Speedometer Cluster Diagnostic Test - Nissan Micra K12

How to run a diagnostic test on the instrument panel (speedometer) on a Nissan Micra K12 from years 2003 to 2010. The malfunction chart is in the description below. If you need to replace the instrument cluster, click on this link: • Instrument Cluster Rem...
Thanks for watching. Please comment, like and subscribe !.
Malfunction Chart for “Error 1” and “Error E”:
Error ‘1’ (Bit 0 to 3)
Bit ‘0’ (Speedometer input signal)
Bit ‘0’ displaying ‘1’ - No input signal. When no signal is detected for 30 seconds continuously with the ignition ON, it should be judged as signal malfunction (If input signal is detected later, then the error will be cancelled immediately.)
Bit ‘0’ displaying ‘2’ - Unusual input signal. When any signal of frequency which would not exist in normal conditions is detected, it should be judged as signal malfunction.
Bit ‘0’ displaying ‘0’ - No Malfunction
Bit ‘1’ (Tachometer input signal)
Bit ‘1’ displaying ‘1’ - No input signal. When no signal is detected for 30 seconds continuously with the ignition ON, it should be judged as signal malfunction (If input signal is detected later, then the error will be cancelled immediately.)
Bit ‘1’ displaying ‘2’ - Unusual input signal. When any signal of frequency which would not exist in normal conditions is detected, it should be judged as signal malfunction.
Bit ‘1’ displaying ‘0’ - No Malfunction
Bit ‘2’ (Fuel level input signal)
Bit ‘2’ displaying ‘1’ - Short circuit. When short circuit of the signal line is detected for 5 seconds or more, it should be judged as short-circuit malfunction.
Bit ‘2’ displaying ‘2’ - Open circuit. When short circuit of the signal line is detected for 5 seconds or more, it should be judged as open-circuit malfunction.
Bit ‘2’ displaying ‘0’ - No Malfunction
Bit ‘3’ (Water Temperature input signal)
Bit ‘3’ displaying ‘1’ - Short circuit. When short circuit of the signal line is detected for 5 seconds or more, it should be judged as short-circuit malfunction.
Bit ‘3’ displaying ‘2’ - Open circuit. When short circuit of the signal line is detected for 5 seconds or more, it should be judged as open-circuit malfunction.
Bit ‘3’ displaying ‘0’ - No Malfunction
Error ‘E’ (Bit 4 to 7)
Bit ‘4’ (Reset buttons)
Short circuit for reset buttons. When the short circuit is continuously detected for 5 seconds or more it should be judged as short-circuit malfunction.
Bit ‘4’ displaying ‘1’ - Right side reset button has malfunctioned
Bit ‘4’ displaying ‘2’ - Left side reset button has malfunctioned
Bit ‘4’ displaying ‘3’ - Both reset buttons have malfunctioned
Bit ‘4’ displaying ‘0’ - No Malfunction
Bit ‘5’ (CPU)
Bit ‘5’ displaying ‘1’ - CPU ram malfunction
Bit ‘5’ displaying ‘0’ - No Malfunction
Bit ‘6’ N/A
Bit ‘7’ N/A
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.