Removing the Headlights and Grille on your RAM 1500 2500 3500 - DIY HOW TO
ฝัง
- เผยแพร่เมื่อ 23 มี.ค. 2018
- In this video we show how to remove the front grille assembly and headlights in order to change the bulbs on your 2009 2010 2011 2012 2013 2014 2015 2017 2018 RAM 1500 2500 3500.
The job is fairly straightforward but it a bit labor intensive for just having to replace a bulb inside your headlight on the truck. This is the way the truck is designed unfortunately but hopefully this helps show you the process!
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports. - ยานยนต์และพาหนะ
This is a great video and made me decide to sell the truck when my headlight burns out.
Lol its not that bad honestly it takes about an hour or so to do both
@@TheWest400It is that bad.
@@TheWest400when the L Brackets won’t release on either side. It is that bad. Retarded design
I hate it so much. And now my headlights went out again. 🤦🏻♂️
Lmao I was thinking the same thing
A video thats straight to the point, with no unnecessary loud ass intro, and pointers?!?!
Liked.
This was perfect!! So helpful and made installation of new bulbs a breeze! After watching video done within 10mins the longest part was removing the top plastic radiator cover.
Best Video i’ve seen for this job. I messed around with mine for an hour before i youtubed it, this video helped me get the job done in 20 minutes.
Dealer wanted $150 plus the light bulb! You saved almost $200! You are awesome!! Thanks!! Keep up the good work!
Hell yeah thats awesome glad I could save ya some money thats what its all about! 👍👍👍
How do you change the signal and parking lamp bulbs out on the projector 1 headlight 4th gen
Hey bro, thanks for the all the videos you do. Makes doing things to the new Ram I got a lot simpler. I knocked out a headlight bulb upgrade in about 45 mins, thanks in part to this spot on video of how to remove the headlight housings w/o breaking things. I know you got the projectors but for guys like me with the Quad reflector lights, changing the H11s to the H9s in the lows makes a world of difference w/o having to worry about the headaches with LEDs/HIDs and costs literally $18 for the bulbs. Thanks again.
This was an excellent walk through on how to do this easily and without breaking anything on my truck. I was able to replace the headlight bulbs in less than an hour following this block of instruction. Thank you.
What use to take 5 minutes max 🙄
This video was so helpful. Not only did you explain everything, you pointed it out in detail. I did a headlight change on my 19 Ram . All the things you mentioned I ran into to . This video was so awsum . Your information was off the hook. Liked , and followed. Thank you 🙏
Awesome video, straight to the point and detailed enough for me not to mess anything up!
Another bulb changed with no broken clips, tabs, or connectors! Thanks Man!
Definitely came in handy, emptied out about 1 cups worth of condensation due to the previous owner pushing the plugs all the way in, not allowing any of the condensation to flow out. Thanks! 👍🏻
Great explanation on how to remove the headlight, easy to follow and understand. I recently got a 2016 Ram R/T and am planning on doing some upgrades to it. Thanks for the FYI on removing the grill too, I definitely don’t want to break the little tabs at the bottom. Thanks again!
Thanks! I would have never figured this out on my own😅
Great video, as usual! Wanted to watch this before removing my grill. I figured this was how it was done but wouldn't have known about the bottom tabs and would have busted them off for sure!
This tutorial was dead on!!! Thank you so much! I have arthritic hands so I didn't unplug but I was still able to do everything else. Mission accomplished!
Dude! I checked out your video on how to replace my Ramtruck headlight. You were spot on for everything. Thanks to the video, I was able to do everything without breaking any tabs or fasteners. Only thing I have to add is that it took one cycle in my truck to clear the “left front blinker error”. I was kinda freakin out when I started it the first time and still had the error. But after shutting the truck off and then restarting it, the error cleared. Thanks again! You made this repair simple for me. Only took 15-20 minutes! In my case, my headlight housing was collecting condensation and would not go away and it eventually messed up my blinker. Now I’m back on the road.
Bang on !!! Thanks for confirming. It worked out for me too.
You make absolutely great videos - very clear and concise, and easy to understand and follow. Muchas gracias.
This was the most helpful, most simplistic explanation I've come across. Well done!
Thanks for sharing! Off to change the bulbs in the RAM 1500 I bought 3 weeks ago...
Literally 10 days after buying it, a headlight went out.
Mine too! But i have the lights lshown in this video and had to buy a while new housing since leds were out 😔
I had to put a new wheel bearing on day 5 after paying cash for this money pit lol today I had to get my power sliding window closed because it didn't close lol
So easy to do after removing the grill.. Thanks for the great advice.. Best video about ram headlight replacement.
Dude, you could not have made this easier! Thank you so much for the super informative and helpful video!!
Thanks man it was the locking tab in the back for me. I knew something was back there bit would've never guessed that. Preciate ya
I found your video super helpful. Like WAAYYY better than all the other videos on the same topic. Then I realized that I had already spun the fudge out of that lower bolt, that raises and lowers the headlight.
Just what I was looking for. Now I just have to find where my 10mm socket went...
Thats the one that always goes missing lol
@@BoostedMotorsports TRUE !!!!
Lol right just lost mine working on my Raptor 700
My ram ate mine tonight now I got to figure out which crevice it's living in.
Just glanced at the comments and see the 10mm comment and about lose my shit 😂 it’s not even funny how true it is
Dude... you saved me from certain frustration!
Worked extremely well.
Thanks
Dude you are a lifesaver when it comes to the 4th gen rams!!!!
Excellent tutorial, and just what I needed. I'll definitely be checking out your other videos. Thanks!
Just change my bulbs. Thank you . Was very helpful. Did everything exactly how you showed on video.👍
Great video. Finally one that does not start with the grille already off. Kudos.
Great vid brother, with all of your vids , your making maintenance on my truck easy. I told all of my buddy's with rams about your channel and they love them also. Have you installed the dee zee tailgate assist shock yet. I just put one on my truck it makes a huge difference 🤘🤘🤘
Thanks Corey appreciate your support on the channel!! Yeah I want to get one of those at some point. Just been messing around with all this lighting stuff lately LOL 🤙
good info, I appreciate the tips on how not to break the small stuff!
Thanks David! Let me know what you think of the other RAM videos on this channel too when you get a chance!
I just saw your video and now I know how to replace the headlight! It has gotten some water/ condensation in it and I had been wondering how to do it.
Thank you very much for your detailed video!
We did exactly as you showed and it went smoothly. Thank you!
Why do manufacturers have to make simple repairs so darn difficult????
Super helpful tips on how to do things safely! Thanks for the video!
Absolutely perfect, thank you for this. This is what I needed.
This is a great video. Another one I saw showed how to do this without removing the grille. I would be reluctant to do it that way just in case the lower bolt turned the adjuster when trying to remove.
Thanks. You are the first I saw that explained it in great detail. It was very helpful
Best video I’ve seen about RAM headlights I’ve seen. Hats off to you sir you have a new subscriber
Great video, short, simple and with all the necessary details.
Thank you so much. Thanks to your video I was able to do the whole thing in less than a hr (and without breaking anything) great video!!!!
Thanks for the instructions on this. Made this job a snap.
Thanks for your help, I was able to install my LED headlights on my 2018 Ram... Mine aren't the projector, but same removal/install.
Awesome!!! Glad you found it helpful! 🤘👍
BoostedMotorsports can you tell me is all the bolts that go across the top of the grill the same thread pitch?where two go in the
Metal and two go in plastic
Worked like a charm, nice quick and easy.
Excellent video, replaced my headlight assembly flawlessly. Thanks
Man, I really appreciate your videos keep them coming,
Thanks brother thanks again for your support! More videos on the way and another posted tomorrow!
Thank you for the step by step guide. It went exactly like you demonstrated.
great video! exactly what i was looking for to install my new headlights. thank you!
Thanks, helped me a lot, only I left the grill on. Feeling the white tab was an eye opener for me. I felt tons of other colours but this one was awesome 😂
Excellent. Big help. These videos are very helpful so you’ve helped many. Thanks again.
Thanks Ken I appreciate it! 💪
Thanks for the help buddy! Clear instructions and visuals…
Great in-depth video thanks
Great explanation, simplistic and to the point, thanks.
Thank you. Very helpful vid.
Working on my RAM right now 👍👍
Hell yeah glad it was helpful 👍👍
Perfect step by step directions!!!
Great video. Helped me change headlights without breaking anything!
Great Job, easy and clear to understand ! Thanks
Thanks Terry! Let me know what you think of the other videos we have on the channel for these trucks too when you get a chance! 😎
Thank you very much for such an informative video. It made changing the bulb so easily. 👍
You just earned another subscriber, great video!
Great video, easy instructions keep up the good videos
Outstanding, thanks for this video!
Thank you for this helpful video.
Spot on makes it super easy! thanks man!
Thanks for the feedback! Check out the other RAM content on this channel too when you get a chance! 😁
Best video!!! Takes you step by step. The only thing was taking off the running light... having to press the tab back instead of pinching together was the only tough part. Can you make a video for taking the grill of a charger?
Good video, clear and concise.
Thanks for the video it was so easy to follow
Dude! You saved me a crap ton of 4 letter words! Much appreciated!!
Thank you so much, very good information and Inlove the step-by-step!
Pretty solid video… thank you!!
Thanks for the video, the Rebel doesn’t have the clips behind the grill thankfully. This was so informative.
Great video. Thanks for posting!
Great video.
Done it once before, needed a refresher.
Dude, thanks!! third video I watched but the first one to actually show how the white plastic catch piece works.
Terrific tips made this a super easy, 10-minute job.
Thanks alot. Worked perfectly good advice about the clips
Thank you for the detailed video. Made life a little easier
Thank you for the video, great information
Thank you this video was really helpful 👍🏽
Very Helpful, Thank You.
Great job and huge help
Thank you for the video! What happened to the old days where you could just reach your hand in and twist? This is ridiculous now on many cars
Yep, looks like I'm going to the dealership to change a light bulb
This is a great video, narrated perfectly with easy-to-see shots That said, I noticed that in the description, the 2016 year model is not listed. Will this procedure you have demonstrated work on a 2016 2500 Cummins? Again, thanks for producing great tutorials.
Can you do a video on how to deal with condensation in the projector light housing. It seems to be a problem with the 4 th gen rams
Yep mine is filled with 2” of water. I just drilled a tiny hole in the bottom to drain it. But now I gotta change the bulbs.
I just put in the new innovited hid low beams, hikari led high beams and alla lighting premium led fogs today. I did this without removing the grill just FYI. It’s actually really easy to do it without the grill removal which is where the headaches can happen with broken tabs. Just need a long extension and you can easily remove the bottom screw. Thanks for your great vids by the way.
A review so far is that they are absolutely amazing!
Glad you are liking the upgraded lighting!!!! It really makes a huge difference! 👍
great video bro it helped me out alot changeing my head lights out on my 2018
Awesome glad the vid helped out! 🤘
very good explanation and demo
Thanks for your time. Really helpful info. 👍
No problem RIchard! Let me know what you think of the other RAM related videos on the channel too when you get a chance! 👍
Bro thank you so much for this video I was at that point with the grill and had you not shown this easy technique I would of broke something 4 sure thanks again
Good video, made the job pretty quick for me.
Great and clear explanation.
Man this hooked me up bruh thanks a lot for this video!!!
Awesome video man thank you
Thanks for your video it was very helpful 👍👍
Can you do a video of how to remove the bumper of the ram sport. I need to replace a front parking sensor
Best video ever!! I saved almost $200 for changing my light
Hey man love your videos. I'm wondering did you make a video on how to replace the rear map lights in your ram? I'm trying to change them to led but I like using your videos as a reference.
Hey Robert thanks again for your support! Mine is a factory LED but I actually have it in pieces on my table right now and am doing a custom LED panel in it and should have that video up this week for you guys! 👍
Great video. I was able to take mine out without removing my grill, however I ended up marking up my trim around the headlight and I lost my headlight adjustment you mentioned 😒 ... i didn't realize how easy it was to remove the grill and will do it your way next time. Hopefully that won't be for a very long time. Where did you get your headlights ?
Thank you for the information!! you are quite helpful.
Awesome video and thank you for sharing. Very informative, detailed with simplicity. Great job.
Thanks for the feedback! Glad you found it helpful 👍👍👍
Outstanding this really saved my azz. Thx bro
Thanks easy to follow!