2009-2018 Ram Headlight Bulb Change Head Light Removal READ THE VIDEO DESCRIPTION
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Hey, motorheads. This video shows you how to change the headlight bulbs on your 2009-2015 Ram.
NOTES: Push white tab UP to release headlight, not down.
Parts (non HID assembly):
- H11 Low Beam Bulb
- 9005 High Beam Bulb
- 3157N Front turn signal bulb
Tools:
- Flat Head Screw Driver
- Two Long Ratchet Extensions
- Ratchet
- 10mm Socket
- Electrical Tape
---
If you like this content, check out more videos in our playlists below! Be sure to check out our other playlists as well, including Ford F-Series repair videos and Fix It Friday!
Tool Review: • Tool Tuesdays
Ford F-Series: • Tool Tuesdays
Autel Scan Tools: • Autel Scan Tools
Small Business Spotlight: • Small Business Spotlight
(Dodge) Ram Service Series: • Ram Service Series
---
#RevitAuto #HeadlightBulb #DodgeRam
---
If you're in the Greater Washington D.C. Metropolitan area and in need of car repair services, be sure to visit revitauto.com to schedule your service today!
RevitAuto Contact Info
(202) 827-5955
info@revitauto.com
😁Thanks for watching! Here are some other RAM tutorials that you might be interested in.
Change the oil on a dodge ram 3500
th-cam.com/video/MEiKe8ZKBO0/w-d-xo.html
Change the front brake pads and rotors 2018 Dodge ram 3500 Duely
th-cam.com/video/o7f7HjkrOqU/w-d-xo.html
How to change the Air Filter 2015 Dodge ram 1500
th-cam.com/video/D47OTKT--GA/w-d-xo.html
2012 Ram 1500 Oil Pressure Sensor Replacement
th-cam.com/video/Kkj-nVlmG5g/w-d-xo.html
2009-2018 Dodge Ram Transmission Fluid & Filter Change
th-cam.com/video/QReFPez1njw/w-d-xo.html
0😅😢⁹😊😮
Thanks for not knowing up from down. The white clip moves UP NOT DOWN to remove! I watched your video and basically destroyed the clip following your dumbass directions you low life! You owe me money!
Everyone’s commenting that it was easy and didn’t take them long. I have to say, when you said push the white clip down at the beginning of the video i thought you meant push it toward the ground. I fought it for 30 minutes until i watched a different video where he said to push up. After tht i was able to figure it out and was a breeze. Came back to watch and towards the end of the video you said push the clip up. Great video. Thanks.
Ha man I was just gettting ready to grab the sledgehammer when I read your comment thanks ha
yep, same thing with me, today.
😂@@richardguarneri6828
My boyfriend and I spent at least 30 min yanking the hell outta the white tab, this comment probably saved us from breaking the headlights 😂thank you
Yea I was pulling down. Thanks
First I would like to say "THANK YOU" for this video. Saved me a bunch of time and headaches. The only thing that I would like to add......to make it easier to access the fender well cavity turn the front wheels to the opposite side you are working on. Turn to driver side for passenger wheel well and turn to passenger side for driver side wheel well.
He said that.
Video instruction was spot-on, thank you. Watched a different video of a dude that said you had to remove the grill and radiator shroud, I thought, that can't be right.... Glad I found this.
Really Glad this video helped! Happy Motoring!
JPeezygoinham it happens! We service a fleet where the previous mechanics broke a few of the slide clips off. And they were still very secure in the housing
haynes manual has you removing 6 plastic clips from around the headlight housing........ ummmm
@@Thejbelow Can you email a photo of that page? Info@Revitauto.com
@@Thejbelow They say the taking the grill off is the way. No everyone can take it off. Its a bitch to get the nut back in..IMO
I had previously taken my truck to Firestone to replace a bulb. I was told by the tech that it was one of the hardest bulbs he’s ever replaced and it took him 2 hours.
After watching this excellent video , I replaced this one myself in 10 mins! Thank you for this !
Be sure to share this video with that tech! It took me a couple hours to figure it out the first time too!- Blair
No need to remove the grill! Great explanation and glad you explain why you shouldn't touch the bulbs. Two thumbs up!
JC Whitney thank you for the compliment. Are you the parts supplier JC Whitney? If you are doing this yourself just be sure to flip the tab the right way! And read the video description! Happy Motoring
Yep, that's me. Hi there, Revit Auto!
No way! I would love to talk with you! Can you give me your email or phone number?
@@TeamJCWhitney Call us back! Lets do some videos for you all!
I like that black tape trick you did.When keeping your bolt on when re-installing
your video was awesome it took me 5 minutes to change out my light headlight bulb and I didn't even have to pull my grill or anything else all I can say that was awesome my dealership said it would cost probably a hundred and some dollars to change my headlight bulb and a local automotive shop told me it could cost me up to $155 plus the light bulb thank you so very much for your video
That's friggin ridiculous. The mechanic would probably do this shortcut procedure anyway and charge you the chilton book time.
Yea but you need to push up to unlock the clip he said to push down and I almost broke the clip
That's the best trick I've ever seen for the screws... black tape ... thx bud
This was a big help I have a 2018 ram this is the first ram I ever had this is Quite a process for a headlight compared to the other trucks I’ve owned but your video made it quick and simple thank you
Thanks Chad! I am glad this video helped you! What I thought was going to take me a few minutes to do ended up being an entire afternoon the first time. So I knew this video was much needed! Happy Motoring!
Blair
I’m glad you made this video I on a 2010 1500 4 x 4 and have never change bulbs so now I can go ahead and change all of them thank you so much now I don’t have to look it up. Your video really has made it easy for me and save me lots of money to have it installed being that I am 76 and not as agile as I used to be lol
great job..thanks so much..lady next was told it would cost her $150.00 dollors to get her bulb replaced..now I can help her for free..gotta love it..thanks again
It can get expensive! Happy Motoring!
I have a 2011 and had to take the grill off to get the light assembly out.. next time I will take the grill off first as it provides great access to the mounting bolts of the light assembly. Info in the video is spot on 👌
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Just to clear it up. I was struggling a while till I figured out That white clip needs to push up to release. Down is lock. Great vid though
2015 Ram 2500 Heavy Duty 4x4
Awesome video sir. I love the way you explained every step. Most people skip little details assuming that everyone knows it or they just forget to include it because it’s a small detail… sometimes the small details are the most important ones. Thanks again!
Glad this video helped! Is your truck gas or diesel?
Thanks so much for this video!! 2014 Dodge Ram here. I used a claw plunge grabber to catch the bolt in the lower hole (after loosened with the extension socket) and to realign when replacing. Also took a picture of the bottom last button to snap out. It took a little muscle to pop that one out since it was a “ball and socket” type joint with a metal post into tight plastic socket.
No idea what tool that is! But cool and awesome it all worked out! Happy Motoring- Blair
thanks for this.i was under the impression you had to take the front grill off to do this. this saves allot of time
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Excellent video, very easy to follow. Definitely needs to be updated to note TAB goes UP, not down. As well, maybe add a note that there are other videos that show removing grill. Totally not needed. I have 2015 Eco Diesel. The only thing different is the cover for the light bulbs has bolts instead of a cap. Other than that, so simple. Low beam is the blue, round light, high beam is the deep, recessed one.
Great video. I always miss a screw and break something so you video helps me amazingly. Thank you 👍👍
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Thank you. Your great video saved me a trip to the shop. And so nice to not have to remove the grille.
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Awesome thank you! Couldn’t find the “white” clip, but turns out mine was really dirty. Lol. Took about 5 minutes per headlight, thanks for saving me big $$ at the dealer!
Glad it helped! It took me forever the first time! FOREVER!!! Haha Happy Motoring - Blair
So do I press the clip up to pull out the headlight or press the clip down? Had another video saying press up
@@dylanhenry5237 push up to release!
Much appreciated. Was getting ready to tear my hair out wondering how to get at them.
Glad it was helpful! Don't forget to like and subscribe for more helpful tips/repairs!
Awesome. Thanks for the instruction. I just switched over to LEDs in my 2015. They needed changing. They were burnt looking. Same as the tail lights. 207,000kms on the truck. Only real thing I replaced.
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Great video . Gets right to the point . Easy job.. Some videos show them taking the grill off & you don't need to . Excellent job.
BruceCece Morris glad this video helped! Happy Motoring!
That video was very helpful. Thanks. Other videos would have me taking the grill and bumper off.
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Thank you for this awesome video. I especially liked the tip about using the electrical tape for holding the bolt in the socket.
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Thank you for sharing this video ! My driver's side parking light blew out on my 2010 bighorn. U saved me a ton of aggravation in dealing with it. Other videos show you how you got to take off the front grill, & radiator cover. What a pain in the ass just to get at a bulb ? That's just ridiculous. Your video made it so easy & painless man. Again, Thank you for putting this video out here...
Have a 2010 Dodge RAM. Great video. So glad I didn't remove the grill. Piece of cake
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Watched like 3 other videos and only this one made the most sense. Thanks a lot
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
2015 Dodge Ram Big Horn 4x4. Thank you so much for the video you made it effortless. Saved a lot of time without pulling off front grille which is what most of these videos say. Thanks
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
very helpful i spend 2 hours trying to replace the marker lights and couldn't do it until i watch your video only took me 20 minutes thanks
Glad this video helped! The first time around it took me a very long time too! Happy Motoring!
Thanks. Big help. In my 2017 RAM 3500 Laramie I did not have to remove any plugs - just opened the. trap door. And I had 5 small bolts to remove to get to the bulb instead of just unscrewing the housing. But still very helpful.
Thats awesome Thanks for posting! Happy Motoring -Blair
Thanks for this great video. After watching the video twice, took me less than 20 minutes to replace my bulbs on my 2011 RAM.
Hardest part was finding the right angle to get the assembly out of the front of the truck while not scratching the paint. I can see why people say taking the grill off makes it easier. I found I didn't need to. Just carefully moved the assembly around until I found the right angle. Saved me a few minutes versus taking the cover and grill off.
Glad this video helped! Sometimes I pull the grill off when doing this repair. It depends on how stuck in the grommets the headlight assembly is, and how strong my arm feels that day. Happy Motoring!
I had no idea how to get that hard to reach bolt back. That tape method was huge. Dont know where you learned it but thanks!
Glad we could help. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
www.youtube.com/@Revitauto?sub_confirmation=1
Great video. Thanks for showing how easy it is to change the light bulbs .
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Just did my lights last night (upgraded to better bulbs). Do yourself a favor and pull off the grill before you try to remove the headlights. Makes removal much easier if they haven't been pulled out in a long time. I could not get mine removed from pushing on the back. If you don't remove the grill, the light housing will grab the grill and they won't pull out easily. Grill is only held on by 4 10mm bolts and well worth the extra 2 minutes to remove. I promise you, unless those headlights have been removed by someone else, it is much easier to do.
Upgrading bulbs is the most common reason that we are replacing bulbs in those trucks. Thank you for posting that tip! Of the ones we have replaced, we have not had any issues with removing the headlight assemblies but I can see where that could become difficult. Happy Motoring!
I just removed mine without removing the grill and I wish I had bothered reading through the comments because I pretty much scratched my grill the lower screw wouldn't come out on it's own I had to pull pretty hard to take it out ! But anyways yes removing the grill would have been the best choice!
Yea, couldn't get the bottom bolt to come out after I loosened it, so I took the grill off. Just remove the cover on top,, 4 X10m bolts and give it a yank on the corners.
Crakkers 2017 too late
Was about to post this, since it better to replace both headlights at the same time. Might as well pull off the grill for easier time.
Thanks. I have been searching for a good way to do this myself, because a garage has a set minimum that is expensive just to change two bulbs.
Yeah it is tough, everyone has to make money too! We charge a small fortune to do this and it hurts to do it. So I made this video! - Blair
Just did this on my 2013 ram 1500. I took the grille off too because the vertical bolts didn’t want to come out smooth. Great video. I replaced all the bulbs with leds while I swapped the driver side housing.
Hi I was wondering what brand leds did you use. I know some can have issues with drl flickering with ram's and it seems every brand either works plug and play or does not. I'd like to know so I can install on mine when I do this
You’re the man for this. I was dreading having to do this. Just got it done in Maybe 10 minutes because of you.. ha
The first time it took me 2 frigging hours. I was so lost!
Similar to others, found that the clip must be slid UP to release the light fixture; and slid back DOWN to lock it in place (for a 2012 RAM 1500 Sport, anyhow). Also, as a note, the white retention clip is located approx. 2" above the back of the parking light bulb, for a distance reference; very difficult to actually see the white clip through the little access panel in the wheel well,
; you really have to find it by "feel".
Awesome help and comment! THANK YOU! Happy Motoring-Blair
Thank you for clearing that up. because at 0:51 he says "pull down" when he was removing it and at 6:01 he said again "pull down" when he was reinstalling it. Also I might add its probably best to test the lights before you put it all back together again.
Thanks man I pulled it down and it wouldn't come out, once I pushed it up, np
good video. not so talkative as many on here are. loved it
Thank you sir I was not trying to take the whole grill off to change a bulb
The white tab is locked when pulled down and open when pushed up. This makes a BIG difference.
Thanks! I noted when I was doing this I was looking upside down! And that’s why I got it wrong!
I changed the title to say read the description and put it in the description section thank you!
Video was very handy. Knowing what to do is half the battle.
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Great video and good tip on installing the aluminum screw with tape on the head.
It saves a lot of headaches! We are compiling a mechanic hacks video here shortly!
Thank You! Great video! I had no idea how to do this until I watched this. Also, great tip on the tape to hold the screw in the socket!
Hey! Thank you for commenting! Glad that little trick helped you out! Happy Motoring! -Blair
I tried this for quite a while because giving up and removing the grille. Took no time at all to remove it and it made it super easy after that, I'd recommend just taking the grille off it's really not that difficult/time consuming but the rest if the vid was great
ok guys, just wanted to say thanks and if this 72 yr old soon to be great Nana (don't like grandma) can do this ANY one can. Might have taken me longer but it's done and I can truck on!!! thanks again. 9-10-20
Hey Jeni!! That is awesome! What a Great Nana you are!! Just an fyi it took me about 4 hours to film this, and it took me almost three hours for me to do the first one! Talk about a super hardcore killer!
Thank you for the video. I never would have found that damn compartment under the tire well. I had to replace the whole headlight assembly for my vehicle inspection on my 2013 Ram 1500.
batosai117 really glad to hear this video help and even better it's saved you money. Happy Motoring !
I have a 2014 Ram. The clip was black, and up waaay higher than you think it would be. A normal 10mm socket (not a long one) will just barely squeeze into the top bolt spot, and you'll need two 6-inch extenders to reach the bottom one.
I don’t know if it’s different on the truck he does in the video. But the white tab from the fender well you have to release. It unlocks by pushing strait up to unlock and straight down to lock back relative to the ground. In the video he says to pull down to unlock. This cost me a bit of time and frustration. Maybe it’s different like I said. Mine a 2018 ram 1500 big horn.
I had to push the white tab upwards to unlock the headlight. Thanks for the video though.
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Very useful information that helped me to decide which course of action I WOULD TAKE. Thank you!!
ALEX KISKIS glad this video helped! Happy Motoring!
Finally a video that’s simple and to the point!! ✌🏽
Thanks for the video. Described exactly what I needed to be able to do the job.
We're happy to have helped you!
This is my first dodge ive owned and honestly not a fan at all that is crazy they made it that hard to change a bulb! But your video helped so much thanks!
Glad I could help! Why dont you like your ram?
Just did my light that had water in the housing..great video
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Best video I've found on this subject, well done and thank you.
Wow, thanks! I appreciate the feedback! Happy Motoring-Blair
Thanks, I just replaced both my headlights with the help of your video.
Great! That is awesome!
Great Job on the Video! Step by step and detailed informative. Start To finish. Simple =, To the Point.
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Thanks so much for the video. The first side took me a while but the second was a snap. What a stupid design. I miss my ford.
Glad this video helped you! Haha its a rough design but it helps with keeping all that motor cool with the big wide front end! Happy Motoring- Blair
ahh hell yah! saw 2 videos where they removed the grill. appreciate my guy 🤙🏼
Glad I could help Happy Motoring!!!! My Guy!! -Blair
Absolutely ridiculous how Ram made these lights. I can do an oil change on my Ram 10x faster than this, not to mention having to by an extension for the bolt (probably $20). Good video. Bad Ram.
lol seriously complaining about a clip, two bolts and needing an extension? I think you'll survive. If you don't own several extensions for your socket sets, you probably shouldn't be working on your truck...
then you're doing it wrong ;)
Zack Evans all Ive been doing to my piece of shit Ram is working on it.....never again
@@maidenrulz73 really? I've put 105k on my 14, in 4 years and have only changed the water pump
@@leeballangee2356 friday truck I guess.
Thanx for this Video. I'll be replacing a low beam bulb later today.
No problem, please let us know how it goes!
Awesome the video that keeps on giving just changed my 2014 headlights got to love TH-cam 👍👍
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
I really liked the previous iteration of the Ram headlight. Just unclip and remove the bulb. No need to remove the whole assembly.
+Jerry Mander some engineer somewhere thought this was a better idea, and would save them money. At least they modified the fender liner to allow easy access to the slide clip holding the light it. It would be a real pain if that was not there.
perhaps the lamp housing will see less water penetration, having the seals less exposed. But I won't know that for a few more years.
+Jerry Mander some engineer thought it was a good idea ;)
Good job man. Thanks for taking the time to show us this. I could not figure out how to get in behind those headlights. This video helped a lot.
Your welcome!
great video dude. the haynes manual was misleading, this is much simpler than its description.
Thank you for the video, but it should say in the beginning you need a 10 inch extension to take the bottom screw out and the white clip is basically straight upwards cause I looked and could not see it for ever till I put my camera with flash on. But thank you again cause my husband wanted to take the whole grill off...
thanks man it really helped out. first time changing the lights on my 2012 and I didn't break anything lol.
LOL Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Awesome man thanks for the instructional video.. really informative I gotta change the signal light socket, I have the piece it just looks like it will be a pain in the ass...
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Very good video man i have 2013 witch am about to attempt this tomorrow... thanks for the step by step instructions.
Antonio Davis good luck! Let us know how it goes! And be careful with the white tab on the headlight! Be sure the read the video description. Happy Motoring !
Everyone, do yourself a favor and watch the whole video B 4 going and starting the job!!!
Glad this video helped! Kinda odd how much work it takes to do the light!
Very Helpful, so grateful to find this video!
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Thank you for this perfectly executed video. Very clear instructions. 👌
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Thank you so much this helped me big time change out my chrome lights to black outs ..thank you
Glad this video helped! Happy Motoring!
THIS video just saved me form having a nervous breakdown. hahaha seriously. Thank you soooooo much!
Dale Hainer really glad this video helped you! We do our best to help out! And check us out on the Velocity Channel for season 4 or junkyard empire!
Hahaha yooo I did. Scratching my head. I swear until I saw this video I was like 😲 that lid I thought was to hide the keys when going to the beach 😂🤦♂️🙃😆. 🤷♂️.🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
O
Very easy to follow. Great step by step.
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Very useful for my 2015 thanks!
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Gotta love You Tube, thank you kindly.
You're welcome! Happy to help.
Awesome video man I have a 2015 ram 1500 larime that has the projector headlights I wanted to up grade the bulbs in it to match my 2013 GMC Sierra sle and 2013 impala ltz this helped a lot thank you😎
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Thanks for sharing this information I didn't have a clue
Not all are a push down to release. Mine was apparently a push up...
It should be made into law that a motorist be able to change a headlight bulb at the roadside with out so many tools and effort. I tried to replace the bulb and now the truck is at the dealership for a week because the light assembly will not come out as easily for me as it does for you in your video. But thank you for putting the video out there because it was worth a try. Could Ram not think of an easier design to change the bulb??!FYI... I think with Ram's 2019 truck you need to remove the transmission to get to the turn signal bulb.
Good job, like how you use step by step.
Glad it was helpful. Might start doing some more Atro repairs soon. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Thank you for doing this. Just bought a 17 Ram.
Anyone else have an issue removing the bottom 10 mm bolt? I got it all loosened and can’t get it out. Tried using a drill w/ an attachment and a magnet tool. Think I’m going to have to take the grill off just to get at that bolt.
Good video it didn’t help me get my headlight out at all period thanks.
Thanks for this video! Kept me from removing the grill, too!
Glad this video helped!! Happy Motoring! Blair
Good explanation of process! Thank you.
Glad it was helpful!
Right on! Mopar or No Car!💪
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Not bad at all took 20min thanks for the heads up on the tab
Glad this video was able to help you! Happy Motoring!
Damn it Dodge!! All your vehicles are soo damn hard to just do one simple thing!
B Xiong it's how they get that awesome front look! Happy Motoring!
It's very annoying
AMEN BROTHER!!
It's not a Dodge, it's a Ram
Thanks! Great instructional video!! ❤
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Awesome!!!
Thank you 🙏🏾 for sharing
You are so welcome, really glad this video helped!
good direct video. Thanks
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Excellent job!
Glad you liked it.
FYI
The white clip you’re referring to actually should go UP not down in order to release.
Thank you for sharing!
Its PUSH UP the white plastic tab! Now my headlight has no locking tab on it. Thanks....
Doug,
I am very sorry that you broke your plastic tab. Did you watch this video on your cellphone or on a computer? TH-cam does not allow for "Annotations" to appear on mobile devices if you look at the video again. In the upper right-hand corner there is Text that says to Push the Tab Up. On a computer, it says in Big Bold Lettering Push Tab Up. It is also in the videos description and In the comments of this video. Again, I am really sorry your broke your tab, I post these videos to try to help people and not have them break their stuff. In the future, if you continue to work on your vehicle yourself be sure to not "Force" plastic components into place. What portion broke on your headlight? The black arrow looking tab? Or the White Plastic Clip?
Happy Motoring
He said in the video to push
Thank you very much. Easy to follow and understand
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
Done
Thanks!
@@michaelm1436