How to Fix a Sagging Door
ฝัง
- เผยแพร่เมื่อ 24 ก.ค. 2024
- Leah demonstrates how to correct a sagging door or door that is out of alignment with a tool called a knuckle bender.
Check out the knuckle bender online: amzn.to/2zmrGW5
Support See Jane Drill on Patreon: / seejanedrill
Channel: / seejanedrill
Website: www.seejanedrill.com
Facebook: / seejanedrill
Twitter: / seejanedrill
Email us: leah@seejanedrill.com
Get See Jane Drill T-shirts, mugs and other swag from our Spreadshirt store: shop.spreadshirt.com/seejaned...
Disclaimer:
Due to factors beyond the control of See Jane Drill, we cannot guarantee against improper use or unauthorized modifications of this information. See Jane Drill assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. See Jane Drill recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of See Jane Drill, no information contained on this youtube channel, Facebook page, website and Twitter page shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not See Jane Drill. - แนวปฏิบัติและการใช้ชีวิต
So happy I found your channel. I am an older woman on my own and I find your videos make me realize that I can infact do this.
Leah, In 6 minutes you solved a problem which has perplexed me for years. Thank you!
But why did the video feel like 6 hours?
Amazing and awesome you are!
@dbltrplx its not that deep chill lol
@@DecipherDiz you were in a rush
Leah is the Best !!!!!!!!
Simple, straight forward, and clean edits without any fancy flairs or anything. Thanks for the help Leah!
Thank you Leah! I watch numerous DIY and wood working videos. Yours are my favorites. You do an excellent job of throughly explaining each step. I really appreciate your extensive knowledge. Stay safe
I love your videos. I haven't seen a single one I haven't absolutely loved. Everything from wall texturing to minute fixes. This channel is great! Thanks, Leah!
Exceptional video Leah. You're instructions are so easy to follow that completely understood after one viewing. I got chills when the door was properly aligning. Thanks for sharing your knowledge with us.
Oh, and your production quality is noticeably getting better.
Hi Richy, this is Karen, the See Jane Drill camera person....I thank you very much!!
I love your videos! They started showing up in my searches for home repairs here in the last year or so, and out of all the other information floating around the internet, your videos have been the most encouraging for me with the easiest to follow instructions that work. Thank you! Well, gotta go, have a sagging front door calling my name! ❤️
Great tip Leah! My home just got hit by hurricane Irma and I have a exterior door that's sagging now. So this video is right on time! Thanks again, -Paul
Hey Paul, Hope all is well!
Thanks for all your work Leah! I worked at Lowe's for 3 years, and by watching your videos I was able to help countless customers by referring them to your channel. I used your channel greatly when teaching our local Women's Build for Habitat for Humanity classes. It also helped me work on my own house.
Thanks, Leah. I watched this video a couple years ago and bought the tool knowing I'd likely need it sooner than later. Well, our back door stopped latching due to sagging this week. Another quick view of this video and 5 minutes of adjustment was all it took to solve the problem.
Leah!!! Awesome video and SUPER patient in speaking and SUPER well instructed....i've seen several videos on this subject and you're by far the best! THANK YOU!
There is no one with a passion like yours Leah. Love your work.
thank you, Grant!
I have only seen a few of your videos, but they have all been spot-on! Everything you have said and shown here is absolutely correct -- but, just like about everything else in carpentry, there are different ways to do the same thing.
I've (long retired now) used this same method on, probably, a couple of thousand doors. However I always used an adjustable crescent wrench (had to be a larger one, like a 12")
and did it with the pointy end towards the door and the round side towards where I wanted to roll the hinge. Worked most of the time. When it didn't I would then remove the casing leg (very carefully) and then have enough room to "roll" the hinge further. A matter of time
if you're paid by the job and not by the hour....of course, if it is Your Door, then you'd have to be the "painter" who would have to re-detail the molding and your way could both be longer and shorter, time-wise, until completion of the repair.
I am constantly amazed at the different tools now available (versus 20 years ago), but haven't forgotten that the most important tool any craftsman has is "his/her brain"! Well, you've certainly got it kid. Shown me some very good techniques.
Thanks
Wow, Cheryl, thank you so much. It is always great to hear from a fellow craftsman, and I appreciate you sharing your experience! Best, Leah
Explained with great clarity and without any confusion. I've seen several of her videos and she does a great job.
So I just finished using the Knuckle Buster that you used in this video. It worked great! This works so much better than a standard crescent wrench. Thanks for doing this video. BTW you are the ONLY one on the net that actually shows how to use the wrench. Big help!
Great video!! I had no idea that tool existed! Gonna have to get me one. Makes adjusting the door hinges SO much faster!
I’ve never seen that tool before and it beats a hammer any day for a door adjustment. Thank you Leah, you’ve done it again......
Well Leah, as usual you knocked your tutorial out of the park!! I've watched your videos for a long time....ahhh at least as long as you have been making them; we will leave it at that. Your talent excels in your ability to explain content in a simple way that can be understood by even beginners. Nicely done.
I'd seen these tools over the years and never considered the actual usage. Thanks much, Leah. Really appreciate the knowledge
I just bought this from Fast Cap. Such a sweet little tool. Awesome video, I love listening to you explain. You are amazing.
Omg!!! I ordered the knuckle bender tool off Amazon, followed your steps and my bedroom door that hasn’t closed in years finally closed!!!! Thank you so very much!
I watched your video and just fixed 3 doors that were sagging and touching the frame near the top of the door. All fixed now. You are awesome!
This channel is a perfect example of what makes TH-cam so awesome.
Thank you Leah!
Thank you so much for your videos. Especially this one. Now I can fix my bathroom door! Thanks too for the tool link. Bought the knuckle bender wrench and it'll be here in 3-4 days. Perfect! Merry Christmas, Leah, from my home to yours. 🤗
My first stop for all my home DIY needs is Jane's channel. Love browsing her channel even when repairs aren't needed. Learn a lot.
You are the woman! I do all the maintenance and upkeep around my older home and have never had anyone to learn from. I've always gotten by with I guess and by golly and with a little common sense of thus far. But now anytime I have to fix something I always see if you have a video first just to make sure that my assessment and plans for correcting or fixing the problem coincide with what you have to say. So thank you very much for all the videos that you do you're fabulous and I look forward to more thanks again
Great video, you learn something new everyday. I never knew they made a tool to fix this very common issue. Thanks!
Great video. I've seen people make adjustments and never understood. The tool most of the people I watched used was a wrench. They managed not to deform the barrel, or at least when I was watching. Some metals are thinner and the right tool probably would be the best choice in these days. Thanks useful info.
I applied this method with a pair of vice grips to a heavy bathroom door and it worked great! Thank you for the video! Superbly helpful, God bless you!
teh pointy side would be the same for the vice grip right? I doubt Ill find that tool here
Wow--who knew! Just finished watching my handyman struggle for a couple hours on fixing a sagging door. Gonna share your video with him. WOW!
I love your videos. Straight to the point no music blaring. Awesome info that you need. I was going to ask you for video on this subject and bam when I opened this morning there it was. THANKS!
I love your videos! They’re always a short, sweet, and detailed! Thank you Ms. Leah!
Brilliant! I also have an old Victorian house, with not a straight line in sight. You're videos are invaluable!
Fantastic video leah. Beautiful walk through and execution of the instructions. I will give this a go this weekend. Thanks!
Have viewed many of your videos as they keep popping up in my feed. Thought it was about time I subscribed 👍
I do a few odd jobs for friends and neighbours so good to have brilliant tip locked away for future reference.
Already learned a lot from you 👏👏👏👏👏
You videos are great Leah. I really appreciate, as I am sure many do, how easily you explain and demonstrate DIY repairs and projects. Thank you ; )
Tee he the maintenance guys at my complex were stunned when I showed them this trick. Thank you. Such a great teacher you are.
Unbelievable. I love hand tools, and I thought that I know most of them, but your wrench surprised me. I saw it for the first time. Great presentation. Thank you Lea👍
Ms. Leah you are grade A and tough as nails! Thank you for keeping me inspired while I take on being my own Ms.Fix-it! Necessity is the mother of mastering new skills as well as invention lol! Im quickly learning that I got this !
Thank you so much! I bought this same tool and fixed numerous doors in a new home I just moved into. Extremely helpful! Thank you so much!
I really enjoy your posts they are very down to earth and well done. You don't assume that your viewers know anything and go step by step, Thanks. So I bought the tool and I am waiting for it to arrive. I think in my case that I will have to shim the hinges as well as adjust them. The door I am fixing is also too far away from the strike plate as well as the sagging. The lock side weatherstipping just barely touches the door edge on the bottom third of the door! This house was built in 2012 so slapdash workmanship is probably the root cause as I have seen no evidence of settling elsewhere. So I'll use this tool to correct the vertical sag and then shim all the hinges to move door closer to strike plate. Once again, thanks for the great videos!!
you're welcome, and good luck with your project!
Leah, I'm glad to know you. You are really good at what you do and we're really good at what you do now, too! Thank you.
Love your videos, and have shared with friends. My dad was a jack of all trades and guided me over the years. He’s gone now, but I’ve found his replacement! Thanks Leah!
wow, that is very nice of you to say...🙂
Very cool! I hadn't even seen that tool before. I have done the method where you pull a hinge screw and replace it with a framing screw to suck the whole door frame towards the framing, but this is different. Now I have an excuse to buy another tool haha. Keep em coming Leah!
Very concise video and showing both methods of fix with clear camera angles. Great job thank you
My door was saggin as well so I watched your video and bought the tool on Amazon and it worked just like in the video .
Thank you for the help
So I'm going to get a knuckle bender and do my doors myself (72 year old eccentric cat lady). I wish she'd show how to do this on a glass storm door where the hinges are tiny. Anyway, I read the reviews of the people who used the exact tool she recommended at the Amazon site she posted...most of the reviews complained about one of the tips breaking off. SO, I'm going to look around and see if I can find one that may be a better quality. But I'm so glad I found her video and specifically looked for just this demonstration! Yay, Leah!!! Good job!
Well Leah, both of your latest video's (that I've watched) came just when I needed them. As always Thanks! 🙂
Thank you so much, Leah. Your videos are always so helpful to all!
Thank you so much for all info. I know these things to some are simple fixes but unless you have done this before it can be a bit scary.I also appreciate that you don’t skip even the simplest step cause those are sometimes the ones that cause a snag. Thanks again
Thanks for this video Leah. In all of my years of maintenance I've never seen this wrench before! Now I know that it exists!
I just ordered the tool! This has been a problem in my home. Thank you!
I used channel locking plyers. Took the door off the hinge and adjusted at the frame. Great video! I still got the concept, even though I did it my way.
I pray this works. Your video is the only one that's relatable at the moment plus I have an old door I don't know why they look for you first. Thanks again
Got my Knucle bender today. I replaced the short screws in the top hinge, with 3" deck screws, and then used the knuckle bender on the top hinge to bring my heavy front door back into alignment. Thanks so much for the video!
you're welcome, Don, glad to hear that your project went well!
I have been in the trades for more than 3 decades I have worked as a framer and finish carpenter and I have never seen that tool before. Thanks.
A locking adjustable wrench will work just as well if a knuckle bender is no available. This is a great video, I fixed two janitorial rooms doors. Thanks a bunch! ! Leah
🙂
Appreciate you taking the time to make the video! I will give it a go. Thank you.
You have one of the best TH-cam channels out there. I love your videos.
thanks, Natasha!
I tried this and it worked 👍🏻
Your videos are very helpful! Thank you!
Another great video Leah. You keep teaching me many handy repair work.
Wow I've been remodeling here in the Chicago area since 1993 I never saw one of those knuckle benders thank you. I'll have to go look for one. Always enjoy your videos thank you
you're welcome, and thanks for watching! I'm from the midwest myself, and have spent a lot of time in your fair city. Also, I put a link in the video description to the knucklebender on Amazon, as I hadn't seen it in any of the big box stores.
I love your videos. You provide easy to follow directions. And not to sound weird your voice is very soothing. Thanks for your videos.
Just found and watched this video, and literally 2 minutes later I've fixed my door. You're awesome, Leah!
Have you ever professionally taught? You are an excellent teacher. Thank you, love your videos!
Leah is a natural born talent. Professional teachers are a different kind of breed. They teach for a living. It's their job. For Leah it's her passion.
Leah is the grandmother. They tell calmly and explain why. A class is to big. Teaching professional can only be done with huge numbers. Or it must be 4 or 5 kids from rich parents, who are not interested anyway.
Leah did more for me and the world then any world leader, any politician.
Leah for president !
Yes we love Leah! I need her to come live w me. I'll cook and clean.
I wish I would have seen this video a few months back Leah. It certainly would have come in handy. Thanks so much for another great tip.
Leah, thank you so much! This was so, so helpful! I think the maker of the knuckle bender tool should pay you a commission! I feel sure a lot of people like me have gone straight from this video to purchase that tool!
Such a good feeling every time she says "You CAN do this."
I feel the same way! Leah is awesome
Leah is a treasure!
I agree. Nobody else like her.
The moment she said that I hit that subscribe button
I don't have this issue but I will definitely know what to do in the future. Thanks again for a wonderful tip.
Leah love your videos. I consider myself handy but had never heard of this! Thanks!
Love this channel! I started as a maintenance person at a rehab facility about a month ago, and I've never had a job like this before, so a lot of your videos have come in handy so far!
That's awesome Leah! I run into this type of thing with my handyman business. I'm going to get that tool.
Thank you so much! Ive been trying t ofix this stupid door for a week and your video is the only one that worked!
Leah, than you. You are articulate and thoughtful. Thank you for sharing your knowledge.
Great video, @seejanedrill - since I don't have a knuckle bender I just use curved jaw pliers with a narrow strip of leather so I don't damage the finish on the hinges. I noticed that even using the knuckle bender the hinges got a little scraped up - might want to try leather as it grips well and doesn't scratch!
Awesome, Thanks again. Love how you teach. Calmness and kindness 👍
Your teaching is amazing, you’re doing great work! Thank you for your video. Your voice reminds me of a news channel reporter 💖
Oh thank you so much!! Thought this would be huge ordeal to fix my sagging door and I was done in 2 minutes thanks to your vid. Thanks!!!
Thank you, Leah! Great video as always...You are a great teacher!
Simple, thorough and informative. I never knew about this. I should be able to fix my door now. Thank u!
Excellent video. I learned a few things not covered in other videos. The detail is much appreciated.
Love your videos Leah and your great personality. Thanks for the tip.
Really positive and crystal clear explanation. Keep up the good work.!!!! Love your vids
Leah , thanks for all you do for us !
As comforting a voice and manner as any mother! No preaching, just good information with a light touch.
Thank you!
This fixed my entry door sticking and having a vacuum effect. This woman is awesome with her vids.
Where have you been all my life? Watched these all day today. Great!!
Thanks so much for this video. I literally just thought yesterday about how to fix a door that is sagging. How nice that I signed online this morning and see your video.
glad the video was "right on time" 🙂
Thanks so much Leah, I've always wondered how this could be fixed. Excellent explanation!
Leah your idea is a lot of fun and easy way correct that point.
As always, a very informative and instructional video. I had the same problem with a door and found the cause of the sag was short hinge screws at the top hinge. I bought some long hinge screw and replaced the old and the door is now aligned perfectly. This is another thing that should be checked before bending the hinges. If the short hinge screws are not snugging the hinge to the jam and door, a hinge adjustment would just be a temporary fix.
Thank you so much. Wife wanted to call a contractor. I knew to look to your channel. $22 tool vs $150 service call. I get to spend the difference on a good bottle of bourbon. And I have a tool to fix any future sagging doors! You're the best.
Leah，
Thank you. 謝謝你。This 6 minuets video helps me to fix my sagging door. Your instructions are so clear and easy to follow. I like all your other videos too. Hope you are doing well. God bless you.
別客氣
This is the absolute best demo fix video, just what I needed, bless you!
Thanks for the lesson. Being a cheapo all the time I did this by hammering the knuckles into the right position and it worked incredibly!
You’re the best Leah
I have a learned a lot from you!
God Bless you!
Thx so much, Leah! I've been tolerating a sag for ten years. For the price of the tool, I'm just gonna change out the hinges.
Damn! I needed to see this video a couple weeks ago! The way I fixed the door sag was to router out the hinge on the door. Your way would have saved me a ton of time. Thanks for this video! Now I know how to do this easier.
Wow!!! You truly have the gift of teaching others! Thank you so much for your generous heart! 😍😗👍💖💟💖👏👏👏 Your knowledge and expertise, ADMIRABLE!! 🤝💟
You are the best with these tips, love these videos! Thank you!
Maybe you could get by without the knuckle bender and put a thick rag over the knuckles and just use a pair of pliers.
Great style and information, Leah. Thanks!