I’ve always been a fan of Collinite waxes and when I seen you showcase this one I ordered it immediately and it was just delivered now just got to wait for the days of rain to past. I’m so excited to apply it thank you for being us great product reviews.
Again another amazing video Jon, the amazing job you do for all of us is outstanding, I have health issues and because of this I always ask Jon for advice. He's been the kindest most helpful guy on the internet. His reviews are honest and reflect the products scientifically not biased at all, he's respected all over the World and for a very good reason. This is another present for the wife to buy me. Thanks Jon.
Hello Jon, value your opinion so to Amazon I went and picked it up without hesitation. Thoroughly washed my car and gave it a shot, instantly rewarded with streaks, horrible actually. Assumed it a problem with the film on the car so tried in on the raw paint, same thing, streak city and it’s a white car. Used a Rupes yellow pad with Sonax Perfect Finish to buff the streaks on a black filmed mirror, with streaks gone I tried again got a terrific result. Plenty of coatings have been used on my ‘21 GTI, Griots 3 in 1 a favorite and apparently they don’t play well together. All that said the decontamination phase seems critical, with a through wash, clay, polish, IP, and application it works as you’ve stated; I’ll be keeping an eye on its durability. Big thanks for the continually entertaining work, greatly appreciated!!
I would have loved to see this compared to the Meguiars hybrid ceramic wax. With your previous tests, you've found the HCW to be one of the best for hydrophobicity and durability, so it would be an interesting comparison. If Collinite is not significantly better, I'll stick to using TAC Systems Moonlight with either Gyeon wet coat or Meguiars HCW as a topper. All of which were bought thanks to your previous recommendations.
Hi John another great video, here in Australia. We have big details stores that will be the sold distributor that being said. Gyeon is quite cheap here probably along the same price as tw and meg. Now this product is only $40 a bottle which is a little bit more expensive than most but not much.
Because of the high price, I’d love if you could do a long term test on how long it lasts on the shelf. I’m ok paying a lot if I know it’s still gonna be fine to use for several years
@@mattx4253...... Yes £24 is a lot of money for many of us, especially for less than 500ml.... Then you'll have postage on top of it too unless buying a load of stuff
Mine just arrived at Malaysia today immediately I apply it on my car. I ordered it through amazon 2 weeks ago. Super easy to use and hope to see how it perform in Malaysia harsh weather
I'm glad you gave all these a good test, i usually don't have alot of money to buy car products, but i do like to use the best and longer lasting products on my car, i try to chose the ones if they do cost alot, that work the best and i can use them once and awhile because they last longer.Thanks for your review.
Hi Jon, I just finished using this new Collinite product and I would agree with you on this one. What’s your opinion on this up against Koch Chemie SoO2 paint sealant? This was my prior go too. Thanks
I wasn't taking these new Colonite products came out but this got me thinking. After years testing loads of products I settled with these which I rotate: Fusso Coat, King of Gloss, Seal & Shine, Sonax BSD and Done and Dusted SiO2. These work well with my 2-3 times a week rinseless wash regime. 😊
U should rly try Stjarnagloss Parla. It beads BSD in durability, which was quite the shocker for me after topping it always after every wash on the fusso coat. There is a video on youtube also with a long term test where it flawlessly survived BSD.
Been using for a while now, so far things are good! Great water behaviour. As for top ups spray on a damp cloth and apply then wipe off. OK yes use and wash cloths , but the cloth doesn't harden as with some others. As for the price point, they do plan to bring out a US gallon size which would half that bottle price, but depends if the UK distributors go for it. [ can get it for under 20 in the UK but what bumps it up is postage ].
i use 303 !graphene spray sealant for my focus, because my poor focus lives outside all year, and it has held on for a long time!I find with sealants that have graphene alittle goes a long way!
Can't find anywhere that has this in stock. Amazon don't have it anymore, and neither do a couple of others that are advertising it. looks like your review has boosted the sales.
so remember you clay to remove contamination. No point sealing a car thats covered in contamination because the sealant is supposed to reduce that. remember you polish to remove haze and swirls. So only you can answer this question. If your car paint is smooth and silky and glossy. then just wash and dry and seal it. Otherwise you need to do whats called full prep.
amazing video man. how do you compare this to the crowd favorite collinite 845? is beadcoat better? also would a beadcoat + meguiar xpress wax as topper a good combo? (xpress wax to be used every wash as maintenance)
Collinite was my first go to wax, 476s and Insolator wax, both great products and very good value for money. Would like to try this, shame on pricing, SIO2 products are expensive though. Would like to see a Snow foam in their range.
yer its actually below the market average for this genre of product in price. dunno felt expensive with what I picked to compare it to. but I have it a group test coming soon.
Love that you’re letting your hair grow out Jon👀👌. By the way I’m bald all over like Paul Dolden 👍Never mind I see 2 days later you go a great haircut 👀
Looks awesome and will be trying it for sure , at the moment Jon i use Autobrite hardcoat and this is very very good at a lot cheaper price . Have you seen this or tested it ? be nice to know your thoughts on the product .
Looks impressive Jon! Be interesting to see how it compares to SiRamik Lustrous+ Graphene Spray Sealant which is a very comparable product, priced similarly as well.
I got my bottle of Beadcoat today. I tested it on a panel and found the initial wipe to be a little tacky, but smooths out during the second and final wipe. I was using a fluffy towel and maybe a shorter nap microfiber would help a bit. This product really reminds me of BSD. It has a similar removal feel and crazy hydrophobic beading like BSD. Anyone else see the similarities?
Hi Jon, newly here. Fab video. Question. I am about to put on my first ceramic coat of cquartz 3.0 uk. It came with reload 2. Having seen this video, I’m wondering weather to bother with reload v2 or just get this instead to top things up in 6 months time? Thoughts? Also how does this compare to cancoat? Cheers
Looks like a great product 👍🏼 How is this different to the spray on rinse off type stuff, like BH Touch-On? Looks great to use, but I’ve been impressed with the longevity of Touch-On, given its ease of use. Cheers, GaryB
Maybe a more fair comparison would be against Gyeon Can Coat Evo. Even that product can get a little testy, esp if the can has been opened for a while. This looks to be as easy as Griots Best in Show!! There is an elephant in the closet I have discovered with Gyeon Can Coat Evo. It has a definite shelf life that no 845 etc ever had!
can coat evo is a light weight ceramic. this beadcoat is water based. but I actually have a video coming soon thats relevent to this trying to strip them both
@ForensicDetailing I bought 2 bottles and will try it on 4 vehicles at end of season. This stuff has gotten so good. I see no need for more. If it gives you 12 months v 6, I think the price becomes quite commensurate with the durability
I'd love to try this. Can you put it over a ceramic coating? All my cars are currently coated, so probably don't need this. Although one of them is coming up for 4 years, so could probably do with a top up anyway.
@@laurapalmerTDGE On one motor I have Gtechniq, and the other has Gyeon. The Gyeon one is only a couple years old, and still looks quality. The Gtechniq is coming up for 4 years now, and while still good, and obviously still there doing something, it probably needs a top up.
Mate the power of your channel has made this product sold out on Ebay and amazon a d most other websites .... can some send me a link to a UK supplier of this as it's sold out if everywhere I look 😂😮
@@ForensicDetailing Happens all the time, once John releases a positive review on a product its sold out everywhere. You have to be quick! I literally cant find this product anywhere in the UK
Looks like a great product Jon. BUT............. When factoring in the cost and a 24 hour cure time, you might aswell just apply a full ceramic coating I think?
the cure time is not a factor really mate. you put it on and you buff it immedietly. all these spray sealants then go through a process of curing but within minutes they cured enough to not really need to worry. its really just a piece of advise so you can max durability out.
@ForensicDetailing thanks Jon. That is interesting to know. I'm formulating plans for what I want to do in preparation for my new car when it finally arrives from the manufacturer.
C2V3 have the potential to last about a year in real world conditions. Another youtuber did a longterm test with it and many other products on a bonnet. Would love to see an indepth comparison with Collinite ceramic spray and the other class leaders.
Probably!what is it? The best lager in the world more to the point am I being a bit of a spotter when I’ve got a good wax on there? Do I need it? Really?
Hi John, did u had a chance tried a OPT Optimum Ultra CERAMIC Seal ?? if not I think you will be much more amaze with hydrophobic and especially with slickness and durability plus this product really boosts colour of sprayed panel. 6 months last if diluted 1:1 3 months. Your BMW will be shine like a star :).
@@ForensicDetailing yes you right, next time when I go on holiday I will bring more bottles and if u interested I can posted to you a bottle on me for you, I`m sure you will be very amaze, also you will have opportunity make another honest video about this sealant, I think you enjoy making those videos and tests.
@@ForensicDetailing thanks for the reply mate, this really looks like a solid all rounder, nearly purchased ahead of your video last week, now I can’t get hold of any!
Is there an alternative i can buy that isnt put on and washed off like the others, i like the idea of me needing to use a cloth etc to put it on with. Meguires hybrid ceramic wax would have been my ideal choice but not the idea of spraying on and jet washing off.
it will interfere with any surface you put it on mate. It will shrink any mineral desposits there and leave a layer or PDMS on top which will alter hydrophobics of the base layer.
@ForensicDetailing Well, technically, it's yours, haha 😄. If that video hadn't dropped there would be loads left.....but then we'd probably have never known how good it was 😉
impossible to answer without testing. but its the ease of use and the feel of it as it goes down on the paintwork thats ace. And then after this the protective performance is top draw. Just try it. Goes on like silk.
Hi Jon, I’ve been using bead maker for the last couple of years I really like the gloss and it lasts months for me in U.K. how does this stuff compare and can I put it straight on over the top of bead maker ?
Any tips on how to use it, eg does it need time to harden? I have used it and found if you touch it after with anything harsher than a micro fibre cloth, it marks?
no mate spray on spray. buff. thats it. dont wash for 24 hours. I dont know what you mean bu it marks. If you touch, clean glossy paint you will leave finger prints in it. If you mean your scratching it afterwards when you touch it then thats not a product thing mate.
I’ve always been a fan of Collinite waxes and when I seen you showcase this one I ordered it immediately and it was just delivered now just got to wait for the days of rain to past. I’m so excited to apply it thank you for being us great product reviews.
Amazon or eBay...ive seen so many different prices?
When Jon is excited, 347000 people listen 😂. Good review Jon, thank you.
Again another amazing video Jon, the amazing job you do for all of us is outstanding, I have health issues and because of this I always ask Jon for advice. He's been the kindest most helpful guy on the internet.
His reviews are honest and reflect the products scientifically not biased at all, he's respected all over the World and for a very good reason.
This is another present for the wife to buy me. Thanks Jon.
very kind words mate. thank you.
typically from this man .... an outstanding technical review.
Hello Jon, value your opinion so to Amazon I went and picked it up without hesitation. Thoroughly washed my car and gave it a shot, instantly rewarded with streaks, horrible actually. Assumed it a problem with the film on the car so tried in on the raw paint, same thing, streak city and it’s a white car. Used a Rupes yellow pad with Sonax Perfect Finish to buff the streaks on a black filmed mirror, with streaks gone I tried again got a terrific result. Plenty of coatings have been used on my ‘21 GTI, Griots 3 in 1 a favorite and apparently they don’t play well together. All that said the decontamination phase seems critical, with a through wash, clay, polish, IP, and application it works as you’ve stated; I’ll be keeping an eye on its durability. Big thanks for the continually entertaining work, greatly appreciated!!
No m8 it doesn't streak at all. you cant easily see streaks on white paint. Email me video of application rover8200@hotmail.
Love the video - your enthusiasm for this gave me no choice - bottle on the way, and looking forward to trying it. Your reviews are awesome!
Just ordered a bottle on Amazon. Great video Jon!
I would have loved to see this compared to the Meguiars hybrid ceramic wax. With your previous tests, you've found the HCW to be one of the best for hydrophobicity and durability, so it would be an interesting comparison. If Collinite is not significantly better, I'll stick to using TAC Systems Moonlight with either Gyeon wet coat or Meguiars HCW as a topper. All of which were bought thanks to your previous recommendations.
Hi John another great video, here in Australia. We have big details stores that will be the sold distributor that being said. Gyeon is quite cheap here probably along the same price as tw and meg. Now this product is only $40 a bottle which is a little bit more expensive than most but not much.
Jon speaks, people buy ! 😊. Out of stock everywhere 😢. Will definitely try this stuff
Im glad i ordered 4 bottles a month ago before this video came out. I felt the exact same way. Stuff i unreal
I bought a bottle this week on the strength of the video title and thumbnail alone. I have just now actually watched the video 🤣🤣
Because of the high price, I’d love if you could do a long term test on how long it lasts on the shelf. I’m ok paying a lot if I know it’s still gonna be fine to use for several years
£24 is a high price? 😂
@@mattx4253 compared to the others yes. He pretty well covered that.
@@mattx4253...... Yes £24 is a lot of money for many of us, especially for less than 500ml.... Then you'll have postage on top of it too unless buying a load of stuff
That bottle will never survive a year here. Let alone “years”.
@@NoFixwhy not ?
Hey Jon! Been following you for a while now. Keep up the great work. Can you somehow review Koch Chemie's SoO2 spray sealant? Would love to see that.
see latest short video showing the line up for upcoming test m8 ;)
Thanks for the heads up, just managed to purchase and use, what a treat 👍👍👍
Mine just arrived at Malaysia today immediately I apply it on my car. I ordered it through amazon 2 weeks ago. Super easy to use and hope to see how it perform in Malaysia harsh weather
I'm glad you gave all these a good test, i usually don't have alot of money to buy car products, but i do like to use the best and longer lasting products on my car, i try to chose the ones if they do cost alot, that work the best and i can use them once and awhile because they last longer.Thanks for your review.
Another great watch.
Thanks John .
Btw the application pad you used - was this a microfiber type??
😊
yes m8 block microfiber
Hi Jon, I just finished using this new Collinite product and I would agree with you on this one. What’s your opinion on this up against Koch Chemie SoO2 paint sealant? This was my prior go too. Thanks
Comparison coming soon.
I wasn't taking these new Colonite products came out but this got me thinking. After years testing loads of products I settled with these which I rotate: Fusso Coat, King of Gloss, Seal & Shine, Sonax BSD and Done and Dusted SiO2. These work well with my 2-3 times a week rinseless wash regime. 😊
U should rly try Stjarnagloss Parla. It beads BSD in durability, which was quite the shocker for me after topping it always after every wash on the fusso coat. There is a video on youtube also with a long term test where it flawlessly survived BSD.
Yer so you have no need for it really you have the same thing. But worth trying it when you run out m8.
Been using for a while now, so far things are good! Great water behaviour. As for top ups spray on a damp cloth and apply then wipe off. OK yes use and wash cloths , but the cloth doesn't harden as with some others. As for the price point, they do plan to bring out a US gallon size which would half that bottle price, but depends if the UK distributors go for it. [ can get it for under 20 in the UK but what bumps it up is postage ].
I gave you a thumbs up for the horse simulation.
i use 303 !graphene spray sealant for my focus, because my poor focus lives outside all year, and it has held on for a long time!I find with sealants that have graphene alittle goes a long way!
It Came into stock again, tested against FLEX Wax by Turtle wax Collinite won hands down for me 🙂
It’s all in the buffage Jon
I'd like to see this vs Pheonix EOD Immortal (the current durability king of spray ceramics).
Can't find anywhere that has this in stock. Amazon don't have it anymore, and neither do a couple of others that are advertising it. looks like your review has boosted the sales.
Hi John thanks for the review, interesting! What is your opinion on this product in comparison to Gyeon Wetcoat, do you prefer the Collenite?
its better to compare with ceramic detailer or cure mate. Wet coat is a spray and rinse beadcote isnt.
Nice video!
Can I use it without polishing or claying beforehand?
so remember you clay to remove contamination. No point sealing a car thats covered in contamination because the sealant is supposed to reduce that.
remember you polish to remove haze and swirls. So only you can answer this question. If your car paint is smooth and silky and glossy. then just wash and dry and seal it. Otherwise you need to do whats called full prep.
@@ForensicDetailing Thanks for the answer. Polishing is not an option right now due to lack of equipment.
amazing video man. how do you compare this to the crowd favorite collinite 845? is beadcoat better? also would a beadcoat + meguiar xpress wax as topper a good combo? (xpress wax to be used every wash as maintenance)
i think these water based spray sealants and now the peoples favorite and have replace paste waxes for lots of people. just quicker to use.
Collinite was my first go to wax, 476s and Insolator wax, both great products and very good value for money.
Would like to try this, shame on pricing, SIO2 products are expensive though.
Would like to see a Snow foam in their range.
yer its actually below the market average for this genre of product in price. dunno felt expensive with what I picked to compare it to. but I have it a group test coming soon.
Another amazing product review 👍🏻🍻😎 Do you think this could be used to water proof a soft top as well?
no m8 its not for that
All you need Jon is wetcoat it’s a proven perfect product
That looks amazing, would be great to see it up against Garage Therapy Ceramic Sealant as that has 5m+ durability, similar ball park
If you're in the UK, Amazon does 5 litres(!) of the Seal and Shine for £24.
I totally loved 476s for certain uses agree they dropped the ball
Love that you’re letting your hair grow out Jon👀👌. By the way I’m bald all over like Paul Dolden 👍Never mind I see 2 days later you go a great haircut 👀
Definitely going to try it, still 10 dollars cheaper than Carpro Reload and Gyeon Cure. Going to have to try their new ceramic detailer as well.
Carpro reload is overrated overpriced rubbish .
Excellent review, looks like a real winner.
Unable to find it on Amazon though?
Looks awesome and will be trying it for sure , at the moment Jon i use Autobrite hardcoat and this is very very good at a lot cheaper price . Have you seen this or tested it ? be nice to know your thoughts on the product .
Looks impressive Jon! Be interesting to see how it compares to SiRamik Lustrous+ Graphene Spray Sealant which is a very comparable product, priced similarly as well.
I got my bottle of Beadcoat today. I tested it on a panel and found the initial wipe to be a little tacky, but smooths out during the second and final wipe. I was using a fluffy towel and maybe a shorter nap microfiber would help a bit. This product really reminds me of BSD. It has a similar removal feel and crazy hydrophobic beading like BSD. Anyone else see the similarities?
Hi Jon, newly here. Fab video. Question. I am about to put on my first ceramic coat of cquartz 3.0 uk. It came with reload 2. Having seen this video, I’m wondering weather to bother with reload v2 or just get this instead to top things up in 6 months time? Thoughts? Also how does this compare to cancoat? Cheers
Stick with reload m8. It's a tested combo
Looks like a good product but a shame that it's unavailable on the link you provided. Could have sold but in less than 24 hours???
Looks like a great product 👍🏼
How is this different to the spray on rinse off type stuff, like BH Touch-On?
Looks great to use, but I’ve been impressed with the longevity of Touch-On, given its ease of use.
Cheers,
GaryB
I talk about difference in a video I shot today mate will publish during the week.
@@ForensicDetailing cheers John, look forward to it 👍🏼
What pads and cloths are you using there Jon? Looks very good that 👌🏻
i think its wax is dead cloths (pink) and I think I used a cheap micofiber block or circle applicator
Maybe a more fair comparison would be against Gyeon Can Coat Evo. Even that product can get a little testy, esp if the can has been opened for a while. This looks to be as easy as Griots Best in Show!!
There is an elephant in the closet I have discovered with Gyeon Can Coat Evo. It has a definite shelf life that no 845 etc ever had!
can coat evo is a light weight ceramic. this beadcoat is water based. but I actually have a video coming soon thats relevent to this trying to strip them both
@ForensicDetailing I bought 2 bottles and will try it on 4 vehicles at end of season. This stuff has gotten so good. I see no need for more. If it gives you 12 months v 6, I think the price becomes quite commensurate with the durability
Great video again Jon, have you ever used chemical guys lucent spray shine ? Would like to see shat you make of this
not tried mate will keep an eye out
Collinite - now, there's a name I haven't heard in a while...
Would be interested to see how this compares to the Turtle Wax graphene detailer
Extremely interested in this.
If you think it's so good Jon, then I trust your opinion.
Shame it's so expensive.
I’m skint watching this channel and no shelf space left………
I'd love to try this. Can you put it over a ceramic coating? All my cars are currently coated, so probably don't need this. Although one of them is coming up for 4 years, so could probably do with a top up anyway.
No need to. It will ruin your coating characteristics.
Which one do you have?
@@laurapalmerTDGE On one motor I have Gtechniq, and the other has Gyeon. The Gyeon one is only a couple years old, and still looks quality. The Gtechniq is coming up for 4 years now, and while still good, and obviously still there doing something, it probably needs a top up.
Probably a good idea to put the product in the title, when you search for Collinite Bead Coat, your video doesn't come up at all.
Mate the power of your channel has made this product sold out on Ebay and amazon a d most other websites .... can some send me a link to a UK supplier of this as it's sold out if everywhere I look 😂😮
Yer I think it's sold out in the UK completely now. It's not channel power it's your love of detailing
@ForensicDetailing yeah all stockists in the USA don't ship here either 😒
@@ForensicDetailing Happens all the time, once John releases a positive review on a product its sold out everywhere. You have to be quick! I literally cant find this product anywhere in the UK
Looks like a great product Jon.
BUT.............
When factoring in the cost and a 24 hour cure time, you might aswell just apply a full ceramic coating I think?
the cure time is not a factor really mate. you put it on and you buff it immedietly. all these spray sealants then go through a process of curing but within minutes they cured enough to not really need to worry. its really just a piece of advise so you can max durability out.
@ForensicDetailing thanks Jon. That is interesting to know.
I'm formulating plans for what I want to do in preparation for my new car when it finally arrives from the manufacturer.
Bloody hell john, did you spray any on your bonce and leave it 24 hours? Looking sharp and trim in the second clip 😅
he loves wheelie bin cut
lol thought that too, but missed a bit on the top , couple of long ones still there 😉
Cheers John.
My car is ceramic coated, still worth getting this or stick with titan quick detailer?
Thanks
this isnt a QD. but I think if you have titan mate that will do the job to maintain the coating.
How does this compare to Gyeon Can Coat Evo?
Thanks Jon, do you think it’s better than Gtech C2v3 ?
Yes
C2V3 have the potential to last about a year in real world conditions. Another youtuber did a longterm test with it and many other products on a bonnet. Would love to see an indepth comparison with Collinite ceramic spray and the other class leaders.
When john says holy cow, it must be decent gear 😊
Did you happen to test applying in direct sunlight or with a warmer panel temperature? Ordered it, looking forward to trying it out.
no applied to good panel mate cool temp. not sure what its like in heat to be fair
does it have any self cleaning of wet coat, could it go on a ceramic coating. be great if as slick and shiny as beadmaker
unknown mate
I got the gyeon ceramic detailer for 18 quid a litre when it first came about. It’s 25 now in in2detailing which I would still pay now to be honest.
Would like to see one of your favourite Tac system Shinee Wax instead of Gyeon in the lineup.
For an at home amateur detailer, is ceramic spray or wax better?
Not sure which one to get out of this or soft99 Kiwami?
It’s sold out everywhere, so it must be as good as you say.
Probably!what is it? The best lager in the world more to the point am I being a bit of a spotter when I’ve got a good wax on there? Do I need it? Really?
Hi John, did u had a chance tried a OPT Optimum Ultra CERAMIC Seal ?? if not I think you will be much more amaze with hydrophobic and especially with slickness and durability plus this product really boosts colour of sprayed panel. 6 months last if diluted 1:1 3 months. Your BMW will be shine like a star :).
not sure you can get it here mate
@@ForensicDetailing yes you right, next time when I go on holiday I will bring more bottles and if u interested I can posted to you a bottle on me for you, I`m sure you will be very amaze, also you will have opportunity make another honest video about this sealant, I think you enjoy making those videos and tests.
better than say tacsystem moonlight ?
That's a true ceramic this is not m8. This is water based sort of like a detail spray. I would guess moon light would last longer.
Hi John, lovely product looks excellent but can I put it over the top of gyeon wax thanks
Simon
untested mate but it would prolly work fine
SONAX HYPERCOAT NEEDS REVIEWING?
Bummer, can’t get in my location in the states. I used to use the insulator wax back in the day on my black vehicles.
This whole time i thought that was called striping, and cross-hatching was what Jon referred to as double cross hatching...
Imran got it in and I think he sold out in a day (got mine) the FDC effect 😂
I aint having it, I'm like Jon at the beginning of the video effing and jeffing like a mofo at the price...... 🤣🤣
Have you had this out in the open air on a car yet, will it help keep the car cleaner or will it be a dust magnet and leave beadmarks?
not sure really mate its hard to tell in summer but its certainly not attracting dust
@@ForensicDetailing thanks for the reply mate, this really looks like a solid all rounder, nearly purchased ahead of your video last week, now I can’t get hold of any!
my pleasure mate thank you for watching the content and commenting without guys like you I have no channel.
Is there an alternative i can buy that isnt put on and washed off like the others, i like the idea of me needing to use a cloth etc to put it on with. Meguires hybrid ceramic wax would have been my ideal choice but not the idea of spraying on and jet washing off.
it will come back in sstock m8
@@ForensicDetailing Hope so soon, i love how hydrophobic the product is and how easy it is to apply.
Paid £23 for 5L of seal n shine making it the winner still for me.
good price that is.
Could you compare this with KochChemie SO02 spray sealant? Similar in price. Thx for the review.
coming soon mate.
Will Koch Chemie FSE somehow interfere with Beadcoat? Might be a nice combination if they play nicley.
it will interfere with any surface you put it on mate. It will shrink any mineral desposits there and leave a layer or PDMS on top which will alter hydrophobics of the base layer.
@@ForensicDetailing If you would have to guess. How long does FSE alter hydrophobics? I feel like it's pretty short lived which is a good thing.
17:10 fresh haircut too 😂
Since this video has dropped- there is no more stock left of Beadcoat left in the UK 😂😢
Your fault 🤣🤣🤣
@ForensicDetailing Well, technically, it's yours, haha 😄. If that video hadn't dropped there would be loads left.....but then we'd probably have never known how good it was 😉
Price on this would be prohibitive you could buy loads of things but ultimately you could buy 2 or 3 different products for the price of this.
Jon is this as glossy as say done and dusted or polishangel rapid waxx?
impossible to answer without testing. but its the ease of use and the feel of it as it goes down on the paintwork thats ace. And then after this the protective performance is top draw. Just try it. Goes on like silk.
Hi Jon, I’ve been using bead maker for the last couple of years I really like the gloss and it lasts months for me in U.K. how does this stuff compare and can I put it straight on over the top of bead maker ?
this is a more durable base line sealant mate. beadmaker is more like a slick topper. This also beads more than beadmaker :)
Beadmaker lasts about a month (for me). Beadcoat claims to last 6+ months.
How does this compare to 303 Graphene? Price diff is only 5 more for this here where I live so negligible really.
it beads more :) and its slicker and lighter to use.
Do you need to throw away the clothes with this one or can they be washed
no mate just wash
Is it cheaper than DIY Detail?
Any tips on how to use it, eg does it need time to harden? I have used it and found if you touch it after with anything harsher than a micro fibre cloth, it marks?
no mate spray on spray. buff. thats it. dont wash for 24 hours. I dont know what you mean bu it marks. If you touch, clean glossy paint you will leave finger prints in it. If you mean your scratching it afterwards when you touch it then thats not a product thing mate.
is this ok over a good quality ceramic coating
Yes
Sorry if this was said in the video, but is there any cure time for this?
8:45
@glaucofranca8098 How did I miss that.. well that's a really long cure time for such a product..
looking good but cant find it for £23.95 , cheapest i could find was ebay £25.95
Gold label car care has it 23.99
how does Collinite Beadmaker compare vs Autoglym Rapid and Griot's 3-in-1 Ceramic?
ive not directly compared but its slicker, and more beady, and better to apply than both of those.
Can't get it anywhere! literally sold out everywhere I've looked
Can this be used regularly on top of a paste wax as a topper?
it can bit its very inefficient use. Use the slickr collinite detail spray for that.
One answer to this……CarPro ReLoad…👍😉👌🇮🇲👍
Wonder how this compares to titan ultra v4
Id like to make a song using many of Jons comments about "the buff"