you search it on AliExpress or if you are from the US you can try with injuredGadgets.com. But if you are planning for the 13pro, 13promax, 14pro & 14 promax I dont recommend it cause some fellow techs where having some issues on those batteries
Thank you for the video demo. I’ve purchased a similar battery from another vendor. I’m having issues where the battery pop up randomly appears and disappears when rebooting the devices. Are you having similar issues?
I’ve heard a few techs having that issue. I have rebooted the 12 pro max several times and until now it did not happened to me. I was trying to recreate the issue based on their(fellow techs who shared their experience with these types of battery) process but was not able to recreate it. By chance u have a link on where u got the battery so I can compile which ones to avoid? Thank u
Yes. It can take up to 5 to 6 restarts for the battery message to return. During my testing with the iPhone 13 Pro/Pro Max, once you cut the BMS board and connect it to a JC reader, the reader keeps reading the BMS. This means the BMS board requires a specific amount of voltage to be maintained. When I tried a BMS on an iPhone 12 Pro Max. The JC reader was able to read it once. Which probably explains why you didn’t have any issues.
Wala po Brother for the Xr. 11 and above lang… Sa AliExpress po meron pero may alam ako na taga Pinas nagsusupply na siya ng ganitong battery. Ask ko info nya. Subscribe po kayo Salamat ng marami
Dipende po sa gusto nyo i-accomplish sa AY a108. If using a108 for face id resolution then ok siya kase straight forward yung software process nya to resolve true depth issues. Overall, I would suggest i2c or jcid dahil patuloy ang research nila sa possible solutions and firmware updates.... Pero lately I find yung i2c better lalo na sa software brushing... I personally have the i2c, jcid & ay a108. Kung san mapapadali ang process ko then yun ang ginagamit ko at that moment. Hope this help.
There is none. Batteries are serialized unless you have access to their system to re-serialized the new battery thats the only solution if u dont have the old battery
nice video guide boss..no need na sya gamitan ng program tool pang battery anu..bale salpak lang tag on flex
Yes po pero may mga pros & cons din po yung ganitong process
brother do you have a link for the battery, because I can't find any with this type of connector
you search it on AliExpress or if you are from the US you can try with injuredGadgets.com. But if you are planning for the 13pro, 13promax, 14pro & 14 promax I dont recommend it cause some fellow techs where having some issues on those batteries
Thank you for the video demo. I’ve purchased a similar battery from another vendor. I’m having issues where the battery pop up randomly appears and disappears when rebooting the devices. Are you having similar issues?
I’ve heard a few techs having that issue. I have rebooted the 12 pro max several times and until now it did not happened to me. I was trying to recreate the issue based on their(fellow techs who shared their experience with these types of battery) process but was not able to recreate it. By chance u have a link on where u got the battery so I can compile which ones to avoid? Thank u
Do you have the link of the battery you purchased?
did you purchase the battery at aliexpress?
Yes. It can take up to 5 to 6 restarts for the battery message to return. During my testing with the iPhone 13 Pro/Pro Max, once you cut the BMS board and connect it to a JC reader, the reader keeps reading the BMS. This means the BMS board requires a specific amount of voltage to be maintained. When I tried a BMS on an iPhone 12 Pro Max. The JC reader was able to read it once. Which probably explains why you didn’t have any issues.
Thank you for that feedback.
Nice Video lods. If wala pong pre-installed tag-on flex, ano po pwede gawin?
What do you mean po na pre-installed tag on flex?
nice idol. less hassle and work. any link for that item? and meron po ba for XR?
Wala po Brother for the Xr. 11 and above lang… Sa AliExpress po meron pero may alam ako na taga Pinas nagsusupply na siya ng ganitong battery. Ask ko info nya. Subscribe po kayo Salamat ng marami
@@DaKabayanTek salamat po
No problem may follow up video ako for this type of battery
Recommended mo din ba yung Ay a108 programmer?
Dipende po sa gusto nyo i-accomplish sa AY a108. If using a108 for face id resolution then ok siya kase straight forward yung software process nya to resolve true depth issues. Overall, I would suggest i2c or jcid dahil patuloy ang research nila sa possible solutions and firmware updates.... Pero lately I find yung i2c better lalo na sa software brushing... I personally have the i2c, jcid & ay a108. Kung san mapapadali ang process ko then yun ang ginagamit ko at that moment. Hope this help.
NICE
Thanks
Wow, san po makakabili for 12 pro max?
email nyo lang po applezillarepairs@gmail.com, sa Pinas po yang supplier. subscribe po kayo sa channel. thank you
Sir where is micro tearing video
Sensya na Brother naging busy lang daming back log pero nag cocompile pa ako ng shared experience from other techs... but will post in the near future
@@DaKabayanTek ok brother
How we can solve this battery message without old battery?
There is none. Batteries are serialized unless you have access to their system to re-serialized the new battery thats the only solution if u dont have the old battery
@@DaKabayanTek Thanks for your reply sir!
san makabili 13 pro max po.. already subscribed
email nyo lang po applezillarepairs@gmail.com. thanks po sa pag subscribe