I've used the voltage detector and it works fine. The nut driver set is garbage, the magnets always come out. The warrior bit set is trash as well. I picked up the small tool chest in cobalt blue. It's pretty sweet.
@@kaosactual1mine is actually more reliable than my Klein. Something wrong with the battery contacts on the Klein. Sometimes it works, sometimes it doesn't
You’re right about skipping the HF non-contact voltage tester. I learned the hard way. Fluke is best, but never bet your safety on this type of tester.
That voltage tester saved my bacon when changing my kitchen switches. There are two switches in the same box. One for the kitchen and one for a plug in the dining room. I didn't know they are on two different circuits till i used this tester. Lucky it was the first time in this box. I don't mess with my wires without it!
i got that 1 gal quiet Fortress air compressor. Wish I had got the 2 gal instead. 1gal isn’t very much air. I can barely blow off my table saw with it. whenever I use it, i’m waiting for the pump to run more and I am using the air.
Great suggestions. Thank you! I'll be picking up a few of these tomorrow. Keep in mind you can get the full set of three silicone parts trays from Menard's for under $10 right now. They've been on clearance for a while but they were still available last week.
1:05 just so everyones knows, Menards sells the exact same large, medium, and small trays all together for just $10 under the Masterforce name in green so if you have a Menards near you or the shipping cost makes sense just buy it from there. You get all 3 of them for less than the price of 1 at harbor freight.
I don’t personally have experience with the Menards or other cheaper ones, but I’ve seen people say the silicone is of much poorer quality, and doesn’t hold up as well as the HF ones. I’ve had the HF ones for awhile and they’re still as good as when I bought them, easily worth the money.
I tried two of the garden sprayers and neither would hold pressure. The gasket leaks. I finally bought a better one at Lowes for twice the money which works.
coming from the experience using one a lot, if your going electric, the Dewalt 20v is great. I also have a Milwaukee 18v and have used other ones. The Dewalt just throws more air and lasts longer. I think Walmart has them for around 135 right now. Good deal.
I've used the voltage detector and it works fine. The nut driver set is garbage, the magnets always come out. The warrior bit set is trash as well. I picked up the small tool chest in cobalt blue. It's pretty sweet.
I got the little "hot stick" or voltage detector and it is just as good as my expensive one.
I have the voltage detector and have had no problems with it. Works every time.
@@kaosactual1mine is actually more reliable than my Klein. Something wrong with the battery contacts on the Klein. Sometimes it works, sometimes it doesn't
@sociopathmercenary that's not good.
I kinda laughed out load at the 10mm socket set. Genius product!
I went to my local HF and the clerk said they all went missing from their stock 😂
You’re right about skipping the HF non-contact voltage tester. I learned the hard way. Fluke is best, but never bet your safety on this type of tester.
Wow that's some good deals thank you for the video
That voltage tester saved my bacon when changing my kitchen switches. There are two switches in the same box. One for the kitchen and one for a plug in the dining room. I didn't know they are on two different circuits till i used this tester. Lucky it was the first time in this box. I don't mess with my wires without it!
I have the Digital Torque Adapter. It's easy to verify that it is spot on, so I use it to test my Click-Type torque wrenches.
i got that 1 gal quiet Fortress air compressor. Wish I had got the 2 gal instead. 1gal isn’t very much air. I can barely blow off my table saw with it. whenever I use it, i’m waiting for the pump to run more and I am using the air.
The fortress ultra quiet compressor is fantastic also if you want to use it for models and airbrushing. I use this everyday. Its great and quiet.
i install led signs in cal that voltage tester has been amazing
Thank you so much for this video متشکرم از شما آقای محترم امیدوارم همیشه سلامت شاد باشید
Found a similar Detail brush kit at the dollar store for $1.25
The Voltage tester works perfectly. I’d recommend it.
I’m just waiting for the jack stands sale I missed out on a few weeks ago lol 😢
Great suggestions. Thank you! I'll be picking up a few of these tomorrow.
Keep in mind you can get the full set of three silicone parts trays from Menard's for under $10 right now. They've been on clearance for a while but they were still available last week.
1:05 just so everyones knows, Menards sells the exact same large, medium, and small trays all together for just $10 under the Masterforce name in green so if you have a Menards near you or the shipping cost makes sense just buy it from there. You get all 3 of them for less than the price of 1 at harbor freight.
I don’t personally have experience with the Menards or other cheaper ones, but I’ve seen people say the silicone is of much poorer quality, and doesn’t hold up as well as the HF ones. I’ve had the HF ones for awhile and they’re still as good as when I bought them, easily worth the money.
I tried the ear muff hearing protection. Agree, they are too tight and uncomfortable.
I'm waiting for the 30% off 10 bucks or less weekend.
🤞🏻 hopefully soon
I tried two of the garden sprayers and neither would hold pressure. The gasket leaks. I finally bought a better one at Lowes for twice the money which works.
FYI Menards sells all 3 of those exact silicone parts trays as a set for $9.99 total, they are identical but only come in dark green 🤣
wish I had a menards close by
Now I find out after I already have the small and medium LOL
No Menards in West Coast
@@superboy8916 Menards it's based in Wisconsin, it's only in Midwest.
@ They would do real good here in West Coast.
The battery terminal brush is a true bargain. Combined with a cheap brass brush, it makes battery maintenance a snap.
Those flexible parts trays are cheaper at Menards. They’re just green.
I dont need that 10m socket set! That socket will fall out of my engine bay one of these days!
😂
Hey by any chance are you in Chesapeake, Va?? I work in the area and thought that was super cool. God bless brother! Thanks for your content!
Yes I am! 757 🙌
That jigsaw blade set for $10 should fly right off the shelf
I got one of those silicon tool trays, I really like it.
The voltage tester is actually good , I use it alot .
The mini toolbox is pretty small 6x6x11 inch.
it’s for those guys to put their nail and makeup products in to.
Thanks.
You're welcome
yeah the voltage detector is just fine... i think judging products you have never used is a really bad idea
Bit set trash. Volt tester works. Very sensitive
The only thing I ever buy from harbor freight is zip ties as Lowe's wants a fortune.
Is that the price for one sawhorse or a pair?
1
That blue organizer tray is not worth it. $12 in Lowe’s for a 2 piece blue rubber tray way better deal
10mm for my Honda owners!!😂😂
I'm looking for a deal on an electric leaf blower.
coming from the experience using one a lot, if your going electric, the Dewalt 20v is great. I also have a Milwaukee 18v and have used other ones. The Dewalt just throws more air and lasts longer. I think Walmart has them for around 135 right now. Good deal.
lowes has the top end ego blower on sale now, that’s my pick
Don't forget...
1 magnetic Paper Towel holder = 2 magnetic Coat/Apron hangers
3:20 i kinda like them ngl
👍🍻
👍👍👍👍👍👍👍👍
Just realized you're a Tar Heel!
not quite, I’m in VA
HOBO FREIGHT!
i need to stay away from harbor freight
IS IT ME OR DOES THIS GUY SOUND LIKE CHRIS FIX.