha ha ha that's classic - I love that! Hey by the way, this problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Simply Brilliant. Concise and entertaining ;)
Thanks Bunjee82, I really appreciate that!
Great video. These batteries aren't cheap but unfortunately I already learned this the hard way. You would think paying $700-$3000 that the company would have said something in the booklet or even the sales people but no. I'm not knocking there products. i love my Mavic but after seeing this video I wanted to thank you. This will save a lot of headaches and frustration for many people
They fixed it this is not a problem anymore
Hey no problem George Edward - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
I tossed in foam inserts so I can use them as a storage case and not worry about the battery issues like swelling or whatever. I can pop them out anytime and use it as a charger again. I ended up spending $40 bucks where I can charge all 3 or 4 at once. I so far haven’t needed to use it after I went through all 3 batteries and still need to get back in the air. Loving my Mini 2. I hope by Black Friday I can maybe buy the Air 2s and getting it on a sweet deal. “Crossing Fingers”
Oh a great solution - thanks for sharing! DJI are working on a firmware fix so hopefully that will be out pretty soon. 👍
@@GetBusyLiving I believe we all hope so. Thank you for replying.
@@BlueDroneBlues You're welcome! Thank you for taking the time to share your tip! 👍
Really appreciate the info..
QUESTION : if the batteries deplete automatically to a safe storage percentage, whats the arm in charging them to 100%?
I'm no technical expert mate, but apparently it's not good for the overall life of the battery. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Another tip: buy a quick charge power bank. I use mine to discharge batteries into when I want to bring the charge down, and then to top them back up on the go. Means you don't have to wait at home while they charge.
OH THAT IS A SUPER TIP! Thanks for sharing that one, I will do that and I hope others see this tip as well! 👍👍👍
@@GetBusyLiving brilliant! If you get one with a double output (I have one with USB C power delivery and standard USB with quick charge 3.0) you can actually charge two batteries simultaneously on the way to your location. One in the hub and one in the drone. If you choose your case carefully you can have it all plugged in charging while you are walking. It's one reason why I'm hesitant to upgrade from the Mini 2 as I don't think I could do without this option now!
@@chrisbaishdrones Oh MAN the tips keep coming! This is gold!
Where do you get the quick charge power bank? Are you speaking about the one that comes with the fly more combo?
You are so so right Sir , I learned that the hard way and I don't ever do that again , I just spent 5 or 6 hundred dollars to get just three batteries because I was doing that same thing , charging batteries and leaving them till when ever I go out to fly and that could be sometimes a week or so later , not good at all . Big mistake . I had to Subscribe to you cause You had me Cracking up when You waited for the Viewers to go and take their Batteries out the charger hahahahaaaa, love it , that is what you call an honest and caring Reviewer , thanks and take care .
Thank you for your comments mate, I appreciate that ! By the way, not sure if you know, they have sent an updated firmware fix - check out my update here th-cam.com/video/u2px0BHOH2s/w-d-xo.html
@@GetBusyLiving, You are most welcome , just got home from work , will take a look now , take care .
Turning batteries round puts to much stress on the hub sides I think, I pop a penny under each battery in the charging hub when not getting used for a while,works for me👍
Yes after trying that myself I tend to agree. I've ended up just putting them in normally but not pushing all the way in. I do need some sort of buffer/pad though, that's a good idea.
I like that idea better myself. Going to have to do that. Flipping them around it’s definitely under stress
@@AquaTech225 Good news! You don't even have to do that ay more - a firmware fix has been released - check out my quick update video here 👍 th-cam.com/video/u2px0BHOH2s/w-d-xo.html
I really stood up and checked if I left the battery inside my mini 2.. 😄.. good post! Subscribed!
Ha ha good to hear you're a man of action Jed Santos - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
very well explained video, and not dull either. Great job!
Thank you so much! I really appreciate that! 🙏🙏
Haven't used mine in 3 months and they discharged and went into hibernation. They were stored in the hub. But after learning about this I'll start leaving them like that to be safe. Thanks for this video. Keep on top of firmware updates for older batteries.
Sounds like your ones were ok, which is great. Thanks for watching - I appreciate the comment 🙏
@@GetBusyLiving Just charged them fully and ran them app is saying 22min at 100%
Ok - that’s interesting 🧐
I am not going to obsess over this. I don’t want to leave the batteries partially discharged, as that stops going out flying on impulse - but what I will do is turn the batteries around in charging hub once charged, so they can slightly discharge if left. In actual fact I usually fly my Mini 2 at least 3-4 times a week, so it is usually only a couple days before I will be using again anyway
yeah great idea - I think that's a really good solution 👍
I wish I saw this video several months back. Down 2 batteries left in hub for almost a year. Lesson learned. Take notes people he knows what he's talking about.
Hey no problem Gamer_Guts - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Waiting 5 days to discharge my batteries really annoys me. I hadn't thought about using the usb to slowly discharge the hub with my cell phone. Great idea. Also, seating them backwards is another great idea. I love my mini 2 and even bought 4 extra batteries for the future. I also have the Mavic Air 1. I learned the hard way as I flew it so much that I wore out all three batteries over one year of constant flying. So this time I'm paying attention to the maintenance of all my drone batteries. It is very difficult to find Mavic Air 1 batteries because it's already considered outdated by DJI and I don't think they make them anymore. This leads me to one other good idea. Buy extra batteries. There is no point in buying an expensive drone if you ware out your batteries and can't get new ones. DJI kicks out drones so fast that they often discontinue support once your drone is a couple years old. These are all intelligent flight batteries. Your drone will not fly with substitute batteries. So in order to stay in the air, keep some new batteries in storage or get used to buying new drones about once a year.
Hey thanks for the amazing response! That's a good point actually, might as well buy some more batteries to help future proof yourself - at the end of the day it's a relatively small investment. 👍👍 Thanks for tuning in and for sharing your thoughts! 🙏
Hi I just have a couple of questions I’m hoping you can answer them. if you’re not gonna use it for let’s say like five days do you still need to discharge them and if you’re not gonna use them for five days, can you leave them at 100%? 2nd to last question, can you charge the batteries overnight? Last question, can you charge the controller and the batteries at the same time? or when the batteries are done, does it automatically switch over to the controller? Does it use the battery power or the power from the wall? And can you leave the controller and batteries overnight to or just the batteries?
A couple!? Ha ha .
It's not the end of the world but just charge them prior to you thinking you will use them. Ie if you're not going to use for 5 days then charge the day before. Otherwise they will discharge a bit and you will have to charge them up again anyway. Yes you can charge overnight (but I wouldn't) - the battery's system will manage the flow and slow it to a trickle but better to to charge and pull off. Yes you can charge the batteries and controller at the same time (you'd need separate plugs/charges anyway wouldn't you?) Not sure I understand your second to last question?
You can store the batteries as normal in the hub, and not push them all the way in. That way they can discharge, and if you need to charge them just push them in all the way.
Oh that's a really nice tip - thanks for sharing!
Thanks, I just did that after reading your comment. I just pulled the batteries out a bit to make them not click in.
Thanks for the tip. I am waiting on my Mini 2 fly more kit now. This will really help me out. Thanks for making this video; so glad I ran across it.
Ok this is great and thank heaps for the updates, much appreciated. Very informative.
You’re welcome - I have posted another video about the firmware update that DJI have done to fix the issue 👍
I loved the sound effects! It was reacting just like the effects 😂 ❣️
Oh yay! Someone that saw them for what they are! Thanks so much I really appreciate that!
It’s also bad to store the batteries at 0%. They should be stored at ~70% when not in use. Hence the auto discharge to 70%.
Yes that's 100% correct.
but how should that work, if charging hub, is going to charge the batteries from the most charged to the least charged? You must therefore need to remove each battery and load your phone, than change again...is quite annoying
Wow a great way to get a bowel movement this morning, I just purchased a Mini 2 and yes went ok lets charge everything , standard habit as We have Mav Pro's at work and the standard procedure once back to base charge everything, Bonus tip was using the charger as a battery bank - way cool
Ha ha that made me laugh mate. The good news is they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
An excellent tip for the Mini 2.
Thanks! I'm glad you found it helpful! 👍
Hi mate thanks a lot, I just this drone today it’s my very first one. I got too excited and forgot to buy the combo package so my charger with 2 more batteries and memory card are on the way. I’m still having a lot of without them, it’s such an easy thing to fly, loving it!
Hey no problem 36minutesAgo - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Thanks for waiting....all batteries on the charger... :)
Ha ha good work! No worries at all! I have seen some message from people saying that their batteries are discharging in their drone and charger. However DJI have recognised it is a problem so I would say better to be safe than sorry. 😁
really good tips I will stop charging after each flight from now on Thanks
Hey no problem sinout044 - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Very cool info. I’ve heard this on a couple other channels but it wasn’t explained in this way. Nicely done. New sub here. Lol. God bless and stay safe. Kevin
Thank you Kevin that means so much to me - I really appreciate that mate! Thanks - you stay safe too! Abs thank you so much for the sub 🙏☺️
Very helpful for a new mini 2 owner. Thanks.
Hey no problem dylan haney - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
It's better to just charge your batteries up to 60% after use, rather than fully. You don't even need to think about auto discharging then. Also, you are wasting charge because that extra 40% you don't need is a wasted part-charge cycle, and lipos have a finite number. On the flip side, if you do fully charge the batteries but end up cancelling your flight, just use the hub to manually discharge them back down. However, I don't agree with your advice to leave them discharged until just before you fly. It's bad for them too. Top them up to 60% for storage.
Hi there - yes I agree, you raised some good points. Sorry if I wasn't clear in the video, I wasn't meaning leaving them FULLY discharged until needing them, only down at around the 50-60% level.
Great video. Is this also true for the console battery.
Thanks for that Peter Stolee! No the controller battery is a different type of battery so no issues there. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
I legit panic opened my battery out of my drone and put it into the hub when he said he'll wait lmaoo
Ha ha that's classic! 🤣
Thanks for your video. I bought my mini 2 last year and almost always leave the batteries in the charging hub. I noticed that the batteries were not fully charged when I use them in the drone. At max around 95% but sometimes even less. I now understand that it's the discharging function. But it also happens when I leave them in the charging hub. It's maybe an update from DJI...
Hi mate - yes this problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Things i didnt know before, greetings from Germany
Thank you so much - I appreciate that! 😊 I love Germany - I would go every year with my job until the pandemic hit, hopefully I can do that again soon!
Good evening I know this is off topic but I value your opinion greatly. I’m going to buy a mini 2 you think I’m better off buy new or used? It’s about 100 dollar difference. Would be buying from eBay.
If it is refurbished by a genuine retailer then should be ok, otherwise you run the risk if there is damage to the drone that the seller is either not aware of or not disclosing. Honestly for $100 I would just buy new.
I contacted dji about this. They said if your batteries are discharged to around 70 percent then they may be stored in the hub. After all they do ship the batteries in the hub. And who knows how long they sit at a retail store. It's not as if people are dropping hundreds of dollars everyday on drones or equipment.
Yes that is true. It only seems to be a problem if they are FULLY charged. Lipo batteries do not like to be stored fully charged.
Great video. I had no idea that i have to treat my batteries this way
Hey no problem Tango Down - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
@@GetBusyLiving awesome thank you!
I'm a bit worried as I operate my dji mavic mini with batteries in the hub since half a year now. I just don't know if this problem also applies to it.
If you're talking about the Mini vs the Mini 2 then you are ok - the Mini batteries are a different type (Lithium Ion) 👍
Thanks for your info. 1 question I can’t get an answer for is can I use my magic mini hub for my mini SE batteries too?
Yes I believe you can. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Great advice - concise, fast, to the point, easy to understand, helpful and no padding - thanks! If only all TH-camrs were like this!
Thanks Toob41, I appreciate that! 😊 By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Can I charge my battery even if its not totally drained or used ? like its still 30% then Ill charge. is that fine ?
💥💥 Lots of great info, thanks. Can someone please tell me exactly what type of charging cable goes from the USB port to the charging hub.? 🤟🏼
Thanks! It's just a USB - A to USB-C. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Having two charging hubs with six batteries, they are the ultimate phone chargers when out and about, best part of three full charges per hub. Perfect for camping.
Great tip - thanks for sharing!
Bro really wasted 30 seconds to draw the video out to 8 minutes
Nobody forced you to watch for 8 minutes!
@@SpeccyManBut we have to watch the midroll ads that he can manually put in if the video is 8 minutes lang
I think this is the first time I’ve ever actually stopped a video and did as instructed.. 😂
Ha ha that's classic Bayawan Bob - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Hey thanks for all the tips keep em coming 🤘🏻Legend
Hey Esko Dipic you're very welcome! Thanks for watching, and for taking the time to comment! 🙏👍
Thank you for the video. Just got my NEO today and was wondering how to store the batteries. Ie. Charged or discarded. Thank you for the answer and Happy Flying 😊
Excellent content and delivery by you! I like the way you support your statements with external references to other sources of information. Thanks for the great information and keep up the good work!
Oh wow - that is super kind of you to say! Thank you so much! 🙏 I really appreciate your support 🙏
Yeah I leave mine in the hub and they seem to be auto discharging on their own. The firmware update resolved the problem your speaking of.
Yes it's all good now 👍
This is the most useful movie about the DJI drones. Thanks a lot! :)
However I'm wondering is the newest firmware update for Mini 2 is working well. And how it exactly works because the current user manual may be not be up to date.
Hey no problem domin45670 - I'm glad you found it helpful! 👍 Thanks for watching! 🙏
As far as I can see the update has worked fine. There are quite a few videos out now where people step through everything in detail so have a look around and you will find some useful ones 👍
Such a great channel
Thanks bluerocker27 I appreciate that! By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
RC planes and heli's use LIPO batteries and it is recommended to store them at 3.8 volts per cell, roughly 30% charge. Most chargers sold for LIPO's have a built in feature that will either charge or discharge to this level automatically. I have been doing this for years now and will store my Mini 2 batteries at 30%.
Yes that's true mate, and good on you - you obviously know your stuff. By the way, in case you didn't hear that DJI have released a firmware fix - I have made an update video here th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers!
What? 30% is way too low. 60% is optimal, not over 80%.
Hey bro ski 3.8 per cell should be closer to 50%
DJI mini 2 manual states store at 30%
Thanks for the information boss very helpful 🤟 didn't know that about the batteries I instantly went and took them out of my charger hub just slid them out and put a hairband around them
Hey no problem michael tucker - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Yes, the mini batteries weigh more, but the mini 2 weighs less, so you should be under 250g. By my scales, the mini 2 with mini 2 battery weighs 232g. I know it's advertised 249, but it isn't really.
Which also gives them even more wiggle room to add some sensors in the mini 3 👍🙏
@@GetBusyLiving Not really, I think the reason is Japan has a 200g limit, so putting in a half sized battery they stay under 200g. Something like that.
I just got one but have been flying fpv for years and racing rc cars for longer... yes.. 3.8 volts per cell for storage is KEY...
Hey no problem Thargor - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
your videos helped me get off the ground in minutes, not crash, and really enjoy the product. Thanks!
That's awesome mate, I'm glad I could help! By the way, regarding this video, DJI have released a firmware fix, you can check out the details in my follow up video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
I've got the dji mini and the batteries discharge themselves automatically
Yeah it was an intermittent problem that affected some people but not everyone. You're all sweet then 👍👍
Thank you for the great informative video on batteries, I was wondering if I was doing the correct things , I wasn’t
Hey no problem T T - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
It bugs me this is no popular opinion. I've been studying lipo, and liion for a few years now and while its not optimal to store your cells at 100 soc, it's not nearly as bad as storing them at 0 soc. When stored at either extreme end of the spectrum, the cells begin to develop what are called dendrites. Which is small metal spikes that build off the cathode and anode. When these spikes pierce the dielectric separating the two a soft short circuit can occur, greatly reducing all usable parameters of the cell except weight. I'd be very curious to see two identical cells stored side by side in exact same process except soc.
Yes you are right it is bad storing them at no charge as well. Finicky little buggers aren't they!? 🤣
Many thanks for your detailed explanations - very interesting! 👍
@@GetBusyLiving john goodenough. Google him. Crazy cool old man
@@mike-ph3fk Just did! Wow, what an over achiever 🤣
Amazingly smart and clever man. Where would we be without people like this in the world right!?
Good stuff! Thank you I was doing everything prior to this video. OCD is a crutch at times
Hey no problem BKNativeNYC - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Amazing video, I didnt understand the storing part. Even if my hub is not pluged and I have the batteries inside there, would it be harmfull?
Thanks! I appreciate that! 🙏
Yes, the principle here is that the batteries are designed to auto discharge when they are full, as they do not 'like' being stored fully charged, however some users are finding that when they are fully charged and stored in the hub (even though the hub is not plugged in), the batteries are not auto discharging. Over time this can cause some damage to the batteries. Best not to store fully charged (or fully discharged (they don't like that either) at all. Hope that clarifies for you 👍
Hoping to hope a drone soon 😕, but I'm getting to know the do's and don't of the drone. This is a super good channel, I'm subscribing, like all the videos I'll be watching and put all I learn to use once I got a drone. Thanks
Hey thanks mate I appreciate that! By the way, they have issued a fix for this issue - here's an update - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Most valuable video yet for my New mini 2. I appreciate it.
Hey no problem Perry Pelican - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
This is one of the first things you learn when using lipos in RC cars, planes and helicopters. I use my batteries and then storage charge them to 3.8V per cell. The chargers I use are far more complicated that dji's chargers so that you can properly maintain them.
Very sensible advice mate! Hey by the way, this problem was fixed by DJI some time ago via a firmware update for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
"Use the official DJI charger"... Yeah right. That doesn't even sell in Sweden and comes with the wrong plug if I wanted to order from abroad. Stuck having no clue which charger to use. Lol. Great video btw. Super useful! (not sarcasm) haha
Just got my DJI mini SE today and have been charging the batteries in the dock.
Just had a sudden thought which made me find your video. When one battery is fully charged and the dock has started charging the next, should I take the fully charged battery out of the dock?
No you can leave it in now. It's all fixed. Hey no problem Skye Tati - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Great video helped me out loads 👍 what's the deal with the controller battery is that the same type of battery 🔋
You're welcome - glad it has helped! 👍 No the controller is a different type of battery so no need for concern with that one 👍
Thanks man, great tips..does this apply to the dji rc pro controller?
Hey no problem @Twistedstar0320 - No the controller is different. By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Thanks for this very helpful information. With your tips, I can make my dji drone battery last longer by taking notes of some of the advise.
Hey no problem ROD ONE JOURNEY - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Thanks for the video; very informative as always. I am unable to turn the batteries around on my Mini2 changer (does not fit backward), so I use a large rubber band instead around the 3 batteries. This keeps them from dropping into the charger's connectors.
Hey no problem Martin Dudemaine - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Great tips, 🙏🏼 . Had my Mini 2 for two weeks now. I’m off upstairs to remove the batteries I fully charged last night after flying 😱
Now subscribed 👍🏼😁
Edit: Phew 😥 Just seen the video about the firmware update 😁
Ha ha NickB_UK, good on you! Oh, glad you've seen the other video, I was going to suggest that one. Hey thanks for the sub I appreciate that!
Thanks mate this was very useful and I liked your format a lot. Keep up great work
Hey no problem blissmogu - by the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Good video 👍👍👍
Oh wow - that is super kind of you to say! Thank you so much! 🙏
Interesting, my original mavic lets you set how many days until it goes into storage mode. Seems like newer models don't have this. Maybe the mavic itself controls that whereas now the batteries do it. Certainly storage mode worked fine with the battery in the mavic. Good to know that I can't expect the same on minis
yeah the others are all good now
Thanks for the great video,,,, 👍 down here in Manawatu just got my first drone and am loving it,,,
Great info! Just bought an Air S2 with 3 batteries and am glad I stumbled upon this video.
Hey Old Man Van Running you're very welcome! Thanks for watching, and for taking the time to comment! 🙏👍
After a flight, I always recharge my batteries because I never know how soon I'll fly again, but I never leave a battery in the Drone always in my DJI charging bay, but moving forward I'll just leave all three batteries out with no type of connection to them. Great tip and warning video. 👍🏽💯
That's a really good practice to have - nice work! Thanks very much - I really appreciate that ! 🙏
Liked the video, gave great info on the batteries.
I did not like the random sound effects, found them distracting. Just my two cents.
Noted! 🤣 By the way not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
Great video. Sound effects are cool. Thanks for the information
Hey Alexander M you're very welcome! Thanks for watching, and for taking the time to comment! 🙏👍
You're the first person that liked the sound effects - most didn't ha ha 🤣 I was just trying to mix things up a little bit and have some fun 😊
There’s a lot of talk about the intelligent batteries and the charging hub. Two questions: if I simply store them out of the hub or drone, will the auto discharge feature be adequate or do they need to be discharged manually? Secondly, do I need to worry about the battery in the remote controller…Is it ok to store the controller for a period of time with a full charge?
Yes they will auto discharge, and no, you don't need to worry about the remote controller, it's a different type of battery. Also, not sure if you knew, but they have released a firmware fix for this now - check out my update video here - th-cam.com/video/u2px0BHOH2s/w-d-xo.html
Cheers! 👍
I believe the last update fixed the issue and the batteries now discarche even if inside the hub or drone. It's worth an update on the video.
Yes it has - I've updated the description of this video, plus you can see my update video here th-cam.com/video/u2px0BHOH2s/w-d-xo.html 👍