IMPORTANT 2:51 Not sure why I said the original price was $50. I think I just saw that price at some random retailer online. The original price was at $35. Also as informed by me in the comments. The little trailer hitch thing can pop off so a trailer WILL fit in there. I just tried it out with my Volvo Optimus trailer.
Request for next content: please also make a review to Baiwei TW1030 Optimus Prime too (which almost similar to each other) and try to upgrade him with both DK-44 shoulder and GX-60 truck/alt back and chimney
Awesome video but small correction on the trailer connector: it actually *can* connect a trailer if you take off that circular silver "lid". It connects the APC Toys trailer they made for their Optimus Prime (have it at home, works perfectly with both figures). Might work with Masterpiece sized trailers, haven't checked
Trick I picked up doing Gunpla Stickers: Sticker glue isn't water soluble so (as long as they're not paper) you can wet the stickers and surface you want to apply them to with a little water to prevent immediate adhesion. (bonus points if you add a drop of dish detergent to the mix. ) The water should give you enough time to nudge them where you want. (I recommend a toothpick or something similar for your placing tool) Just be sure to press them carefully and firmly to push out as much water as you can, and give it a couple minutes to dry before handling again. After that you should be able to give the stickers a final press to make sure they stay in place. I've done this with Toyhax stickers on several occasions and it works great.
I personally prefer OP towering over the others so I chose to get this one instead of the one by Baiwei. The included Noah Diaz on MHZ is just the right size too to ride core class Arcee :^)
I've just ordered this figure I'm excited to have what I will consider my main optimus prime Currently my main is the smaller knock off of this version with custom autobot logos
And the good thing is the there will be a re release of the ss 102 optimus in the main line of studio series so it won’t be a buz worthy 102 any more it’s just a normal ss figure
I almost picked this up, but opted to wait for the Baiwei figure instead, which is a 1:1 KO with nicer swords and improved leg engineering. If anything I like the way Baiwei did it better, and on my copy at least, the build quality is very good.
I have tons of 3Ps and KOs...and I'm the same way...I won't apply any decals because I know I would mess up and they'd be just slightly off, and it would drive me nuts. So...I have a whole stack of stickers that keep coming with all the figures.
I love SS ROTB Prime and adore him so much that no matter how flawed he is, I am sticking with that figure. But I'm glad these superior 3P alternatives exist for whoever didn't get a chance to pick up SS ROTB Prime.
I got this figure. The only stuff that I didn’t get was the key hologram and blaster effect parts. Aside from that it’s a great figure over all despite some minor joint issues.
2:51 That is actually false. SS102 as any other voyager was 35 buck in it's original price (scalpers and poor distribution made almost impossible to get i at that price, but that's besides the point)
I’m thinking about it. I don’t really feel like reviewing the same figure for a fourth time, even though there are some key differences but if enough people ask, I probably will do it.
on mine the hands don't plug into the weapons and the front grill properly. Anybody knows how to fix it. I saw there's a new release, does that fix this issue? Please let me know
Why my comment keeps getting delete ? I was just talking about how Vector Legacy is not that bad and that on Mark's post he's much better than on the Hasbro photo
Honestly i feel like the bed part could have been modified to be a backpack for all the weapons. Perhaps with some fold out panels with peg holes or little shelves to just have them hold on the back, note: the shelving is focussed on the collector in me so not really for play it something without Perhaps the use of magnets
CORRECTION ON THE FRONT GRILL OF THE FIGURE! He said about other copies it doesnt peg all the way, its actually false i watched every reviews i seen that it pegs securely and thats just his copy but the others copies is not loose
My front grill panel tabs in as it should after I sanded down the round pegs in the arms that the panel tabs into. As they come, they're too fat, making the giant square panel not tab in properly.
Bro, have you reviewed transformers one Optus prime power flip changer because if you do, I mean you love it it is better than all of your figures cause you have to try it OK
This dude does not know anything about the scale accuracy of these figures. The Studio Series scale never had scaled well with each other in the first place so this MHZ scales better than the official studio series Optimus Prime same thing for the Noah.
@@scottandtori5082that's true, it's his channel he can do what he wants, TH-cam has something for everyone but even i got to admit sometimes these jokes makes me wanna blowgang my brains out
IMPORTANT
2:51 Not sure why I said the original price was $50. I think I just saw that price at some random retailer online. The original price was at $35.
Also as informed by me in the comments. The little trailer hitch thing can pop off so a trailer WILL fit in there. I just tried it out with my Volvo Optimus trailer.
Request for next content: please also make a review to Baiwei TW1030 Optimus Prime too (which almost similar to each other) and try to upgrade him with both DK-44 shoulder and GX-60 truck/alt back and chimney
Awesome video but small correction on the trailer connector: it actually *can* connect a trailer if you take off that circular silver "lid". It connects the APC Toys trailer they made for their Optimus Prime (have it at home, works perfectly with both figures). Might work with Masterpiece sized trailers, haven't checked
Thank you for the info. I just did that and found out it's 5mm compatible so any trailer will work. Wish I knew that before I finished the video lol
Trick I picked up doing Gunpla Stickers: Sticker glue isn't water soluble so (as long as they're not paper) you can wet the stickers and surface you want to apply them to with a little water to prevent immediate adhesion. (bonus points if you add a drop of dish detergent to the mix. )
The water should give you enough time to nudge them where you want. (I recommend a toothpick or something similar for your placing tool) Just be sure to press them carefully and firmly to push out as much water as you can, and give it a couple minutes to dry before handling again. After that you should be able to give the stickers a final press to make sure they stay in place.
I've done this with Toyhax stickers on several occasions and it works great.
The hand pegs can be fixed with a little sanding. That fixed the problem of the grill and arm cannon not plugging in properly on my copy
I was planning on doing this but mine just ended up fixing itself from repeated transformations and now it tabs in perfectly XD
The best 4th party Prime in ROTB looks amazing and better afford of price than Hasbro toys lately. Transformed into truck mode has folding its feet.
I personally prefer OP towering over the others so I chose to get this one instead of the one by Baiwei. The included Noah Diaz on MHZ is just the right size too to ride core class Arcee :^)
Same! Prime being tall af just gives him that presence that he needs
I've just ordered this figure I'm excited to have what I will consider my main optimus prime Currently my main is the smaller knock off of this version with custom autobot logos
I have that one but it's all black, so it's Nemesis prime.
This figure begs for a slight black wash. The silver sections would sing if the panel liness were darkened with a little wash.
And the good thing is the there will be a re release of the ss 102 optimus in the main line of studio series so it won’t be a buz worthy 102 any more it’s just a normal ss figure
0:45 💀💀💀
Ayo
Are you dating the anime prime?
Ayo
I mean why is he gone for a long time
6:00 the red in the chest is actually intentional for accuracy since the robot mode does have a patch of red in the middle.
I almost picked this up, but opted to wait for the Baiwei figure instead, which is a 1:1 KO with nicer swords and improved leg engineering. If anything I like the way Baiwei did it better, and on my copy at least, the build quality is very good.
I have tons of 3Ps and KOs...and I'm the same way...I won't apply any decals because I know I would mess up and they'd be just slightly off, and it would drive me nuts. So...I have a whole stack of stickers that keep coming with all the figures.
I love SS ROTB Prime and adore him so much that no matter how flawed he is, I am sticking with that figure. But I'm glad these superior 3P alternatives exist for whoever didn't get a chance to pick up SS ROTB Prime.
I got this figure. The only stuff that I didn’t get was the key hologram and blaster effect parts. Aside from that it’s a great figure over all despite some minor joint issues.
HES BACK!!!
Missed opportunity to say Optimommymus Prime instead of Optimus Mommy.
subscribed, most entertaining and indepth reviewer I have seen im already in love
The official Optimus Prime SS is retailed for 33$ not including taxes. I paid about 37 for mine from Target
Finally Leader Class
Good news, there was official confirmation that a re release of SS102 is definitely coming.
I honestly think this figure has pretty good heft and plastic quality, and I've had the original since release
For those who said it wouldn’t work, this proves you wrong.
I feel like this knock off could modify a bit so it can look extra phenomenal just like the gundam community
Very cool video mechazee reviews
Bro really loves alien attack optional girl and Optimus prime
You should review the Baiwey release of this figure. It looks very good and in terms of scale it's the same as the original ss102
i really confused. What's the difference of bmb op-01, tw1027, and mhm01? the figure looks the same
2:51 That is actually false. SS102 as any other voyager was 35 buck in it's original price (scalpers and poor distribution made almost impossible to get i at that price, but that's besides the point)
When scalping is so bad I can’t even remember the original price of a figure I bought 💀😭
That's the thing I ordered today
You should get baiwei KO off ss102. It's the best so far. Fixed truck mode. Better smokestacks. Better weapons and items. Same size ss102
SS102 Optimus is getting a re-release next year in January
I prefer Baiwei KO of this. Almost perfect.
Will you be reviewing the Baiwei ko of ss102? I heard some great stuff about it and thinking of picking it up rather than the MHZ toys one
I’m thinking about it. I don’t really feel like reviewing the same figure for a fourth time, even though there are some key differences but if enough people ask, I probably will do it.
I feel like he’s more in scale with the SS figs. It’s like the official Prime is too small in truck mode
on mine the hands don't plug into the weapons and the front grill properly. Anybody knows how to fix it. I saw there's a new release, does that fix this issue? Please let me know
Why my comment keeps getting delete ? I was just talking about how Vector Legacy is not that bad and that on Mark's post he's much better than on the Hasbro photo
I'm bought a mhm01 Optimus but it's coming in Sunday so I watched this video to learn how transform it hahahaah
Tbf one can always grab a silver sharpy and reprolabels so it's an easy fix
Honestly i feel like the bed part could have been modified to be a backpack for all the weapons. Perhaps with some fold out panels with peg holes or little shelves to just have them hold on the back, note: the shelving is focussed on the collector in me so not really for play it something without Perhaps the use of magnets
CORRECTION ON THE FRONT GRILL OF THE FIGURE!
He said about other copies it doesnt peg all the way, its actually false i watched every reviews i seen that it pegs securely and thats just his copy but the others copies is not loose
My front grill panel tabs in as it should after I sanded down the round pegs in the arms that the panel tabs into. As they come, they're too fat, making the giant square panel not tab in properly.
OMAIGAA
Now if only he wasn't oversized...
Bro, that thumbnail 💀
I hope somebody does tye entire ROTB characters
I JAUT don’t know why it takes ko to fixe the figures and not the original or hasbro can’t do it
Budget,thats it
Nice.
I just got him love him
If you think this is good, you should check out the new Baiwei ROTB Optimus
Can u please try to review the MX6601 megatron (SS109 KO)??
I picked him up to scale better with megatron
Williamson Valley
Can you review Baiwei TW1030?
Mechazee, do a robosen video about the new megatron 🤫🧏♂️
I don't like either truck mode :/
Bro, have you reviewed transformers one Optus prime power flip changer because if you do, I mean you love it it is better than all of your figures cause you have to try it OK
Could you do a review on the just released robosen G1 megatron? If's fire🔥
Does he scale with ss109 megs?
Optoms mommy is the best 😅
Could you try do a review on the bawei version?
I’ve seen a nemesis repaint of this guy online anyone know if it’s the same people or a ko of a ko
Mechazee. I want your Megatron. Gimme. Or I will steal attack optional girl.
again a Knock off better than the og
Not 100% sadly. The shoulders are still pretty ass, but he does look good
Idk how I feel about the anime version of prime....
SMASH
I'd also recommend taking a look at BAIWEI TW-1030 SS102 KO
i would go also for baiwei.. with this supreme commander
please do a review of the baiwei one of this figure
Kessler Drive
Rohan Landing
Pls I’m in adoption center because of that prime 😭
Quitzon Light
i just wish it wasn't oversized
I wonder if you bet yourself how many times you can say the word "Figure" in one video lol
I’m sorry but am I the only one that’s sees the eyes look crossed eyes
Thompson Square
Review robosen megatron!
They sent me one. Hopefully I’ll be able to make the video soon. I’m kinda obligated to make it so it will happen.
“By Mohunzzzzzzz”
-MedhaZee
I want it but it's expensive in Malaysia.😢
Where has bro been
Freelance work and travel 😭
@@MechaZeeReviews DAMN
Pls review baiwei ko ss 102 prime :))
0:02:
Why there girl optimus prime?
Lowell Spur
Valentin Vista
baiwei tw 1030 please
Goobort
Extendo
Deformation
I think baiwei version is better
This dude does not know anything about the scale accuracy of these figures. The Studio Series scale never had scaled well with each other in the first place so this MHZ scales better than the official studio series Optimus Prime same thing for the Noah.
example: ss ironhide with ss 32 op,primes taller than ironhide like ironhide the size of primes shoulders
Fix what ?? They never fix his shoulder...DNA kit fixed it!
Wtf is a 4th party
Он стоит 9000 😢
Jesus Christ loves you
STOP WITH THE HORNYNESS you know that this is IMPORTANT when i make a new word stop or ill unsubscribe not kidding
The hells your problem it’s part of his vids he can do what he wants
@@scottandtori5082that's true, it's his channel he can do what he wants, TH-cam has something for everyone but even i got to admit sometimes these jokes makes me wanna blowgang my brains out
@@scottandtori5082YES
@@Epicgamerboy-li4rv agreed my friend 😃
First😊
Ain't no way bro
Idc if you’re first
@@BreakfastBoi273 fr bro
@@BreakfastBoi273 and idc if you idc if I’m first
I was starting to think I didn't resub you after losing my old channel a few months ago
It is worth it to buy it? Because i want buy that 🫠
can the ko hold 5 mm?