Toyota Tacoma 01-04 LED Tail Light Bulb Upgrades - Turn Signal, Reverse, Brake

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ม.ค. 2025

ความคิดเห็น • 65

  • @r.michaelmarkham9994
    @r.michaelmarkham9994 6 ปีที่แล้ว +6

    Video turned a multi hour job into a 5 minute job. Thanks for posting.

  • @monoXcide01
    @monoXcide01 2 ปีที่แล้ว

    A job done right is a job you only need to do once. Just got my dad's 2001 Tacoma with only 47k miles on it. I'll have to give this a shot. Thanks for the video!

  • @ns671fr
    @ns671fr 6 ปีที่แล้ว +19

    you can just add an LED flash relay. easier and cleaner and reversible.

  • @dano4572
    @dano4572 4 ปีที่แล้ว +1

    I like the highper flashing!!! Gets people's attention!!!!!!!!!!!!!!!!!

  • @germanbenitez101
    @germanbenitez101 5 ปีที่แล้ว +7

    If I just change the reverse and brake light, do I still need a resistor?

  • @everardocamacho5063
    @everardocamacho5063 ปีที่แล้ว

    I got a 1989 toyota truck what led bulbs need for turn signal, brake, reverse, thank you I hope I got an answer this time,cheers from ontario ca

  • @everardocamacho5063
    @everardocamacho5063 2 ปีที่แล้ว

    Do I need a resistor for every ligth buld? For the rear and the front, thank you,cheers from ontario ca

  • @nolanbrown6894
    @nolanbrown6894 2 ปีที่แล้ว

    On your website it says that you can also use 1156: GTR Armor lights for the rear turn signals. Do these lights and the ones in this video both work for the rear turn signals?

  • @jamesrodolee03
    @jamesrodolee03 6 ปีที่แล้ว

    Does the 1000 lumens reverse light come like the carbit bulbs in this video??

  • @luiscastilloflores2116
    @luiscastilloflores2116 5 ปีที่แล้ว

    saludos desde Costa Rica....Pura Vida.....Gracias por el video.

  • @ryderolander2463
    @ryderolander2463 2 ปีที่แล้ว

    What size resistor is that? You have multiple on your website

  • @DavidAlvarezDelgado
    @DavidAlvarezDelgado 5 ปีที่แล้ว +1

    How do you remove the 3rd brake light so you can put a led

    • @kennethgrimes5494
      @kennethgrimes5494 4 ปีที่แล้ว

      Its a bitch you got to remove the headliner and to do that you gotta remove a bunch of shit.

  • @floridag8rfan
    @floridag8rfan 5 ปีที่แล้ว

    Do the super bright reverse lights have any heat issues in these housings that you're aware of?

  • @kyleshook
    @kyleshook 3 ปีที่แล้ว

    Will these reverse lights work on the 1996 Toyota Tacoma? Or if not could the tail light housing be upgraded to the 2001-2004 to make them work?

  • @jason4832
    @jason4832 4 ปีที่แล้ว

    Also check the molex plug...i found the pins corroded inside...could cause a bad connection

  • @H8er-Maker
    @H8er-Maker 6 ปีที่แล้ว

    Where would you mount load resistor when upgrading interior cabin light? Exact same truck as this plow truck.

    • @HeadlightRevolution
      @HeadlightRevolution  6 ปีที่แล้ว

      You wouldn't need any load resistors for your interior lights.

    • @H8er-Maker
      @H8er-Maker 6 ปีที่แล้ว

      Headlight Revolution
      With LED installed in main cabin light, I have to turn on 1 of the map lights for main light to glow 100%. Otherwise it's 50%. I appreciate your help with this issue.

    • @HeadlightRevolution
      @HeadlightRevolution  6 ปีที่แล้ว +1

      That's interesting. You should get in touch with our team. We don't have those issues with our bulbs.
      sales@headlightrevolution.com

    • @MaxiiBoii23
      @MaxiiBoii23 6 ปีที่แล้ว

      You got some defective LEDs lol

  • @raulperezjunior1
    @raulperezjunior1 6 ปีที่แล้ว

    Is there any conversion kits for “insert and turn clock wise” (carbide) to the pressure plug-in bulb (gtr 1000 lumen reverse lights)?

    • @HeadlightRevolution
      @HeadlightRevolution  6 ปีที่แล้ว

      What style of bulb do you need for your specific housings?

    • @raulperezjunior1
      @raulperezjunior1 6 ปีที่แล้ว

      Anything that fits this type of housing for spyder brand, part # spy5007872

  • @charlescoker7752
    @charlescoker7752 4 ปีที่แล้ว

    I have a 1999. You have something similar to this to fit it?

    • @HeadlightRevolution
      @HeadlightRevolution  4 ปีที่แล้ว

      We can totally get you set up there, I have linked the products that you will need below! Let us know if you have any other qustions, we are here to help!
      Brake Light Bulbs: www.headlightrevolution.com/1157-gtr-lighting-armor-bulbs-LED.BUL.1157.ARM_2?quantity=1

  • @jesusmaldonado2902
    @jesusmaldonado2902 6 ปีที่แล้ว +1

    Would the led reverse light kit fit a 1994 Toyota Pickup ?

  • @kenkphu
    @kenkphu 5 ปีที่แล้ว

    can you guys please do a set for 3rd gen 4runners? 1996-2002, I'm sure there will be a large percentage of folks will be interested

  • @johngonzales2043
    @johngonzales2043 5 ปีที่แล้ว +1

    I just ordered tail lights for my 2001 Toyota Tacoma now I need head lights...

  • @sir_cornholio5
    @sir_cornholio5 5 ปีที่แล้ว

    will these bulbs and same process work for a 1995 Tacoma? I'm assuming it will since it's all the same body and what not but would like to triple-check before purchasing. Thank you!

    • @vonzipper2712
      @vonzipper2712 4 ปีที่แล้ว

      Wow you have the original 95 1/2 model year!! I would double check bc I had a 98 mode year and now a 04 and the light housing is different from what I remember... the 1st gen Tacoma went through a few face lifts and I believe one of the bigger changes was taillights and grille...

  • @ricardojuarez291
    @ricardojuarez291 หลายเดือนก่อน

    Where can i get the tail lights diagram?

    • @HeadlightRevolution
      @HeadlightRevolution  หลายเดือนก่อน +1

      Looks like Tacoma world has a diagram for that truck!
      www.tacomaworld.com/threads/1st-generation-toyota-tacoma-2003-left-rear-tail-light-wiring-diagram.636544/

    • @ricardojuarez291
      @ricardojuarez291 หลายเดือนก่อน

      @HeadlightRevolution thank you I'll go through that today o tomorrow cuz that truck needs to be on the road ASAP..

  • @LemusStudioNetwork
    @LemusStudioNetwork 5 ปีที่แล้ว +1

    Hello i need help, i have a 97 Tacoma where can i buy it, i live in México cancun

    • @HeadlightRevolution
      @HeadlightRevolution  5 ปีที่แล้ว

      Check out our website! We ship to Mexico!

    • @LemusStudioNetwork
      @LemusStudioNetwork 5 ปีที่แล้ว

      @@HeadlightRevolution REALLY, thats nice!!! But do it fit on a tacoma 97???

  • @JoeGoldberg577_
    @JoeGoldberg577_ 3 ปีที่แล้ว

    Hello, Will the reverse light fit my 96 tacoma ?

    • @HeadlightRevolution
      @HeadlightRevolution  3 ปีที่แล้ว

      We have an option for you! Reach out to our CS team!
      218-755-5200
      Sales@HeadlightRevolution.com

  • @a.guzman1512
    @a.guzman1512 3 ปีที่แล้ว

    I swapped my oem taillights for some after market ones. The after market ones use 1156 and 1157 bulbs where as the oem uses 921 1156 bulbs. Everything was plug and play. But now my dash, ac unit and shifter lights come on when stepping on the brake pedal. If anyone can help I'd appreciate it thanks.

    • @SurfSailKayak
      @SurfSailKayak 3 ปีที่แล้ว

      I've read that this can be caused by noisy LEDs. I believe there is a filter you can put on them that should help. (I'm no expert, but I read this while looking for headlights)

    • @a.guzman1512
      @a.guzman1512 3 ปีที่แล้ว

      @@SurfSailKayak I had a couple bulbs in the wrong sockets. An 1157 and 1156 were not in the right ones lol 😊

    • @SurfSailKayak
      @SurfSailKayak 3 ปีที่แล้ว

      @@a.guzman1512 Glad you figured it out. Just swapped some taillights this week and noticed they etched the bulb sizes on the taillight housing. Good place to keep it if you ask me.

    • @HeadlightRevolution
      @HeadlightRevolution  3 ปีที่แล้ว

      Glad you got this figured out! 🤘🤘🤘

  • @raulperezjunior1
    @raulperezjunior1 6 ปีที่แล้ว

    Not compatible with “spider” brand tail lights used for a 2001 tacoma. I think the reverse lights are only compatible with stock tail lights

    • @HeadlightRevolution
      @HeadlightRevolution  6 ปีที่แล้ว

      Taillight depths may vary depending on the housings, the Spyder taillights are too shallow to fit the bulb properly, they fit OEM perfectly though!

    • @raulperezjunior1
      @raulperezjunior1 6 ปีที่แล้ว

      Headlight Revolution please send me the link to the EOM , I’ll be exchanging these. Thanks!

  • @1silvervespa
    @1silvervespa 2 ปีที่แล้ว

    Dab of Dielectric Grease on all sockets ....
    Those are not going to get touched again for ages .....so protect with the grease ....

  • @loganh.1927
    @loganh.1927 6 ปีที่แล้ว

    Wow! Wish I had seen this before I got those crappy autozone leds. Can't see crap with those. I do have pods on my headache rack but those are too much for most parking lots lol. I have a 99 tacoma so I'll have to try these out soon! Also going to aftermarket tail light housings so I hope these transfer over.

  • @brianavelar2505
    @brianavelar2505 2 ปีที่แล้ว

    Either i was sent the wrong set for my 01 tacoma or they changed the design because mine did not look like this. I had a gray rubber not blue. While these are plug and play, its a pain to get the led to fit perfectly in the socket. The rubber around the bottom of the light is too thick and nearly impossible to fit in all the way. Mine are half in the socket and just left them like that.

    • @HeadlightRevolution
      @HeadlightRevolution  2 ปีที่แล้ว +1

      The gray rubber bulbs are the newest generation, you have the proper set. This is an older video where the older reverse light bulb was used. They are a tight fit in the housing but it's made to be this way to prevent water intrusion! The trick is to remove the rubber collar off the bulb and insert this first. It'll take some convincing to fit in there but you'll get it. Once installed, simply slide the bulb back into the rubber collar and you should be good to go!

    • @brianavelar2505
      @brianavelar2505 2 ปีที่แล้ว

      @@HeadlightRevolution damn this worked like a charm. I had em half ass on this whole time. Thanks

  • @JLeeChron
    @JLeeChron 5 ปีที่แล้ว +2

    Its illegal to use that Truck to plow snow.

    • @kennethgrimes5494
      @kennethgrimes5494 4 ปีที่แล้ว

      Maybe where your from but not in Illinois.

    • @HeadlightRevolution
      @HeadlightRevolution  3 ปีที่แล้ว

      Oh?

    • @JLeeChron
      @JLeeChron 3 ปีที่แล้ว

      @@HeadlightRevolution lol, y’all don’t get it… 1st gen best gen. Tearing up a grail 😆 …
      Yota thing