Not bad. I like the custom paint scheme. I recently restored a XTR-S 450 that was dumped in our work dumpster. It's amazing how much larger the volume of the SE battery compartment is by comparison. The frame rails on mine are a lot narrower, since the batteries were originally set up one in front of the other, lengthwise. I actually kept the stock electric motor on mine... it tops out at 22.5 MPH flat out with the new 36V Li-ion pack and 800W controller. The 36V10AH pack (which fits like a glove) is a JETECH-branded OEM pack meant for a TurboAnt e-bike. Never occurred to me to try swapping a hub motor; that was rather brilliant, actually. Here I was looking for an elusive MY7618 36V 600W brushed-motor (without spending a small fortune to get one from China) and you gave me a far better solution. Yours has the integrated seat mount in the frame, also, so finding a seatpost to fit it will be significantly easier than it was for mine (which requires a specific add-on mount for a seatpost). 24:00 If you ever need to replace your grip tape in the future, consider using a rubber mallet to hammer around the edges of the deck until it impresses the shape into the backing material, then use a utility knife to ride along the leading-edge of the deck and the blade will find its way through the backing material much easier, leading to cleaner cuts. Great work, you've given me inspiration for a possible upgrade path. Thanks for sharing!
Not bad. I like the custom paint scheme.
I recently restored a XTR-S 450 that was dumped in our work dumpster. It's amazing how much larger the volume of the SE battery compartment is by comparison. The frame rails on mine are a lot narrower, since the batteries were originally set up one in front of the other, lengthwise.
I actually kept the stock electric motor on mine... it tops out at 22.5 MPH flat out with the new 36V Li-ion pack and 800W controller. The 36V10AH pack (which fits like a glove) is a JETECH-branded OEM pack meant for a TurboAnt e-bike.
Never occurred to me to try swapping a hub motor; that was rather brilliant, actually.
Here I was looking for an elusive MY7618 36V 600W brushed-motor (without spending a small fortune to get one from China) and you gave me a far better solution.
Yours has the integrated seat mount in the frame, also, so finding a seatpost to fit it will be significantly easier than it was for mine (which requires a specific add-on mount for a seatpost).
24:00 If you ever need to replace your grip tape in the future, consider using a rubber mallet to hammer around the edges of the deck until it impresses the shape into the backing material, then use a utility knife to ride along the leading-edge of the deck and the blade will find its way through the backing material much easier, leading to cleaner cuts.
Great work, you've given me inspiration for a possible upgrade path. Thanks for sharing!
@@DJSekuHusky Thank you. I'm glad you liked it.
I like all upgrade man looks amazing 💪🏻💪🏻💪🏻
Hey brother I have the same scooter I want put the same upgrade can you please send the hub motor purchase link or model you use thanks 🙏🏻
www.ebay.co.uk/itm/387134234047?chn=ps&_ul=GB&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&mkscid=101&itemid=387134234047&targetid=2361039923645&device=m&mktype=pla&googleloc=1006524&poi=&campaignid=21697381820&mkgroupid=170109506289&rlsatarget=pla-2361039923645&abcId=10027101&merchantid=6995734&gad_source=1&gclid=Cj0KCQiAi_G5BhDXARIsAN5SX7oCQmEzz6Agt2KXgMYq-0Tu2KGekfRAmaiI9h5pYC_9uBIYFqM1TvoaAk_xEALw_wcB