How to cut doors of plastic model kits

Brief video on how I cut the doors of my models. This method does not require using any sharp tool, also, the thinner the thread is, the thinner the cut will be, therefore you will have more precision when cutting.
Background music by JPiXelAnimations - Audio: Crow-Jam

[@c123bthunderpig]

Long time builder here and I have to admit this is a remarkable concept I've got to give it a shot, Thanks for posting it.

[@tianzining]

This is some sort of black magic modeling skill

[@Guerry-3]

Truly this is a very clever technique and makes me so glad that I receive your newsletter. Please keep up the great work.

[@jimbowers8278]

Subscribed for this piece of genius.

[@mikele0228]

thank you so much for posting this technique. I'm going to give it a go!

[@flugwuzzi]

Great Tipp .. so simple and so effective! Thanks for sharing.

[@sanjayram7464]

Dey truly fantastic da thank you. Fuah!!!

[@MsKonrad88]

Helpful tip! Gracias Guillem!

[@mocha2168]

Great tip. Thanks for sharing.

[@janbotha571]

Thank you for the advice 💯😎🤗

[@markstevens5442]

Alternatively, you could just drill a hole in each corner and use a low speed mini - drill to cut the hole. The one I have runs at much lower speeds than most Dremels or similar so will do the job nicely :)

[@mikecrane6096]

Brilliant

[@kevinkerlin5603]

Great tip! Thanks

[@andrewcox4386]

Very cool idea! I would have used a lrger drill & knife to open the door which would probably have taken longer. The door would still be plasticard though 😉

[@lerlo]

Well this is an eye openrr

[@markforster6457]

Thanks!

[@perskjelbred7099]

Amazing!!

[@taxman9910]

I’ve been building models for a very long time and clearly this is something new to me. I am going to give it a go, but a scriber is a much better way to a cleaner cut and less prep work

[@modelrestorations]

Great little tutorial. Just foumd you . Subd!

[@alfiejohnchester8108]

Very interesting. I've not come across this before. Will it work on plastic railway models - i.e. coach doors - I wonder. I'll give it a try. Thanks for the idea.

[@pappytinkers]

I can see where this is better than the back of a hobby blade, but is this better than a saw or scribing blade?

[@jeanmichelbentz53]

It's really thinner than a saw .... thx !!

[@gavanwhatever8196]

So sacrificing the door for a doorway...
I looked at the following video to see if that was addressed but no.

[@leorobidoux4964]

Would this technique work for cuting a model in half? I am turning an A320 into an A319.

[@rocastmodels]

Hello Leo, thanks for your comment! Sure it would work, but in order to keep a straight cut, you can use masking tape as a guide and use the vertical panel lines as reference for a perfect cut.

[@leorobidoux4964]

@@rocastmodels That's genius, thank you I'll be sure to do that.

[@catlady8324]

Is this Charlie Brown with his music? 😹

[@Iskelderon]

If you run into this often enough, just spend a few bucks on a jeweler's saw.

[@jeffholt9437]

Witchcraft!!!!!!!!!