I saved your video a few months ago in my watch later list and today I finally changed my fluid and filter. Thanks for this video it helped me a lot 👍🏼
What did you do about the Old Filter Seal??? you didn't show how you removed it!!!You didn't run the car through the gears or show putting the fill plug on while the car was running??? (Did you do any of that) you can't put the fill plug on if the car is not running!!!
You skipped the part where it's impossible to get the filter ring out. It just magically worked for you somehow because you didn't show it getting stuck in there although you pulled out the original filter without the ring.
Late to the party but you gotta gently bend the edge of it inside with a screwdriver and some light tapping. You can then get it out with needle nose pliers.
i want to replace my fluid bcs i got cod 578E “gearbox oil wear” but the mechanic told me to not do it bcs it will break the transmission,please your advice sir.
People say not to change it cuz you don’t have to but if you when you feel like the car kinda moves when you do your changes to P or D or R then probably go get it checked out and let’s see what the Mechanic size
Nothing will break that is already not broken .. with time the fluid loses it properties and need to be changed. A drain and fill for first time will do then followed by a full service later or change filter and gasket
I don't understand why they can't tell you the exact fluid to put in as they do with the engine oil change. I guess they want you to waste more fluids filling it up just to start the car and let the fluid come out to let you know its full...
lol.i liked the video though. i know why a part was cut when you replaced the ‘fill plug.’ coz it is bitch to put it back. lmao. know it is tough to bring the fill plug in after doing the 2nd fill. lmao
I saved your video a few months ago in my watch later list and today I finally changed my fluid and filter. Thanks for this video it helped me a lot 👍🏼
Best pumping solution I have seen-- very clean and efficient job!
That bottle jack was super useful!
What did you do about the Old Filter Seal??? you didn't show how you removed it!!!You didn't run the car through the gears or show putting the fill plug on while the car was running??? (Did you do any of that) you can't put the fill plug on if the car is not running!!!
How you get the old seal out from strainer
Nice Video Description, How many liters it takes until top up the transmission ?
Great video. Well done.
bro,
good job. my neck got stiff from doing that $#IT last night. mao
I used an offset wrench to get to the 17 mm if you have that
GA6L45R and GM6L45R is that are same ?
You skipped the part where it's impossible to get the filter ring out. It just magically worked for you somehow because you didn't show it getting stuck in there although you pulled out the original filter without the ring.
The new filter can be used with the ring in there. It’s just a matter of confirming if it fits tightly
Thank you!
@@marvinmarcus5957 don't do this guys.
@@mastershredder2002why not
I've never replaced that metal filter ring on any GM transmission.
Buen video Se mira bien todo lo que haces compa
🏖️🏆😂🏝️🤣🤣 I heard a minion in the middle of this video.
can you do this while the car is warm?
Good video , thanks
How many miles and did you use a flush
How do I remove the old filter gasket? It’s stuck at the opening?
Anybody know?
Late to the party but you gotta gently bend the edge of it inside with a screwdriver and some light tapping. You can then get it out with needle nose pliers.
good job
i want to replace my fluid bcs i got cod 578E “gearbox oil wear” but the mechanic told me to not do it bcs it will break the transmission,please your advice sir.
People say not to change it cuz you don’t have to but if you when you feel like the car kinda moves when you do your changes to P or D or R then probably go get it checked out and let’s see what the Mechanic size
Nothing will break that is already not broken .. with time the fluid loses it properties and need to be changed. A drain and fill for first time will do then followed by a full service later or change filter and gasket
Same for 2000 328ci e46 automatic?
Shouldn't be much different same sequence of events. That cover he removed in the beginning may be different or absent
I don't understand why they can't tell you the exact fluid to put in as they do with the engine oil change. I guess they want you to waste more fluids filling it up just to start the car and let the fluid come out to let you know its full...
7 litters
lol.i liked the video though.
i know why a part was cut when you replaced the ‘fill plug.’
coz it is bitch to put it back. lmao.
know it is tough to bring the fill plug in after doing the 2nd fill. lmao
My 2008 is not like this