Lazer Dark. Not Sure? Let's Try It! Thunder Laser BOLT. Engraving. 014 4K
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- I wanted to try out this product called Lazer Dark and Varathane Triple Thick. Let's engrave a couple of designs on Baltic Birch on our Thunder Laser BOLT and compare the finish. Cheers!
#bolt #laser #engraving
Laser NUG
Utilities /Equipment List:
Thunder Laser BOLT RF C02 Laser www.thunderlas...
Lightburn Software www.lightburns...
MAC OS - Latest Version www.apple.ca
PiBurn "BOLT" GRIP Rotary www.lensdigita...
Thunder BOLT 2.5" Focus Lens Kit www.thunderlas...
Thunder BOLT 4.0" Focus Lens Kit www.thunderlas...
ROKO Twister Tray computercreati...
Honeycomb Lay Flat Pins for BOLT www.etsy.com/l...
IMPORTANT: Lasers often project images that resemble strobe-type effects. If you suffer from health conditions such as, but not limited to, Epilepsy or Light Sensitivity, please do NOT watch these videos.
IMPORTANT: I am a brand new Laser User. These videos are provided based on my continuing learning experience. I am not an expert. These videos reflect my learning experience and are not provided as expert tutorials or expert opinion. Consult your manufacturer and/or manuals for your laser-specific requirements. These videos are intended for entertainment purposes only and are NOT provided as instructional content.
Hello, I have found that if you spray your wood with triple thick before masking it helps with the bleed. Also, if you give it a spray with triple coat after you and grave before you spray the paint. It helps with the bleed. Hope this helps you. You sure have helped me. Thank you
Thanks!
Thanks for sharing with us Gord, getting lots of great information from your channel. Keep up the great work, stay safe and have fun around there . Fred.
Morning Fred!
Very nice job buddy have a great weekend
At $22 US per can, I will just use spray Paint!
Good Morning GP 😇👍👍 Very Nice 🧐👍and I agree with you about using an other color Sir ( Yellow and Black Perhaps 🤣👍👍) Be Well GP Cheers 🍻
LOL! Those are your signature colours. :)) Have a nice weekend Dave!
Nice! Thanks for sharing Gord. Cheers, Mike.
Good morning Gord
Hmmmm I am like you I like the natural look but will admit I did like the way the black made it really stand out..
I bet if you could get other colors and depending on what the design of the engraving other colors would really look great..
ok I know you will chuckle but what if it could be done in more then one color..
Hahahahah
I know I do dream big sometimes.. 😊
Thanks for sharing.
Cheers
LOL! Morning Gus!
Good information and presentation. Thanks for sharing!
Thanks for watching. Cheers!
I have been using Marsh Stencil Ink for years and have very little or no bleed.Comes in five or six colors.
Morning Gene - thanks for the helpful info. Have a great day!
@@LaserNUG If you have problems bleeding on softwood, give it a light coat of shellac before spraying on the Marsh. Shellac is fast-drying and works well to stop bleeding.👍
Seal the birch first then mask engrave paint and reseal that way you don't get the bleed.
Thanks - will give that a try. Cheers!
Can you use a matte varnish coat on it before you apply the black to stop the bleed?
Morning Jason. I think so - a few others suggested to do that too. I will give it a try soon. Thanks!
OK, I don't get it. What is the difference between this and just using black spray paint?
This one, I think is cut differently - it appears to go on less wet than regular spray paint - no runs or drips and does not bleed into the wood like normal spray paint will. It also dries really fast - consistent coverage easily. Just my thoughts. Thanks for watching!
Bon travail original. If you are Canadian have you the name of of the magic papier ? Merci par avance.
HI - it is made by Presto Tape - it is called Perfect Tear plus. Cheers!
I would be curious to see the comparison with the laser dark and regular spray paint. We noticed if you engrave slightly deeper there is less bleed. Happy lasering.
By the way, where did the name Laser Nug originate?
Morning. Laser Engraving with Matt ( YT channel) did a good comparison which helped me decide to test it out. An old expression from when I was young - new useless guy - LOL. meant in good spirit to refer to a new guy learning new skills. Like me. Cheers and thanks!
Good morning G.P. I was just wondering. When you got your lazer machine you said it was for you and your daughter. Has your daughter done anything with it? I don’t know if you have a harbor freight in Canada but they have a lot of little shop parts and pieces like your painters points and different things like that for pretty cheap. Thanks for the video have a great day
Morning Ronald. We don't have Harbour Freight here but have Princess Auto which often has a ton of stuff. My daughter that I referred to is the one that passed away last year. We had been looking into getting a laser to work together before, and I finally decided before xmas to go ahead and get it. Thanks for tuning in!
I’m sorry G.P. I didn’t know. It must have been when I was away with my wife till she passed. I missed a lot last year I shut myself in and didn’t look at anything much I lost interest in everything for a while. I’m sorry friend and I will be praying and thinking of you as well
@@RonaldDean-eq2cb hey no worries at all Ron. I am glad you are feeling more yourself now - that is positive for sure. Be well and thanks!
Looks like spray paint? Would an old fashion rattle can work?
Thanks for sharing
Good morning - good question - I haven't tried it myself but watched a couple of YT's on it and the Laserdark provides a smooth consistent finish - no stippling or drips, and less bleeding on bare wood. Thanks!.
why is it different than spray paint?
Morning Ken. seems to go on mush drier than spray paint - no stipple or run, less bleed and dries quick and consistently. Laser Engraving with Matt ( YT channel) did a good comparison between both.
Alder, just use alder.
Seems just like spray paint..
masking tape can order from any screen printing supply company.. transfer-rite, pallet peel ..
Morning - thanks Michael. I am not well versed in it but it appears to be cut with something - it doesn't run or drip and easily covers evenly and dries quick. Thanks for watching and have a great week!
Just use spray paint. It's a gimmick to make money