you see tutorials problem is that they show you solution but not the principle. It's like creating fire in the jungle, one can do that with sticks another one can't do that with lighter. If you want to do something first you need to understand how it works after that you can make like rocket engine from an old car turbine.
@@thokozanigwathi4249 Based on the presentation, it will really works because of the chemical component of plastic that has been filtered out by using a closed air container and a higher temperature level to melt down those plastics and making an output pipe to gather those chemical components from inside b y trapping it with water. It is called plastic pyrolysis. Plastic is very known to be much flammable and those component or element is taken out from that plastic to make it like liquid instead of a solid.
@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, the dish was covered at the top and as result once I opened the the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time
@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, I went far and boil them to the extent they turned to be a fluid, the dish was covered at the top and as result once I opened the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time
This process is known as plastic pyrolysis ( breakdown of plastic molecules producing oil, gas, some traces of ash) which is done in absence of oxygen at high 🌡️temperatures
@@Albert-gv2px This is a mixture, Its petrol, diesel, and syn gas. sometimes kerosene is found. You need to process this further using distillation or any other separation method.
@@christopherbagde9540 ,Now a days in Sri lanka,garbage of plastic products become a burden.Very unfotunately our people of Sri Lanka,throw the plastic hear & there. That's why I told that" it helps to protect enviornment" And the other hand stil we do not herd out of these bottels,can made yarn fiber and tiles.-by products use for repair the patches of the road. And we haven't technics for the same.So thank you very much for your kind concideration. Finally I can mention that Sri Lanka face a fual problem too.Now a days filling stations limited to issue the fual to the vehicles.
¿Que características tiene el combustible obtenido? ¿Es gasoil, kerosene o gasolina? ¿Es apto para carburador o inyección? ¿octanaje? ¿Punto de detonación? ¿Energía por unidad de volumen? Sin saber feacientemente estos parámetros fisico-químicos no es posible determinar si es bueno para vehículos o únicamente para estufas.
Хитрый ролик! Шланг очень близко к огню, 45 минут такого жара он не должен выдержать. Жидкость очень сильно прозрачная. Нет весов загрузки реторты. Нет отчета выхода жидкости, хотя на пластике его не много бывает. И ещё газ попутный просто испаряется … вопрос: вы хотите делать бизнес или это хобби?
Con este tipo de botellas se puede hacer calderas de vapor Pero con cuidado si pued ser con más grosor de paret mejor Y con válvulas de bola para vaciado rápido
That type of plastic won’t produce that product. You need hdpe not pet. Pet will produce nothing but bad gases and sulfur residue. Without the correct filters, even with hdpe, you’ll get something but not that clean. You need to filter each stage in line to get quality diesel, kerosene and gasoline.
Lucky is right let's not just focus on the boom or the fact that it was an inflamed liquid but rather the quality. No vehicle would last a week with this kind of product.You can try yours and see
La verdad, que del plástico sale combustible, pero no como el dueño del video dice, viola todos los parámetros de seguridad, su proceso es una mentira, 100%, por todos lado es mentira, el sello que usa, el seguro que le pone, para mantener la tapa cerrada, las mangueras que usa, los depósitos, para recibir la materia de pirolisis, todo eso se quemaria si pasa por ahí el material caliente y la cantidad que saca, y ya destilada, etc.
hai ragione, molto pericoloso,una cosa che ho' osservato, è un spreco nell'alimentare il fuoco, su' queste cose io non gioco, parliamo di sicurezza, io onestamente , sé mai vorrei provare, molti lavaggi , nella bombola, e il taglio,nella stessa , ho' paura, certo che provo paura, altri commenti , dopo, ciao,
looks like clear heavy duty PVC hose with a jubilee clip. I would add that whilst i dont doubt the process of turning plastic to fuel, i do doubt the videos authenticity. The cuts are a bit magician esk. why not camera pan or speed up the speed of the whole apparatus in action? If the input data is incomplete, so likely is the outcome.
How can you be serious with that PVC hose right on the pyrolysis reactor, the poor seal, and the using of PET feedstock. This wont work like this, people.
Do you refer to the gases that escape at the end of the circuit? They can be burned off, and due to the container full of water (that acts as a "valve of no return") the risk of explosion from the container with fuel is minimal.
Still not environmental friendly, burning fuel to create another fuel is just a waste of energy. And the waste product cause another environmental issue.
اولا شلنگ که برای اینکار باید استفاده صه جنسش باید مس باشه تا نسوزه اما شلنگ آب میشود دوما پلاستیک بعد سوختن به دود تبدیل میشه نه بخار سوما یه کاسه زیر نیم کاسیت
Interesante, en el fondo estás cambiando la forma física de un combustible fósil, habría que estudiar el rendimiento calórico de ambas formas para determinar si hay ganancia o pérdida de energía Una sugerencia, no utilizar un codo en el tubo de salida del estanque, pues acerca la cañería plástica al fuego
I ´ve tried many times with a better equipment to do the same and zero result, but you are doing a great job with less equipment..congrats..
you see tutorials problem is that they show you solution but not the principle. It's like creating fire in the jungle, one can do that with sticks another one can't do that with lighter. If you want to do something first you need to understand how it works after that you can make like rocket engine from an old car turbine.
So it didn't work for u? I wana try it out so I am curious about what happen to you trying it out
@@thokozanigwathi4249 Based on the presentation, it will really works because of the chemical component of plastic that has been filtered out by using a closed air container and a higher temperature level to melt down those plastics and making an output pipe to gather those chemical components from inside b y trapping it with water. It is called plastic pyrolysis. Plastic is very known to be much flammable and those component or element is taken out from that plastic to make it like liquid instead of a solid.
@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, the dish was covered at the top and as result once I opened the the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time
@@thokozanigwathi4249 Actually I think this should be workable project, because there was some day I was just melting some plastics around in the steel dish with higher temperature fire from the coal so I can get some mould, I went far and boil them to the extent they turned to be a fluid, the dish was covered at the top and as result once I opened the dish the fire from outside went in and there was a huge explosion as if there was some extra flammable fuel poured into that dish, then I come across this project and I learn something from what happened to me the other time
It's nice of you to listen to the suggestions of the people in your previous video.
Thanks sir for the time and effort you put to demonstrate the best idea, really helpful and broadening my mind of creativity and innovation ❤
Love this. . . I must have a bigger production plant. Waste plastic is all over
This process is known as plastic pyrolysis ( breakdown of plastic molecules producing oil, gas, some traces of ash) which is done in absence of oxygen at high 🌡️temperatures
Is the fuel in the video unleaded petrol? Or biodiesel? Or something else?
@@Albert-gv2px śb
@@Albert-gv2px This is a mixture, Its petrol, diesel, and syn gas. sometimes kerosene is found. You need to process this further using distillation or any other separation method.
@@thulilerankwemoroka2923 what about wax formation
Hard work & creativity
Great Brow 🙏😎💪❤️
Nice idea.It helps to protect the enviornment from the garbage disposals and gives a solution for the fuel requirments.
@@christopherbagde9540 ,Now a days in Sri lanka,garbage of plastic products become a burden.Very unfotunately our people of Sri Lanka,throw the plastic hear & there.
That's why I told that" it helps to protect enviornment"
And the other hand stil we do not herd out of these bottels,can made yarn fiber and tiles.-by products use for repair the patches of the road.
And we haven't technics for the same.So thank you very much for your kind concideration.
Finally I can mention that Sri Lanka face a fual problem too.Now a days filling stations limited to issue the fual to the vehicles.
@@naturesproducts-srilanka6736 Ditto. ;)
Medyo lugi dahil marami ang naubos na iginatong na kahoy, kakaunti naman ang nakuhang kailangan.
อันตรายมาก ต้องมีน้ำกันแก๊สระเบิด หินเจีย ไม่มีกาดบังเกิดอุบัติเหตุได้ง่ายมาก ช่างชาวบ้านส่วนมากเป็นแบบนี้
¿Que características tiene el combustible obtenido? ¿Es gasoil, kerosene o gasolina? ¿Es apto para carburador o inyección? ¿octanaje? ¿Punto de detonación? ¿Energía por unidad de volumen? Sin saber feacientemente estos parámetros fisico-químicos no es posible determinar si es bueno para vehículos o únicamente para estufas.
Parabéns pelo vídeo simples e top.
Great project👍👍
Good job, I wish you success
I just want to see the comments... From the experts with their critics
Хитрый ролик! Шланг очень близко к огню, 45 минут такого жара он не должен выдержать. Жидкость очень сильно прозрачная. Нет весов загрузки реторты. Нет отчета выхода жидкости, хотя на пластике его не много бывает. И ещё газ попутный просто испаряется … вопрос: вы хотите делать бизнес или это хобби?
what is the name of that paste u used to seal the cylinder?
i want to give a try!
@@lukyamuzigeofrey3169 epoxy
@@lukyamuzigeofrey3169 0
what did you make the gasket from ?
Yes, but how well does thst stuff work in a gasoline powered generator or a chain saw??
Do it work on all plactic?
Very good idea...
thank you man! crack!!! thanks thanks thanks
This is the most accurate prophesy so far
Saludos profesor el segundo envase con agua dentro es para eliminar los gases tóxicos restantes O me equivoco
Good Job bro! Can you use it on a Motorcycle or a car?
Waw !!! I couldn't never expect it.
Mera idea 💡
👍🤝
Con este tipo de botellas se puede hacer calderas de vapor
Pero con cuidado si pued ser con más grosor de paret mejor
Y con válvulas de bola para vaciado rápido
Replacing plastic with wood
useful substances are produced😅
Free ideas.expanding
Please explain... What is the gas in burning plastic?
Diesel crude oil
Formula one fuel.....
That type of plastic won’t produce that product. You need hdpe not pet. Pet will produce nothing but bad gases and sulfur residue. Without the correct filters, even with hdpe, you’ll get something but not that clean. You need to filter each stage in line to get quality diesel, kerosene and gasoline.
Can you tell me then how he produced the diesel?
More than likely he had that plastic mixed with proper plastics. Yield would’ve been better if he had left it out.
@@cuttiepie2584 i think it was just dumped into the tank to boil out.
But look, it did burn on the floor at the end of the clip.
Lucky is right let's not just focus on the boom or the fact that it was an inflamed liquid but rather the quality. No vehicle would last a week with this kind of product.You can try yours and see
Wastage of energy basically producing energy....
😍😍😍
Good job
I make that in year 1979 in the camp
Here ,PET bottles are added to reactor. But oil cant be generated out of pet bottles ?
What is the white one, brother, to glue the lid so that it is tight
will be good for road warrior times hehehe
i hope people know there is no fuel shortage. other things are involved to getting it.
Please explain what u are doing
วัสดุที่ใช้อุดข้อต่อ รอยรั่วของถังแก็สคืออะไร
dengan uap plastik yang panas apakah tidak merusak toples plastik??
the jar is placed in water pan
Good work 👍💪
Why edit the last part tho🤔
What's that white thing u put on cylinder looking like gum
Hola amigo Ami me sale solo vapor y no sé convierte en líquido porque será 😢 gracias por su información
great idea
very interesting but we want to see, to know what happens to the plastic in the iron barrel.
What are they sealing it with looks like bread
Use fly ash... catalyst jaldi ho jayega
thank you for the video
Nice job
sweet screwdriver
i need urgent that system for me
I want to build a big plant like this. Please tell me how it can be done???
a bigger version of what you just watched.
Nice bro
❤super❤❤❤❤❤
Why did not put water in the first vessel? Also, why put water in another vessel? explain please 🙏
La verdad, que del plástico sale combustible, pero no como el dueño del video dice, viola todos los parámetros de seguridad, su proceso es una mentira, 100%, por todos lado es mentira, el sello que usa, el seguro que le pone, para mantener la tapa cerrada, las mangueras que usa, los depósitos, para recibir la materia de pirolisis, todo eso se quemaria si pasa por ahí el material caliente y la cantidad que saca, y ya destilada, etc.
Excelente punto, interesante como la harías tú? Gracias
hai ragione, molto pericoloso,una cosa che ho' osservato, è un spreco nell'alimentare il fuoco, su' queste cose io non gioco, parliamo di sicurezza, io onestamente , sé mai vorrei provare, molti lavaggi , nella bombola, e il taglio,nella stessa , ho' paura, certo che provo paura, altri commenti , dopo, ciao,
signori non provate,per carità, ma' di che cosa mi devo preoccupare, in quello non per me, ma' per voi , ciao,
lo vedo giovane, è lunga là storia,waleriams031, poi cosa vi è in seguito,per il momento ,non lo' comprendo, ciao,
how come this one came out lighter color than previous one?
But the container had a liquid before you started the fire?
Egy jó kérdés: miért nem használtad fel a gázt egy gázégővel a végén hogy tovább tudd melegíteni a pet palackokat?
How to refine oil
why do you add water to the other container?
filter the gas from harmful material,but it's not sure
@@andrasubori6886 its in the wrong place to filter the gas
Salam perdamaian ☮️ dari Leo gorpongko
Also a great drink
what kind of plastic pipe is that? what is the name of the screw that is used to tighten the iron pipe and plastic pipe ?
anyone please help
looks like clear heavy duty PVC hose with a jubilee clip. I would add that whilst i dont doubt the process of turning plastic to fuel, i do doubt the videos authenticity. The cuts are a bit magician esk. why not camera pan or speed up the speed of the whole apparatus in action? If the input data is incomplete, so likely is the outcome.
👍🏻👍🏻
මෙහෙ ගෑසුත් නෑ😂
😁😁😁
use rocket stove not just a fire
How can you be serious with that PVC hose right on the pyrolysis reactor, the poor seal, and the using of PET feedstock. This wont work like this, people.
yes fake video. no result with PET.
@@Kolngodacentral0715 what do you mean it don't ork??? you just seen it work with your very own eyes!!!! lol
My first run got flammable jelly. Lol
Made a little flame thrower. So I know the break down is turning into something flammable. This is a fun project.
Good phly rs 200 ki fire lagao aur rs 100 ka petrol banao 🙈
and how effective is it? and the leftovers material?
It's just an experiment. It needs to be further developed to use it longtime. Mmm
Can I put it in my diesel car as fuel ?
❤GOOD❤❤❤❤❤❤
💪😎👍 🔥
What does the inside of the reactor look like after the run is done? Full of toxic debris?
carbon
i see, you used light heat yet the cylinder has a heard body, do plastic need little heat to turn into gas
@@lukyamuzigeofrey3169in this case the absence of oxygen & a pressurized tank makes reduces the need for high temperatures.
ok, now fill something with that thing.
What about the obnoxious gasses that can be emitted from being fused of the plastic bottles that can damage the atmosphere ?
Do you refer to the gases that escape at the end of the circuit? They can be burned off, and due to the container full of water (that acts as a "valve of no return") the risk of explosion from the container with fuel is minimal.
nice
الحطب دي تحتها بايطبخ ثور هههه
Still not environmental friendly, burning fuel to create another fuel is just a waste of energy. And the waste product cause another environmental issue.
اولا شلنگ که برای اینکار باید استفاده صه جنسش باید مس باشه تا نسوزه اما شلنگ آب میشود دوما پلاستیک بعد سوختن به دود تبدیل میشه نه بخار سوما یه کاسه زیر نیم کاسیت
That’s (thermal degradations of polymer) which is mean convert the ploymers to it’s monomers✅
It’s not produce fuel from plastics ❌
You ain't gonna live for too long if you keep on doing this kinda dangerous experiments without the proper equipment...
¿Que cosa es eso blanco con lo que sella la bonbona.?
Cool. 😊👍
Explain us.
What substance do you use for sealing between this two parts ?.
Teflon tape
Clay
Maida (all-purpose powder)
I think it is a some kind of rubber which is use walls for the water proffing purposes."Niplac-one pack"
I thought is was flour(dough) 😂😂😂
Why PET bottles?
Let's put the comments as the judges for this project
Which kind of plastic
Last part of this video is edited where you giving fire to the wet object. It will not work
❤❤❤❤❤❤❤❤❤❤
can you drive a car on this
fred
@@fredportelli3415 ???????
I guess so, atleast for a mile before needing another engine.
@@bendike hahaha
🙏👍
#oilCrudeU1 #petroilU1 #oilPlasticU1
Boru deval😙😙😙😙🙂
Thnks
Oigan podrían decirme cuál es esa masa que le pone al rededor de la garrafa
Muy posiblemente masa de trigo (aunque quizás me estoy columpiando un poco), o algún tipo de masa cementicia que hace un sello hermético.
Interesante, en el fondo estás cambiando la forma física de un combustible fósil, habría que estudiar el rendimiento calórico de ambas formas para determinar si hay ganancia o pérdida de energía
Una sugerencia, no utilizar un codo en el tubo de salida del estanque, pues acerca la cañería plástica al fuego
no sucedera, se hace en ausencia del oxigeno...
@@calloscar1948 pero con semejante llamas puede quemarla y ahí si.
Mejor usar una válvula antiretorno