How to Replace Rear Axle Shafts, Bearings, & Seals 1998-2011 Ford Ranger

Buy Now!
New Axle Shaft & Bearing Kit from 1AAuto.com 1aau.to/ib/1AAXS00122
This video shows you how to install new rear axle shafts, bearings, & seals from TRQ on your 1998-2011 Ford Ranger.
This process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Pry Bar 1aau.to/oZI/1AXAA00020
• 13mm Socket 1aau.to/obKo/1AXAA00015
• 19mm Socket 1aau.to/oarE/1AXAA00043
• 8mm Socket 1aau.to/obps/1AXAA00017
• Bearing Puller
• Bearing Race and Seal Driver 1aau.to/oG/1AXAA00038
• Slide Hammer
• 1/2 Inch Impact Gun 1aau.to/ovV/1AXAA00252
• 1/2 Inch Socket 1aau.to/obPc/1AXAA00016
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oHi/1AXSS00035
• Gear Oil
• Gloves 1aau.to/oawU/1AXSS00048
• RTV
• Rust Penetrant
• Safety Glasses
• sanding disc
• Drain Pan
• Floor Jack 1aau.to/oagF/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o5b/1AXAA00065
• Magnet - Extendable
• Razor Blade / Gasket Scraper
• Wheel Chocks
• Wire Brush 1aau.to/ovv/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@CrplCon]

Thank you!! Straight to the point, no over-explaining. Excellent instructional. Me and my Ranger appreciate you!

[@joebloe1152]

excellent video and quality detailed explanation. Thank you very much.

[@johnm840]

Nice details and presentation.

[@joycegiasson5219]

Thanks for sharing. Good job.

[@felixcalderon574]

Very good job thanks

[@user-fu8km8xn5r]

What’s that bearing puller called ?

[@wakaphwap]

great video!

[@tarekegnhabte3612]

I had Ford ranger rear axel oil seal is leaking. It is very hard to find the part here. Its part number is EB3G-1177-AA. If anyone knows the three sizes thickness center and outer diameter would be helpful to purchase aftermarket by size.