I did this to my 4 channel amp that’s goes to my 2 rca head unit. Seeing my head unit only had left/right, I put my front rca’s to the left and the back rca’s to the right. So I was able to fade from front to rear by using the balancing adjustment.
Also as FYI, by doing this you lose the ability to fade/move/balance the audio from front to back. Also use caution that the RCA at the back of the radio isn’t for subwoofer only.👍🏼
Damn so it would just stay balanced in the middle? I drive a single cab and the speakers behind my seats are dog shit and I usually have it balanced closer to the front to account for it.
@mr.duckybeatsbruh9173 1st thing is replacing those junky rear speakers, but installing a 4ch amp from a 2 ch radio just means adjusting the Gain properly so it's to your liking 👍
Uhg I'm so confused everything I've read says doing this is the way to keep beable to fade/balance. I'm still confused on how to plug them in if I'm coming from a +(red) do I plug the 2 male ends both into the +(red)on the amp which are both + Right/1front, 1 Rear? Then both coming from the -(white) to the -(white) on the amp F R? Or both to right which would be a + from stereo going to a + and - R,L/front only on amp & then the other 2 from stereo - to + and - R,L/Rear ?? My are all right next to eachother in the square of all 4 not spread like his. I can't see the colors he's plugging them into. I think coming from a + you plug both only to a + even though the splitter Is 2 colors idk uhg and the splitters I found are not red and black they're blue and grey.
What if u can’t with ur head unit because u can’t change the factory radio !!! How do I get sound coming though secondary amp for door speaker ! Do I need a rca splitter to other amp
Hello im still very confused Mine are laid out differently the left side of square are labeled 1 red(R on top), 1 white(L on bottom) but both are for Front only. Then on the right side of square is labeled 1 red(R on top), 1 white(L on bottom) but both Rear..... So is it like that?? Or the on the Y coming from stereo red to 2 red ontop together but both labled Right/ Front and Rear, Then other Y from stereo on bottom 1 White to 2 white labeled Left/front and Rear?? How do i keep the fade and balance? Does trying both ways mess anything up??
The head unit can only send signal to 2 speakers but the amplifier can send it to 4 speakers. This distributes the signal from 2 channels to four. But it is not true stereo.
@@beastmode2990 you can get the signal from two rca and send it to an amp that powers 4 speakers. But you cannot separate the speakers from front to back. Just left to right. If you wire the speakers through the harness then it’ll power however many speakers the OEM radio connects to.
I have a question im running a stereo with 2 sets of rca to a 5 channel amp im having issues wiring it it makes a weird vibration noise can i do something like this or do i need to buy a head unit with 3 set of rca?
I only have two inputs in my car stereo, but 5 rcas (door speakers and sub) would I be able to bridge all 4 door speakers to 1 without any issues and still be able to plug my sub into the other one?
Walmart has a pack that has 2 in it both different so one has to be the correct way. Either 1 female to 2 male (which is usually the right one coming from a stereo) OR 1 male to 2 female. So you would need 2 packs to get the 2 matching what you need then your gona have 2 left over you dont use but theyre only like $4 each. I still don't understand which colors they each plug into though mine is laid out differently then his....
Contact our technical support, they will help you with this matter. Below is the contact email and telephone number: 📱 +55 18 99748-7039 📱 +55 18 99651-7817 📧 support@taramps.com.br
Me too! I'm sooo confused Mine are laid out differently the left side are labeled 1 red(R), 1 white(L) top&bottm but both are Front. Then on the right side is labeled 1 red(R), 1 white(L)on the bottom but both Rear..... So is it like that or the onthe Y coming from stereo 1 red to 2 red ontop together but both labled Right/ Front and Rear, Then other Y from steareo on bottom 1 White to 2 white labeled Left/front and Rear..... Are you having the same issue?
You said channels 1/2 on amp is right and channels 3/4 is left on amp.... but in this video you connected left channel from head unit into "Y" cable right 1/2 and right channel from head unit into "Y" cable left 3/4.. ??!! WTH man?...
Why doesn’t the left and right stay left and right? You made left a channel and right a channel. Shouldn’t you have a left and right perspective channel?
Contact our technical support, they will help you with this matter. Below is the contact email and telephone number: 📱 +55 18 99748-7039 📱 +55 18 99651-7817 📧 support@taramps.com.br
Take some wire preferably 2-8 guage for subs and run it from the amps back side (this is the front in the video) to the subwoofer negative and positive there will be positive and negative holes with screws to hold them for each channel
@@GlutenFree-eI have a sound system that has front and rear but not sub rca connections would using this bridge to combine front/back speaker to front imput on sound system and then the rear for sub?
@ThisDudeZaps Connect rca's from front output of radio to amp using Y cables for your 4 speakers in car.. Then connect rear radio rca's from radio to rear channel of amp for your sub.
Awesome 👍 info. This helped clear some questions that I had about wiring a 4 channel amp to an older deck.
Thank you for this video bro I've been going through hell for 3 days trying to figure out how can I use channel 3 and 4❤
The best way is put the 2 black to 1 channel and 2 clear(brown) to the 2nd channel.
Does this keep the fader/balance feature if you do it this way?
I'm sure thats what he done
@@timothypaul8032no the dude in the video sent all the left signal to the front and all the right signal to the rear lol
Simple thanks for sharing, I installed two extra speakers in my van and looked at the amp and was scratching my head ha ha
I did this to my 4 channel amp that’s goes to my 2 rca head unit. Seeing my head unit only had left/right, I put my front rca’s to the left and the back rca’s to the right. So I was able to fade from front to rear by using the balancing adjustment.
I wish mine was this easy to set up man
Also as FYI, by doing this you lose the ability to fade/move/balance the audio from front to back. Also use caution that the RCA at the back of the radio isn’t for subwoofer only.👍🏼
Damn so it would just stay balanced in the middle? I drive a single cab and the speakers behind my seats are dog shit and I usually have it balanced closer to the front to account for it.
@@mr.duckybeatsbruh9173you’ll need an lc7 line output converter to keep the fade feature
@mr.duckybeatsbruh9173 1st thing is replacing those junky rear speakers, but installing a 4ch amp from a 2 ch radio just means adjusting the Gain properly so it's to your liking 👍
Uhg I'm so confused everything I've read says doing this is the way to keep beable to fade/balance. I'm still confused on how to plug them in if I'm coming from a +(red) do I plug the 2 male ends both into the +(red)on the amp which are both + Right/1front, 1 Rear? Then both coming from the -(white) to the -(white) on the amp F R? Or both to right which would be a + from stereo going to a + and - R,L/front only on amp & then the other 2 from stereo - to + and - R,L/Rear ?? My are all right next to eachother in the square of all 4 not spread like his. I can't see the colors he's plugging them into. I think coming from a + you plug both only to a + even though the splitter Is 2 colors idk uhg and the splitters I found are not red and black they're blue and grey.
Does this affect performance or wattage or anything in any way
No
Instructions unclear. My car is now flying away from me.
What if u can’t with ur head unit because u can’t change the factory radio !!! How do I get sound coming though secondary amp for door speaker ! Do I need a rca splitter to other amp
You need a line output converter it’s like 20 bucks and easy AF to hook up
YEAH SIMPLE IF YOU HAD THE RIGHT WIRES
Will this connect all my speakers to the amp??
i have an rca for zone 1 and 2 on head unit and RCA inputs for chanels 1-4 on amp. How to connect Thank you!
Hello im still very confused Mine are laid out differently the left side of square are labeled 1 red(R on top), 1 white(L on bottom) but both are for Front only. Then on the right side of square is labeled 1 red(R on top), 1 white(L on bottom) but both Rear..... So is it like that?? Or the on the Y coming from stereo red to 2 red ontop together but both labled Right/ Front and Rear, Then other Y from stereo on bottom 1 White to 2 white labeled Left/front and Rear?? How do i keep the fade and balance? Does trying both ways mess anything up??
What does this do?(why bridge two channels) is it for more power?
The head unit can only send signal to 2 speakers but the amplifier can send it to 4 speakers. This distributes the signal from 2 channels to four. But it is not true stereo.
@@drx06most head units can use 4 speakers am i wrong?
@@beastmode2990 you can get the signal from two rca and send it to an amp that powers 4 speakers. But you cannot separate the speakers from front to back. Just left to right.
If you wire the speakers through the harness then it’ll power however many speakers the OEM radio connects to.
How do you connect speakers to ds and TS series amps?
Where can we buy these rca cables
Amazon
Craigslist under free stuff 😂
Where can I buy them bridges
So do I not need a loc if I have rca outputs
You only lose the difference between front and rear speaker, yon only have left right signal
I have a question im running a stereo with 2 sets of rca to a 5 channel amp im having issues wiring it it makes a weird vibration noise can i do something like this or do i need to buy a head unit with 3 set of rca?
Me also i get that weird sound I don't know what is it
I only have two inputs in my car stereo, but 5 rcas (door speakers and sub) would I be able to bridge all 4 door speakers to 1 without any issues and still be able to plug my sub into the other one?
Contact our technical support, they will help you with this matter. Below is the email:
support@taramps.com.br
You'd probalby need an Audio control product to split the signals up and give them a voltage ⚡️ boost at the same time fornthat to work correctly
Audiocontrol LC2i
Where do I find the split connectors at
Having trouble finding already bought 2 set of them but none will connect to each other where can I find the set he is using in the vid??
Walmart has a pack that has 2 in it both different so one has to be the correct way. Either 1 female to 2 male (which is usually the right one coming from a stereo) OR 1 male to 2 female. So you would need 2 packs to get the 2 matching what you need then your gona have 2 left over you dont use but theyre only like $4 each. I still don't understand which colors they each plug into though mine is laid out differently then his....
Nice
😉🤝💥🚀
@@CanalTarampswhat is the radio called u are using
This way you can't get stereo sound
You only lose the difference between front and rear speaker, yon only have left right signal
True 360 has 4ch
If i add a preamp for the subwoofer separately then to a subwoofer amplifier how will be the connection? Do you have a video about it?
Contact our technical support, they will help you with this matter. Below is the contact email and telephone number:
📱 +55 18 99748-7039
📱 +55 18 99651-7817
📧 support@taramps.com.br
Nsme of that wire please?
Great I learned absolutely nothing 👌🏽👌🏽
Me too! I'm sooo confused Mine are laid out differently the left side are labeled 1 red(R), 1 white(L) top&bottm but both are Front. Then on the right side is labeled 1 red(R), 1 white(L)on the bottom but both Rear..... So is it like that or the onthe Y coming from stereo 1 red to 2 red ontop together but both labled Right/ Front and Rear, Then other Y from steareo on bottom 1 White to 2 white labeled Left/front and Rear..... Are you having the same issue?
You said channels 1/2 on amp is right and channels 3/4 is left on amp.... but in this video you connected left channel from head unit into "Y" cable right 1/2 and right channel from head unit into "Y" cable left 3/4.. ??!! WTH man?...
Why doesn’t the left and right stay left and right? You made left a channel and right a channel. Shouldn’t you have a left and right perspective channel?
Contact our technical support, they will help you with this matter. Below is the contact email and telephone number:
📱 +55 18 99748-7039
📱 +55 18 99651-7817
📧 support@taramps.com.br
Really ys no rca block
White goes to white and red goes to red
what size and AWG RCA cable??
4 ohm
What they plus called I bought the wrong kind
Yea and 1 plus 1 equals two 😂
You just hooked up all left channel to one side and all rights to other side. You don't know what you are doing.
DESCULPE MAS TÁ ERRADO, NÃO SAI EFEITO STERIO!😊
So how to connect the subwoofer to the amplifier
Take some wire preferably 2-8 guage for subs and run it from the amps back side (this is the front in the video) to the subwoofer negative and positive there will be positive and negative holes with screws to hold them for each channel
@@GlutenFree-eI have a sound system that has front and rear but not sub rca connections would using this bridge to combine front/back speaker to front imput on sound system and then the rear for sub?
@ThisDudeZaps
Connect rca's from front output of radio to amp using Y cables for your 4 speakers in car..
Then connect rear radio rca's from radio to rear channel of amp for your sub.
Há entendi
The word Bridge does not belong anywhere in this hookup if y'all want real electrical hookups come to my page I won't steer you wrong
That is not a true “bridge”.
All you are doing is separating the channels from the head unit, but not “bridging” the amplifier.
I thought white went to red an black to white
Doesn’t matter both colors same type of wire inside
So no subwoofer this way💀 bro just get a decent headunit
It’s so he can run better mids not for subs no head unit will sound as good as an amp
If his 4 channels amp have another output. It is for subwoofer. RCA output from 4 channels go to RCA input Monoblock.
You’re slow
Is only 80 bucks for a decent one 😂
Errado
No help
Hello @Malcom8181, how can we help?
@@CanalTarampshello, could you make the same video for a 4 channel setup with 2 front speakers and 1 bridged subwoofer ?
Wrong!!! And you're a stereo person? You have to connect the "Y" connectors, (left-left), and (right-right)
Where can I buy these wire