This is awesome. I'm playing around with some test footage. I have a drone shot flying over the beach. When I place 3D text, using the steps outlined in this video, it's floating up in the air and I can't get it to "sit" on the sand. As a result, when I move through the clip there's a parallax effect where it looks like the text is moving on top of the sand instead of being anchored to one stop (if that makes sense). What am I doing wrong?
I’m having a similar problem with a Motion animation, trying to make the text sit on top of a terrain and it’s not holding the same spot. I’ll try to figure out how to change the parameters manually, because it doesn’t look the best right now. Did you solve your issue?
what if we want to have 24fps, 60fps, and 120fps in the same project timeline? or do we have to make 3 different project timelines for editing those clips in and combine them in a final project after we have done all the editing and tracking?
Hello from Paris George. I am discovering your channel, and I wanted to thank you for sharing your knowledge. Although my English is not at its best, I can still understand you thanks to the clarity of your explanations. If I encounter some "problems" on mTracker, please allow me to ask you some questions in the future? In any case, thank you again for your precious help. Keep up the good work, we love it!!!! Ryade from Paris.
Hello, i need some advice please. I have a 45 second IG reel that im trying to add this MTracker 3D to but it wont load. It says Analyzing frames and it gets stuck not even half way thru. I have tried rendering the entire video, checking for FCPX updates, closing down the program, deleting the effect and then adding it back and re-running it but nothing seems to work. My clip was filmed at 4k 30fps and my project is set to those setting as well. What else could i do to make this load all the way?
If only mtracker actually worked - thus far have not once had it keep an object where I put it an it moves across the footage defeating the pont of "click and drop" requiring manual masking.
MTracker crashes my FCPX whenever I try and use a logo or drop zone. Says “Lens distortion plug in missing” and then it shuts the plug in off? Is this happen to anyone else? How do you uninstall and reinstall with mInstaller?
@@paulfrederick7323 Try to uninstall entire plugin with all packs by mInstaller then install again. (Do not use a reinstall, just uninstall then install).
Hi I just want to verify if mtracker 3d is compatible with the new update of Final Cut Pro 10.6.2 and Apple Motion? I heard some third Party Plugins are having problems with the new update I'm using an Intel Macbook
Same, my computer slows up entirely too much with these plug ins. but I don’t know why since it’s the newest MacBook Pro, I really wish I could fix the slowness of the rendering and playback of these plug ins because these would be amazing for my videos
Because Apple made a brand new chip that requires fxplug4 and many plugins are fxplug3. So they have to be updated. There is a terminal command available on motionVFX.com that you can open fcp through Rosetta and most will work until MVFX is able to update the plugs. Many many devs are dealing with this, and it will take time.
Hi there , I need your help using title 2D 07 on Tracker , I am in M1 macbook pro. the handle doesn't appear sometimes, and when I scale the text, the line doesn't follow. I can't do propositional resizing on both text and line. Also when I use title 2D 04 , I can't find the tools to resize the box. when i try to rotate it, only text rotated but not the box. please help. and another request, please make a video for tracking text on wall. I don't see any blend mode setup on the text . Only opacity. And hope the callout plugin will be Available soon for M1. tq.
As always, best to contact us via email/ directly from mInstaller up, with screenshots or recordings of the issue. Our address is: support[at]motionvfx.com
mine always says no tracking data available even though I clearly select copy after it is done tracking. I have attempted this multiple times with the same results. Any ideas what I am doing wrong.
Thanks for the helpful tutorials here, i have a question though. Mtracker 3d doesn´t work in a vertical project for me. Maybe me process is wrong, do I have to start 16:9, processing and then in the end change to vertical ratio 9:16?
Hi! It should work just fine. Feel free to get in touch with our support - you can use chat on our website or contact us at support@motionvfx.com. Feel free to send the footage you're trying to track and we'll give you some tips 💡
@@SeedCreative id love a tutorial on how you fly through the text in FCPX....... I get about half way through and once the track point is out of frame the text just stops.
@@motionvfx hi thanks for replaying … I’m still new about this but I’m so exited to learn , can you please tell where I can send the footage ? Thank you !
I added a Titles text and a star Pointer to my video. Unfortunately the Titles is in front of the star no matter what I do. Is there any way to send the Titles to the back?
@@eddycaballero5438 the only dumb question is the one you don’t ask. Never apologize for wanting to be better!! Hope it helps, and keep asking questions!
This is awesome. I'm playing around with some test footage. I have a drone shot flying over the beach. When I place 3D text, using the steps outlined in this video, it's floating up in the air and I can't get it to "sit" on the sand. As a result, when I move through the clip there's a parallax effect where it looks like the text is moving on top of the sand instead of being anchored to one stop (if that makes sense). What am I doing wrong?
I’m having a similar problem with a Motion animation, trying to make the text sit on top of a terrain and it’s not holding the same spot. I’ll try to figure out how to change the parameters manually, because it doesn’t look the best right now. Did you solve your issue?
I will be following along with you on this one, one of my best investments to date...Thanks motionvfx
Thank you for supporting what we do! ❤️
what if we want to have 24fps, 60fps, and 120fps in the same project timeline? or do we have to make 3 different project timelines for editing those clips in and combine them in a final project after we have done all the editing and tracking?
Hello from Paris George.
I am discovering your channel, and I wanted to thank you for sharing your knowledge.
Although my English is not at its best, I can still understand you thanks to the clarity of your explanations.
If I encounter some "problems" on mTracker, please allow me to ask you some questions in the future?
In any case, thank you again for your precious help.
Keep up the good work, we love it!!!!
Ryade from Paris.
Does this not work with Proxy's? My footage keeps "floating" it won't stick or stay to anything. it is just moving with the camera movement
It's so powerful and fast and easy - well done 👏
Hello, i need some advice please. I have a 45 second IG reel that im trying to add this MTracker 3D to but it wont load. It says Analyzing frames and it gets stuck not even half way thru. I have tried rendering the entire video, checking for FCPX updates, closing down the program, deleting the effect and then adding it back and re-running it but nothing seems to work. My clip was filmed at 4k 30fps and my project is set to those setting as well. What else could i do to make this load all the way?
For this specific question, please refer to our support team, you can easily contact them via chat -> mvfx.co/Chat
When we will get M tracker 3d for davinci resolve?
So pumped to have this.
If only mtracker actually worked - thus far have not once had it keep an object where I put it an it moves across the footage defeating the pont of "click and drop" requiring manual masking.
Please forward the screen recording with your workflow via chat - we'll take a look! 🧐 mvfx.co/Chat
Thank you guys. This is much better already. It was a bit unclear with the shadows, but it's better than nothing, let's try. Thank you!
Hello, I have FCP. Do I need Apple Motion for your program to work? Or are they two different versions of the same thing?
mTracker 3D works both for FCP and Apple Motion, after purchasing, the product is instantly available for download via mInstaller.
MTracker crashes my FCPX whenever I try and use a logo or drop zone. Says “Lens distortion plug in missing” and then it shuts the plug in off? Is this happen to anyone else? How do you uninstall and reinstall with mInstaller?
Do you have a 10.5 Final Cut Pro? It's necessary.
Yes, brand new iMAC 2020, newly installed Big Sur and updated Final Cut. Everything is brand new and freshly installed
@@paulfrederick7323 Try to uninstall entire plugin with all packs by mInstaller then install again. (Do not use a reinstall, just uninstall then install).
Just amazing! Thank you so very much, this has saved me hours and hours of time. 👍🏻
Glad you've enjoyed it!
Bring THIS to Davinci Resolve and I will be the first to buy it!
When you have a mmTracker 3D for Davincy Resolve ?
mTracker3D is a Motion/FCP only plugin. Porting it to DVR would most likely require several months of rewriting code.🥹
@@motionvfx thank you.
As soon as I try to place the title in the scene, it disappears... what am I doing wrong?
drop us a message via chat mvfx.co/Chat our support team is always there to help 🤗
Hi I just want to verify if mtracker 3d is compatible with the new update of Final Cut Pro 10.6.2 and Apple Motion? I heard some third Party Plugins are having problems with the new update I'm using an Intel Macbook
Nothing reported so far, though it's always recommended to wait a bit with the newest updates (especially, if you're mid-project)
I need help
I do the same steps but it doesn’t show copy
I tried many times and restart the mac but i didn’t show me the word copy
Plz help
It doesn't work at all, this plugins is very bad !! and i don't have the 'info pack" while i bought the Mtracker 3D essential bundle pack !?
As mentioned in the other comment, please reach our Support Team, and we'll do our best to help you!
Please am having an issue after tracking and pasting the text keeps moving. What have i done wrong?
That was beautiful! I have purchased this plugin but never use it so far! but this, hey! This opens a new universe!!! Thanks, man. Keep rocking
Same, my computer slows up entirely too much with these plug ins. but I don’t know why since it’s the newest MacBook Pro, I really wish I could fix the slowness of the rendering and playback of these plug ins because these would be amazing for my videos
I cant find a way to rotate the reflection when my text is overtop water.
hey bro can you add motion blur?
Why some plugins still don't optimize with the Apple M1 chip? Like Scrub, Mfreeze action, bundle plugins!
Because Apple made a brand new chip that requires fxplug4 and many plugins are fxplug3. So they have to be updated. There is a terminal command available on motionVFX.com that you can open fcp through Rosetta and most will work until MVFX is able to update the plugs. Many many devs are dealing with this, and it will take time.
Hi there , I need your help using title 2D 07 on Tracker , I am in M1 macbook pro. the handle doesn't appear sometimes, and when I scale the text, the line doesn't follow. I can't do propositional resizing on both text and line. Also when I use title 2D 04 , I can't find the tools to resize the box. when i try to rotate it, only text rotated but not the box. please help.
and another request, please make a video for tracking text on wall. I don't see any blend mode setup on the text . Only opacity. And hope the callout plugin will be Available soon for M1. tq.
As always, best to contact us via email/ directly from mInstaller up, with screenshots or recordings of the issue. Our address is: support[at]motionvfx.com
So are you guy planing on becoming the element 3D equivalent for fcp?
We have it already and it's called mO2. In fact, it's better than the Element.
@@motionvfx I mean... that’s a pretty bold claim.
It's not a claim, it's true. 🤷♂️
@@motionvfx you have my attention... how is it better?
@@Vitaphone fast, PBR workflow, compositing tools (alpha channel, shadow catcher etc), easy to use and now supports the tracker data :]
mine always says no tracking data available even though I clearly select copy after it is done tracking. I have attempted this multiple times with the same results. Any ideas what I am doing wrong.
Send us some details via chat (mvfx.co/Chat), we'll take a look!
Thanks for the helpful tutorials here, i have a question though. Mtracker 3d doesn´t work in a vertical project for me. Maybe me process is wrong, do I have to start 16:9, processing and then in the end change to vertical ratio 9:16?
Hi! It should work just fine. Feel free to get in touch with our support - you can use chat on our website or contact us at support@motionvfx.com. Feel free to send the footage you're trying to track and we'll give you some tips 💡
Can you add a shadow to the Summit Icon in the Drop Zone or can you not add shadows to a drop zone item?
Yes shadows are in “dropzones 1, 2, and 3.” I mistakenly used dropzone basic which doesn’t hold the shadow catcher. Good catch!
@@SeedCreative id love a tutorial on how you fly through the text in FCPX....... I get about half way through and once the track point is out of frame the text just stops.
How much is it?
Here's the pricing: mvfx.co/mTracker3D, mvfx.co/mTracker3D_Essential_Bundle
Amazing
Thank you so much! This program is fantastic 🔥🔥🔥🔥🔥🔥🔥🔥
I tried all and my text still out of the video and not ending where I want it 😢 hmm and fcp close just editing the Clíp
Feel free to send is the source footage you're trying to track, we'll help! :)
@@motionvfx hi thanks for replaying … I’m still new about this but I’m so exited to learn , can you please tell where I can send the footage ? Thank you !
You can drop a message via chat -> mvfx.co/motionVFX
Does the mtracker 3d work with the new m1 macs?
Yes!
Hi, can you use videos instead of words ?
Yes you can track a dropzone and place the video in the dropzone.
Does it work for DaVinci resolve?
It does not.
Amazing
I added a Titles text and a star Pointer to my video. Unfortunately the Titles is in front of the star no matter what I do. Is there any way to send the Titles to the back?
Have you tried placing the title layer beneath the star layer?
@@SeedCreative No but let me try that! Thanks! Sorry if its a dumb question I'm still a newbie. 🤓
@@eddycaballero5438 the only dumb question is the one you don’t ask. Never apologize for wanting to be better!! Hope it helps, and keep asking questions!
@@SeedCreative I’ve been clicking around and can’t find the layer info. Any advice?