Tango Skiff XL Stitch and Glue Okoume Wooden Boat
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Shows beginning stage of current Tango Skiff XL project. Wooden Boat is being built with the Stitch-n-Glue method using Okoume 1088 marine grade plywood. Entire process at www.ncboatbuilder.com
Brilliant. Thanks for showing the overlap of the chines in front. I couldnt understand that elsewhere.
Great build. I saw a stitch and glue boat that used 2" peices of PVC pipe on the inside of every other stitch to prevent the "overlap" of the plywood....unless of course you are wanting that.
Boat take 6 sheets of Okoume 1088 Marine ply (4-3/8", 2-1/2"). Hull sides and bottom are made from 3/8", Transom is 2 layers of 1/2" laminated, bulkheads and seats will be 1/2".
Existe um pdf da imagem do barco para que eu possa fazer na Indonésia, obrigado pela ajuda
I wish there was a 17' model, that would be the one I would want to make, I could use a 15', but 17' would be better. What a great looking boat! I LOVE the chine, and the flotation/trim tabs of the rear end, VERY functional!
then someone would want a 19 then 21 and you see it just no end to it. Before long the guy would be building a 40 footer. Just build it 17 foot. Let me tell you how to build the easiest boat. Youglue the sheets together and get yor bottom laid out on a quarter inch sheet of metal. You tack 2 inch metal pipe right along side the bottom o the boat. Then you cut the plywood the height you want. I would cut it the same height front to back. You use a hydraulic jack and you push the sides up against the pipe and drill small holes and use electrical ties to securethe sides. Then you have tocut down a tree andyou need two pieces of wood 3 x 3 by 25 feet. Now the wood will be wetbut you want it wet to be able to conform to the sides of the boat. You screw into the sids of the plywood by goin through the thick wood. You'll want this t dry for a couple months in the Summer. You then loosenup the screws and use marine glue and then screw in from the plywood sides of he boat. You'll tighten up the screws in the bottom that go through the hick wood into thebottom. Then put your cross members in and glue them and screw them down. Then putyour gussets in and washboards and glue them all down. Then lip the boat over and Then put four inch srews through the bottom into the sides. I've built boats this way but buil them with aluminum now. Aluminum Ican weld and it doesn't have to dry and you don't have to pain and I can get 24 feet lengths of aluminum. The bad thin about aluminum is fishing when the aves hi on the sides or you drop somehig it is so loud.
Barry, according to Tango LLC's website, they do offer a 17' Tango but nothing larger. The only problem is no one bothers to write back when you contact this company via email.
Well done 👏
Where did you get your plans. I love the way that boat looks
I'm trying to ilt a tango but dont no how to cut the batom part it's a 12 " so I cut the ply 4 "
i was hoping you would show step by step progress of the build :(
I LOVE the zip ties that would be my idea also !
The same here why show a job half done why not show it from the start and step by step. It is far more entertaining that way and you have a good voice to carry it
I congratulate you on your boat and craftmanship. Can you just give me the cns plan of the bottom shell?
What are the tabs sticking out of the transom for ? I’d like to build a 14’ flats boat using the stitch and glue method, are you using 1/4” in. Luan plywood on the bottom and sides? My big worry is getting it registered and checked by the coast guard to make it legal .
Ese barco es para el mar? O solo para lagos y aguas tranquilas
Hi, How can l get that project
When is the glue or marine epoxy applied to the stitched sections of this boat, as I haven't seen any other issues about this boat on You Tube? Would like to learn all that there is to do and, construct a similar boat here in the Philippines, when I have nothing but time on my hands at Age 68. Nice video too!
Posso saber o tamanho do barco? comprimento, largura e altura. Sou da Indonésia. existe um pdf da imagem, obrigado pela atenção
very nice
No frames, how does it stay together from twisting and straining?
good video
Good morning sir
Thankyou for the video
i want to make one like yours
Sir if possible please send me the plan.
The skiff is very nice, i really like it. What's the situation with the XL model? Show some more videos. I want to order one but i need to see it before.
You can buy the plans from Hank Bravo at tango skiff.com! This video is of a Tango 14 which was built for a Nissan 9.8. Plywood thickness is 3/8" on hull and 1/2" on seats and bulkheads.
Gostaria desse projeto estou super afim de fazer onde posso encontrar
Saludo.
Vuanto valen los planos? O cuanto vale el contrachapado enviado a Colombia, agradezco tu atencion.
How many people fit on that boat,
How did you get the front to curl upward?
Did you have to cut the front plywood into arches or when you pull the front in does it pull the front up?
Thanks
nice work man. What are the thickness of the plys you are using?
Hank Bravo has just recently drawn plans for a 17' version. They can be found at tangoskiff.com
Would you recommend stitch and glue if you were going to make a boat out of 3/4 plywood? If you did make it out of 3/4 plywood. Would you have to add any bracing on the sides?
Задняя часть еще не вся собрана?
how many yards or feet of fiberglass did it take total for this project?
I have another small boat in process. What were the products used for the finish and or prep coat.
👍👍👍
👍👍👍👍👍👍👍👍
Good day sir my name is daniel pirela wanted to do my own boat and I like the model, I wonder if you have plans and if you can them to me.
QUAL O CUMPRIMENTO, LARGURA E ALTURA DESTE BARCO
Tambem quero saber.
Where can i buy the plans , i would be interested in building one of these
will a 15 hp short shaft motor work with this boat?
Yep, as an Emergency kicker
👍👍👍👍👍👍👍👍👍👍👍👍
Vende o projeto
Is it possible to share the plan;?
hello, what are the dimensions of the boat?
This is the 14' Tango stretched to 15' maximizing the required 6 sheets of plywood as needed to build the 14' but in a 15' version.
@@JEChaseConstruction I'm from Brazil, I really liked this project, I'm looking for the measures for me to do it, I'm going to try to build a boat like that in honor of a cousin of mine who loved to fish, but it's gone with God, thank you very much friend God bless you
How hard would it be to shorten this boat to 9'0".
Chain saw would be really fast.....
Hey
Boats can put your name to the Web site and I live in turkey
Haii
Cant u make a tango small cabin
May i see u design pls .
TQ
Berapa ukurannya?
Plywood? Mm
where can I get plans
www.tangoskiff.com
Tim, I just posted a comment at the top of the screen as to how to contact www.tangoskiff.com (as all they show on their website if you have questions - is an email address). No phone number whatsoever. I have an unusual situation (as shown at the top of the page) and, have written numerous emails to Tango LLC and, haven't received any email responses back as to how they ship their plans out. Unsure if Tango LLC is still operating or not, but I seem to think they are, as you can order the plans on their website but, no one is reading their emails - which is a major concern to me (and, possibly others that want to purchase their plans or, just communicate with someone).
Paul, the plans are in PDF download only (no paper ones sent) if you go to the website, the plans link, then to the boat plans you want.... there is a "buy now" button which takes you to the Payplal login. After paying through paypal, you will get the download link for the PDF.
Jonny, thanks for the info, as it's well appreciated. Have recently been discovered with a medical set back as I was diagnosed with Peripheral Neuropathy (secondary issue of Diabetes Mellitus Type II) - a direct result of my being exposed to Agent Orange during my three tours in the Vietnam Theater. So, unsure now whether I can fulfill my boat building dreams or not, as my physician has instructed me to NOT be on my feet for much more than 30-minutes. Thanks again for everything.
Jonny, thanks for the info, as it's well appreciated. Have recently been discovered with a medical set back as I was diagnosed with Peripheral Neuropathy (secondary issue of Diabetes Mellitus Type II) - a direct result of my being exposed to Agent Orange during my three tours in the Vietnam Theater. So, unsure now whether I can fulfill my boat building dreams or not, as my physician has instructed me to NOT be on my feet for much more than 30-minutes. Thanks again for everything.
👍👍👍👍👍👍👍👍👍👍👍