Good video, thanks for the tip on how to differentiate between the ZF and the GM transmission. That ring problem also isn’t mentioned in any other video.
Thanks for making the video. I don’t have a pit where I can work under the car so I’ll have to jack up the car and do it with limited space. I’ll comment when I’m done.
Luv this guy!!! Very informative, and he's from America!!! LOL ;) Thanks brother you do a great job on helping us work on our BMW's 2012 328 ix e91 3.0 natural aspirated.....
if you want to avoid removing the sealer ring for the filter you can remove it from the new filter and reuse the original one. other than that everything was correctly done
I recently did transmission fluid and filter change on my Bmw LCi 320i which uses same GM transmission. Drained transmission fluid came out extremely black brown so I was worried may be I did mistake and may be after filling new fluid I will get slippage. magnet was ok with normal sludge or debris no metal shavings so it was sign of relief. Fluid came out only 4 Litres but filling back @ 45C it took 5.5 Litres I don't know why. I used AcDelco pan gasket Part No. 24225800 which was half the price of BMW genuine gasket(original gasket is also AcDelco made for BMW). Filter is also available in AcDelco but price was same as Genuine BMW so bought Meyle filter. To surprise shifting was really smooth and unnoticeable before fluid change I had harsh shifting between 2 to 3 and 3 to 4 that cure the problem and now I have silky smooth shifting between all gears. I preferred using ATF Kandell Dexron6 .
i got Transmisson fluid deteriorated code and it shakes at 40 mph i got a 07 328i e90 any advice ? would changin the fluid + pan nd filter help my situation? is aluminum pan the way 2 go?
Great video 👍 problem with the automatic transmission transmission Faulty drive moderately possible to continue journey Reduced acceleration Have checked by near bmw service Then a message appeared on the crash detector Code 0056c5 EGS: Shift valve B: stuck in off position Code 0056BF Clutch gears 12 3 and 4: neutral test my BMW 320 I 2008 Transmission GM Number GA6L-45R chassis Number D A B V G 99050V C81681 Thanks
I have changed the oil BMW 325i gm 6l45 box , 120 000km with all spares from agents. 2 years ago, I get jerky down changes sometimes, any ideas? What could be the cause the old oil and filter were in excellent condition.
Did you replace the gasket,I have the same transmission and I'm dealing with a leak, was gonna just replace the gasket for now. Can't afford the full kit.
Yes. I replaced it. You can buy just the gasket but you have to drain the oil remove the gearbox pan and after that you can replace the gasket. It will mean that you have to refill the old oil back
First time changing transmission fluid, nonetheless replacing a transmission filter, car drained 6.5 liters, and put in about 4.5 liters in, and 3 more liters when started up, and ran thru the gears (2 person job), and I’m worried I put too much in, any thoughts?
Hola, tengo un BMW 318i y cuando voy en marcha y disminuyo la velocidad como para pasar un obstáculo o para detenerme hace como un leve desplazamiento podría llamarse, me pregunto a qué se debería? Muchas gracias de ante mano!
I think the car had 135000 km and yes the oil look very good. I think it was already replaced but because I imported the car from USA and I didn't have any history at all I wanted to do all the maintenance
@@lolskylar I agree , I have spent the last few hours trying to get someone to tell me if I had a zf or gm transmission on my 201 bmw 328i xdrive car ... your ... show me , where to look and what it was made my day thank you !!!!!
@@landonwadley7630 i have same car look under car if pan is metal its gm if it plastic its a zf there also is a green sticker on the pan labeling it gm
Not really sure exactly....but I've paid aprox 600 € for concrete 50 € for reinforcement steel, aprox 100 € 2 people to help me and 3 weeks of work for digging the hole myself. If you browse my channel you can see the hole process. (By the way the prices are for the hole concrete slab and inspection pit together)
what year is the car that you are doing the work on? If I'm going to attempt this I want to make sure that I'm doing the job the CORRECT WAY! Pleas let me know thank you for your time.
@@WarpDriveM Thanks for your response, did you check the oil level after take the car on a tour? after that and working transmission temperature did you added more oil ?
@@WarpDriveM my car might not have been level when draining, and filling (drained approximately 6 liters), and the transmission was fairly warm, because I had to stop and buy a 5mm for the drain bolt, I ended up putting close to 8 liters in. It took 5 liters right off the bat, and with help of my brother starting it up and me putting more as it went through the gears it took about more 3, depending on how much leaked as I was trying to get the car more level for me to fill it. Did I overfill it too much? I’m thinking about redoing the process anyway, because a couple of the bolts weren’t perfect, and there was a lot of sludge in the magnet.
Pan bolts are 7 ft/lbs or 9.5 Nm. I've ordered my filter and gasket from USA and I forgot to order bolts aswell so I didn't want to wait another 2 weeks and I ended up to use the original ones
With the car off top as much as you can, till drips out. Put the plug back, start the car put it thru all the gears D, R, Manual and M1-M6 after that stop the car take plug off ant opp it once again till drips out and you are good to go 👍
@@WarpDriveM Thank you, i have 328i xdrive. Accept Jesus Christ as your savior and get saved my friend. Many will get left behind actively seek him for he is returning soon.
@@WarpDriveM THANKS WHAT HAPPENS I AM FROM MEXICO. AND I DO NOT SPEAK ENGLISH. THIS MESSAGE I TRANSLATED ON GOOGLE. THANK YOU. MY CAR IS A BMW 130I 2008 AND HAS THE SAME BOX THANKS ...
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Good video, thanks for the tip on how to differentiate between the ZF and the GM transmission. That ring problem also isn’t mentioned in any other video.
Its so much easier just to leave it in and reuse it old ring
Basically the same thing as with the zf transmission. But that filter seems to be a pain in the ass to change! Good job!
You are right. I didn't knew but you can leave the ring in there and change just the filter.
Thanks for making the video. I don’t have a pit where I can work under the car so I’ll have to jack up the car and do it with limited space. I’ll comment when I’m done.
Luv this guy!!! Very informative, and he's from America!!! LOL ;) Thanks brother you do a great job on helping us work on our BMW's
2012 328 ix e91 3.0 natural aspirated.....
Wow, I need a service pit ... great video!!
Best investment I've done for cars. I can do all the work on my car as with a lift. Thx for watching
Im excited for the power too man
In a week or so I should have the new software installed. Super excited about it.
if you want to avoid removing the sealer ring for the filter you can remove it from the new filter and reuse the original one. other than that everything was correctly done
I've noticed that too late but it was my first us transmission....Anyway thx for watching!
I recently did transmission fluid and filter change on my Bmw LCi 320i which uses same GM transmission. Drained transmission fluid came out extremely black brown so I was worried may be I did mistake and may be after filling new fluid I will get slippage. magnet was ok with normal sludge or debris no metal shavings so it was sign of relief. Fluid came out only 4 Litres but filling back @ 45C it took 5.5 Litres I don't know why. I used AcDelco pan gasket Part No. 24225800 which was half the price of BMW genuine gasket(original gasket is also AcDelco made for BMW). Filter is also available in AcDelco but price was same as Genuine BMW so bought Meyle filter. To surprise shifting was really smooth and unnoticeable before fluid change I had harsh shifting between 2 to 3 and 3 to 4 that cure the problem and now I have silky smooth shifting between all gears. I preferred using ATF Kandell Dexron6 .
Hey, can u send p/n or link for filter, please
Send me a msg on social media @warpdrivem
I changed just oil and only 3L 800ml. Done all the temp/gears car on level ground. Filled with running engine on 40c gearbox temp. With scanner
i got Transmisson fluid deteriorated code and it shakes at 40 mph i got a 07 328i e90 any advice ? would changin the fluid + pan nd filter help my situation? is aluminum pan the way 2 go?
Thanks from Russia
Nice video,thank you
Great video 👍
problem with the automatic transmission
transmission Faulty drive moderately possible to continue journey Reduced
acceleration Have checked by near bmw service
Then a message appeared on the crash detector
Code 0056c5 EGS: Shift valve B: stuck in off position
Code 0056BF Clutch gears 12 3 and 4: neutral test
my BMW 320 I 2008 Transmission GM Number GA6L-45R
chassis Number D A B V G 99050V C81681
Thanks
Hola 👋 me podrías decir cuál fue el problema, tengo el mismo problema en un bmw con esta transmisión. Gracias 🙏
I have changed the oil BMW 325i gm 6l45 box , 120 000km with all spares from agents. 2 years ago, I get jerky down changes sometimes, any ideas? What could be the cause the old oil and filter were in excellent condition.
What did you do to add 300hp?
Thank you
Did you replace the gasket,I have the same transmission and I'm dealing with a leak, was gonna just replace the gasket for now. Can't afford the full kit.
Yes. I replaced it. You can buy just the gasket but you have to drain the oil remove the gearbox pan and after that you can replace the gasket. It will mean that you have to refill the old oil back
How many quarts of oil do you need
Can Total MV LV ATF which is suitable for Dexron 6, Mercon work in a 320i E90 LCI BMW GM Gearbox
First time changing transmission fluid, nonetheless replacing a transmission filter, car drained 6.5 liters, and put in about 4.5 liters in, and 3 more liters when started up, and ran thru the gears (2 person job), and I’m worried I put too much in, any thoughts?
It would have started flowing out of the fill plug if you put too much after topping it off.
Hola, tengo un BMW 318i y cuando voy en marcha y disminuyo la velocidad como para pasar un obstáculo o para detenerme hace como un leve desplazamiento podría llamarse, me pregunto a qué se debería? Muchas gracias de ante mano!
How to get an update for this?
About how much would this cost ?
great video, what was the km on the car, the old oil looks fine to me
I think the car had 135000 km and yes the oil look very good. I think it was already replaced but because I imported the car from USA and I didn't have any history at all I wanted to do all the maintenance
The best tipp was with the plastic or metal pan for the transmission.
its totally the best tip. ZF or GM Finally we know.
@@lolskylar I agree , I have spent the last few hours trying to get someone to tell me if I had a zf or gm transmission on my 201 bmw 328i xdrive car ... your ... show me , where to look and what it was made my day thank you !!!!!
Ozarkdaredevil was xdrive a gm or zf? Plastic or metal? I have a 328xi 2009 trying to see what filter and gasket I need
@@landonwadley7630 i have same car look under car if pan is metal its gm if it plastic its a zf there also is a green sticker on the pan labeling it gm
I agree!
Hey man I have the same transmission, in my 2010. I am looking to do shift solenoids, are they same as ZF tranny.
Hey bro this is a late comment but I was wondering if they were the same?
Greetings, guys. Can someone share a link or P/N for this transmission filter
Where you add fluid?
Good work! which year is your car?
Thx. 2010 lci model
i thought the rear wheel drive 328i had plastic pans??
did u use gasket sealer for the pan gasket?
I don't think so.. and if I used it was just to keep the gasket in place. Normally you don't have to use
What year 328i was this car you're working on?
2010 LCI US model
How long did it take you to do all the work in the video? Thanks
Approximately 1 hour
No gasket needs for oil pan?
You need a gasket. Maybe I didn't showed in the video but there is a gasket for the pan
How much did it cost you to get that service pit installed? Seems very useful and probably costs less than a lift, no? Great video by the way
Not really sure exactly....but I've paid aprox 600 € for concrete 50 € for reinforcement steel, aprox 100 € 2 people to help me and 3 weeks of work for digging the hole myself. If you browse my channel you can see the hole process. (By the way the prices are for the hole concrete slab and inspection pit together)
th-cam.com/video/TNeSYlBRDOU/w-d-xo.html
Thank you! I will watch that video
what year is the car that you are doing the work on? If I'm going to attempt this I want to make sure that I'm doing the job the CORRECT WAY! Pleas let me know thank you for your time.
It is a 2010 bmw 328i LCI. All the 328i have the GM gearbox (US Modell) till the F series
How is running?
Perfectly fine. Even before was fine but I didn't had any history on the car and that's why I've done it!
What fluid did you used. Dexcron vi?
Yes Dexron VI
Warp Drive M valvoline max life should works right?
How did you check that the transmission was flat level?
Because i see the pan is dip on 1 side ?
@@colassolorzano6353 car was on the inspection pit and that's leveled. Maybe the angle on the camera leaves that impression.
Warp Drive M thank you
I just did today. I drain 4. 1/2. Qt. And i put 6 1/2 . Transmission temperature was 86 F. Its running fine.
How many Letters the transmission takes with you ?
I've used 6.5 l of Dextron VI oil.
@@WarpDriveM Thanks for your response, did you check the oil level after take the car on a tour? after that and working transmission temperature did you added more oil ?
After putting the car into all the gears I've added up a little bit more. But 6.5 L was in total. Ive bought 8 L just to be sure.
@@WarpDriveM my car might not have been level when draining, and filling (drained approximately 6 liters), and the transmission was fairly warm, because I had to stop and buy a 5mm for the drain bolt, I ended up putting close to 8 liters in. It took 5 liters right off the bat, and with help of my brother starting it up and me putting more as it went through the gears it took about more 3, depending on how much leaked as I was trying to get the car more level for me to fill it.
Did I overfill it too much? I’m thinking about redoing the process anyway, because a couple of the bolts weren’t perfect, and there was a lot of sludge in the magnet.
what is the torque spec on those bolts, by the way, did you replaced them? Thx
Pan bolts are 7 ft/lbs or 9.5 Nm. I've ordered my filter and gasket from USA and I forgot to order bolts aswell so I didn't want to wait another 2 weeks and I ended up to use the original ones
Não mostro como por óleo novo
a question did you put the oil on the car? or did you put the car off?
With the car off top as much as you can, till drips out. Put the plug back, start the car put it thru all the gears D, R, Manual and M1-M6 after that stop the car take plug off ant opp it once again till drips out and you are good to go 👍
is this car xdrive?
No is not
@@WarpDriveM Thank you, i have 328i xdrive. Accept Jesus Christ as your savior and get saved my friend. Many will get left behind actively seek him for he is returning soon.
@@dironizareyes596 stop your xstian bullshit...
Much better gear box then the shitty gf transmission.
Im feeln like you got some sketchy ass brick lift
How many liters did you put in?
Like I've said in the video I've used 6.5l oil
@@WarpDriveM THANKS WHAT HAPPENS I AM FROM MEXICO. AND I DO NOT SPEAK ENGLISH. THIS MESSAGE I TRANSLATED ON GOOGLE. THANK YOU. MY CAR IS A BMW 130I 2008 AND HAS THE SAME BOX THANKS ...
You can't put all 6.5 lts i drained exactly 5 liters. I can put only 2.5 when the car is levelled
@@mahendran2127 you have to run the car thru gears and after that you can put another 2 or 3 l. Don't drive the car just put it thru all the gears.
@@WarpDriveM I tried that. After shifting to all gears, I could only put in another 200 ml then stream comes out
This is not a GM transmission. It's a ZF transmission made for GM (and other brands).
On this model it is a GM transmission. Used only on the 328i US Modell
@@WarpDriveM made by ZF.
@@masscomnet Ever hear of a 2022 BMW Supra?
@@masscomnet it's a 6l45 lmao it is not made by zf
“yeah” lol
Bad automatic transmission!!! Very very low resource of gidrotransformator friction pad. second problem is mechatronic.
Bullshit I have a metal pan and there is only an electrical connection where the fill plug should be
Hello, my name is Pepe
Cuál es tu my name???
I thought you weren’t suppose to change the trans fluid…
that a lie BMW tells you...
Dracula Trans Service $249.99
Заливал такое масло в эту АКПП, крайне не рекомендую. Появились вибрации при медленном разгоне. Лучше FEBI
Where did you fill it ? Poor video
its very obvious from where... look again