You are the best I have ever found on TH-cam. I enjoy every video you post and find it very interesting to see how you can do the same part with different methods. I am learning faster than before. I struggled for the past two weeks with another video until I found your channel. Thank you so much. I bought a 3D printer first then I was stuck on which program to use and how to learn it, and here I am cruising through the video and building my confidence.
Thank you so much for your comment and encouragement! I am super glad that you found our channel and that you are finding so beneficial. Please keep in touch with us as to your progress. All the best!
That’s a humble comment! Thank you. I often felt that way about tutorials too, but learn tons from them including shortcuts and extra tips and tricks throughout. Remember, that these tutorials will get more and more complex as they proceed. Have you watched any of our other videos yet? We have some more advanced tutorials in our Short Tutorials and CAM playlists. Stay tuned for more and thanks so much for your support! Here are the other playlists as mentioned above: Short Tutorials: th-cam.com/play/PLLm7Yjr9z_z0GjYh4AvGC660HXPbQwB7W.html&si=krT9Zz-zfsQDzHoE Metal CAM th-cam.com/play/PLLm7Yjr9z_z24oVrRH8IOfpblwltoGhbS.html&si=kRrFp1SilzuaPK7x
Thank you for showing the two methods but then combining them into the "correct" way. Love the content and very thorough....will keep watching / liking / and commenting some
Thanks so much for commenting. Glad you’re enjoying it so far. Hope you enjoy our other tutorials too. Please let us know how you’re progressing. All the best!
Greate tutorial for the beginners! Especially good that you cover several ways to reach the goal. And you sounds like a person who likes what he doing ))
Thank you so much for your nice comment and support. We are going to keep trying to improve with our tutorials, and kind comments like yours are super encouraging.
@@learnitalready When I tried fusion foe the first time, I faced the problem when the video is clear but you can't repeat it by your own, the skill is absent .In this case a simple homework task would help much.
You are an excellent instructor, thank you for your good work. By the way, your voice reminds me of another excellent Fusion instructor here on TH-cam.
@@althe111 He’s got some great videos! Glad you are pursuing your learning on Fusion 360 through many sources. Lots to learn with this amazing program.
I like doing sort of a hybrid of this I like the top sketching more, but prefer to use pattern. I didn't do the hard way as using a pattern made more sense. I am curious outside of having a part that has the same size holes/features, but not equally spread out. What are some other use cases for doing the harder method you described?
Excellent comment! You’ve got the main gist of it… sketching the harder way, by sketching each angle, would be used for times when features like holes are not equally spaced or patterned. This tutorial is just showing the basics of being able to come to the same conclusion using different methods to prepare students be able to understand more difficult sketching in the future. I appreciate the comment very much. Thanks for tuning in. Feel free to comment on any tutorial you watch. Take care!
When you click "finish sketch" at 2:47 your drawing switches to an isometric view. I'm unsure as to what I'm doing diffeant, my drawing remains in the "top" view. For those who are experiencing this hover your cursor over the "view cube" upper right, a small "house" looking icon appears over the top left of the view cube, click on the house and your drawing will switch to the isometric view.
Impressive! You’re flying through these tutorials. Over-constrained dimensions happen when you apply two constraints that constrain the exact same feature. Review carefully what you have dimensioned or constrained and try to discern what has been constrained twice.
Sorry it took me so long to reply. I am trying to follow on by doing what you are doing and I can't see it well enough to do EXACTLY what you're doing. so I noticed you have some new videos and I'll try those. Your videos are very good, it's just that I'm slow at this stuff.@@learnitalready
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
You are the best I have ever found on TH-cam. I enjoy every video you post and find it very interesting to see how you can do the same part with different methods. I am learning faster than before. I struggled for the past two weeks with another video until I found your channel. Thank you so much.
I bought a 3D printer first then I was stuck on which program to use and how to learn it, and here I am cruising through the video and building my confidence.
Thank you so much for your comment and encouragement! I am super glad that you found our channel and that you are finding so beneficial. Please keep in touch with us as to your progress. All the best!
At first, I thought your lesson was beneath me🙄. But I stuck it out, and actually found a bit or two that got the brain gears turning. Thanks! 🙂
That’s a humble comment! Thank you. I often felt that way about tutorials too, but learn tons from them including shortcuts and extra tips and tricks throughout. Remember, that these tutorials will get more and more complex as they proceed.
Have you watched any of our other videos yet? We have some more advanced tutorials in our Short Tutorials and CAM playlists.
Stay tuned for more and thanks so much for your support!
Here are the other playlists as mentioned above:
Short Tutorials:
th-cam.com/play/PLLm7Yjr9z_z0GjYh4AvGC660HXPbQwB7W.html&si=krT9Zz-zfsQDzHoE
Metal CAM
th-cam.com/play/PLLm7Yjr9z_z24oVrRH8IOfpblwltoGhbS.html&si=kRrFp1SilzuaPK7x
Thank you for showing the two methods but then combining them into the "correct" way. Love the content and very thorough....will keep watching / liking / and commenting some
Much appreciated! Thank you for your comment and support!
Great introduction to revolve and pattern. I'm going to need to do it a lot more before I'm comfortable with it. :)
Thanks so much for commenting. Glad you’re enjoying it so far. Hope you enjoy our other tutorials too. Please let us know how you’re progressing. All the best!
Greate tutorial for the beginners! Especially good that you cover several ways to reach the goal.
And you sounds like a person who likes what he doing ))
Thank you so much for your nice comment and support. We are going to keep trying to improve with our tutorials, and kind comments like yours are super encouraging.
@@learnitalready When I tried fusion foe the first time, I faced the problem when the video is clear but you can't repeat it by your own, the skill is absent .In this case a simple homework task would help much.
@@artemgoncharenko646 Excellent suggestion. Thank you! I will have to implement that in future tutorials.
Both methods are good but component 2 is easy. in my opinion your teaching is very very best.A lot of thanks
Wow! That is a very kind comment. Thank you so much for saying and for taking the time to write.
Thank you for this series. You are a great teacher..
Thank you so much for commenting and your encouragement. Hope you keep learning with us and enjoy our other tutorials too.
You are an excellent instructor, thank you for your good work. By the way, your voice reminds me of another excellent Fusion instructor here on TH-cam.
Thank you for your comment! That was very kind of you to say. I’m curious to know who I sound like. 🧐
@@learnitalready His name is Vladimir (I think) but he has the Desktop Makes channel.
@@althe111 He’s got some great videos! Glad you are pursuing your learning on Fusion 360 through many sources. Lots to learn with this amazing program.
Another excellent video, another lesson learned, another comment and thumb up for Learn It!
Thank you so much! We are grateful that you enjoy and are benefiting from our tutorials so much.
understandable method and speed carry on the lessons please
Thanks so much!
This is awesome, I am still a little hazy on sketch, component, feature and how they all work together but I'm getting there.
Thanks for letting us know and for your support. We will try and explain that clearly in a feature tutorial. Thanks for the idea.
Great Video ! so easy to follow.
Thanks. So glad you enjoyed it!
I sketched a 1.5 construction line from centerpoint vertical to fid the borehole centerpoint.
Great job! 👏
New to your channel - CAD skills are improving with each video I watch!
Welcome aboard!
A great detailed video with simple explanation of reasons.
Thanks for your comment! Glad you enjoyed it!
that was another great video. I appreciate you doing this!
Thank you! We appreciate your kind comment and support. Stay tuned for more.
I appreciate your patient explanations.
Thank you!
I like doing sort of a hybrid of this I like the top sketching more, but prefer to use pattern. I didn't do the hard way as using a pattern made more sense.
I am curious outside of having a part that has the same size holes/features, but not equally spread out. What are some other use cases for doing the harder method you described?
Excellent comment!
You’ve got the main gist of it… sketching the harder way, by sketching each angle, would be used for times when features like holes are not equally spaced or patterned. This tutorial is just showing the basics of being able to come to the same conclusion using different methods to prepare students be able to understand more difficult sketching in the future.
I appreciate the comment very much. Thanks for tuning in. Feel free to comment on any tutorial you watch.
Take care!
👍👍😎👍👍
👍
When you click "finish sketch" at 2:47 your drawing switches to an isometric view. I'm unsure as to what I'm doing diffeant, my drawing remains in the "top" view. For those who are experiencing this hover your cursor over the "view cube" upper right, a small "house" looking icon appears over the top left of the view cube, click on the house and your drawing will switch to the isometric view.
Excellent! Thanks for posting this.
When I try to define the second 120 degree angle at 10:25 I get an "overconstrained" error.
Impressive! You’re flying through these tutorials.
Over-constrained dimensions happen when you apply two constraints that constrain the exact same feature. Review carefully what you have dimensioned or constrained and try to discern what has been constrained twice.
A tad frustrated right now.
Hello! What is causing you trouble? Please let us know. We hope to help.
Sorry it took me so long to reply. I am trying to follow on by doing what you are doing and I can't see it well enough to do EXACTLY what you're doing. so I noticed you have some new videos and I'll try those. Your videos are very good, it's just that I'm slow at this stuff.@@learnitalready