The process of making a mirror ball. The last remaining mirror ball manufacturing factory in Japan.
ฝัง
- เผยแพร่เมื่อ 22 เม.ย. 2024
- The process of making a mirror ball. The last remaining mirror ball manufacturing factory in Japan.
👁Nissho Co., Ltd. 株式会社 日照
☎️ TEL：072-634-1231
🏠maps.app.goo.gl/oZbpdDqC1VHod...
🚩goo.gl/maps/y8QbAHApZxSSzfAR9
💌 Contact : processx2@gmail.com
📸 Copyright(C) 2022. Processx. all rights reserved.
想像の何十倍も手作業で驚きました！
実際に使われている所見てみたい、綺麗なんだろうな🪩
Not only they cut each mirror into plenty of circle, but the size gradually change as it reach the top of the ball. Insane job...
I can honestly say I never even wondered how disco balls are made, yet I was totally mesmerised watching this. Very nice!
へら絞りの技にはいつも見惚れてしまう。日本の職人さんの技術力の凄さよ
I'm always impressed how the Japanese people worked with pride and quality. It's simply amazing.
Dude... Shout out to handmade artisan disco balls. We love you, Japan!
LEDでは出せない良さが有りますね。
贅沢な照明器具です。欲しい！
I'll never look at them the same again. A lot of work goes into making them. Great video!
You have never seen a disco ball in your life and now you never will.
思った以上に手作業が多くてびっくりしました😮
プレスで作った半球を合わせるだけだと思っていましたが、手作業なんですね。平面の円盤が半球になっていく行く様はまるでマジック！すごいなぁ。
この作業量だとかなり高価なんだろうなぁ、樹脂ミラーじゃなくてガラス製だし
バブルの頃は相当売れたはず
ホールに光るミラーボールはほんとキラキラして最高なんだよな🪩✨🍸
わかります〜
I was surprised at how much is done by hand true artistians/craftsmanship 👏👏 ❤❤
今の令和時代にミラーボールの需要ってどこにあるんだろうか・・・・。守りたいこの工場。
Zeppとか行くと見かけるけどあれって交換とかしてるんかな…
クラブ（DJクラブ）とかにぶら下がってるけど、中国製だと思う。
値段を見てみたけど、直径50cmで日照製30万円、中国製1万円だって・・・
@@jyon4649中のモーターが壊れたら回らなくなるから その時は交換だね
ミラーボール専業って訳じゃなく、舞台照明等を扱ってる会社。
difficult to watch someone wearing gloves so close to metal that could snag it on such a massive lathe!
And bending over it to turn it on
Странно, что никто не вспомнил Пакистан. Нельзя?
丸の形の鏡は、四角のタイプより高級感があっていいですね！
ミラーボール生産では世界シェア90%以上なんですってね
すごいわね。
今の主力製品はライブや舞台などにある青緑赤のライトなんですわよ。
FRIDAY NIGHT essential 🕺🏻
やはり、出来の良し悪しが有るのだろうか？
何もかもが職人技の結晶ですね
鏡を貼り付ける時に
少しでも傾いてしまえば光は綺麗に反射しないし
ヘラ絞りも、少しでも歪めば球体にはならない
日本の素晴らしい技術ですね
Heck yeah! Keep the party rockin'! Thank you for making magic!
ミラーボール大好きです🪩こんなに手間がかかってたんですね、勉強になりました👍
職人さんこれからも美しいミラーボール作り続けてください✨
Increíble trabajo y esfuerzo, para un producto que bien conservado puede perdurar por generaciones como un auténtico tesoro por la artesanía fina aportada para su creación.
Mi más sincera enhorabuena 👏 👏 👏
The amount of handcraft for making these mirrored balls is impressive! Beautiful work and the process was surprising. My favorite video of yours!
Nhà máy sản xuất cầu gương của Nhật Bản, Tuyệt vời. Người Nhật làm ăn như ý 🇯🇵👋.
その昔、小田原ドラゴン作の「おやすみなさい」と言うマンガでは主人公のてつろうがミラーボール工場で働いており、彫刻刀でミラーボールを削り出して作っていたのだけれど、現実は違った笑
赤道から極に向かってミラ―のサイズを変えているとは想像もしていませんでした
これからも素晴らしい仕事で日本のみならず、世界を照らしていってください
Máy móc thiết bị làm ra sản phẩm tuyệt vời. Khi hoàn thành món đồ rất đẹp mắt 🇯🇵👍.
Que trabalho incrível,pura perfeição!
ミラーボールの工場もプロセスも、ミラーボールが使われるような所とは雰囲気が全く違うのが何か面白い。
Un grand merci pour la vidéo!
Wow, that there's so much craftsmanship in those!
良いもの見せてもらった
まさしく職人技ですね
que hermoso , saludos desde Argentina
Missed the interesting part with the internal motor.
Beautiful!💜
素晴らしい。
look how small his metal spinning lathe is!!! amazing! @#$
Lindo trabalho ! Abraço de Brasil 🇧🇷
Parabéns!!!
Belíssimo trabalho ❤
Fine craftsmanship! I had no idea these were handmade.
Настоящие мастера своего дела! 👍
Japan is always No 1 .
They should have disco playing all the time in that shop.
Belíssimo trabalho parabéns pessoal 👏👏👏👏👏👏👏
Wow, they use metal spinning to make the two halves. I would have thought that using something like hydroforming was much more efficient both in terms of time and cost.
30 years too late . . .
A lathe is much cheaper than a high pressure setup. You'd need also a die for each diameter, parts like that are ridiculously expensive.
@@timtim8468 Makes sense, thanks.
Low volume production. Not worth the $100,000 plus for each die to be made for them to be pressed out. If you wanted cheap plastic vaccuum-formed bases then China or Thailand are where you'd be shopping.
It's the circles cutting that could be so much more cost effective if done by a CNC (or a similar process).
Japanese workers be thinking: "These Americans will buy ANYTHING!"
Beautiful work !!! 😳👍
La precisión y el trabajo que ponen en cada parte del proceso es increíble.
Estoy seguro que las primeras bolas de espejos que hicieron en esta fábrica siguen funcionando, la calidad y fortaleza de los materiales salta a la vista.
Saludos desde Argentina.
That muzak…
Now I need one for my home. Or maybe three.
😂👍
Interesting that the drive motor is contained WITHIN the sphere itself. I would think that would pose a bit of an overheating issue. The Harry Potter-esque music makes it magical! Thanks for sharing!
Шар моего детства.❤❤❤😊
Japan : the last remaining country on earth where things are done properly and well ! 🫶🏻
manufacturing automation has left the chat
５５年位前に近所のスナックでミラーボールを真空飛び膝蹴りで割った記憶があります。
被害金額として１０万円払いました、請求書には日照製の記載がありました。
lo mejor que yo e visto en mi vida son uno maestro esto chino lo felicito es un bella de arte lo elicito son uno maestro los chino
Cool ! I have a fever now. ..🕺
interesting process. placing the mirror circles on the metal ball and then applying
the cement ,reminded me of doing a Mosaic art piece, with small ceramic tile squares.
did not realize that the Motor is inside of the ball. always thought it was up in an attic,
and the down-rod on the ball was attached to it, through a hole in the ceiling.
I have learned something here. thank you for an interesting video my friends in Japan 😀
Ya, I have a very cheap version, the globe is most likely just cardboard, and the mirrors are square and very crudely placed. The motors on mine are on the outside though, bilt into the hook mechanism. I actually had to replace one of the motors, thankfully its no big deal.
These mirror balls though are obviously top notch, and a work of art compared to mine. Although I've been using mine for over 30 years now, I didn't appreciate the labor involved in the cheap ones I owned, and how much more labor is involved in these works of art.
Excellent.
これ手作業で作ってるのが驚きです
Such precision manufacturing and fit. Probably better engineered than Sputnik back in the day.
Very nice ball. love the metal internals and circular mirror. Cheap balls use polystyrene and square mirror, the shape of the reflected light's just aren't the same. 👍👍
Very cool thanks for sharing.
I loved this, it brings very nice memories from my teen age years in the late 80's. ❤
めちゃくちゃかわいい！
部屋に欲しい
so beautiful
Сколько стоит такое произведение?
これだけ大きいのはコンサートなどで使用するのでしょう。
手作業で作るのは大変ですね。
I love mirror balls. I like the idea of a circular mirror. Perhaps a surface first mirror would look sharper?
Дискотека💃👯🕺
とてもクールですね！
動画に音楽を入れないでいただくことは可能でしょうか。🙏🏼
ありがとうございます
بيه جهد كثير
Using heat and water to heat shock the glass to get the circles easier vs after scribing the circles doing it by pliers
I wish I was a mirror ball, so when the world shines a light on me I shine in return
I am probably in the minority, but I think the square mirrors is preferable to the round ones...
Same
ほぼ手作りなんだ😮
鏡から丸鏡切り出すのが、ガラス扱ってるとは思えないほど凄い。
It's amazing how many of these cottage industries there are in Japan. Now that disco is over, I suppose there'd only be room for one manufacturer . . .
My guess is that karaoke bars probably buy most of what they produce.
well done , thats a quality product ,,, when the mirrors started to fall off my last 1m mirror ball as the glue dried out , it revealed a polystyrene globe of the world ,,, I wasnt impressed at all.
That is absolutely beautiful best Disco Ball 🪩 I’ve ever seen! Wow 💯 😮
❤❤❤
I am surprised that there are still companies that make these.
very cool!
What in the magical world of Harry Potter is this music 😂
👍
Probably 20 companies in China making them faster and at 1/3 the price.
Vaccuum-formed plastic spheres, with low grade plastic reflectors and cheap & poorly made electric motors inside - sure. They would be turning them out in the dozens, if not hundreds, for the same price. And they would be utter shite.
May they never go out of business
Definitely ordering several
欲しくなるね こんなにいい仕事してる製品は本当に欲しい
I need one for my room now. I must have one 💃
they didn't show the motor that rotate the globe from the inside.
OMG. How can I buy one! The graduated circles! I have never seen one so beautiful!
Totally cool. I'm usually annoyed by these how it's built kind of videos that don't have narration, but you could figure out what was going on without the narration.
These are expensive disco balls. I see other cheaper disco balls still for sale so there are other manufacturer(s) still, probably in Mexico for instance!
Dancing close in a fairly dark smoke filled room with Frank Nagai crooning Tokyo naito kubaru with Matsuo Kazuko. Would absolutely need one of these to complete the atmosphere!
Anyway, mirror balls, being outstanding quality like these ones, or even cheap ones are highly underappreciated! Such a simple thing from a technical view, so played out in the 70's discos. But I bet slow dancing to Vera Lynn in a dance hall with one of these felt pretty amazing. But the beginning goes all the way back to 1917!
Watt iss loos?
These are quality mirror balls.
It’s a manufacturing factory!
知らなかった
ここまであらゆる技術の集合体でできていたものだったのか。。
In the US we use square pieces to literally fill in the whole thing
Very cool but I'm surprised they're not padded better in packaging.
I used to wonder why bugs attracted to lights, though recent finding might suggest it wasn't even attraction that caused it. Then us human, supposedly the smartest amongst living things are mesmerized with pika-pika things like this, lava lamp, diamond.. fascinating
意外に家内工房な製作過程😮