I agree but if they were, they’d be 3-4 times as much. Still, it would be worth it for Americans, but it wouldn’t be worth it for companies. So, there should be a law.
HF does have a reasonably priced USA made frag as well, but as an employee I have rarely sold them. Most are the cheap ones when on sale. The choice is ours.
I have been subscriber for years now. I am a certified diesel technician and heavy equipment technician. I have taken your advice on several tools. I appreciate your help and honest opinion and reviews. Thank you so much for taking your time to make these videos. So thank you sir.
One small problem with the plastic ammo cans, at least the MTM molded products ones is that they are tapered from top to bottom while the steel ones are not.
@@cwg2432 The unit must have failed…. I’m guessing that they Not only lost all of their refrigerant food, including their frozen items in the deep freeze, but they probably sweat like overheated 🥵 Hogs !!!! If everything was copacetic, I’m sure they’d have answered your inquiry 🧐 ????? 😂😂😂😂😂😂 Don’t ever purchase anything from Harbor Fake or Farm a Fleece!! You’ll thank me later !!!
You can take this as a good way or bad way. That means we’re getting opportunities throughout the year to buy. Look into different brands and pick best value too
The Bauer orbital sander is not worth getting. I purchased that and redid my back porch sanding all the paint off, I used it for a couple days and it was a killer on my hands and was VERY slow to remove layers. I baught a bosch and it was WELL worth the upgrade.
Pro tip when buying the Apache cases from HF. While there, grab a bottle of Goo Gone to remove all the silly stickers they have stuck to them that tear and never come off clean.
@@zardoz2627 Pro Tip - Never 👎 purchase an emergency item from Harbor Fake !! It’ll look pretty, until you need it !!! Only a fool buys emergency equipment from Harbor Fake !!!
I just bought the 5K Predator generator at the parking lot sale for $850. Got my 5 drawer cart last Xmas for the same price. The Quinn Master mechanics set on the 40% off sale a few weeks ago. Your channel has been key in me prepping for these deals. Synthetic lines can cause great bodily harm if they separate. Naval mooring lines are synthetic and have been known to dismember line handlers.
He's not kidding about those yellow batteries. I bought a pack, figuring they'd be good for wireless mice and whatnot. Nope. A single yellow AA lasts about two weeks.
I had a big pack of 9 volt yellow batteries that I just threw away. Put one in my CO detector and it started chirping right away. Tried another and the same thing happened. Admittedly they were a couple years old but they should have been good for several more. Even Walmart batteries have a 5 year shelf life.
Heavy offroader here. Your advice on the "go synthetic rope" is a bit off the mark. Yes synthetic is safer if it breaks, however 1)it must be replaced every 12-24 months due to UV light damage (you MIGHT go 36 months with a high end rope) 2)You can not run synthetics over rock, rough surfaces, etc. 3)Doing compound pulls with synthetic can be tricky, Especially if you are doing at 3 point pull. The pullies/slider grommets tend to be too rough/tight for that. So for novices, and people who might use a winch once a year at most. I don't recommend synthetic ropes.
Project Farm tested Predator vs Honda generators & Honda still killed em. He sent the engine oil out for testing & no shock, Honda blew it away w/ almost no engine debris vs Predator having a substantial amount. No hype. Just hard metals in oil proof
I have a Predator 3500 that just randomly died after 10-12 hours. Cleaned the carb, exhaust screen, gas was fresh, I tried everything. Just JUNK! Left me and my girlfriend w/o power at 9pm.
@@RustyZipper I hate to say it, but they did name it, “Predator” …..lol In all fairness, I’m very hesitant about purchasing an emergency power item from Farm & Fleece and/or worse yet, Harbor Fake. You never know how dependable it’ll be until you actually need it. It’s kinda like the lawnmower or snowblower scenario; the lawnmower never breaks in the winter, and I’ve never had any issues with my snowblower in the summer ! 😂 For that very reason, back in 2017, I purchased 2 very expensive gasoline generators. I haven’t used them much because we haven’t had any outages, but when we do, I hope that these Yamaha generators cut the mustard, or at least keep it cold. Like a Honda product, these were more close to quadruple the price, even after my discounts (I’m a longtime friend of the dealer). Why did I blow so much money on these units ? Because I can’t take the risk. My chest freezers contain thousands of dollars worth of lobsters, scallops, crabs, bone-in prime ribs etc. I hope that I made the right decision.
@@Joseph-wp2ry - I’ve been tempted many times to buy a nice Yamaha generator but dang they’re expensive. Our power rarely goes out but usually it only for a few hours. But it has gone out for several days and then you’re screwed. Also need to have enough fuel. Plan on 1 gal per hour. I usually have back up plans for my back up but we got caught when the trusty Predator failed. I was more angry at myself than the POS failing because I failed to plan for a failure. Ideally you could run your freezer off a little 1500w unit gas sipper 1 hour on and off. I had to power a forced air furnace. Ended up buying a loud Champion 6000w or something in desperation, an hour away.
My wife bought everything in purple. All the car tools are in green. All my work tools are in blue. All of her work tools are in purple. Makes life easier.
It’s so bad I’m buying “Sparkle” paper towels at Wal-Mart. I’ll put a piece on some spilled water and the paper towel just says “no, not absorbing that today Bud.”Building back better I exclaim
My local stores are not selling the mini tool boxes anymore even though they’re in stores until November 22, called customer service they didn’t know about this and are contacting the regional director and corporate.
@@jamescraigrn 👎 If you refrain from shopping at Harbor Fake, you won’t need a coupon, and you’ll still save 100% !!!!! Stay away from Harbor Fake !!!!!
To anyone dealing with black cases or can’t find me tools. I recommend placing some glow in the dark tape! I use it on my guns, gear, and equipment and it’s so nifty! I never leave home without a roll in my car. I have a roll in every spot I think I may need it. Been using it for almost 15 years. Highly recommend some!
@@SilentCanary I agree ☝️ !!! When I go out drinking late at night, I insist that my wife place some on her landing strip. She’s been using it for 15 years. Highly recommend some!
I was just thinking about you the other day. Hadn't seen a video of yours in awhile. You're looking better and healthier than before. God bless you brother.
This is a sorry sale , it’s no better than a monthly sale . Want to make a massive deal ? Do a 20 percent off super coupon on one item in the store , no exceptions
Coupon 25% NO EXCEPTIONS.... which is a lie! Fine print in the coupon always DOES NOT INCLUDE such and such. That's why I don't shop this CRAPPY place anymore... they LIE!!
@@Afterhoursdetailtx 😂😂😂 when you have an emergency, and it doesn’t last more than 22 hours, you’ll finally realize that anything you purchase at Harbor Fake is a SUCKERS PURCHASE !!!!! 😂😂😂😂
As far as dry wall sanders, I don't use them. I've replastered several rooms in my house, yes, straight mud and lathe, and the trick with mud like dura bond is you finish it WET. If you finish it with your trowel when it's stiffening up, (firm to the touch but not hard) spray it with water from a spray bottle and go over it with your trowel it will be glass smooth.
I miss the Pittsburgh pro.. they had some great stuff. I had a Pittsburgh pro small kit they dont make anymore that was perfect for keeping in the car/bike
Never been able to get anything a cent below price. I haven't even got then to admit a coupon is available when I ask when I forgot the coupon at home. I have heard a couple of handicapped people in the store talking about getting the manager to give them discounts. The local store does not stock the store well but they will go to the back and get an item if you ask. They are giving more items to youtube shops, but the prices have and are going up quite a bit. One shop was given the smoke machine and they just gave them the 1700 dollar t10 scanner and he likes it. I guess that is good for advertising but not for the average guy working on his car at home which is why most people go to HF. Thanks for the video.
11:06 I have used three of these mounts and they are great. One holds up a face scanner and the other two hold up two 42 inch Vizio LED TVs for a digital menu. Perfect
How to murder your husband shows....made me remember a British Comedy my wife and I loved called "Rumpole of the Bailey"; an aging english barrister with a penchant for sherry and a wife he commonly referred to as " she who must be obeyed."
Those Braun lights are awesome until they start failing. I've had 3 of them now and all 3 have failed the same way. At some point something fails, probably a solder point inside, and any tap on the light shuts it off. Get the extended warranty on it for sure.
The Pittsburgh Travel Tool Set Case 20:28 I highly recommend this set. I keep a set in every car, in all the kid's cars too. If the car ever gets broken into, it's a $30 tool set; and, not your prized tools. I take this set into junkyards with me; because they're just that handy of a set. Has a little bit of everything I might need. One time my wife called about her car's dead battery. I gave her the address of the battery shop; where it was covered under warranty. She used a jumper starter to get going and when she got there, they told her there would be $30 service charge to replace a warrantied battery. She's like, "GIRL POWER". She used this cheesy tool set to replace the battery herself. Tool set paid for itself, right there. Yes, there are way better sets; but, for a low price emergency set, this kit is hard to beat. I just bought another one this weekend, as an upcoming Christmas gift.
Helping stranded motorcyclists on the side of the road. It's happened 3 times already. Twice when stopped at scenic look out spots; and, another time when offroad. Great little set to lend out. And they were all grateful. Cheesy little sets are rather handy; out on the road.
I came to say the same thing. I had one in the trunk of my car until I gifted the set to a newly married friend. It came in clutch several times going to a relative's house, and they wanted me to fix something. It's not a comprehensive set, but it beats hitting up dollar trees in a crisis looking for pliers. It is flat and doesn't take up much room in my Camry's trunk. My only complaints were the precision screwdrivers fell apart (probably not crimped well enough to stay in the handle), and screwdriver bits and Allen wrenches always fell out when opening. Since I gave away my last set I'm looking to buy again.
I got one of the new trailers in July by accident. They had one in stock and it said online not available until November. I bought it for the same price as the old trailer, so I took that deal!!!
I don’t know how accurate the weight rating is on the engine crane, but the 2 ton version will definitely lift at least half its advertised capacity. A great tool for lifting anything heavy when a floor jack just won’t do.
Black Friday at HF is always meh. Glad there's a few gold nuggets this year. I might be the only one that likes the folding Allen key set 🙂 I think they're great for light work around the house and probably get 90% of my non-automotive stuff done just fine. For serious work I have my Craftsman set I got in the early 90s. You got it right about the herc brushless gear. My father was a professional mechanic for 50+ years and he was blown away by the herc brushless impact I bought.
I bought that Vulcan Omnipro multi process machine when it first came out around 2018ish I believe. Caught them on one of the coupons you pointed out and I believe I got it for 749 or 799. More than got my money's worth so far.
The Bauer corded impact gun is better than you think, if you don’t want to buy into a battery system or a big compressor to run a pneumatic set up, then the Bauer impact is for you, would I use it in a professional shop, probably not but for the home garage it will do everything you need it to do, absolutely love mine for the convenience.
Menards has a 5 drawer tool cart under the performax line identical to the US General from harbor freight. I saw it in store today and tag says order online. Online price is $249
This is almost the same as the current parking lot sale. I’m guessing they’ll add individual items and maybe some brand wide deals as the sale gets closer, similar to how they did it with the PLS. This looks rather weak. I was always told that their Black Friday sale was usually one of their best of the year. We’ll see if they add to it.
You were talking about how brands change over the years. Well you are so right. I started using Weller soldering guns back in 1976. They were heavy duty awesome durable guns. Well I lost my old D550, the big one 300+ watt and bought a new one exactly same model and I tell you it's a piece of junk. The trigger is so stiff it makes your finger hurt just after a few seconds. The lights wiggle around. The cord is so stiff it's hard to keep it away from what you are soldering. Piece of junk now. So sad.
I had three pressure washers, couple hundred bucks a piece, over the years and each one had problems after a year or so --Yeah, the problems were probably with me -- but we bought that Portland unit in the ad here at about the same price 4 years ago, figuring that if we had any problems that I couldn't fix it wouldn't be a big deal, and that thing has just worked. In spite of my best effort, it just works, and it's kept working. When (IF) my current one dies, I'll get another one.
I have the 1 gallon and the 26 gallon ultra quiets, that I paid $128 (sale) and $136.49 (return) for. The only thing that was wrong with the 26 gallon return is that the customer put one wheel on backwards, so it was jammed against the tank and wouldn't roll! First I added some washers to get it rolling, then realized that flipping the wheel over was all that was needed. My next yard sale will have the red 3 gallon (Central Pneumatic) HF pancake and the blue McGraw 3 gallon hotdog that I paid $40 (sale) and $19.50 (clearance) for. They both had served me well enough for tire filling, but now seem unbearably loud, after using these ultra quiets. The 26 gallon 175psi has opened the door to air tools, paint sprayers, and a plasma cutter.
Just used the Bauer corded/cordless transfer pump to flush my boiler, worked great. Can't go wrong for $40! I actually got it for ~$34 with the 15% off anything coupon.
for the on the go jack, I use a 3 ton bottle jack. There's a guy on eBay that sells an adapter for it to get a really good purchase on the axles. Since I have a Jeep, finding axle isn't an issue! It wouldn't be great for a car but I have a full breaker bar, torque wrench, and jack setup in a bag that lives in the back of the Jeep. That Bauer impact is getting added to the bag.
Black firday just doesn't have the same excitement anymore. The only noteworthy deals I can remember is a few years ago the junkyard had a half off everything for black friday.
I’ve been saying this for years about the thread lock but it just never seems to manifest before the tools get used one time and fall apart the next time I pick them up 🤣
i mean i work at harbor freight and nobody is wrong about it being fake sales. take a peak at price changes and youll realize almost everything has doubled in the past year alone, the “DEALS” are just the price you would have paid a year and a half ago.
That's called inflation and its hit everything. Prices go up over time so unless you have a time machine saying "Well back in my day it was cheaper" does not make it a "fake sale"
@@denoftools you dont say.. but there is no way there isnt more than just inflation at hand. these companies are using that same boring excuse to take advantage of our dollar AND somehow convince us it costs them more NOW to pay the chinese to make the crap. all of the corporations.
Well we better buy before Trump takes office and you will pay 40 to 60 percent more due to import taxes. China and Harbor freight are not absorbing those fees
I know from experience that a cheap 1.5 ton alum jack cannot lift a 3/4 ton pickup so maybe for a car but trucks pushing it I'd say that was a bone stock 2015 gmc sierra 4wd
Agree on air compressor thing my 17g is almost no better for filling a tire than a pancake and won't run my plasma worth a crap I'm gonna go to a 60 and 2 inline watertraps prior to outlet amd hardliners in shop
The car port is like you said a $180 kite. Had 1 make it 1.5 years. Had mine anchored down and it bent after 1 good thunderstorm. I straightened it the best I could but the next good storm we had bent it again and broke a bunch of the pipes and ripped the tarp.
The battery operated liquid transfer pump isn't returnable. Or at least not without a re-stock fee. But to be fair, I have bought a few of the various cheap pumps from HF that had that policy on them. Like the hand pump for gear oil. I never return anything, but they let me know when I buy those about the return fee. It makes sense I suppose, because what are they suppose to do with a pump that has oil or gas left in it? I bought one of the transfer pump and haven't used it, but I have one of the types that has a cutoff handle and it has worked so good, that I figured I would use the HF one as parts for the good one because the pump body looks identical going from memory.
Right side head wheel on the creeper because most people are right handed and are leaning to the right as they work on things, putting more down force on that wheel.
Great video! I have a Champion duel fuel generator. Can you do a review on some Harbor Freight portable power stations? It would be nice to power my fridge without getting out my generator.
The grinder might not be a super deal at $10 but at that price I may have to pick that up. I rarely have the need for a grinder but $10 is essentially free compared to the $120 for the battery platform alternative.
Mid sized air compressors are good for framing and roofing crews running multiple pneumatic nailers. They may over sized for a home owner and undersized for air tool users, but they have a legit place in the compressor hierarchy. They're also not bad for small paint sprayer projects. A hotdog won't keep up, but one doesn't need 28 a gallon compressor to do a couple of picture frames.
Have you tried any of the painting equipment? I’ve read a few comments and people seem to be satisfied but the most expensive model is rated for over 1000 gallons. I like that a replacement pump is offered but I don’t actually need it, yet. Seems like a good deal considering comparable products cost over double. Over spray seems to be biggest concern but a few projects can always be painted outside and then installed indoors. Curious about your opinion or if you know of any painters running with them? Specifically the Avanti max 821.
American Flags should be made in America
I agree but if they were, they’d be 3-4 times as much. Still, it would be worth it for Americans, but it wouldn’t be worth it for companies. So, there should be a law.
True, but why pay $60 when I can pay $5?
I agree that it would be better if they were made over here but I'd rather have more cheap flags flown then less expensive ones flying out there.
HF does have a reasonably priced USA made frag as well, but as an employee I have rarely sold them. Most are the cheap ones when on sale. The choice is ours.
THIS SHOULD BE FEDERAL LAW!
Thank you for your honesty on the "do not buy...hard pass" items. It's much appreciated.
I have been subscriber for years now. I am a certified diesel technician and heavy equipment technician. I have taken your advice on several tools. I appreciate your help and honest opinion and reviews.
Thank you so much for taking your time to make these videos. So thank you sir.
You are by far the most watched person on my channel list. Thanks for helping me save money where it matters
One small problem with the plastic ammo cans, at least the MTM molded products ones is that they are tapered from top to bottom while the steel ones are not.
I checked the plastic ones in store. They do not seal airtight. There just isn't enough resistance from the rubber gasket when closing the lid.
all plastic containers have to be tapered to release from the mold
The 5000 predator helped keep my family sane for hurricane Milton
Did you run your acc off of it? How many tons is it?
Hope everything and everyone is okay 👍🏻 be safe bud
@@cwg2432you’re not gonna run your central AC unless you in a very small house
@@cwg2432 The unit must have failed…. I’m guessing that they Not only lost all of their refrigerant food, including their frozen items in the deep freeze, but they probably sweat like overheated 🥵 Hogs !!!!
If everything was copacetic, I’m sure they’d have answered your inquiry 🧐 ?????
😂😂😂😂😂😂 Don’t ever purchase anything from Harbor Fake or Farm a Fleece!!
You’ll thank me later !!!
Meh, I don't feel like this is all that much better than some of the recent parking lot sales.
Most "Black Friday Deals" aren't really anymore.
It’s very, very similar to the sale that ends today.
Its not. Same prices on most, if not all the stuff that was on sale already.
You mean the guy in the parking lot who stole tools inside?😂
You can take this as a good way or bad way. That means we’re getting opportunities throughout the year to buy. Look into different brands and pick best value too
The Bauer orbital sander is not worth getting. I purchased that and redid my back porch sanding all the paint off, I used it for a couple days and it was a killer on my hands and was VERY slow to remove layers. I baught a bosch and it was WELL worth the upgrade.
The cheapest ive seen that bad land jack was 280 and i felt that was a good deal but 250 damn thats a no brainer
I wish the Icon had no skip range that Quinn has.
Never thought I'd watch an entire video about buying stuff I don't need. Great presentation....
Pro tip when buying the Apache cases from HF. While there, grab a bottle of Goo Gone to remove all the silly stickers they have stuck to them that tear and never come off clean.
@@zardoz2627 Pro Tip - Never 👎 purchase an emergency item from Harbor Fake !! It’ll look pretty, until you need it !!!
Only a fool buys emergency equipment from Harbor Fake !!!
Enjoy your insight and your comedic delivery. U da man.
Thanks for all you do for us DIYers.
A subscriber
I just bought the 5K Predator generator at the parking lot sale for $850. Got my 5 drawer cart last Xmas for the same price. The Quinn Master mechanics set on the 40% off sale a few weeks ago. Your channel has been key in me prepping for these deals.
Synthetic lines can cause great bodily harm if they separate. Naval mooring lines are synthetic and have been known to dismember line handlers.
I think I'll use this sale as an opportunity to grab another 5 drawer roll cart and assemble the forbidden 10 drawer 😂
I always appreciate how the bear gives friendly advice to us homegamers on diy level tools instead of making fun of us cuz were poor 😂
He gets it 😊
The best travel jack is the good ol bumper jack! Unfortunately cars nowadays don't have "real" bumper lol
Lowe’s has mini 1 quart buckets now, I wonder how long until HF makes their own like the mini tool box
More like 1/2 pint. I bought 2 . Couldn't help myself.
HF is to release a mini toolbox either at BF or Xmas!
@ it’s already out in stores
He's not kidding about those yellow batteries. I bought a pack, figuring they'd be good for wireless mice and whatnot. Nope. A single yellow AA lasts about two weeks.
I had a big pack of 9 volt yellow batteries that I just threw away. Put one in my CO detector and it started chirping right away. Tried another and the same thing happened. Admittedly they were a couple years old but they should have been good for several more. Even Walmart batteries have a 5 year shelf life.
They lasted about an hour on my Xbox controller
Black Friday seems so far away because it is still 100 degrees here. Sheesh!
Heavy offroader here. Your advice on the "go synthetic rope" is a bit off the mark. Yes synthetic is safer if it breaks, however
1)it must be replaced every 12-24 months due to UV light damage (you MIGHT go 36 months with a high end rope)
2)You can not run synthetics over rock, rough surfaces, etc.
3)Doing compound pulls with synthetic can be tricky, Especially if you are doing at 3 point pull. The pullies/slider grommets tend to be too rough/tight for that.
So for novices, and people who might use a winch once a year at most. I don't recommend synthetic ropes.
here's a hint, go buy it a few days before the sale and then take your receipt back and do an exchange. You have 30 day return policy
The Viking Jump Starter is trash, Project Farm tested it.
Project Farm tested Predator vs Honda generators & Honda still killed em. He sent the engine oil out for testing & no shock, Honda blew it away w/ almost no engine debris vs Predator having a substantial amount. No hype. Just hard metals in oil proof
@@butchgreene Almost everything at HarborFake is GARBAGE !!!!!
I have a Predator 3500 that just randomly died after 10-12 hours. Cleaned the carb, exhaust screen, gas was fresh, I tried everything. Just JUNK! Left me and my girlfriend w/o power at 9pm.
@@RustyZipper I hate to say it, but they did name it, “Predator” …..lol
In all fairness, I’m very hesitant about purchasing an emergency power item from Farm & Fleece and/or worse yet, Harbor Fake.
You never know how dependable it’ll be until you actually need it. It’s kinda like the lawnmower or snowblower scenario; the lawnmower never breaks in the winter, and I’ve never had any issues with my snowblower in the summer ! 😂
For that very reason, back in 2017, I purchased 2 very expensive gasoline generators. I haven’t used them much because we haven’t had any outages, but when we do, I hope that these Yamaha generators cut the mustard, or at least keep it cold. Like a Honda product, these were more close to quadruple the price, even after my discounts (I’m a longtime friend of the dealer).
Why did I blow so much money on these units ? Because I can’t take the risk. My chest freezers contain thousands of dollars worth of lobsters, scallops, crabs, bone-in prime ribs etc. I hope that I made the right decision.
@@Joseph-wp2ry - I’ve been tempted many times to buy a nice Yamaha generator but dang they’re expensive. Our power rarely goes out but usually it only for a few hours. But it has gone out for several days and then you’re screwed. Also need to have enough fuel. Plan on 1 gal per hour. I usually have back up plans for my back up but we got caught when the trusty Predator failed. I was more angry at myself than the POS failing because I failed to plan for a failure. Ideally you could run your freezer off a little 1500w unit gas sipper 1 hour on and off. I had to power a forced air furnace. Ended up buying a loud Champion 6000w or something in desperation, an hour away.
Buy the folding Allen keys, they make great gifts for people you don’t like. Office secret Santa? In-laws? Neighbors? Who am I missing?
I have 3 or 4 sets of the folding Alen keys, and have had no problems with them. The one on the ring, fall out of the spring holder.
Loctite !
I hope they make a PINK, yes Pink, Service cart. I'm tired of my wife taking mine and filling it with crap. She needs her own.
My wife bought everything in purple. All the car tools are in green. All my work tools are in blue. All of her work tools are in purple. Makes life easier.
I have one harbor freight in my city and everything is always sold out when it’s on sale 😪
Project farm did a test recently of inferred thermometers and that one tested near the top.. especially for the price
The economy has gotten so bad I can't even shop at Harbor Freight now. I'm glad I have everything from the good days.
It’s so bad I’m buying “Sparkle” paper towels at Wal-Mart. I’ll put a piece on some spilled water and the paper towel just says “no, not absorbing that today Bud.”Building back better I exclaim
My local stores are not selling the mini tool boxes anymore even though they’re in stores until November 22, called customer service they didn’t know about this and are contacting the regional director and corporate.
Excited about the icon sockets. They literally never go on significant sale.
I'll be grabbing a bunch too !
I haven’t been using my recently purchased icon ratchets…actually been waiting for the icon sockets sale 💵💵
Thanks, I don't have to go to Harbor Freight this weekend. I didn't see anything I wanted.
This was a good review.
I just want another 15-20% off coupon for any item.
I want a 30% off!
If you don't shop HF for a while they will email you a 25% off one item coupon.
@@notavailable9919 ain't happening lol!
This weekend 15 percent
@@jamescraigrn 👎 If you refrain from shopping at Harbor Fake, you won’t need a coupon, and you’ll still save 100% !!!!!
Stay away from Harbor Fake !!!!!
Harbor freight generators aren't a bargain anymore. So many other options out there with better prices and options
Like what?
To anyone dealing with black cases or can’t find me tools. I recommend placing some glow in the dark tape! I use it on my guns, gear, and equipment and it’s so nifty! I never leave home without a roll in my car. I have a roll in every spot I think I may need it. Been using it for almost 15 years. Highly recommend some!
@@SilentCanary I agree ☝️ !!! When I go out drinking late at night, I insist that my wife place some on her landing strip.
She’s been using it for 15 years. Highly recommend some!
Harbor freight is my go to tool store
I was just thinking about you the other day. Hadn't seen a video of yours in awhile. You're looking better and healthier than before. God bless you brother.
This is a sorry sale , it’s no better than a monthly sale . Want to make a massive deal ? Do a 20 percent off super coupon on one item in the store , no exceptions
Coupon 25% NO EXCEPTIONS.... which is a lie! Fine print in the coupon always DOES NOT INCLUDE such and such. That's why I don't shop this CRAPPY place anymore... they LIE!!
They did at Labor Day picked up a 13k watt generator for right at a grand out the door instead of 1200+tax
@@Afterhoursdetailtx 😂😂😂 when you have an emergency, and it doesn’t last more than 22 hours, you’ll finally realize that anything you purchase at Harbor Fake is a SUCKERS PURCHASE !!!!! 😂😂😂😂
@@JDDees NOW YOU’RE LEARNING !!
👏 👏👏👏👏👏👏👏👏👏👏
Stay away from Harbor Fake !!!! You’ll thank me later !!!
I got one of those mini toolbox’s from menards for $8 not to long ago
As far as dry wall sanders, I don't use them. I've replastered several rooms in my house, yes, straight mud and lathe, and the trick with mud like dura bond is you finish it WET. If you finish it with your trowel when it's stiffening up, (firm to the touch but not hard) spray it with water from a spray bottle and go over it with your trowel it will be glass smooth.
I miss the Pittsburgh pro.. they had some great stuff. I had a Pittsburgh pro small kit they dont make anymore that was perfect for keeping in the car/bike
Never been able to get anything a cent below price. I haven't even got then to admit a coupon is available when I ask when I forgot the coupon at home. I have heard a couple of handicapped people in the store talking about getting the manager to give them discounts. The local store does not stock the store well but they will go to the back and get an item if you ask. They are giving more items to youtube shops, but the prices have and are going up quite a bit. One shop was given the smoke machine and they just gave them the 1700 dollar t10 scanner and he likes it. I guess that is good for advertising but not for the average guy working on his car at home which is why most people go to HF. Thanks for the video.
@@amtpdb1 👎 😂 Only a FOOL shops at Harbor Fake !!!!
11:06 I have used three of these mounts and they are great. One holds up a face scanner and the other two hold up two 42 inch Vizio LED TVs for a digital menu. Perfect
How to murder your husband shows....made me remember a British Comedy my wife and I loved called "Rumpole of the Bailey"; an aging english barrister with a penchant for sherry and a wife he commonly referred to as " she who must be obeyed."
Those Braun lights are awesome until they start failing. I've had 3 of them now and all 3 have failed the same way. At some point something fails, probably a solder point inside, and any tap on the light shuts it off. Get the extended warranty on it for sure.
The Pittsburgh Travel Tool Set Case 20:28 I highly recommend this set. I keep a set in every car, in all the kid's cars too. If the car ever gets broken into, it's a $30 tool set; and, not your prized tools. I take this set into junkyards with me; because they're just that handy of a set. Has a little bit of everything I might need. One time my wife called about her car's dead battery. I gave her the address of the battery shop; where it was covered under warranty. She used a jumper starter to get going and when she got there, they told her there would be $30 service charge to replace a warrantied battery. She's like, "GIRL POWER". She used this cheesy tool set to replace the battery herself. Tool set paid for itself, right there. Yes, there are way better sets; but, for a low price emergency set, this kit is hard to beat. I just bought another one this weekend, as an upcoming Christmas gift.
Helping stranded motorcyclists on the side of the road. It's happened 3 times already. Twice when stopped at scenic look out spots; and, another time when offroad. Great little set to lend out. And they were all grateful. Cheesy little sets are rather handy; out on the road.
I came to say the same thing. I had one in the trunk of my car until I gifted the set to a newly married friend. It came in clutch several times going to a relative's house, and they wanted me to fix something. It's not a comprehensive set, but it beats hitting up dollar trees in a crisis looking for pliers. It is flat and doesn't take up much room in my Camry's trunk. My only complaints were the precision screwdrivers fell apart (probably not crimped well enough to stay in the handle), and screwdriver bits and Allen wrenches always fell out when opening.
Since I gave away my last set I'm looking to buy again.
@@saysbadman lol 😂 - STAY AWAY FROM HARBOR FAKE !!!!!
Guess I'm the only one who appreciates the Justin Wilson reference....
GAR-ON-TEE
Not everyone knows about Justin Wilson. And even less folks know who Frank Davis is. They are both icons in my book. 👍
I always loved Justin's gare-on-TEE in that sweet Cajun accent.
I got one of the new trailers in July by accident. They had one in stock and it said online not available until November. I bought it for the same price as the old trailer, so I took that deal!!!
If that creeper is blow molded; couldn't HF call up the factory and say; hey make it double thick?
Isn't the Lisle one really thick?
i have one of the older orange ones. mine flexed. i saw a youtube injecting foam insulation. worked great!
Shopping at hf is like being on the game show of the price is right. U have to memorize all the prices to know if u can or will see a lower price.
I don’t know how accurate the weight rating is on the engine crane, but the 2 ton version will definitely lift at least half its advertised capacity. A great tool for lifting anything heavy when a floor jack just won’t do.
Black Friday at HF is always meh. Glad there's a few gold nuggets this year.
I might be the only one that likes the folding Allen key set 🙂 I think they're great for light work around the house and probably get 90% of my non-automotive stuff done just fine. For serious work I have my Craftsman set I got in the early 90s.
You got it right about the herc brushless gear. My father was a professional mechanic for 50+ years and he was blown away by the herc brushless impact I bought.
I purchased a pair and they are pretty good, long battery life, worth the money. I also fall asleep with 1 AirPod.
That 20oz hvlp spray gun can that be used for painting residences or does it really need to stick to automobiles?
I bought that Vulcan Omnipro multi process machine when it first came out around 2018ish I believe. Caught them on one of the coupons you pointed out and I believe I got it for 749 or 799. More than got my money's worth so far.
Excited to finally see icon sockets on sale, will be loading up big time
Can't beat the BF prices at 40% off !
@@SmithFarmTilton40 off for everyone or inside track? It’s 35 off now for inside track,25 non-members
The Bauer corded impact gun is better than you think, if you don’t want to buy into a battery system or a big compressor to run a pneumatic set up, then the Bauer impact is for you, would I use it in a professional shop, probably not but for the home garage it will do everything you need it to do, absolutely love mine for the convenience.
Menards has a 5 drawer tool cart under the performax line identical to the US General from harbor freight. I saw it in store today and tag says order online. Online price is $249
This is almost the same as the current parking lot sale. I’m guessing they’ll add individual items and maybe some brand wide deals as the sale gets closer, similar to how they did it with the PLS. This looks rather weak. I was always told that their Black Friday sale was usually one of their best of the year. We’ll see if they add to it.
@@donnie017 It’s Harbor Fake !!!
Save your money dude …..
You were talking about how brands change over the years. Well you are so right.
I started using Weller soldering guns back in 1976. They were heavy duty awesome durable guns.
Well I lost my old D550, the big one 300+ watt and bought a new one exactly same model and I tell you it's a piece of junk. The trigger is so stiff it makes your finger hurt just after a few seconds. The lights wiggle around. The cord is so stiff it's hard to keep it away from what you are soldering. Piece of junk now. So sad.
So true
Yeah, Weller got bought by Apex.
I was going to buy a 12k winch today. I'm glad you released this video. I'll wait a month and save a few more dollars.
Did I miss a 'on sale' log splitter in the Black Friday ad And thanks for the great reviews!
I had three pressure washers, couple hundred bucks a piece, over the years and each one had problems after a year or so --Yeah, the problems were probably with me -- but we bought that Portland unit in the ad here at about the same price 4 years ago, figuring that if we had any problems that I couldn't fix it wouldn't be a big deal, and that thing has just worked.
In spite of my best effort, it just works, and it's kept working. When (IF) my current one dies, I'll get another one.
just picked up the 26 gallon ultra quiet fortress a few days ago with the coupon, it's beautifully quiet
I have the 1 gallon and the 26 gallon ultra quiets, that I paid $128 (sale) and $136.49 (return) for. The only thing that was wrong with the 26 gallon return is that the customer put one wheel on backwards, so it was jammed against the tank and wouldn't roll! First I added some washers to get it rolling, then realized that flipping the wheel over was all that was needed.
My next yard sale will have the red 3 gallon (Central Pneumatic) HF pancake and the blue McGraw 3 gallon hotdog that I paid $40 (sale) and $19.50 (clearance) for. They both had served me well enough for tire filling, but now seem unbearably loud, after using these ultra quiets. The 26 gallon 175psi has opened the door to air tools, paint sprayers, and a plasma cutter.
I still miss the bear...it was much cuter..😂
Just used the Bauer corded/cordless transfer pump to flush my boiler, worked great. Can't go wrong for $40! I actually got it for ~$34 with the 15% off anything coupon.
They need to send out flyers again !!
for the on the go jack, I use a 3 ton bottle jack. There's a guy on eBay that sells an adapter for it to get a really good purchase on the axles. Since I have a Jeep, finding axle isn't an issue! It wouldn't be great for a car but I have a full breaker bar, torque wrench, and jack setup in a bag that lives in the back of the Jeep. That Bauer impact is getting added to the bag.
Always love tunning in on these vids man! Thanks much!
Been wanting an Led Work Light tripod from Braun it looks like this is it
Black firday just doesn't have the same excitement anymore. The only noteworthy deals I can remember is a few years ago the junkyard had a half off everything for black friday.
I live out in the desert and really wonder how well that badlands jack works in sand. Can't swing one to find out, but one of these days.
Save up over time. I'm in the same situation. Will get one eventually.......
They guys who designed are sand rats. It works in dirt and what not but it's made for So Cal style desert off road.
I noticed Matt's off road towing has been using them, plenty of sand.
Folding allen keys won't fall apart if you use a thread locker on them. 😊
I’ve been saying this for years about the thread lock but it just never seems to manifest before the tools get used one time and fall apart the next time I pick them up 🤣
Do you think the Milwaukee 2535-20 3" cordless sander will go on sale anytime this year at all?
Favorite line: That's the roundest wheel I've seen at $5 😂
i mean i work at harbor freight and nobody is wrong about it being fake sales. take a peak at price changes and youll realize almost everything has doubled in the past year alone, the “DEALS” are just the price you would have paid a year and a half ago.
That's called inflation and its hit everything. Prices go up over time so unless you have a time machine saying "Well back in my day it was cheaper" does not make it a "fake sale"
@@denoftools you dont say.. but there is no way there isnt more than just inflation at hand. these companies are using that same boring excuse to take advantage of our dollar AND somehow convince us it costs them more NOW to pay the chinese to make the crap. all of the corporations.
Well we better buy before Trump takes office and you will pay 40 to 60 percent more due to import taxes. China and Harbor freight are not absorbing those fees
@@denoftools deleted my comment replying to yours, nicee
I know from experience that a cheap 1.5 ton alum jack cannot lift a 3/4 ton pickup so maybe for a car but trucks pushing it I'd say that was a bone stock 2015 gmc sierra 4wd
The Daytona wheel dollies are a great deal. Used them on everything from a bare shell to a Chrysler 300c.
Suggestion for marking cases, get contrasting florescent paints, and spray stripes of different colors at opposing corners.
Is Bauer going to replace the 4 gallon backpack sprayer that just had a safety recall?
29:20 PLEASE DONT USE THEM FOR CATS… THE LASER IS STRONG AND WILL BURN THEIR EYE MAKE SURE TO GET ONE THAT HAS A SUPER SMALL LASER
The Air Compressor Starter kit is good if you're just short QD Industrial fittings really quick.
I’ve got that tiny Bauer 20v blower, it’s actually a ton better than I had hoped it would be. I highly recommend.
We ordered the plumbing crazy box on the August parking lot sale. It didn't arrive until last week of September. Paint is mint though!!!
Agree on air compressor thing my 17g is almost no better for filling a tire than a pancake and won't run my plasma worth a crap I'm gonna go to a 60 and 2 inline watertraps prior to outlet amd hardliners in shop
Im wondering if i cant reasonably put air tires on the creeper. I was one that busted that wheel at 195lbs almost right away
The car port is like you said a $180 kite. Had 1 make it 1.5 years. Had mine anchored down and it bent after 1 good thunderstorm. I straightened it the best I could but the next good storm we had bent it again and broke a bunch of the pipes and ripped the tarp.
The battery operated liquid transfer pump isn't returnable. Or at least not without a re-stock fee. But to be fair, I have bought a few of the various cheap pumps from HF that had that policy on them. Like the hand pump for gear oil. I never return anything, but they let me know when I buy those about the return fee. It makes sense I suppose, because what are they suppose to do with a pump that has oil or gas left in it? I bought one of the transfer pump and haven't used it, but I have one of the types that has a cutoff handle and it has worked so good, that I figured I would use the HF one as parts for the good one because the pump body looks identical going from memory.
Right side head wheel on the creeper because most people are right handed and are leaning to the right as they work on things, putting more down force on that wheel.
Want to check out that wood handle titanium hammer. Looks like a copy of my wood handle stilleto. Wonder if they will sell replacement handles
We tool heads with not so deep pockets (even less $ these last 4 sorry years) really appreciate your videos ❤
The welding table at $149 was the original price when it first came out.
Pre inflation prices !
Great video!
I have a Champion duel fuel generator.
Can you do a review on some Harbor Freight portable power stations?
It would be nice to power my fridge without getting out my generator.
@@davidphillips2541 STAY AWAY FROM HARBOR FAKE !!!!!
You’ll thank me later !!!
I need the road shock edge lights to go on sale.😂
The grinder might not be a super deal at $10 but at that price I may have to pick that up. I rarely have the need for a grinder but $10 is essentially free compared to the $120 for the battery platform alternative.
I see quite a few Jupiter inverters on the “return/sale is final” table at my local Harbor Freight.
I want that generator but there sold out everywhere around me and it won’t let me order it online
Mid sized air compressors are good for framing and roofing crews running multiple pneumatic nailers. They may over sized for a home owner and undersized for air tool users, but they have a legit place in the compressor hierarchy.
They're also not bad for small paint sprayer projects. A hotdog won't keep up, but one doesn't need 28 a gallon compressor to do a couple of picture frames.
Also super niche, but they’re the perfect size for forced air jet burners. Smaller compressors can’t keep up the cfm. Larger compressors are overkill.
anyone else notice black friday sales are just normal sales that happen throughout the year?
Have you tried any of the painting equipment? I’ve read a few comments and people seem to be satisfied but the most expensive model is rated for over 1000 gallons. I like that a replacement pump is offered but I don’t actually need it, yet. Seems like a good deal considering comparable products cost over double. Over spray seems to be biggest concern but a few projects can always be painted outside and then installed indoors. Curious about your opinion or if you know of any painters running with them? Specifically the Avanti max 821.
I want that bad lands jack so bad. This might be the deal that I get it on