ฝัง
- เผยแพร่เมื่อ 1 พ.ย. 2016
- In this video I show you step by step on how to fix a sagging or rubbing door. Fixing a sagging or rubbing door is much easier than you think, and in most cases can be done in less than 15 minutes.
Follow me on:
youtube: / diydancars
Instagram: / diydancars
Disclaimer:
Due to factors beyond the control of DIYDan, I cannot guarantee against improper use or unauthorized modifications of this information. DIYDan assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk!!!
DIYDanCars is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Your purchase from the above links helps supports this channel and create content for viewers like you. Thank you for your continued support! - แนวปฏิบัติและการใช้ชีวิต
Thanks so much my 3" screws in top hinge did the trick. An old carpenter once told me you can also loosen the lower hinge on the jamb side & insert small strip of a business card shimming it away from jamb moving the top toward the jamb. Thanks again.
Thank you! Trying to fix everything in my new home without paying over priced handy man. This was a life saver. One guy told me the frame of the house was cracked causing the doors to lean smh!
You are so straightforward and concise! Thank You!! Very Helpful 👍🏻👍🏻👍🏻
Great info! Thanks for posting!
Looks great - will try ASAP. Thanxalot.
Thanks man... great video with the perfect advice for my situation. .
Good job keep up the great videos
A very useful, practical demonstration. This was helpful as I'm preparing to adjust a door myself.
Thanks John! Good luck!
Great video I'll give it a try
Awesome man. I’m about to try that.
you just saved me a ton of time and $$$$...thx man, good tip!!!
I love hearing comments like this! No problem! Glad it worked out!
Man didn't think of a longer screw. I used a 2 1/2 inch screw and was able to fix an interior door that was driving me nuts. Can't believe your installer used those wimpy screws on such a heavy door.
SAME! Thanks so much!!!
Thanks!! Thought I'd have up shave down the door to create new holes.
The loose side is on the door side, not the walk side. Do i use the long screw on the door side?
get a knuckle bender wrench--perfect tool for the job. you may need to do other doors in the future
My door hits the floor can’t close it . I will try your method. I will first take a closer look at the screws. Any other thoughts?
Thank you, ☺️
No problem! Happy to help!
If I’m not wrong, I think your hinge pin should be coming from the top down not from the bottom up. Even though the pin is held by friction and pressure, there may be a slim chance it could slide down and out the hinge? Idk. Just doesn’t look right to me. Thanks for the tips!
Thanks and no problem! I think the hinge pin locations vary by manufacture as the door came preassembled that way. I have seen hinge pins installed both ways.
@@DIYDanCars the hinge pin is always supposed to be inserted from the top. Possibly someone put the hinge on the door incorrectly at the factory but the pin is always put in from the top for exactly the reason suggested by 50MT
Helpful video, Dan. How would you adjust a front door sticking at the bottom?
do the same thing with the bottom door hinge, same methods and everything
My laundry room door keep opening just at a fingure push. Please advice if I can do something about it. If you want I can send a video for the problem. Thank you
sounds to me like your strike plate isnt lined up with the door knob so its not seating
Tried this on an interior door and the hinge is too stubborn to move using this method no matter how much force I put in the hammer, and I don't want to break anything or cause the wood to split with too much pressure. Any other ideas? did the screw trick first and that didn't work either.
An adjustable wrench
"Like most things in the west you have to do it yourself" 🤣🤣🤣🤣
#truth
Wait.. how do you fit 3" screw into 1" screw hole? Did you drill it again?
you can drill a pilot hole if you want, but a drill will screw in a 3" screw into wood easily most the time
@@ericks4280 okey wil try it, thanks! Btw change the screws on door's hinge or the door frame's hinges?
door frame, that way they are holding something secure, the studs framing the entryway
Shabby video
Your door is fixed....congratulations. My head is spinning watching this fast video.
You can't please everyone. Sorry for trying to help.
I Have A Bedroom That Is Sagging About A Foot And No One Has Helped Me Do Any Thing About If You Can Help Me And Step By Step Please And Thank You I Don’t Want To Have To Spend Money And Replace The Door
@@dropndeal he means a foot finger size
This time I will do it manually with the help of Woodglut designs.
Looking forward to trying this