***ATTENTION: The bearings used for this project are BETTER than the bearings shown in the scam videos. My wheel and upper magnets move SMOOTHER than the scam videos on YT. It doesn't matter how smooth, because the wheel will never continue to spin all on it's own. Please click the link below to see my Video Playlists. Thanks! bit.ly/2kEDBXD **For GREAT deals(Usually cheaper than EBAY) on neodymium magnets, Fidget Spinners, electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!) All Items: bit.ly/2cgYr14 Flash Deals: bit.ly/2cb6CZB **Try these money saving coupon codes: BGAFF7 or affiliate6 or elec or measure or HDWARE2 or WELDTOOL** or ask if other codes are available! Thanks For Watching!
It can't works, since this model is clearly a scam. We can see that no effort have been put on the "stabilisation problem" of a full-magnetic dynamo. As soon as your system magnetif fields can find a stable spot to sit in, it will stop working. What I'm trying to figure out is a model that would induce a cycle in the system, where that stable state will be broke so the rotor is pushed to continue on spinning, and where that "break" requires far less energy to create than what the dynamo will produce... I wondoer if you encoundered a design that would be close to achieve this...
and still comment this ,how much time and energy you puttin in here. its so obviously... so sir ... just one question ? is free energy possible ? is it suppressed by oil and energy companys ?
@Deborah Anne DeMarco Very simple reason. I used ceramic magnets because that is exactly what the scam artist used, and that is exactly what I had access to. You would buy 13 neodymium rings magnets for $75.00 each for a scam? Thanks For watching
Thanks Bill! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/0rpaOqGY18M/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html th-cam.com/video/ErpS7C4gUVA/w-d-xo.html
Finally, a person with the brains and courage to call out fake claims on the internet. Thank you - you have loads of potential subject matter to debunk.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You Other great videos: th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/0rpaOqGY18M/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
sure! you guys are geniuses. But I have done these experiments and you can get it to work....but the key is in taking care to get just the right size and distances correct. And that result pruduces very little torque, but it is enough to get it going in the same way that magnets can light a bulb with, again, just the right set up, sizes and distances......also a lifter can be made using high voltage and very careful adjustments to distance and sizes. The only thing you have proven is how much work you went thru to try and disprove something that someone else actually figured out how to make work
Thanks for the heads up, Bruce. So I guess this guy is yet another TH-cam media mogul billionaire racking up revenues by producing evil content geared to do nothing but make himself money. I've unsubscribed and will avoid - not interested in making these people even richer. Besides, his content now features ads for Trump and the GOP - so shame on his scam.
@@mrbrucewayne631 Video. Or it didn't happen. Prove it. Engineers tend to be science minded and will change our minds with proof. Show your *entire* setup. Show the build process. If you can make it work and give proofs, you'll be richer than anyone by licencing the tech... If you can't prove it, with full build shown, then it didn't work. It really is that simple
Thank you for taking the time to expose those pranksters. Such types are too numerous in TH-cam. Any presentation that looks too good to be true or has the word 'secret' in its title should always be taken with a pinch of salt.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/WmYVFpsWfBc/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
And earned some 4 million views as well. All of these plus the 4 million views of the scam videos are wasted minutes. So, 4 + 4 = 8 million views x 10 minutes = 80 million minutes, or, above 1 million hours wasted. This resembles some 600 man years of time gone down the drain due to the scammer and due to the good person here, trying to teach people a lesson. Well. In 600 man years, if these 1 million hours were spent well, and supplies were available, one can - comfortably - plant some 60 million trees (1 seedling per minute = 60 seedlings per hour)..
@@davidsvarrer8942 sir, you are incorrect, this vid is not a waste unless you missed the "exposed" in the title. did exactly what it said and informed otherwise ignorant people. so save yourself the time... why did you even come here if you already knew the info.
I also enjoyed you correcting the fact that people are out there hoping people to the point of making them look like fools it is comforting to know that there’s someone like you out there to help out the rest of us
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
@@electronicsNmore brother you work can be corrected by arranging all the wheel magnets in a same pole manner and the pair of rotating magnets should be in one South and one North pole manner and this will work definitely
I've watched the video you referenced for your build, when I commented about the metal shroud hiding something the "inventor" got real pissed at me, made my day in fact. Funny thing, when you look up "inventor" in the Dictionary it never mentions "Scammers"
Wow, am impressed you took the time to analyze the other video and experiment various possible combinations. That is a scientific approach. Love the video
If all. The magnets on the wheel are facing up on the same polarity . But the other one set to repel it , it is then set to constantly repel the wheel , or am I missing something
Nothing is free, The parts generally cost money and "Time is Money" but it is really awesome that people try to find useful ways to re-purpose previously used stuff instead of letting it kill the land :) Great Job, keep it up :)
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/0rpaOqGY18M/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
these debunkers work for the government What if these devices actually work and the government is proving them wrong to save the oil industry from collapsing?
Your explanation of this scam is very concise and well organized. Thank you for going to all the time and trouble to expertly explain how the scam was perpetuated.
Glad you enjoyed the video! Be sure to check out my other videos, especially the 2 below, rate thumbs and share. Thanks th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html
I clicked on this vid from your channel, thinking that you might be into the Free Energy thing, and I'm so glad that you're debunking this Troll-Science-level nonsense.
Another great YT scam exposed: th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html Also be sure to check out my bike generator video below and share. Thanks! th-cam.com/video/8rj-emSUf7I/w-d-xo.html
I've been wondering for a while would a semi perpetual motion machine work not one for energy but just something that would be able to conserve a large amount of motion
It needs be said that the fake videos is all about the views, it a way to make a buck and most people know free energy is impossible right now, mabe in the future someone somewhere will find zero point but thats 50 or 100 years from now
Thank you for sharing this video. You did a great job explaining the project. Thank you for exposing the scammers. Do not see no need for people to do a evil deed as scamming people.
thesecret2 Sure it will spin endlessly, and you have a video that you made proving this on your channel? I thought so. More talk from people with zero proof of their claims.
Glad you enjoyed the video! Be sure to look over my extensive video playlists below for many other videos of interest to you, and share my channel with many others. Thank you th-cam.com/users/electronicsnmoreplaylists
I tried a wheel like the Mendlev motor with 1/2" diametert magnets and it does the same thing. It freezes over the to opposite magnets and the wheel stops. I'm thinking I need 3 wheels like the Mendelev motor with the patterns staggered to keep up the rotations. Have you tried that at all?
Nice work. You can prove that magnetism is actually a form of "energy" and it is in fact perpetual, but with a mechanical device energy is always dissipated, and entropy will always beat you up. There are proven devices such as Tom Bearden's MEG , which produce electrical energy without relative motion.
I hear all this talk about it won’t create enough energy to be efficient.... lol we don’t care about efficiency we can about function, when you can function you can improve on efficiency 😂 if it charges your 12 battery system and doesn’t use another power source with minimal moving parts then you have something worthy of charging your phone, led strips even if it only spins 24 hours and I have to give it a push it’s still free what did it cost me to spin it by hand to get it to run another 24 hr cycle except my own physical energy 🤷♂️
Seems like it could have a number of potential applications, it could help improve energy production in turbines, or you could use superconductors and low Temps to create zero friction. 8 had this idea using just 3 magnets back in 2005, using 2 positives and one negative, that's why I looked this up
Proof of concept is there, materials used are inefficient, airgap is extensive and drag on driver is visibly extensive but awesome job trying to replicate loved watching the video!
Glad you enjoyed it. Be sure to look over my "Free Energy" scam exposing video playlist below and share. Thanks! th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
Great job! I got reeled in on a few scams myself but slowly figured out that what I was doing wasn’t making any sense. What’s the joy for a person to fill the world with such lies!??? Keep up the great work Thank you. Santa Barbara, Ca.
THANK. YOU. I have tried to explain to people numerous times online that these things will not work - the claimed behavior violates the most basic principles of physics. All I get for my trouble is attacked - at the very least of being closed minded, at worst of being in the pocket of the energy utilities. It's definitely nice to see that there is someone else out there that "gets it." Great job!
You're welcome! I have better "Free Energy" scam exposing videos than this one, so be sure to check out the link below and share. Thanks th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
People have been taught physics in a box. Think outside the box. I can’t speak for this video, but Amazon sells small magnetic motors as educational experiments. Magnets installed at a specific angle will give you the maximum amount of push/pull effect to increase horse power. The power cartel in the US will not allow any company to commercialize these motors. Think about it, if adding power to a coil in a motor creates a magnetic field and turns a motor armature, then replacing that coil with a magnet will also turn that Armature.
@@markhill485 The problem, Mark, is that while there do exist configurations of magnets ideally situated to give you an "energy production stroke," that stroke eventually comes to and end - there is a stable potential energy minimum and the apparatus will eventually reach equilibrium there. And once that happens you have to *use* energy to move the apparatus back to the position in which it's ready to give you another energy stroke. This is a no win situation - even completely neglecting losses, it requires just as much energy to restore that energy-laden configuration as you get out of by allowing the system to move out of it. You get energy while "the rock rolls downhill" - then you must supply the same amount of energy back to get it back uphill again. And honoring losses, you don't just come out even - you lose. No one expects that rock to roll back uphill somehow, or for the water that falls through a dam to somehow find its way back behind the dam again (at least not without being evaporated by the sun first). But talk about magnets instead, and people lose their common sense. It's an entirely similar situation - there *is no free energy* and there's simply no way around that. I'm sorry. I really am - I'd love to have such technology too. The bottom line, universally applicable rule in all situations of this type is "there is no shortcut uphill." You can't get up the hill without investing the energy. The type of physics involved makes no difference. In the specific case you mention in your reply, the difference between using a coil and using a magnet is that you can alter the amount of current in the coil, and therefore modulate the amount of force. You can turn the current on when it's time for the thing to make a power stroke, and then turn it off when it's time for you to return the system to its original position. THAT lets you do the position restore without investing that energy. However, changing the current in the coil requires electrical work. What you've done is replaced the need for applying mechanical energy with the need for applying electrical energy. You're CONVERTING energy between electrical and mechanical forms - you're not extracting energy from nothing. That's what "just thinking about it" should lead someone to conclude. By all means - buy the gadget on Amazon and play with it. It's a free country - nothing is stopping you. But you're not going to find success in this endeavor. You may learn a great many things, though, and that is always a good thing.
An excellent video exposing a scam. Your expose is greatly appreciated. You make it easy to understand the way the magnets interact for someone who has a hard time telling the difference between up and down..
Glad you enjoyed the video Charley! Be sure to watch my other great "Free Energy" scam exposing videos below, rate thumbs up, subscribe, and share my channel with many others. Thank you! th-cam.com/video/8GkXl8mAvIQ/w-d-xo.html th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/5lvFSQ2_4tg/w-d-xo.html th-cam.com/video/BSdSDfOWbNs/w-d-xo.html
Sweet ! I am interested to know what kind of gear ratio you are getting with this system ? If you rotate the 1-single-magnet at about 60 rpm, how many rotations is the horizontal plate getting please ? Thank you.
Any person/company that sells plans, but doesn’t sell completed devices, is a scammer. If you discovered how to make free energy, wouldn’t you sell complete, patented devices?
I always laugh when people post stuff implying perpetual motion. Most people know it does not exist. Thank you for clarifying this basic fact of physics.
Thanks for watching Jeremy! Be sure to look over my "Free Energy" scam exposing video playlist below for many other entertaining "Free Energy" videos. th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
why couldny it be possible? A magnet us unlimited magnetic energy and if magnetic fields relate with electric fields then why would it be impossible to get unlimited electrical energy from it?
@@jeremytravis360 Your answer doesnt answer anything. Magnets produce a perpetual magnetic field without any energetic input. Magnetic fields induce electric fields and vice versa. Therefore it makes logical sense there exists a way to harness unlimited electrical energy from magnets because magnets provide unlimited magnetic fields. Can anyone explain to me why it is absolutely impossible for there to exist a way to get unlimited electricity from magnets somehow?
I have a home-made Tesla car with 7 of these on the roof! I only need to let my car go down the hill of my garage and the wind makes the thing start! Two people in my block are also having claims from the energy company for how low their bills are at the end of the month, and all thanks to this tutorial. Thank you electronicsNmore! You the man! Bring it on!
You're welcome! Please return the favor by sharing my channel with all your friends. Thank You Other great videos: th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/0rpaOqGY18M/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html th-cam.com/video/ErpS7C4gUVA/w-d-xo.html
Gravity and magnetism share so many properties. I can see why physicists are always looking for a formula that ties the two forces. Also the strong and weak nuclear forces.
When you put the longer rod onto the shaft and manually spun it faster, could you attach a step gear/transmission that could work in unison with the large wheel to perpetuate the motion of the "drive" magnets and achieve a different result? I'm kinda dumb, so please excuse me if I seem like an idiot.
Yes the laws of physics such as the basic law that perpetual motion is physically impossible and the scammers playing on the part of the human mind that really wants what is'nt possible to actually be possible . So energy is'nt either created nor destroyed just changed forms so it takes another form of energy(mechanical) to produce(convert) to electricity. The only "free" energy I'm aware of is absorbing electricity that surrounds high tension electrical lines and transformers but They will bust You for stealing that and the sun which at least presently nobody is charging any fees for . I suppose that will come about same time as when air starts costing money.
Glad you enjoyed the video! Be sure to check out my extensive video playlists for other great videos of interest to you, rate thumbs up, and share my channel. 3 more great videos: th-cam.com/video/zwdydXyC-k0/w-d-xo.html th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html Thanks for watching
+Shaw kar Not. Going. To. Happen. I don't care how much you fiddle with the magnets or their placement, no, it's never going to work. Learn some physics, please.
Love it when science with " Proof " busts TH-cam content provided science ! Thanks for creating content showing why someone's scam is a scam . We have tried many things these content creators have created which failed grossly , so Thank You !
It’s a shame people got to do shit like that on the shows because you know people are really trying to learn something and you’re always going to have an asshole out there it’s just a real shame that people do things like this thanks for exposing that it was greatly appreciated again great video love the way you explain things in detail where anybody could really understand this thank you
Did a fantastic job. I have found myself that their are definitely FRAUDS out their. Don't understand why people's want to deceive. INSTEAD of ENLIGHTENED HIS FELLOW MAN. YOU SURE DID!! THANKS FOR SHARING
Glad you enjoyed the video! Be sure to check out my other great videos below and share. Thanks th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/0rpaOqGY18M/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/WmYVFpsWfBc/w-d-xo.html
Honest man, thank you. Please keep it up, we need honest people in the tube, we have thousands of honest people showing how to, videos and I thank them but we always have a few that get a, I do not know what and BS the video, games for little brains. Thank you to all the people in u-tube that put good info on how to do or fix something in the car or home or special projects that someone may want to do. Thank you all, I know it has helped me many,many times, Lol. Many times😁😁😁😁
Loh K.S. If the world had more people like him, the world would be even dumber! The average IQ is 100, his is probably around that. If the average IQ was 150, then FailArmy would go out of business!
TheUltimateSlugger I forgot more than you will ever learn. By the way, my IQ is 132. I had it tested years ago by a psychologist. Learn to speak kindly to and about others, or keep your mouth shut. People like you are not welcome on this channel.
I am just starting to learn about this stuff so please dont mind my ignorance. I was wondering if less energy is needed to power the above magnets then what is needed to power the wheel? If so, could a "cog" effect be used to multiply electrical output?
You never gain, you ALWAYS lose energy. Thanks for watching! Be sure to check out my other videos below. Many are better than this video. Thank you th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
May be a silly question but why you have both north and south. I feel that is the reason its not working. dont you have just opposing to propel the wheel? I will try myself to find out but just curious :)
Hi Chris. Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
"We should've taught them about physics. All of them. Now it's too late: they all have the right to vote yet too many chose to vote for perpatuated stupidity."
You did a big no no. You are using an asymmetrical block of wood as your base. Never NEVER use asymmetrical wood (in particular grooved lengthwise) on any free energy device.... unless your intent is to render it useless. Thumbed up and subscribed. Thank you for exposing these frauds.
Would it be possible to have a rechargeable battery that powers a motor, to spin that axle and rig up the bottom wheel (12 magnets), to produce enough energy (EM field), to have overunity? If somehow you could make the top axle have less friction than the bottom wheels axle or vise versa, so one would produce more energy than is needed, or the other require less output than is being used? The reason I ask is because of the joule thief circuits you have made. Could they be incorporated into doing such?
Glad I ran across your video, now I can watch the rest of them. We lose power a lot in the winter so trying to come up with something I can use to keep us at least some power.... being broke sucks...LOL. Thank you for helping others to not waste their money.
A battery backup + inverter would be the cheapest and easiest way. You can use wall chargers to charge the batteries and connect the inverter to your heater, a fridge and some lights at minimum to stay comfy through the outage. Used car batteries are a cheap way to make a battery bank. Lithium iron phosphate batteries are a better, but more expensive alternative. Just make sure the chargers you charge the batteries with are designed for whatever chemistry you pick. You would need enough batteries for the average time your outages are too.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You Other great videos: th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/0rpaOqGY18M/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html th-cam.com/video/ErpS7C4gUVA/w-d-xo.html
Glad you enjoyed the video Steve! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/0rpaOqGY18M/w-d-xo.html th-cam.com/video/WmYVFpsWfBc/w-d-xo.html
You're welcome Rob! For a big laugh, be sure to watch my "Free Energy" video playlist below, and share my channel with many others. Thanks th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
Thanks for the informative video dude!!!!!!!!!!!!!!!!!!!! So.......I know you dont want to hear unqualified people commenting on issues they found with the setup. I'm not an expert and have no clue...but I will absolutely point out areas that I found kind of flawed and that I need explanation on. That is the whole point of TH-cam....video formatted information on some sort of material, and the social interactive discussion regarding said material. No hard feelings dude...just my observation.That being said....the magnet that spins in the wooden housing didn't seem to spin as freely as you stated. Your plate with the ball bearing is GREAT!!! But the "oiled" axle of the free spinning magnet has a very very sufficient amount of friction, creating enough drag for me to discredit this test. I DO NOT believe in free energy...but the control was compromised with this minor oversight. Put a bearing in the wooden housing to better control the experiment and re-run it.Just my novice opinion and comment. Cheers!! Kona
Glad you enjoyed the video Paul! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Question, if you have all the magnets on the plate oriented toward the same pole and at a 20 degree angle then the magnet on the stand stationary using the opposite pole at a counter 20 degree angle?
@@electronicsNmore I like the machine you built and you demonstrate the flaws quite well, but if I'm not mistaken many trains and roller coasters work with magnetic technology and I realize those are electromagnetic but the principal should be the same if applied properly to your machine with the magnets you have and no electricity. I realize this is your machine and your video and you laid the groundwork clearly for me to build my own using your template with my own tweaks to try my ideas and I appreciate your reply although it's not exactly understood by me, I think with those changes and someone starting the wheel it should continue to spin. Thanks for your time.
It would be a gearless drivetrain, no transmission needed. Have a magnet ring in place of the ring gear of the differential. Have another magnet ring coupled to the crankshaft with a linear bearing linkage connected to the accelerator. Instead of the accelerator pedal operating engine rpms, it would control magnet spacing. The engine could have a simple air flow governor like a lawn mower - set to always maintain optimum rpm. The engine could be designed to have a very narrow power band - producing unbelievable fuel efficiency. Of course, you would run the risk of mass destruction any time driving over a manhole cover or across railroad tracks, but there would never be stray nails on the road to puncture a tire. Gears are so old fashioned and quaint.
I've rolled this project in my mind when i first saw these videos, but couldn't picture how it could possibly work (without a motor spinning the magnets, that is.) Just curious, how about if all of the magnets on the wheel have N facing up and the overhead magnet faces S towards the wheel. That might be repulsive :-D
You're welcome! I have many great "Free Energy" scam exposing videos, so be sure to look over the playlist below. Thank you th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
This is a pathetic design and there are much more advanced examples from 1800 let alone modern examples! Look it up- this is a shill video to hide simple fact and logical thought.
Its the truth though. The lower magnet installation should be on generator motor, powering an electromagnet to preserve the polarity of the larger wheel, and the energy also should be powering a drive motor and electromagnet on the upper magnet. If you use "loose" magnets that are not electromagnets, the polarity will settle and freeze the installation, as the passing magnet changes the polarity if it not preserved by an electromagnet. Ultimately, there is 1 peak RPM that could drive this system to generate the highest amount of power, and more or less RPM would be inefficient. Essentially it is a "Digital Gearing System", with friction free cogs, and even if 100% energy was reused to power the motor and electromagnet this design is AT LEAST an electronic perpetual motion machine and at best, could power a lightbulb wirelessly. Please, try harder. Because without electromagnets you arent doing a debunking service. All free energy "Digital Gearing Systems" must be wired with electromagnets and hand cranked to optimal RPM to actually benefit the results of the quest for perpetual motion engines and electrical systems. If you do more tests on the device you made and tested the polarity of each magnet you will find the polarity to be continually reversed when the magnets are left stationary or when passing over other magnets beyond 1 full rotation. This changes the polarity - considering each lower magnet should be alternating polarity, futher tests will expose that you have failed to engage the driven gear, which is the upper magnet that would be powered by the lower gear system.
What if the magnets up high are stationary and at a 45 degree angle N down-ish. The magnets on the wheel are ALL N up (repelling) so in my mind, I see this creating a constant push. Would that work?
So, yes, the conservation of energy law is correct. This video is great for those who won't believe that until they actually see it for themselves. Your work and effort is definitely appreciated.
Glad you appreciated all the hard work that went into making this video! Please be sure to share my YT channel with others, and watch my other great "Free Energy" scam exposing videos below. Thank you th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/5lvFSQ2_4tg/w-d-xo.html th-cam.com/video/BSdSDfOWbNs/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
Question... what happens if you have a wind wheel attached to the 2 magnets... will that make the magnet wheel spin? Then with some sort of stator... generate power?
Is it possible to get more energy out than is put in? Like, when you spin the bar to rotate the tray, is there more of a potential return than what would be required from some other energy source to turn the bar?
No. Be sure to watch and share my "Free Energy" scam exposing video playlist below. I show videos much better than this one. Thanks for watching! th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
You're welcome Denis. Be sure to watch my other "Free Energy" scam related videos below, and most importantly share my channel with others. Thanks! th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
Aza X Well, his title IS followed by a question mark... and a tilde thrown in for good measure! Hence it poses a question, which the vid poster did a great job of debunking this scam.
Quantum Leap You can't win with some people. Don't even bother. The title and video thumbnail is perfect. This video is about a "purported" Free Energy device shown on TH-cam. The image in the thumbnail is exactly what is shown in the video. People need to learn what real clickbait is.
Would this be an efficient way to generate electricity if the shaft was attached to flowing water to spin the top magnet? I assume traditional generators are way more efficient, but would this be a feasible way to generate electricity?
Glad you enjoyed the video John! I have MANY videos that cover a wide range of subjects, so be sure to look over my video playlist below and most importantly share. Thank you
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/0rpaOqGY18M/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
+electronicsNmore Can you please provide a link to the video which caused you to go through all the trouble to replicate and test in this video you created here? :
+electronicsNmore How then can we see for ourselves what you are attempting to do, and if you are doing it correctly? You make many references to some video which you lambast, yet refuse to share with us a link to it?!! You are then no different than those whom you claim intentionally leave out crucial elements of its operation and construction. If you do not provide this vital piece to the puzzle, then you are no better a person than the scammer
Be sure to check out my other great videos below and share. thanks! th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html th-cam.com/video/WmYVFpsWfBc/w-d-xo.html th-cam.com/video/8rj-emSUf7I/w-d-xo.html th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
Im a mechanical engineer and LOVE the idea of a motor that runs just from the geometry of permanent magnets. Unfortunately I don't think it can be done because of the laws of magnetism and physics. I've tried, even using shielding that moves into place as one magnet gets close to the other to allow other magnets to propel the wheel.
***ATTENTION: The bearings used for this project are BETTER than the bearings shown in the scam videos. My wheel and upper magnets move SMOOTHER than the scam videos on YT. It doesn't matter how smooth, because the wheel will never continue to spin all on it's own. Please click the link below to see my Video Playlists. Thanks!
bit.ly/2kEDBXD
**For GREAT deals(Usually cheaper than EBAY) on neodymium magnets, Fidget Spinners, electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!)
All Items: bit.ly/2cgYr14
Flash Deals: bit.ly/2cb6CZB
**Try these money saving coupon codes: BGAFF7 or affiliate6 or elec or measure or HDWARE2 or WELDTOOL** or ask if other codes are available!
Thanks For Watching!
It can't works, since this model is clearly a scam. We can see that no effort have been put on the "stabilisation problem" of a full-magnetic dynamo. As soon as your system magnetif fields can find a stable spot to sit in, it will stop working. What I'm trying to figure out is a model that would induce a cycle in the system, where that stable state will be broke so the rotor is pushed to continue on spinning, and where that "break" requires far less energy to create than what the dynamo will produce... I wondoer if you encoundered a design that would be close to achieve this...
and still comment this ,how much time and energy you puttin in here. its so obviously... so sir ... just one question ? is free energy possible ? is it suppressed by oil and energy companys ?
electronicsNmore
electronicsNmore it seems that the magnet plate is slanted down in the other video. Possible that gravity will help it to spin?
the plate in the other video passes 3 or 4 magnets per rotation of the magnet up top. if you gunna "expose" something at least replicate it properly.
@Deborah Anne DeMarco
Very simple reason. I used ceramic magnets because that is exactly what the scam artist used, and that is exactly what I had access to. You would buy 13 neodymium rings magnets for $75.00 each for a scam?
Thanks For watching
Great video. As a former R&D Engineer, I appreciate the effort you put in making this.
Thanks Bill! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/0rpaOqGY18M/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
th-cam.com/video/ErpS7C4gUVA/w-d-xo.html
An We Al can do so much more !
Yeah, I agree.
Finally, a person with the brains and courage to call out fake claims on the internet. Thank you - you have loads of potential subject matter to debunk.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Other great videos:
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/0rpaOqGY18M/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
sure! you guys are geniuses. But I have done these experiments and you can get it to work....but the key is in taking care to get just the right size and distances correct. And that result pruduces very little torque, but it is enough to get it going in the same way that magnets can light a bulb with, again, just the right set up, sizes and distances......also a lifter can be made using high voltage and very careful adjustments to distance and sizes.
The only thing you have proven is how much work you went thru to try and disprove something that someone else actually figured out how to make work
Thanks for the heads up, Bruce. So I guess this guy is yet another TH-cam media mogul billionaire racking up revenues by producing evil content geared to do nothing but make himself money. I've unsubscribed and will avoid - not interested in making these people even richer. Besides, his content now features ads for Trump and the GOP - so shame on his scam.
@@mrbrucewayne631 Video. Or it didn't happen. Prove it. Engineers tend to be science minded and will change our minds with proof. Show your *entire* setup. Show the build process. If you can make it work and give proofs, you'll be richer than anyone by licencing the tech...
If you can't prove it, with full build shown, then it didn't work. It really is that simple
Sure, Bruce.
Thank you for taking the time to expose those pranksters. Such types are too numerous in TH-cam. Any presentation that looks too good to be true or has the word 'secret' in its title should always be taken with a pinch of salt.
Thanks for saving use time. Plus to realize how many low people get a kick out of wasting our time. I appreciate what you have done .
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/WmYVFpsWfBc/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
Thank you. Honest people are very rare these days. You did a valuable public service.
Be sure to share my channel with all your friends, and check out my latest video!
And earned some 4 million views as well. All of these plus the 4 million views of the scam videos are wasted minutes. So, 4 + 4 = 8 million views x 10 minutes = 80 million minutes, or, above 1 million hours wasted. This resembles some 600 man years of time gone down the drain due to the scammer and due to the good person here, trying to teach people a lesson. Well. In 600 man years, if these 1 million hours were spent well, and supplies were available, one can - comfortably - plant some 60 million trees (1 seedling per minute = 60 seedlings per hour)..
alexander macrae there's a lot of honest people just not very many that make these magnet motors
Jitesh
@@davidsvarrer8942 sir, you are incorrect, this vid is not a waste unless you missed the "exposed" in the title. did exactly what it said and informed otherwise ignorant people. so save yourself the time... why did you even come here if you already knew the info.
Of course it doesn't work. You forgot to include the hidden motor.
... and a battery to drive it!
+SayNOtoGreepns
+subductionzone 좋은 말 동생
I think it only works in the country of its origin. the gravity and earths field id different around the pyramids
@William Buffington Of course not.
It's great to see someone who will take the time to debunk crap like this! Thanks.
Glad you enjoyed and appreciated the video! Please share. Thanks
I also enjoyed you correcting the fact that people are out there hoping people to the point of making them look like fools it is comforting to know that there’s someone like you out there to help out the rest of us
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
@@electronicsNmore brother you work can be corrected by arranging all the wheel magnets in a same pole manner and the pair of rotating magnets should be in one South and one North pole manner and this will work definitely
I've watched the video you referenced for your build, when I commented about the metal shroud hiding something the "inventor" got real pissed at me, made my day in fact. Funny thing, when you look up "inventor" in the Dictionary it never mentions "Scammers"
Wow, am impressed you took the time to analyze the other video and experiment various possible combinations. That is a scientific approach. Love the video
Glad you enjoyed it! Please be sure to share the video link with others, and look over my extensive video playlists as well. Thank you
If all. The magnets on the wheel are facing up on the same polarity . But the other one set to repel it , it is then set to constantly repel the wheel , or am I missing something
You went wrong by putting every third one to attract , thus slow ING the wheel instead of constant repelation
Nothing is free, The parts generally cost money and "Time is Money" but it is really awesome that people try to find useful ways to re-purpose previously used stuff instead of letting it kill the land :) Great Job, keep it up :)
Please be sure to check out my extensive video playlists and most importantly share. Thanks!
Hey, maybe we are related.
Thank you for taking the time to expose these scammers well done. Robert
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/0rpaOqGY18M/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
these debunkers work for the government What if these devices actually work and the government is proving them wrong to save the oil industry from collapsing?
Your explanation of this scam is very concise and well organized. Thank you for going to all the time and trouble to expertly explain how the scam was perpetuated.
Glad you enjoyed the video! Be sure to check out my other videos, especially the 2 below, rate thumbs and share. Thanks
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
We Do Have things that Will an do work very well !
I clicked on this vid from your channel, thinking that you might be into the Free Energy thing, and I'm so glad that you're debunking this Troll-Science-level nonsense.
Another great YT scam exposed:
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
Also be sure to check out my bike generator video below and share. Thanks!
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
Except for Batman, he uses free energy and obviously Superman.
I've been wondering for a while would a semi perpetual motion machine work not one for energy but just something that would be able to conserve a large amount of motion
@Elementary Watson thank you
This is a honest, man, God bless.
or a government paid one to make sure that it doesn't work in order to put people off the track.
It needs be said that the fake videos is all about the views, it a way to make a buck and most people know free energy is impossible right now, mabe in the future someone somewhere will find zero point but thats 50 or 100 years from now
Thank you for sharing this video. You did a great job explaining the project. Thank you for exposing the scammers. Do not see no need for people to do a evil deed as scamming people.
mike80411 Glad you enjoyed my video! Be sure to share my channel with others, rate thumbs up, and check out my video playlists. Thanks
thesecret2 Sure it will spin endlessly, and you have a video that you made proving this on your channel? I thought so. More talk from people with zero proof of their claims.
electronicsNmore ...was he supposed to reply in the middle of your statement?
zee339 I checked his video list before posting my comment, so I was able to answer my own question. :-)
electronicsNmore indeed!
electronicsNmore but I have seen a magnet powered device that works on youtubeso it is possible to keep a device moving using nothing but magnets
Have you seen the device in person, and carefully inspect it? No. These supposed devices have no torque even if you could get them to spin.
Good, video, true scientists are skeptics, you have a scientific mind. Congratulations for your objectivity and inventiveness!
Glad you enjoyed the video! Be sure to look over my extensive video playlists below for many other videos of interest to you, and share my channel with many others. Thank you
th-cam.com/users/electronicsnmoreplaylists
i like the idea of a magnetically coupled gear set... just goes to show, you can learn and get new ideas even from scam videos!
Frank Graffagnino right !! agree
Frank Graffagnino I had the same thought :D Magnetic gears, No friction no heat ;)
AkaMrJay There would still be heat and there would still be stressed points where the magnets are mounted.
nothing touche !! Ideas can be crazy and may not yield expected result and may :)
DarkAvatar1313 Also there would be a current generated in the magnets due to magnetic flux which would also create more heat loss!
The shaft is extremely smooth. Lubed up real nice.
Inyourendo
I tried a wheel like the Mendlev motor with 1/2" diametert magnets and it does the same thing. It freezes over the to opposite magnets and the wheel stops. I'm thinking I need 3 wheels like the Mendelev motor with the patterns staggered to keep up the rotations. Have you tried that at all?
try it in the mid east it may work over there
Nice work. You can prove that magnetism is actually a form of "energy" and it is in fact perpetual, but with a mechanical device energy is always dissipated, and entropy will always beat you up. There are proven devices such as Tom Bearden's MEG , which produce electrical energy without relative motion.
I hear all this talk about it won’t create enough energy to be efficient.... lol we don’t care about efficiency we can about function, when you can function you can improve on efficiency 😂 if it charges your 12 battery system and doesn’t use another power source with minimal moving parts then you have something worthy of charging your phone, led strips even if it only spins 24 hours and I have to give it a push it’s still free what did it cost me to spin it by hand to get it to run another 24 hr cycle except my own physical energy 🤷♂️
Seems like it could have a number of potential applications, it could help improve energy production in turbines, or you could use superconductors and low Temps to create zero friction. 8 had this idea using just 3 magnets back in 2005, using 2 positives and one negative, that's why I looked this up
@@uncannyvalley2350 and how much power does it take to continuously cool something to superconducting temperature?
@@ananthropomorphictalkinggo6641 too much to make this kind of a set up worthwhile
@@the_undead exactly.
Proof of concept is there, materials used are inefficient, airgap is extensive and drag on driver is visibly extensive but awesome job trying to replicate loved watching the video!
Glad you enjoyed it. Be sure to look over my "Free Energy" scam exposing video playlist below and share. Thanks!
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
What you have made could be used as a gearbox with no metal to metal contact. No wear and tear or lubricant needed...
I love exposing the scams, keep up the great work!!!
Great to hear. You can support my work by sharing the video link on social networking sites. Thank you!
Great job! I got reeled in on a few scams myself but slowly figured out that what I was doing wasn’t making any sense. What’s the joy for a person to fill the world with such lies!??? Keep up the great work Thank you.
Santa Barbara, Ca.
I dint see how we can't make this work. Sadly it's really simple in my mind I just don't have the resources to make it work
You have done a great job for the fools like me who spend their precious time seeing these nonsense bogus free energy videos on utube nothing is free
THANK. YOU. I have tried to explain to people numerous times online that these things will not work - the claimed behavior violates the most basic principles of physics. All I get for my trouble is attacked - at the very least of being closed minded, at worst of being in the pocket of the energy utilities. It's definitely nice to see that there is someone else out there that "gets it." Great job!
You're welcome! I have better "Free Energy" scam exposing videos than this one, so be sure to check out the link below and share. Thanks
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
People have been taught physics in a box. Think outside the box. I can’t speak for this video, but Amazon sells small magnetic motors as educational experiments. Magnets installed at a specific angle will give you the maximum amount of push/pull effect to increase horse power. The power cartel in the US will not allow any company to commercialize these motors.
Think about it, if adding power to a coil in a motor creates a magnetic field and turns a motor armature, then replacing that coil with a magnet will also turn that Armature.
@@markhill485 The problem, Mark, is that while there do exist configurations of magnets ideally situated to give you an "energy production stroke," that stroke eventually comes to and end - there is a stable potential energy minimum and the apparatus will eventually reach equilibrium there. And once that happens you have to *use* energy to move the apparatus back to the position in which it's ready to give you another energy stroke.
This is a no win situation - even completely neglecting losses, it requires just as much energy to restore that energy-laden configuration as you get out of by allowing the system to move out of it. You get energy while "the rock rolls downhill" - then you must supply the same amount of energy back to get it back uphill again. And honoring losses, you don't just come out even - you lose.
No one expects that rock to roll back uphill somehow, or for the water that falls through a dam to somehow find its way back behind the dam again (at least not without being evaporated by the sun first). But talk about magnets instead, and people lose their common sense. It's an entirely similar situation - there *is no free energy* and there's simply no way around that. I'm sorry. I really am - I'd love to have such technology too.
The bottom line, universally applicable rule in all situations of this type is "there is no shortcut uphill." You can't get up the hill without investing the energy. The type of physics involved makes no difference.
In the specific case you mention in your reply, the difference between using a coil and using a magnet is that you can alter the amount of current in the coil, and therefore modulate the amount of force. You can turn the current on when it's time for the thing to make a power stroke, and then turn it off when it's time for you to return the system to its original position. THAT lets you do the position restore without investing that energy. However, changing the current in the coil requires electrical work. What you've done is replaced the need for applying mechanical energy with the need for applying electrical energy. You're CONVERTING energy between electrical and mechanical forms - you're not extracting energy from nothing. That's what "just thinking about it" should lead someone to conclude.
By all means - buy the gadget on Amazon and play with it. It's a free country - nothing is stopping you. But you're not going to find success in this endeavor. You may learn a great many things, though, and that is always a good thing.
Wouldn't using solar panels be more effective?
wouldn't coal be more effective?
Team Nova But that's still not clean energy
wouldn't burning dolphins be better ?
Levi Sadler Wouldn't solar corns be better?
***** Can we burn Clorox for energy?
An excellent video exposing a scam. Your expose is greatly appreciated. You make it easy to understand the way the magnets interact for someone who has a hard time telling the difference between up and down..
Have you made sure the power cable is connected securely.. ?
Have you tried fixing the upper magnets, and starting the wheel or table spinning to see what happens? Just interested in knowing what occurs.
Here I am watching this video in March, 2019. Timeless information. Very enjoyable. Thank you.
Glad you enjoyed the video Charley! Be sure to watch my other great "Free Energy" scam exposing videos below, rate thumbs up, subscribe, and share my channel with many others. Thank you!
th-cam.com/video/8GkXl8mAvIQ/w-d-xo.html
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/5lvFSQ2_4tg/w-d-xo.html
th-cam.com/video/BSdSDfOWbNs/w-d-xo.html
Sweet ! I am interested to know what kind of gear ratio you are getting with this system ? If you rotate the 1-single-magnet at about 60 rpm, how many rotations is the horizontal plate getting please ? Thank you.
Any person/company that sells plans, but doesn’t sell completed devices, is a scammer.
If you discovered how to make free energy, wouldn’t you sell complete, patented devices?
I always laugh when people post stuff implying perpetual motion.
Most people know it does not exist.
Thank you for clarifying this basic fact of physics.
Thanks for watching Jeremy! Be sure to look over my "Free Energy" scam exposing video playlist below for many other entertaining "Free Energy" videos.
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
why couldny it be possible? A magnet us unlimited magnetic energy and if magnetic fields relate with electric fields then why would it be impossible to get unlimited electrical energy from it?
@@mattwaters9008 Because there is no such thing as perpetual motion.
@@jeremytravis360 Your answer doesnt answer anything. Magnets produce a perpetual magnetic field without any energetic input. Magnetic fields induce electric fields and vice versa. Therefore it makes logical sense there exists a way to harness unlimited electrical energy from magnets because magnets provide unlimited magnetic fields. Can anyone explain to me why it is absolutely impossible for there to exist a way to get unlimited electricity from magnets somehow?
@@jeremytravis360 the solar system would like to speak to you
So True, there is just no such thing as FREE ENERGY. Thanks for sharing,
Please share. Thanks!
that's not what
Tesla implied
Solar is as close to free energy as we can get right now. And even then, the sun is nuclear powered
I have a home-made Tesla car with 7 of these on the roof! I only need to let my car go down the hill of my garage and the wind makes the thing start! Two people in my block are also having claims from the energy company for how low their bills are at the end of the month, and all thanks to this tutorial. Thank you electronicsNmore! You the man! Bring it on!
And here we can see the first law of thermodynamics in its natural habitat, aka the real world! ;)
The solar system would like a word with you.
Thanks for being honest.GOD BLESS YOU.many many many times over.
You're welcome! Please return the favor by sharing my channel with all your friends. Thank You
Other great videos:
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/0rpaOqGY18M/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
th-cam.com/video/ErpS7C4gUVA/w-d-xo.html
Gravity and magnetism share so many properties. I can see why physicists are always looking for a formula that ties the two forces. Also the strong and weak nuclear forces.
When you put the longer rod onto the shaft and manually spun it faster, could you attach a step gear/transmission that could work in unison with the large wheel to perpetuate the motion of the "drive" magnets and achieve a different result? I'm kinda dumb, so please excuse me if I seem like an idiot.
This device is a highly inefficient gear. Thanks for watching!
So glad to hear that the laws of physics hold true. Dear old entropy keeps throwing a hammer in the best laid plans.
Yes the laws of physics such as the basic law that perpetual motion is physically impossible and the scammers playing on the part of the human mind that really wants what is'nt possible to actually be possible . So energy is'nt either created nor destroyed just changed forms so it takes another form of energy(mechanical) to produce(convert) to electricity. The only "free" energy I'm aware of is absorbing electricity that surrounds high tension electrical lines and transformers but They will bust You for stealing that and the sun which at least presently nobody is charging any fees for . I suppose that will come about same time as when air starts costing money.
Finally a real person tells the truth. Thank you!
Glad you enjoyed the video! Be sure to check out my extensive video playlists for other great videos of interest to you, rate thumbs up, and share my channel.
3 more great videos:
th-cam.com/video/zwdydXyC-k0/w-d-xo.html
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
Thanks for watching
Be sure to watch my latest "Free Energy" video!
th-cam.com/video/OQ0MNWA1XuQ/w-d-xo.html
+Shaw kar
You can try all you like. Not going to happen.
+Shaw kar
Not. Going. To. Happen. I don't care how much you fiddle with the magnets or their placement, no, it's never going to work. Learn some physics, please.
+Shaw kar that's a good answer
yea you got to tap into zero point energy one of the easier ways to do that involves the use of radio active elements and crystals apparently
Don't talk about this, if the Ori find out about this technology...
Love it when science with " Proof " busts TH-cam content provided science !
Thanks for creating content showing why someone's scam is a scam .
We have tried many things these content creators have created which failed grossly , so Thank You !
That's great you exposed those fools who are fooling the fools.why would they do things that cheats or fakes
Well done. Well presented, clear and concise. Keep up the good work.
It’s a shame people got to do shit like that on the shows because you know people are really trying to learn something and you’re always going to have an asshole out there it’s just a real shame that people do things like this thanks for exposing that it was greatly appreciated again great video love the way you explain things in detail where anybody could really understand this thank you
Did a fantastic job. I have found myself that their are definitely FRAUDS out their. Don't understand why people's want to deceive. INSTEAD of ENLIGHTENED HIS FELLOW MAN. YOU SURE DID!! THANKS FOR SHARING
Thanks mate, people like you helps other not to waste time on bullcrap👌
Glad you enjoyed the video! Be sure to check out my other great videos below and share. Thanks
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/0rpaOqGY18M/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/WmYVFpsWfBc/w-d-xo.html
Honest man, thank you. Please keep it up, we need honest people in the tube, we have thousands of honest people showing how to, videos and I thank them but we always have a few that get a, I do not know what and BS the video, games for little brains. Thank you to all the people in u-tube that put good info on how to do or fix something in the car or home or special projects that someone may want to do. Thank you all, I know it has helped me many,many times, Lol. Many times😁😁😁😁
nice
A very interesting video,tried similar magnetic gadgets years ago ,no success.
baz Taylor Thank You For Watching! Be sure to share my videos with others, and rate Thumbs Up.
electronicsNmore The world needs more saints like you.Thanks!
May God Be With You Always!
Thank You. Unfortunately the world has an abundance of people that like to deceive others.
Loh K.S. If the world had more people like him, the world would be even dumber! The average IQ is 100, his is probably around that. If the average IQ was 150, then FailArmy would go out of business!
TheUltimateSlugger
I forgot more than you will ever learn. By the way, my IQ is 132. I had it tested years ago by a psychologist. Learn to speak kindly to and about others, or keep your mouth shut. People like you are not welcome on this channel.
I am just starting to learn about this stuff so please dont mind my ignorance. I was wondering if less energy is needed to power the above magnets then what is needed to power the wheel? If so, could a "cog" effect be used to multiply electrical output?
You never gain, you ALWAYS lose energy. Thanks for watching! Be sure to check out my other videos below. Many are better than this video. Thank you
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
Thanks for this, science vigilante. Get'em all!
Other videos that you'll greatly enjoy! Please share. Thank you
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
thanks alot for saving us from waste of our time and our money .
+M Ray
You're welcome! Please share my videos with others and rate thumbs up. Thanks
+M Ray Was gonna say the same thing.
Those God Damned Chinese hoax videos..
subtitles in spanish please freen..¡
if you spin in backwards a say "Rumpelstiltskin" it will turn straw into gold.
+brandon9271 Finally! A ray of truth!!! LOL!
+brandon9271 Still won't work. I happen to know!
+brandon9271 Or perhaps gold into straw.
+brandon9271 I think you have to say: "I buried Paul" while spinning it backward.
Green Genes LOL good one!
May be a silly question but why you have both north and south. I feel that is the reason its not working. dont you have just opposing to propel the wheel? I will try myself to find out but just curious :)
The configuration makes no difference, the device is just another YT scam and will never work. Thanks for watching
hmmmm..
Thank you.. you are a life saver.... Believe me ... You are!
Hi Chris. Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
"We should've taught them about physics. All of them. Now it's too late: they all have the right to vote yet too many chose to vote for perpatuated stupidity."
You did a big no no. You are using an asymmetrical block of wood as your base. Never NEVER use asymmetrical wood (in particular grooved lengthwise) on any free energy device.... unless your intent is to render it useless. Thumbed up and subscribed. Thank you for exposing these frauds.
I'd buy that for a dollar!
Do you recommend polypropylene ?
Would it be possible to have a rechargeable battery that powers a motor, to spin that axle and rig up the bottom wheel (12 magnets), to produce enough energy (EM field), to have overunity?
If somehow you could make the top axle have less friction than the bottom wheels axle or vise versa, so one would produce more energy than is needed, or the other require less output than is being used?
The reason I ask is because of the joule thief circuits you have made. Could they be incorporated into doing such?
No, you always lose during the conversion process.
Too bad a motor couldnt pull energy out of the air just like a condensor does with water.
Glad I ran across your video, now I can watch the rest of them. We lose power a lot in the winter so trying to come up with something I can use to keep us at least some power.... being broke sucks...LOL. Thank you for helping others to not waste their money.
A battery backup + inverter would be the cheapest and easiest way. You can use wall chargers to charge the batteries and connect the inverter to your heater, a fridge and some lights at minimum to stay comfy through the outage. Used car batteries are a cheap way to make a battery bank. Lithium iron phosphate batteries are a better, but more expensive alternative. Just make sure the chargers you charge the batteries with are designed for whatever chemistry you pick. You would need enough batteries for the average time your outages are too.
Thank you for your honesty and taking time to show the truth.
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Other great videos:
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/0rpaOqGY18M/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
th-cam.com/video/ErpS7C4gUVA/w-d-xo.html
Very well done mate, good explanation, enjoyed it 😀
Glad you enjoyed the video Steve! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/0rpaOqGY18M/w-d-xo.html
th-cam.com/video/WmYVFpsWfBc/w-d-xo.html
Thank you sir for exposing another fine example of deception in our society by being truthful thank you again
You're welcome Rob! For a big laugh, be sure to watch my "Free Energy" video playlist below, and share my channel with many others. Thanks
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
thank for saving me a lot of wasted time and effort good work !
You're welcome! Be sure to check out my wide range of videos below, and most importantly share. Thank you
th-cam.com/users/electronicsnmoreplaylists
Thanks for the informative video dude!!!!!!!!!!!!!!!!!!!! So.......I know you dont want to hear unqualified people commenting on issues they found with the setup. I'm not an expert and have no clue...but I will absolutely point out areas that I found kind of flawed and that I need explanation on. That is the whole point of TH-cam....video formatted information on some sort of material, and the social interactive discussion regarding said material. No hard feelings dude...just my observation.That being said....the magnet that spins in the wooden housing didn't seem to spin as freely as you stated. Your plate with the ball bearing is GREAT!!! But the "oiled" axle of the free spinning magnet has a very very sufficient amount of friction, creating enough drag for me to discredit this test. I DO NOT believe in free energy...but the control was compromised with this minor oversight. Put a bearing in the wooden housing to better control the experiment and re-run it.Just my novice opinion and comment.
Cheers!! Kona
I lived in Kona for close to 30 years. It was very cool..
agreement
guess we never got a reply on this? 2019
Thank you. Well done Sir.
Glad you enjoyed the video Paul! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
Question, if you have all the magnets on the plate oriented toward the same pole and at a 20 degree angle then the magnet on the stand stationary using the opposite pole at a counter 20 degree angle?
Read other comments.
@@electronicsNmore I like the machine you built and you demonstrate the flaws quite well, but if I'm not mistaken many trains and roller coasters work with magnetic technology and I realize those are electromagnetic but the principal should be the same if applied properly to your machine with the magnets you have and no electricity. I realize this is your machine and your video and you laid the groundwork clearly for me to build my own using your template with my own tweaks to try my ideas and I appreciate your reply although it's not exactly understood by me, I think with those changes and someone starting the wheel it should continue to spin. Thanks for your time.
this is def. not free energy but it might make one hell of a torque converter for a honda ;)
It would be a gearless drivetrain, no transmission needed. Have a magnet ring in place of the ring gear of the differential. Have another magnet ring coupled to the crankshaft with a linear bearing linkage connected to the accelerator. Instead of the accelerator pedal operating engine rpms, it would control magnet spacing. The engine could have a simple air flow governor like a lawn mower - set to always maintain optimum rpm. The engine could be designed to have a very narrow power band - producing unbelievable fuel efficiency. Of course, you would run the risk of mass destruction any time driving over a manhole cover or across railroad tracks, but there would never be stray nails on the road to puncture a tire. Gears are so old fashioned and quaint.
@@1Howdy1 Just put the assembly in a magnetic yoke to contain the magnetic fields.
If this motor worked production of it would be prolific. Thanks for this video.
You're welcome Billy! Be sure to share the video link with others. Thanks
I've rolled this project in my mind when i first saw these videos, but couldn't picture how it could possibly work (without a motor spinning the magnets, that is.) Just curious, how about if all of the magnets on the wheel have N facing up and the overhead magnet faces S towards the wheel. That might be repulsive :-D
It makes no difference what you do. A scam is a scam. Thanks for watching!
I’d still try it if I had the required objects.
Sounds plausible, wonder if I ever endure the experiment myself. 🤔🙂
Looking for a free wheel magnet wheel / is there a different pattern with North / South to achieve this
Subscribed because I love how you called bullshit on the other vids! Great work!
Great to hear! Be sure to watch my "Free Energy" scam exposing video playlist below and share. Thanks!
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
Thank you......... because I was so puzzled seeing that other guys video .I builder one like you have and it did not work
You're welcome! I have many great "Free Energy" scam exposing videos, so be sure to look over the playlist below. Thank you
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
This is a pathetic design and there are much more advanced examples from 1800 let alone modern examples! Look it up- this is a shill video to hide simple fact and logical thought.
@@100canadianmaplestirup8 Send a link to a decent one, I'm sure there are ones that work.
You forgot to plug it in. 😏
You a nut!
Tim Michaels 😂
😭😭😭😭😭 I’m cryin!
kkk, he is being funny
Its the truth though. The lower magnet installation should be on generator motor, powering an electromagnet to preserve the polarity of the larger wheel, and the energy also should be powering a drive motor and electromagnet on the upper magnet.
If you use "loose" magnets that are not electromagnets, the polarity will settle and freeze the installation, as the passing magnet changes the polarity if it not preserved by an electromagnet. Ultimately, there is 1 peak RPM that could drive this system to generate the highest amount of power, and more or less RPM would be inefficient. Essentially it is a "Digital Gearing System", with friction free cogs, and even if 100% energy was reused to power the motor and electromagnet this design is AT LEAST an electronic perpetual motion machine and at best, could power a lightbulb wirelessly.
Please, try harder. Because without electromagnets you arent doing a debunking service. All free energy "Digital Gearing Systems" must be wired with electromagnets and hand cranked to optimal RPM to actually benefit the results of the quest for perpetual motion engines and electrical systems.
If you do more tests on the device you made and tested the polarity of each magnet you will find the polarity to be continually reversed when the magnets are left stationary or when passing over other magnets beyond 1 full rotation. This changes the polarity - considering each lower magnet should be alternating polarity, futher tests will expose that you have failed to engage the driven gear, which is the upper magnet that would be powered by the lower gear system.
Great Vid. One can actually learn a lot by watching a vid like this. I liked it a lot.
Great Post Man! To all of you out there, magnets are no joke, and will do damage if not handled in a controlled environment, in a proper manner!
Glad you enjoyed it! Be sure to share the video link. Thanks!
Magnets are dangerous?????
?????
You know the earth itself is a giant magnet, right?
@@WeirdOne19142 well, yea, have you ever tried to use a compass with a magnet in your pocket? Very Dangerous indeed! :)
What if the magnets up high are stationary and at a 45 degree angle N down-ish. The magnets on the wheel are ALL N up (repelling) so in my mind, I see this creating a constant push. Would that work?
So, yes, the conservation of energy law is correct. This video is great for those who won't believe that until they actually see it for themselves. Your work and effort is definitely appreciated.
Glad you appreciated all the hard work that went into making this video! Please be sure to share my YT channel with others, and watch my other great "Free Energy" scam exposing videos below. Thank you
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/5lvFSQ2_4tg/w-d-xo.html
th-cam.com/video/BSdSDfOWbNs/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
@@electronicsNmore read comments again
Question... what happens if you have a wind wheel attached to the 2 magnets... will that make the magnet wheel spin? Then with some sort of stator... generate power?
Thanks for the debunking. I'm tired of these fake videos ...
Emmanuel Delahaye Glad you enjoyed the video. Please be sure to share my channel/videos.
Thank You!
How ANYONE can give this demonstration a "thumbs down" shows that some idiots just can't be taught anything or worse yet, don't WANT to learn !!!
Wait what if you made it similar to your Fidget Spinner video?
Is it possible to get more energy out than is put in? Like, when you spin the bar to rotate the tray, is there more of a potential return than what would be required from some other energy source to turn the bar?
No. Be sure to watch and share my "Free Energy" scam exposing video playlist below. I show videos much better than this one. Thanks for watching!
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
Thank you for this design info! Brilliant..
You're welcome Denis. Be sure to watch my other "Free Energy" scam related videos below, and most importantly share my channel with others. Thanks!
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
Denis Cesano u stupid or something
If that were an Apple product, they would claim that you are not using it right !
S P Absolutely !
Click bait title -.- Noo such thing as free energy folks..
Aza X This is a debunk video, if you actually watch it.
DarkAvatar1313 i did hence the misleading title
Aza X Well, his title IS followed by a question mark... and a tilde thrown in for good measure! Hence it poses a question, which the vid poster did a great job of debunking this scam.
***** I suggest you go to a college near you and speak to a physics professor. :-)
Quantum Leap You can't win with some people. Don't even bother. The title and video thumbnail is perfect. This video is about a "purported" Free Energy device shown on TH-cam. The image in the thumbnail is exactly what is shown in the video. People need to learn what real clickbait is.
Would this be an efficient way to generate electricity if the shaft was attached to flowing water to spin the top magnet? I assume traditional generators are way more efficient, but would this be a feasible way to generate electricity?
Very interesting! Thank you!
Glad you enjoyed the video John! I have MANY videos that cover a wide range of subjects, so be sure to look over my video playlist below and most importantly share. Thank you
Thanks mate!! Its really explain that there is no such free energy !!!..hello to all from philippines 🇵🇭
Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/0rpaOqGY18M/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
+electronicsNmore
Can you please provide a link to the video which caused you to go through all the trouble to replicate and test in this video you created here?
:
I never supply links to "Free Energy" scam artist videos. Supplying links only helps them make money by being a scam artist. Thanks for watching!
+electronicsNmore
How then can we see for ourselves what you are attempting to do, and if you are doing it correctly?
You make many references to some video which you lambast, yet refuse to share with us a link to it?!!
You are then no different than those whom you claim intentionally leave out crucial elements of its operation and construction.
If you do not provide this vital piece to the puzzle, then you are no better a person than the scammer
@@criticallook1352 If I made a video, you can be assured it was done right. LOL You sound like a "Free Energy" defender.....Sad.
Holy shit! This comment section is like the TH-cam special Olympics! XD
"Free Energy" videos attract the best. :-)
Love yur comment!
HI IM AMAZED THE NICE NEAT WORK THAT WAS PUT INTO THIS DEMONSTRATION THANKYOU
thanks man saved me some time. move on .
Be sure to check out my other great videos below and share. thanks!
th-cam.com/video/FmcH_69Y_ZY/w-d-xo.html
th-cam.com/video/WmYVFpsWfBc/w-d-xo.html
th-cam.com/video/8rj-emSUf7I/w-d-xo.html
th-cam.com/video/IjQu_hJv7UU/w-d-xo.html
Right ! Time to Move on UP !
where did u get all those magnets
he says where he got them from right in the beginning of the video. a microwave.
connoisseurus rex 7 microwaves*
Chlorox Bleach - silkroad6ownowfk.onion
Thank me later.
Im a mechanical engineer and LOVE the idea of a motor that runs just from the geometry of permanent magnets. Unfortunately I don't think it can be done because of the laws of magnetism and physics. I've tried, even using shielding that moves into place as one magnet gets close to the other to allow other magnets to propel the wheel.
Are you a real engineer cause I don't see how you can't make this work. Not this but something similar wit a really crude method