Cool love this and and that music is ...... Tickety-Boo ! Going to have to get my Edelkrone Kit out and use it more wonder what the price of these is compared to my Edelkrone kit ?
Great video Sam! We acquired a GVM slider a while back and I love not having to worry about whether or not my movements will be consistent and steady. It really is a "Set it and forget it" tool perfect for talking head interviews especially
Nice one Sam. Got the same slider and head setup. Been using it for a few months on client work but yet to explore it for my TH-cam videos. I do feel my camera is a little heavy for it to be dead smooth (1DX mkii) and I wish there wasn't the pauses between keyframes. Hoping Zeapon start to update the app more with no pauses and what I would love is the ability to change speed or even add long timed pauses on the keyframes.
always wanted one of those sliders, i've had a few "ultra budget" ones and tbh i just need to invest in one of these...more than anything for fun because it does not fit any of my business needs. Good video as always my friend!
Great video Sam! Also your setup looks amazing, key light and the two tube lights in the back, very clean and beautiful 👍 You deserve so many more views and subscribers! In the end it'll pay off. I'm sure :) Have a great day!
Hello Sam , I love it , I thin g I going to buy one , the quality of the video with the slider look amazing , great job , well done for sharing like 25 , have nice week
To get the movie froth at home without steaming the milk: heat up cream (not milk) in a microwave until luke warm, stir it up to add lots of air and repeat until the froth is desired texture- add cream to coffee cup holding cup at an angle so that the coffee touches the edge of cup, and the cream just slides over with no mixing, teaspoon can be used to help only scrape over top layer of froth. To add symbol, heat the creamer a little hotter and stir more to get a more dry texture so that the powder lies on top instead of mixing- also fill the cup up as close to edges as possible, alternatively cut the stencil to a smaller diameter than the cup so it rests on the froth, tweezers to add/remove. Coincidentally, this also works to make a killer latte or cappuchino for the production without spending $5 at a hipster hangout + winning ‘awesome co-worker’ points. Careful it’s hot.
@@SamHolland someone just earned a new subscriber with those notifications turned on. Keep up the great work and thanks again for the tip, good lookin’ out for my wallet there champ.
I still cant figure out how to use this app. What I want to do is simple A to B to C move and its 50/50 works and not! App is laggy I can see it in your video as well. Hope dev will fix it.
To make a question mark on the coffee you can try making the coffee as thick as possible so it make sure the question mark not dissolved and there's no need to be a coffee you can use any liquid for the coffee just make it look like a coffee color at the end
Hi Sam. I’m not actually sure about the BMPCC compatibility. Maybe there’s a section on the website that says. It’s powered from these batteries here… sorry I forgot to put that part in the video… geni.us/Ra8ur thanks for watching 🤩🎥🙏🏻
all depends on the rig and how heavy. I have a GVM motorized slider that I put a BMPCC6k pro on. it works but the start/stop points is a bit wobbly because of the weight. My iPhone on it works great. in fact, I mounted the iPhone to a small gimble for phones, and I control the pan/tilt wirelessly as the slider moves. it gives amazing results. I dont go up and down with it though, only sideways because im worried about the weight and dont want the camera to come crashing down if the motor slips.
That ? Was a poor attempt… 😂 I love sliders but only for certain shots when I have the time to set up and nail it. But they are great pieces of kit and make editing much simpler
best use I got out of my slider is time lapse footage. really unique use but it looks amazing. I have a GVM motorized slider but probably wouldve saved money and just gone with a manual hand push slider for the rails alone. Any vertical movements always seemed to struggle with my rig weight. guess if youre only putting a small micro4/3 or something it'll be ok.
Hey Sam, I saw that a lot of people are complaining how the app is super buggy? Is it true, is it really pain to get it setup or it only happens something but mostly using the slider ain't so bad?
Can you do me a huge favor? I wanna make soccer training videos so i like the idea of face tracking and having the camera/gimble follow me left and right as I move. Any suggestions? Thanks Sam! 😇
Hi everyone, I'm 2 years late to the party... Since most of the links in the description don't work, could someone please tell me how much this setup costs today?
You're very good at shooting, but you're just as bad at coffee ahahah . You made me laugh so much my friend ahahah. By the way thanks for the great video as always
Let me tell you that I learned this ridiculous slider shit a long time ago. For all you 2% of people that shoot product…yes! Great idea! For a the rest of the 98%….makes zero sense…DONT waste your money
If you need a flat head, a Philips won’t do. Every tool has its place as you can see in this video. I love handheld and gimbal and sliders. Slider is probably my least used out of the 3 BUT when I need it, it’s there. If you don’t need a slider, then it’s a waste of money, if you do, it’s an investment.
I know what you mean. I like products that have a proper controller… however, you can do a lot of cool stuff with the app and building a separate controller would cost more so I guess it’s worth it for some 🙏🏻 thanks for watching some of the video at least 😛🎥🙏🏻
I'm obsessed with this film at the moment! Can you tell?? :D
Ummmmm yes and I haven't even seen it yet !
So am I hahaha
💪🏻🦇🦇🦇🦇
Oh mate. Get it watched 😂
Cool love this and and that music is ...... Tickety-Boo ! Going to have to get my Edelkrone Kit out and use it more wonder what the price of these is compared to my Edelkrone kit ?
Thanks man! 🙏🏻🎥 yeh it’s pretty well priced 🤩 thanks for watching brother
I was so confident that question mark was going to work out 😂
Haha 😂 so was I, Nick! “How hard could it be?!” 😂☕️
Now I need a slider 🔥
They’re so good! 🤩🎥🙏🏻
Great video Sam! We acquired a GVM slider a while back and I love not having to worry about whether or not my movements will be consistent and steady. It really is a "Set it and forget it" tool perfect for talking head interviews especially
Yes!!! Perfect consistent motion every time. Thank you! 🎥🤩🙏🏻
@GarrettWare I wanted to get one of those. Are you still loving it?
I am indeed! It doesn't get brought out for every shoot, but when i need a different perspective and fluid movement, its perfect.@@CliffFennell
@@GarrettWareI’ve got one from Neewer but the movement is not smooth.
Hi Sam, thanks for this, looks attractive to me and has good payload carrying.
Hi Bob! Yeah such a great filmmaking tool. Thanks for watching and commenting 🤩🙏🏻🎥
Loved this video Sam! Glad there’s some more affordable pan and tilt sliders on the market now
Thanks Caleb 🙏🏻🎥🤩
Nice one Sam. Got the same slider and head setup. Been using it for a few months on client work but yet to explore it for my TH-cam videos. I do feel my camera is a little heavy for it to be dead smooth (1DX mkii) and I wish there wasn't the pauses between keyframes. Hoping Zeapon start to update the app more with no pauses and what I would love is the ability to change speed or even add long timed pauses on the keyframes.
Apparently they’re working on the pauses between keyframes in later firmware 🤩🤞🏻 it’s so good though eh. Thanks for watching
@@SamHolland totally! Although I feel I need a stronger tripod and head for it.
@@SamHolland Hey I'm on the verge of buying this, does they update the firmware with pauses between the keyframes?
always wanted one of those sliders, i've had a few "ultra budget" ones and tbh i just need to invest in one of these...more than anything for fun because it does not fit any of my business needs. Good video as always my friend!
Thanks brother! Yeah they are great at what they do. When you need one, you need one 😂🎥
Invaluable, Sam. Thanks so much, mate.
🇺🇸💛🇬🇧
My pleasure Glen! Thank YOU 🙏🏻🤩🎥
Bloody good video, Sam! Hope you're well, mate. 🙂
Thanks Peter. Hope you’re well too 🤩🎥🙏🏻
Great video Sam! Also your setup looks amazing, key light and the two tube lights in the back, very clean and beautiful 👍
You deserve so many more views and subscribers! In the end it'll pay off. I'm sure :)
Have a great day!
Hey thanks Lara! 🤩🙏🏻 glad you like it. Hope you’re all well 🙏🏻🎥
Ha i have my cube right here on my desk as well!
Subscribed, for the informative and clean review. straight to the point.
You’re a legend! 🙏🏻 thanks for watching. Hope this video helped. Welcome to the crew 🤩🎥💪🏻
This makes a good hack. Thanks for sharing man
Thank YOU for watching 🤩🙏🏻🎥 great piece of gear for these shots
excited to see that r5c review incoming!
Oooo it’s coming! Went out testing it today. 🙏🏻🤩🎥 thank uou
Hello Sam , I love it , I thin g I going to buy one , the quality of the video with the slider look amazing , great job , well done for sharing like 25 , have nice week
Thank you! 🤩🙏🏻🎥 have a good week
To get the movie froth at home without steaming the milk: heat up cream (not milk) in a microwave until luke warm, stir it up to add lots of air and repeat until the froth is desired texture- add cream to coffee cup holding cup at an angle so that the coffee touches the edge of cup, and the cream just slides over with no mixing, teaspoon can be used to help only scrape over top layer of froth.
To add symbol, heat the creamer a little hotter and stir more to get a more dry texture so that the powder lies on top instead of mixing- also fill the cup up as close to edges as possible, alternatively cut the stencil to a smaller diameter than the cup so it rests on the froth, tweezers to add/remove.
Coincidentally, this also works to make a killer latte or cappuchino for the production without spending $5 at a hipster hangout + winning ‘awesome co-worker’ points. Careful it’s hot.
😂 thank you! 🙏🏻☕️
@@SamHolland btw, do you still recommend the Zeapon slider & heads, or are there any competitors i should take an extra look at? 😁
YES! … HOWEVER… there’s a new one coming out very soon that I’ll be reviewing 😜 I didn’t tell you that 🤫
@@SamHolland someone just earned a new subscriber with those notifications turned on. Keep up the great work and thanks again for the tip, good lookin’ out for my wallet there champ.
🤩 thank you so much! Great to have you here as a valued subscriber and now part of the channel! 🎥🙏🏻
thank you Sam.
You tell the truth and above all it's easy to make sliders yourself, you don't even need to buy them
I still cant figure out how to use this app. What I want to do is simple A to B to C move and its 50/50 works and not! App is laggy I can see it in your video as well. Hope dev will fix it.
Yeh it has been a little buggy but they’re working on it. My advice is, update the firmware if it seems glitchy. I did mine and it works fine now 🤩🙏🏻🎥
Great video, just what I was looking for.
Great video Sam!!! It looks like the slider's results are more stable than using the gimbal!!
Thanks Tommy! 🤩🙏🏻 yeah! When you need precision shots, there’s no beating a slider 🎥
Very helpful. I really enjoyed this. Thanks
Thank you 🤩 I’m pleased this helped you 🙏🏻🎥
To make a question mark on the coffee you can try making the coffee as thick as possible so it make sure the question mark not dissolved and there's no need to be a coffee you can use any liquid for the coffee just make it look like a coffee color at the end
Do you think the pan and tilt head could fit a BMPCC? Also is all of this ran off batteries or is there a permanent power supply option?
Hi Sam. I’m not actually sure about the BMPCC compatibility. Maybe there’s a section on the website that says. It’s powered from these batteries here… sorry I forgot to put that part in the video… geni.us/Ra8ur
thanks for watching 🤩🎥🙏🏻
all depends on the rig and how heavy. I have a GVM motorized slider that I put a BMPCC6k pro on. it works but the start/stop points is a bit wobbly because of the weight. My iPhone on it works great. in fact, I mounted the iPhone to a small gimble for phones, and I control the pan/tilt wirelessly as the slider moves. it gives amazing results. I dont go up and down with it though, only sideways because im worried about the weight and dont want the camera to come crashing down if the motor slips.
That ? Was a poor attempt… 😂 I love sliders but only for certain shots when I have the time to set up and nail it. But they are great pieces of kit and make editing much simpler
Yeh. A lot of setup but worth it for the shot 🤩💪🏻🎥
Nespresso frother and a salt shaker for the Cinnamon
☕️☕️☕️🤩
actually you need to use that gimbal in undersling mode
Why not put the gimbal on the tripod, then use the DJI app to set start and finish points?
I thought about this but I still want the dolly action
Great vid!
Thank you! 🤩🙏🏻🎥
best use I got out of my slider is time lapse footage. really unique use but it looks amazing. I have a GVM motorized slider but probably wouldve saved money and just gone with a manual hand push slider for the rails alone. Any vertical movements always seemed to struggle with my rig weight. guess if youre only putting a small micro4/3 or something it'll be ok.
Wait to see what I’ve got coming in the next few weeks 😉🎥
@@SamHolland hell yeah my brother! ill be waiting! have an awesome weekend and keep having fun!
Thank you. You too 🤩🙏🏻🎥
How many cups you drink before you got it right?
😂 … I still didn’t get it right!
looks cool, but seems like a $1400 solution.
PS = Dont become a Barista anytime soon I'll show you how to make a decent coffee 😁😁
Haha I don’t think I could if I tried! 😂☕️
@@SamHolland Yes you could ..............
You didn't even show us the full coffee cup clip? Seriously?
You sold me 😁👍
Thanks for watching 🤩🙏🏻🎥 pretty cool thing eh
Hey Sam, I saw that a lot of people are complaining how the app is super buggy? Is it true, is it really pain to get it setup or it only happens something but mostly using the slider ain't so bad?
Hi Rich. I did have some problems with the app and firmware but they are constantly updating it so a quick firmware update always sorts the issue. 👌🏻🎥
I love my slider. Dont use it enough....
They are so good for certain shots! 🤩🙏🏻🎥
Wouldn't the brand be pronounced zeppon? like weapon?
which size would be best for interviews
Can you do me a huge favor? I wanna make soccer training videos so i like the idea of face tracking and having the camera/gimble follow me left and right as I move. Any suggestions? Thanks Sam! 😇
Best thing to do is use the DJI gimbal with the Raven eye 👌🏻🎥🤩
How i can buy this in Bangladesh?
*horizontal mode 👍🏾😊
Slider not available any other suggestions ?
Been digging your videos! New sub, let me know if you are ever in LA or San Diego would love to collab sometime!
Thanks Matthew! 🤩🙏🏻 oh mate. I love LA. Will do 🎥💪🏻 thanks for watching commenting and subbing. Welcome to the crew
Couldn’t you just attach your gimbal to a cheaper slider? You can get the power bases for the DJI gimbals to make it shorter.
hi! how fast this slider and head can move?
Oh sam, what have you done to my wallet! I just got the ifootage nano shark slider and now feel like I need the tilt feature
😂 I’m so sorry… but also not sorry! Cos it is awesome! 😂🙏🏻🎥 thanks for watching and commenting!
Why is this better than edelkrone?
Haha that and held shot in the beginning was far grittier and better for me. That smooth movement in the original makes it boring.
Buy a cheap slider and put a gimbal I had on there. That’s it saving my last kidney 🤣
Will the pan tilt fit a bmpcc4k?
Gimble pro will hate all this bulky stuffs. 🤗🤗🤗🤗
No rating for this from India why?
one day you are gonna need a camera robot ... because of that speed issue. you will need to save up some money dude :)
Haha 😂 I’ll get saving now!! 💰💰💰
Hi everyone, I'm 2 years late to the party... Since most of the links in the description don't work, could someone please tell me how much this setup costs today?
우리에겐 스로우모션이 있습니다!!
You're very good at shooting, but you're just as bad at coffee ahahah . You made me laugh so much my friend ahahah. By the way thanks for the great video as always
😂😂 I was looking forward to enjoying a coffee after filming but I never want to see coffee again after this! ☕️😂 thank YOU! 🙏🏻🎥
succes you bought. nerd all ready build one decades ago
I just use my camera tower
Me? is he talking to me?
very heavy slider.and I don't like their app
Yeah, it looks painful to use.
Let me tell you that I learned this ridiculous slider shit a long time ago.
For all you 2% of people that shoot product…yes! Great idea!
For a the rest of the 98%….makes zero sense…DONT waste your money
If you need a flat head, a Philips won’t do. Every tool has its place as you can see in this video. I love handheld and gimbal and sliders. Slider is probably my least used out of the 3 BUT when I need it, it’s there. If you don’t need a slider, then it’s a waste of money, if you do, it’s an investment.
I lost interest once he mentioned app.
I am not buying a new cell phone just to be able to download an app.
I want a product that is self contained.
I know what you mean. I like products that have a proper controller… however, you can do a lot of cool stuff with the app and building a separate controller would cost more so I guess it’s worth it for some 🙏🏻 thanks for watching some of the video at least 😛🎥🙏🏻
I could not watch more than 2 minutes with all the zoom jump cuts, annoying as hell, wished people making videos just stopped using them.
The fact that you didn’t show and mention how loud it is, is a dead giveaway that you are a shill. Unsubscribed. This thing is noisy.
Криворукий оператор